Age | Commit message (Collapse) | Author | Files | Lines |
|
OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and
InOctetsDecrypted were incrementing by the total number of octets in frames
instead of by the number of octets of User Data in frames.
The Controlled Port statistics ifOutOctets and ifInOctets were incrementing
by the total number of octets instead of the number of octets of the MSDUs
plus octets of the destination and source MAC addresses.
The Controlled Port statistics ifInDiscards and ifInErrors were not
incrementing each time the counters they aggregate were.
The Controlled Port statistic ifInErrors was not included in the output of
macsec_get_stats64 so the value was not present in ip commands output.
The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA
were not incrementing.
Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
macsec_add_txsa()
init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.
We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.
This fixes several issues:
- the check in validate_add_rxsa doesn't work with 32-bit attributes
- the checks in validate_add_txsa and validate_upd_sa incorrectly
reject X << 32 (with X != 0)
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.
To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.
Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.
Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new macsec device but not get reference to real_dev. That can
not ensure that real_dev is freed after macsec. That will trigger the
UAF bug for real_dev as following:
==================================================================
BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
Call Trace:
...
macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
dev_get_iflink+0x73/0xe0 net/core/dev.c:637
default_operstate net/core/link_watch.c:42 [inline]
rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54
linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161
Allocated by task 22209:
...
alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549
rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235
veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748
Freed by task 8:
...
kfree+0xd6/0x4d0 mm/slub.c:4552
kvfree+0x42/0x50 mm/util.c:615
device_release+0x9f/0x240 drivers/base/core.c:2229
kobject_cleanup lib/kobject.c:673 [inline]
kobject_release lib/kobject.c:704 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1c8/0x540 lib/kobject.c:721
netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327
After commit faab39f63c1f ("net: allow out-of-order netdev unregistration")
and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we
can add dev_hold_track() in macsec_dev_init() and dev_put_track() in
macsec_free_netdev() to fix the problem.
Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine")
Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.
netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().
netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.
Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.
Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.
Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.
Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers. We will make
netdev->dev_addr a const.
Make sure local references to netdev->dev_addr are constant.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert from ether_addr_copy() to eth_hw_addr_set():
@@
expression dev, np;
@@
- ether_addr_copy(dev->dev_addr, np)
+ eth_hw_addr_set(dev, np)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/macsec.c:113: warning: Function parameter or member 'gro_cells' not described in 'macsec_dev'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-26-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the code by using new function dev_fetch_sw_netstats().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/0d81e0f7-7784-42df-8e10-d0b77ca5b7ee@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
De-referencing skb after call to gro_cells_receive() is not allowed.
We need to fetch skb->len earlier.
Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change places that open-code NLA_POLICY_MIN_LEN() to
use the macro instead, giving us flexibility in how we
handle the details of the macro.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lockdep_set_class_and_subclass() is meant to reduce
the _nested() annotations by assigning a default subclass.
For addr_list_lock, we have to compute the subclass at
run-time as the netdevice topology changes after creation.
So, we should just get rid of these
lockdep_set_class_and_subclass() and stick with our _nested()
annotations.
Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key")
Suggested-by: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dynamic key update for addr_list_lock still causes troubles,
for example the following race condition still exists:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
dev_mc_seq_show() netdev_update_lockdep_key()
-> lockdep_unregister_key()
-> netif_addr_lock_bh()
because lockdep doesn't provide an API to update it atomically.
Therefore, we have to move it back to static keys and use subclass
for nest locking like before.
In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key
changes"), I already reverted most parts of commit ab92d68fc22f
("net: core: add generic lockdep keys").
This patch reverts the rest and also part of commit f3b0a18bb6cb
("net: remove unnecessary variables and callback"). After this
patch, addr_list_lock changes back to using static keys and
subclasses to satisfy lockdep. Thanks to dev->lower_level, we do
not have to change back to ->ndo_get_lock_subclass().
And hopefully this reduces some syzbot lockdep noises too.
Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts were all overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev_update_features() must be called with the rtnl lock taken. Not
doing so triggers a warning, as ASSERT_RTNL() is used in
__netdev_update_features(), the first function called by
netdev_update_features(). Fix this.
Fixes: c850240b6c41 ("net: macsec: report real_dev features when HW offloading is enabled")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reverts the folowing commits:
commit 064ff66e2bef84f1153087612032b5b9eab005bd
"bonding: add missing netdev_update_lockdep_key()"
commit 53d374979ef147ab51f5d632dfe20b14aebeccd0
"net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()"
commit 1f26c0d3d24125992ab0026b0dab16c08df947c7
"net: fix kernel-doc warning in <linux/netdevice.h>"
commit ab92d68fc22f9afab480153bd82a20f6e2533769
"net: core: add generic lockdep keys"
but keeps the addr_list_lock_key because we still lock
addr_list_lock nestedly on stack devices, unlikely xmit_lock
this is safe because we don't take addr_list_lock on any fast
path.
Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).
For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.
By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.
While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.
This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.
When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa86431afbafe15284a3ad5ac19b49b88e3, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.
Signed-off-by: Scott Dial <scott@scottdial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the macsec_changelink(), "struct macsec_tx_sa tx_sc" is used to
store "macsec_secy.tx_sc".
But, the struct type of tx_sc is macsec_tx_sc, not macsec_tx_sa.
So, the macsec_tx_sc should be used instead.
Test commands:
ip link add dummy0 type dummy
ip link add macsec0 link dummy0 type macsec
ip link set macsec0 type macsec encrypt off
Splat looks like:
[61119.963483][ T9335] ==================================================================
[61119.964709][ T9335] BUG: KASAN: slab-out-of-bounds in macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.965787][ T9335] Read of size 160 at addr ffff888020d69c68 by task ip/9335
[61119.966699][ T9335]
[61119.966979][ T9335] CPU: 0 PID: 9335 Comm: ip Not tainted 5.6.0+ #503
[61119.967791][ T9335] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[61119.968914][ T9335] Call Trace:
[61119.969324][ T9335] dump_stack+0x96/0xdb
[61119.969809][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.970554][ T9335] print_address_description.constprop.5+0x1be/0x360
[61119.971294][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.971973][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.972703][ T9335] __kasan_report+0x12a/0x170
[61119.973323][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.973942][ T9335] kasan_report+0xe/0x20
[61119.974397][ T9335] check_memory_region+0x149/0x1a0
[61119.974866][ T9335] memcpy+0x1f/0x50
[61119.975209][ T9335] macsec_changelink.part.34+0xb6/0x200 [macsec]
[61119.975825][ T9335] ? macsec_get_stats64+0x3e0/0x3e0 [macsec]
[61119.976451][ T9335] ? kernel_text_address+0x111/0x120
[61119.976990][ T9335] ? pskb_expand_head+0x25f/0xe10
[61119.977503][ T9335] ? stack_trace_save+0x82/0xb0
[61119.977986][ T9335] ? memset+0x1f/0x40
[61119.978397][ T9335] ? __nla_validate_parse+0x98/0x1ab0
[61119.978936][ T9335] ? macsec_alloc_tfm+0x90/0x90 [macsec]
[61119.979511][ T9335] ? __kasan_slab_free+0x111/0x150
[61119.980021][ T9335] ? kfree+0xce/0x2f0
[61119.980700][ T9335] ? netlink_trim+0x196/0x1f0
[61119.981420][ T9335] ? nla_memcpy+0x90/0x90
[61119.982036][ T9335] ? register_lock_class+0x19e0/0x19e0
[61119.982776][ T9335] ? memcpy+0x34/0x50
[61119.983327][ T9335] __rtnl_newlink+0x922/0x1270
[ ... ]
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE
without checking its presence in the request message, and this causes
a NULL dereference. Fix it rejecting any configuration that does not
include this attribute.
Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com
Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds new netlink attribute to allow a user to (optionally)
specify the desired offload mode immediately upon MACSec link creation.
Separate iproute patch will be required to support this from user space.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes real_dev_feature propagation by MACSec offloaded device.
Issue description:
real_dev features are disabled upon macsec creation.
Root cause:
Features limitation (specific to SW MACSec limitation) is being applied
to HW offloaded case as well.
This causes 'set_features' request on the real_dev with reduced feature
set due to chain propagation.
Proposed solution:
Report real_dev features when HW offloading is enabled.
NB! MACSec offloaded device does not propagate VLAN offload features at
the moment. This can potentially be added later on as a separate patch.
Note: this patch requires HW offloading to be enabled by default in order
to function properly.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When HW offloading is enabled, offloaded stats should be used, because
s/w stats are wrong and out of sync with the HW in this case.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The idea is simple. If the frame is an exact match for the controlled port
(based on DA comparison), then we simply divert this skb to matching port.
Multicast/broadcast messages are delivered to all ports.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offload engine can setup several SecY. Each macsec interface shall have
its own mac address. It will filter a traffic by dest mac address.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds secy pointer initialization in the macsec_context.
It will be used by MAC drivers in offloading operations.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only attach macsec to ethernet devices.
Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.
Macvlan has a similar check in macvlan_port_create.
v1->v2
- fix commit message typo
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netlink support of extended packet number cipher suites,
allows adding and updating XPN macsec interfaces.
Added support in:
* Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites.
* Setting and getting 64bit packet numbers with of SAs.
* Setting (only on SA creation) and getting ssci of SAs.
* Setting salt when installing a SAK.
Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1:
* MACSEC_CIPHER_ID_GCM_AES_XPN_128
* MACSEC_CIPHER_ID_GCM_AES_XPN_256
In addition, added 2 new netlink attribute types:
* MACSEC_SA_ATTR_SSCI
* MACSEC_SA_ATTR_SALT
Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw.
Signed-off-by: Era Mayflower <mayflowerera@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support extended packet number cipher suites (802.1AEbw) frames handling.
This does not include the needed netlink patches.
* Added xpn boolean field to `struct macsec_secy`.
* Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5).
* Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5).
* Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1).
* Created pn_t type for easy access to lower and upper halves.
* Created salt_t type for easy access to the "ssci" and "pn" parts.
* Created `macsec_fill_iv_xpn` function to create IV in XPN mode.
* Support in PN recovery and preliminary replay check in XPN mode.
In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming
frame can be 0 when XPN cipher suite is used, so fixed the function
`macsec_validate_skb` to fail on PN=0 only if XPN is off.
Signed-off-by: Era Mayflower <mayflowerera@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Notify the offload engine about MAC address change to reconfigure it
accordingly.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SCI should be updated, because it contains MAC in its first 6 octets.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing attribute validation for IFLA_MACSEC_PORT
to the netlink policy.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to call macsec_pn_wrapped from hardware drivers to notify when a
PN rolls over. Some drivers might used an interrupt to implement this.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MACsec offloading to underlying hardware devices is disabled by default
(the software implementation is used). This patch adds support for
changing this setting through the MACsec netlink interface. Many checks
are done when enabling offloading on a given MACsec interface as there
are limitations (it must be supported by the hardware, only a single
interface can be offloaded on a given physical device at a time, rules
can't be moved for now).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the MACsec hardware offloading infrastructure.
The main idea here is to re-use the logic and data structures of the
software MACsec implementation. This allows not to duplicate definitions
and structure storing the same kind of information. It also allows to
use a unified genlink interface for both MACsec implementations (so that
the same userspace tool, `ip macsec`, is used with the same arguments).
The MACsec offloading support cannot be disabled if an interface
supports it at the moment.
The MACsec configuration is passed to device drivers supporting it
through macsec_ops which are called from the MACsec genl helpers. Those
functions call the macsec ops of PHY and Ethernet drivers in two steps:
a preparation one, and a commit one. The first step is allowed to fail
and should be used to check if a provided configuration is compatible
with the features provided by a MACsec engine, while the second step is
not allowed to fail and should only be used to enable a given MACsec
configuration. Two extra calls are made: when a virtual MACsec interface
is created and when it is deleted, so that the hardware driver can stay
in sync.
The Rx and TX handlers are modified to take in account the special case
were the MACsec transformation happens in the hardware, whether in a PHY
or in a MAC, as the packets seen by the networking stack on both the
physical and MACsec virtual interface are exactly the same. This leads
to some limitations: the hardware and software implementations can't be
used on the same physical interface, as the policies would be impossible
to fulfill (such as strict validation of the frames). Also only a single
virtual MACsec interface can be offloaded to a physical port supporting
hardware offloading as it would be impossible to guess onto which
interface a given packet should go (for ingress traffic).
Another limitation as of now is that the counters and statistics are not
reported back from the hardware to the software MACsec implementation.
This isn't an issue when using offloaded MACsec transformations, but it
should be added in the future so that the MACsec state can be reported
to the user (which would also improve the debug).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch moves some structure, type and identifier definitions into a
MACsec specific header. This patch does not modify how the MACsec code
is running and only move things around. This is a preparation for the
future MACsec hardware offloading support, which will re-use those
definitions outside macsec.c.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes variables and callback these are related to the nested
device structure.
devices that can be nested have their own nest_level variable that
represents the depth of nested devices.
In the previous patch, new {lower/upper}_level variables are added and
they replace old private nest_level variable.
So, this patch removes all 'nest_level' variables.
In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added
to get lockdep subclass value, which is actually lower nested depth value.
But now, they use the dynamic lockdep key to avoid lockdep warning instead
of the subclass.
So, this patch removes ->ndo_get_lock_subclass() callback.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|