summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2018-01-23ixgbe: process the Tx ipsec offloadShannon Nelson5-9/+112
If the skb has a security association referenced in the skb, then set up the Tx descriptor with the ipsec offload bits. While we're here, we fix an oddly named field in the context descriptor struct. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: process the Rx ipsec offloadShannon Nelson3-2/+115
If the chip sees and decrypts an ipsec offload, set up the skb sp pointer with the ralated SA info. Since the chip is rude enough to keep to itself the table index it used for the decryption, we have to do our own table lookup, using the hash for speed. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: restore offloaded SAs after a resetShannon Nelson3-0/+44
On a chip reset most of the table contents are lost, so must be restored. This scans the driver's ipsec tables and restores both the filled and empty table slots to their pre-reset values. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec offload add and remove SAShannon Nelson3-1/+399
Add the functions for setting up and removing offloaded SAs (Security Associations) with the x540 hardware. We set up the callback structure but we don't yet set the hardware feature bit to be sure the XFRM service won't actually try to use us for an offload yet. The software tables are made up to mimic the hardware tables to make it easier to track what's in the hardware, and the SA table index is used for the XFRM offload handle. However, there is a hashing field in the Rx SA tracking that will be used to facilitate faster table searches in the Rx fast path. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec data structuresShannon Nelson2-0/+45
Set up the data structures to be used by the ipsec offload. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec engine start and stop routinesShannon Nelson1-0/+142
Add in the code for running and stopping the hardware ipsec encryption/decryption engine. It is good to keep the engine off when not in use in order to save on the power draw. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec register access routinesShannon Nelson5-0/+222
Add a few routines to make access to the ipsec registers just a little easier, and throw in the beginnings of an initialization. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: clean up ipsec definesShannon Nelson1-13/+7
Clean up the ipsec/macsec descriptor bit definitions to match the rest of the defines and file organization. Also recognise the bit-definition overlap in the error mask macro. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-22nfp: bpf: use extack support to improve debuggingQuentin Monnet3-18/+39
Use the recently added extack support for eBPF offload in the driver. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22nfp: bpf: plumb extack into functions related to XDP offloadQuentin Monnet3-6/+9
Pass a pointer to an extack object to nfp_app_xdp_offload() in order to prepare for extack usage in the nfp driver. Next step will be to forward this extack pointer to nfp_net_bpf_offload(), once this function is able to use it for printing error messages. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: converting spaces into tabs to avoid checkpatch.pl warningSalil Mehta1-2/+2
Spaces were mistakenly used instead of tabs in some of the code related to reset functionality, which caused checkpatch.pl errors. These were missed earlier so fixing them now. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22cxgb3: assign port id to net_device->dev_portArjun Vynipadath1-0/+1
T3 devices have different ports on same PCI function, so using dev_port to identify ports. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: stmmac: Fix reception of Broadcom switches tagsFlorian Fainelli6-7/+39
Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add net status led support for fiber portJian Shen3-0/+113
Check the net status per second, include port speed, total rx/tx packets and link status. Updating the led status for fiber port. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add ethtool -p support for fiber portJian Shen4-0/+104
Add led location support for fiber port. The led will keep blinking when locating. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add manager table initialization for hardwareFuyun Liang2-0/+123
The manager table is empty by default. If it is not initialized, the management pkgs like LLDP will be dropped by hardware. Default entries need to be added to manager table. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add support for get_regsFuyun Liang4-1/+205
This patch adds get_regs support for ethtool cmd. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns: Fix for variable may be used uninitialized warningsHuazhong Tan2-21/+38
When !CONFIG_REGMAP hns throws compiler warnings since dsaf_read_syscon ignores the return result from regmap_read, which allows val to be uninitialized. Fixes: 86897c960b49 ("net: hns: add syscon operation for dsaf") Reported-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: fec: add necessary defines to work on ARM64Lucas Stach2-5/+8
The i.MX8 is a ARMv8 based SoC, that uses the same FEC IP as the earlier, ARMv7 based, i.MX SoCs. Allow the driver to work on ARM64. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: mvpp2: enable ACPI support in the driverMarcin Wojtas1-39/+94
This patch introduces an alternative way of obtaining resources - via ACPI tables provided by firmware. Enabling coexistence with the DT support, in addition to the OF_*->device_*/fwnode_* API replacement, required following steps to be taken: * Add mvpp2_acpi_match table * Omit clock configuration and obtain tclk from the property - in ACPI world, the firmware is responsible for clock maintenance. * Disable comphy and syscon handling as they are not available for ACPI. * Modify way of obtaining interrupts - use newly introduced fwnode_irq_get() routine * Until proper MDIO bus and PHY handling with ACPI is established in the kernel, use only link interrupts feature in the driver. For the RGMII port it results in depending on GMAC settings done during firmware stage. * When booting with ACPI MVPP2_QDIST_MULTI_MODE is picked by default, as there is no need to keep any kind of the backward compatibility. Moreover, a memory region used by mvmdio driver is usually placed in the middle of the address space of the PP2 network controller. The MDIO base address is obtained without requesting memory region (by devm_ioremap() call) in mvmdio.c, later overlapping resources are requested by the network driver, which is responsible for avoiding a concurrent access. In case the MDIO memory region is declared in the ACPI, it can already appear as 'in-use' in the OS. Because it is overlapped by second region of the network controller, make sure it is released, before requesting it again. The care is taken by mvpp2 driver to avoid concurrent access to this memory region. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: mvpp2: use device_*/fwnode_* APIs instead of of_*Marcin Wojtas1-21/+24
