linux - Linux Kernel (branches are rebased on master from time to time)

Age	Commit message (Collapse)	Author	Files	Lines
2006-06-30	Remove obsolete #include <linux/config.h>	Jörn Engel	14	-14/+0
	Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-28	[PATCH] ibm_emac sparse annotations	Al Viro	6	-29/+26
	Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-01-09	[PATCH] PPC44x EMAC driver: disable TX status deferral in half-duplex mode	Eugene Surovegin	2	-2/+3
	Disable TX status deferral (EMACx_MR[MWSW=001]) in half-duplex mode. I have two reports when EMAC stops transmitting when connected to a hub. TX ring debug printouts show complete mess when this happens, probably hardware collision handling doesn't work quite well in this mode. This is relevant only for SoCs with EMAC4 core (440GX, 440SP, 440SPe). Tested on 440GX. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01	[PATCH] ibm_emac: fix graceful stop timeout handling	Eugene Surovegin	2	-9/+31
	This patch fixes graceful stop timeout handling in PPC4xx EMAC driver. Currently, when we stop TX/RX channels we just do some number of loops without relying on actual spent time. This has finally bitten me on one of our systems (heavy network traffic during start up, RX channel is stopped several times to configure multicast list). Graceful channel stop can take up to 1 frame time, so I've added device specific timeout counter which depends on current link speed and calls to udelay() to really wait required amount of time before giving up. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-29	[PATCH] PPC 4xx EMAC driver: fix VSC8201 PHY initialization	Eugene Surovegin	1	-0/+12
	* MII registers must override strap pins * disable "echo" mode to make 10/HDX work (Franz Sirl) Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-29	[PATCH] PPC 44x EMAC driver: add 440GR support	Eugene Surovegin	3	-5/+7
	Add PowerPC 440GR support Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-29	[PATCH] PPC 44x EMAC driver: add 440SPe support	Eugene Surovegin	3	-8/+29
	For some reason, the hardware designers made the polarity of one bit in the 440SPe's PHY interface register the opposite of all other PPC 440 chips. To handle this, abstract our access to this bit and do the right thing based on the configured CPU type. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28	[PATCH] New PowerPC 4xx on-chip ethernet controller driver	Eugene Surovegin	16	-2801/+4028
	This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03	[PATCH] emac: add support for platform-specific unsupported PHY features	Wade Farnsworth	1	-0/+31
	This patch adds support to the ibm_emac driver for platform-specific unsupported PHY features. The patch attempts to determine the highest speed and duplex when autonegotiation is unsupported. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26	[PATCH] bogus iounmap() in emac	Al Viro	1	-1/+1
	Dumb typo: iounmap(&local_pointer_variable). Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23	[PATCH] emac netpoll fix	Al Viro	1	-2/+1
	netpoll is void(struct net_device ), not int(struct net_device ) Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-15	[PATCH] {PATCH] Fix IBM EMAC driver ioctl bug	Geoff Levand	1	-1/+1
	Fix IBM EMAC driver ioctl bug. I found IBM EMAC driver bug. So mii-tool command print wrong status. # mii-tool eth0: 10 Mbit, half duplex, no link eth1: 10 Mbit, half duplex, no link I can get correct status on fixed kernel. # mii-tool eth0: negotiated 100baseTx-FD, link okZZ eth1: negotiated 100baseTx-FD, link ok Hiroaki Fuse Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
2005-04-16	Linux-2.6.12-rc2v2.6.12-rc2	Linus Torvalds	12	-0/+3896
	Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!