OF functions can be used only for the driver using DT. As a preparation for introducing ACPI support in mvpp2 driver, use struct fwnode_handle in order to obtain properties from the hardware description. This patch replaces of_* function with device_*/fwnode_* where possible in the mvpp2. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: mvpp2: simplify maintaining enabled ports' listMarcin Wojtas1-21/+11
'port_count' field of the mvpp2 structure holds an overall amount of available ports, based on DT nodes status. In order to be prepared to support other HW description, obtain the value by incrementing it upon each successful port initialization. This allowed for simplifying port indexing in the controller's private array, whose size is now not dynamically allocated, but fixed to MVPP2_MAX_PORTS. This patch simplifies creating and filling list of enabled ports and is a part of the preparation for adding ACPI support in the mvpp2 driver. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22cxgb4: add geneve offload support for T6Ganesh Goudar4-24/+63
Add geneve segmentation offload support of T6 cards. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22mlxsw: spectrum_router: Remove unnecessary prefix lengths from LPM treeIdo Schimmel1-101/+125
In commit fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") I tried to make sure only used prefix lengths are present in the LPM tree shared between all virtual routers. However, this optimization had to be removed in commit a69518cf0b4c ("mlxsw: spectrum_router: Avoid expensive lookup during route removal"), since determining the used prefix lengths required us to traverse all the active virtual routers, which could result in a hung task depending on the number of VRFs and whether routes were removed due to abort or not. Re-introduce the optimization by moving the prefix usage accounting from the virtual routers to the LPM tree, as this accounting is only used in order to determine the tree's structure. To make the sharing of the trees more explicit, the two trees (for IPv4 and IPv6) are stored in the shared router struct and upon the creation of a virtual router it is immediately bound to both. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22mlxsw: spectrum_router: Pass FIB node to LPM tree unlink functionIdo Schimmel1-4/+6
Next patch will try to optimize the LPM tree and make sure only used prefix lengths are present, to avoid unnecessary look-ups. Pass the currently removed FIB node to the unlinking function as its associated prefix length is a potential candidate for removal from the tree. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22mlxsw: spectrum_router: Use the nodes list as indication for empty FIBIdo Schimmel1-9/+4
Currently, each FIB (IPv4 / IPv6) in a virtual router holds a prefix usage that is used to choose a matching LPM tree, but also to check if the FIB is empty, so that the LPM tree could be unbound. Next patches will remove the reliance on the per-FIB prefix usage for LPM tree matching. Keeping it only to check if the FIB is empty is a waste, since we can use the nodes ({Prefix, Length}) list instead. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: spectrum_acl: Add support for mirror actionArkadi Sharshevsky5-3/+126
Add support for mirror action. Only one mirror action can be set per rule. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: spectrum: Extend mlxsw_afa_ops for counter index and implement for ↵Arkadi Sharshevsky2-0/+52
Spectrum Introduce extension of mlxsw_afa_ops in order to add/del mirroring and implement the ops for Spectrum. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: spectrum: Extend and export SPAN APIArkadi Sharshevsky2-32/+57
Extend SPAN API for ACL case. In case of ACL triggering the MPAR register shouldn't be configured. This patch also export those helpers for ACL usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: spectrum_acl: Add support for mirroring actionArkadi Sharshevsky2-0/+35
The patch extends the trap action for mirroring. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: core: Make counter index allocated inside the action appendJiri Pirko5-35/+82
So far, the caller of mlxsw_afa_block_append_counter needed to allocate counter index by hand. Benefit from the previously introduced resource infra and counter_index_get/put callbacks, and allocate the counter index in place where it is needed, inside the action append function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: core: Convert fwd_entry_ref list to be generic per-block resource listJiri Pirko1-26/+49
Since the resource list needs to be used also for other entries different to fwd_entry_ref, make the list generic. For that purpose, introduce a resource structure with couple of helpers that the code which need to store a per-block resource should use. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21mlxsw: spectrum: Extend mlxsw_afa_ops for counter index and implement for ↵Jiri Pirko2-0/+20
Spectrum Introduce extension of mlxsw_afa_ops in order to get/put counter indexes and implement the ops for Spectrum. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: bump driver version to match aquantia internal numberingIgor Russkikh1-3/+3
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Report correct mediatype via ethtoolIgor Russkikh1-3/+13
For devices with known capabilities of Fibre media type we now report that to ethtool. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce global AQC hardware reset sequenceIgor Russkikh3-29/+183
The detailed reset sequence ensures all HW components are in aligned state before NIC startup. It also supports cards with signed firmware (RBL) and checks if their FW is valid. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce support for new firmware on AQC cardsIgor Russkikh5-4/+257
This defines fw2x operations table and corresponding methods. Some of the functions are being shared with 1.x firmware Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce firmware ops callbacksIgor Russkikh8-81/+101
New AQC cards will have an updated firmware with new binary interface. This patch extracts firmware specific operations into a separate table and prepares for the introduction of new fw 2.x and 3.x Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Change confusing no_ff_addr to more meaningful nameIgor Russkikh4-4/+9
The address to check if HW is not dead/hang could be stored in capabilities, since it is a constant. Change its name to better reflect the idea. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Remove create/destroy from hw opsIgor Russkikh3-54/+0
These ops are not related to HW and are now implemented in pci module. Thus, remove these ops pointers and implementation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Cleanup pci functions moduleIgor Russkikh7-385/+156
Driver contained a dead code of maintaining multiple pci port instances. That will never be used since for each pci function a separate NIC instance is created. Simplify this, making pci module only responsible for pci resource management. NIC initialization is also simplified accordingly. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Convert hw and caps structures to const static pointersIgor Russkikh2-50/+50
This removes unnecessary structure copying, and prepares the driver for separate firmware ops table introduction. We also remove extra copy of capabilities structure (which is const actually) and also replace it with a const pointer in aq_nic_cfg. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce new AQC devices and capabilitiesIgor Russkikh12-159/+239
A number of new AQC devices is going to be released. To support more flexible capabilities management a number of static caps instances is now declared. Devices now are mainly differs by supported speeds, but in future more parameters will be customized. A set of AQC100 devices have fibre media, not twisted pair - this is also reflected in new capabilities definitions. HW level also now directly exports hw_ops for each of A0/B0 hardware. PCI configuration now uses a device configuration table where each device ID is explicitly mapped with hardware OPs and capabilities structures. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce new device ids and constantsIgor Russkikh10-87/+94
New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21Merge tag 'mlx5-updates-2018-01-19' of ↵David S. Miller13-300/+809
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2018-01-19 From: Or Gerlitz <ogerlitz@mellanox.com> ======= First six patches of this series further enhances the mlx5 hairpin support. The first two patches deal with using different hairpin instances for flows whose packets have different priorities to align with the port TX QoS model. The next four patches allow us to do HW spreading of flows over a set of hairpin pairs using RSS. The last two patches change the driver to also set the size of the HW hairpin queues. ======== Next four patches from Eran Ben Elisha <eranbe@mellanox.com>: Add more debug data for TX timeout handling, and further enhance and optimize TX timeout handling upon lost interrupts, which adds a mechanism for explicitly polling EQ in case of a TX timeout in order to recover from a lost interrupt. If this is not the case (no pending EQEs), perform a channels full recovery as usual. From Kamal Heib <kamalh@mellanox.com>, Two patches to extend the stats group API to have an update_stats() callback which will be used to fetch the hardware or software counters data, this will improve the current API and reduce code duplication. From Gal Pressman <galp@mellanox.com>, Last patch, Add likely to the common RX checksum flow. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21nfp: flower: prioritize stats updatesPieter Jansen van Vuuren1-11/+18
Previously it was possible to interrupt processing stats updates because they were handled in a work queue. Interrupting the stats updates could lead to a situation where we backup the control message queue. This patch moves the stats update processing out of the work queue to be processed as soon as hardware sends a request. Reported-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: gemini: Depend on HAS_IOMEMLinus Walleij1-0/+1
The zeroday builder notices that since Usermode Linux does not have IO memory, the build fails for them when selecting everything it can enable. As the driver is clearly using memory-mapped registers to access the network adapter, we add depends on HAS_IOMEM to solve this problem. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-2/+19
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) bpf array map HW offload, from Jakub. 2) support for bpf_get_next_key() for LPM map, from Yonghong. 3) test_verifier now runs loaded programs, from Alexei. 4) xdp cpumap monitoring, from Jesper. 5) variety of tests, cleanups and small x64 JIT optimization, from Daniel. 6) user space can now retrieve HW JITed program, from Jiong. Note there is a minor conflict between Russell's arm32 JIT fixes and removal of bpf_jit_enable variable by Daniel which should be resolved by keeping Russell's comment and removing that variable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-26/+46
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19mlxsw: spectrum: Upper-bound supported FW versionYuval Mintz1-19/+11
During initialization the driver checks whether the flashed FW image suits its requirements by checking that it's sufficiently new. However, there's only a weak backward compatibility scheme that is actually guaranteed by the FW, so driver must also upper bound the version to prevent compatibility issues between current driver and some possible future fw. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-31 12:47:05 +0000