summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-06-16Merge branch '1GbE' of ↵David S. Miller2-51/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-16 This series contains fixes to e1000 and e1000e. Chen fixes an e1000e issue where systems could be waken via WoL, even though the user has disabled the wakeup bit via sysfs. Vaibhav Gupta updates the e1000 driver to clean up the legacy Power Management hooks. Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP preprocessor tags, which also resolves the compiler warnings about the possibility of unused structure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16e1000e: fix unused-function warningArnd Bergmann1-11/+5
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent, leading to a warning about sometimes unused function: drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function] Rather than adding more #ifdefs, just remove them completely and mark the PM functions as __maybe_unused to let the compiler work it out on it own. Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16e1000: use generic power managementVaibhav Gupta1-36/+13
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks. __e1000_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16e1000e: Do not wake up the system via WOL if device wakeup is disabledChen Yu1-4/+10
Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16lan743x: add MODULE_DEVICE_TABLE for module loading aliasTim Harvey1-0/+2
Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mlxsw: spectrum: Adjust headroom buffers for 8x portsIdo Schimmel4-0/+17
The port's headroom buffers are used to store packets while they traverse the device's pipeline and also to store packets that are egress mirrored. On Spectrum-3, ports with eight lanes use two headroom buffers between which the configured headroom size is split. In order to prevent packet loss, multiply the calculated headroom size by two for 8x ports. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mvpp2: remove module bugfixSven Auhagen1-2/+5
The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mvpp2: ethtool rxtx stats fixSven Auhagen1-2/+2
The ethtool rx and tx queue statistics are reporting wrong values. Fix reading out the correct ones. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15rocker: fix incorrect error handling in dma_rings_initAditya Pakki1-2/+2
In rocker_dma_rings_init, the goto blocks in case of errors caused by the functions rocker_dma_cmd_ring_waits_alloc() and rocker_dma_ring_create() are incorrect. The patch fixes the order consistent with cleanup in rocker_dma_rings_fini(). Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: ethernet: mtk-star-emac: simplify interrupt handlingBartosz Golaszewski1-89/+29
During development we tried to make the interrupt handling as fine-grained as possible with TX and RX interrupts being disabled/enabled independently and the counter registers reset from workqueue context. Unfortunately after thorough testing of current mainline, we noticed the driver has become unstable under heavy load. While this is hard to reproduce, it's quite consistent in the driver's current form. This patch proposes to go back to the previous approach of doing all processing in napi context with all interrupts masked in order to make the driver usable in mainline linux. This doesn't impact the performance on pumpkin boards at all and it's in line with what many ethernet drivers do in mainline linux anyway. At the same time we're adding a FIXME comment about the need to improve the interrupt handling. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Return from timer if interface is not in open state.Vasundhara Volam1-1/+1
This will avoid many uneccessary error logs when driver or firmware is in reset. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Fix AER reset logic on 57500 chips.Michael Chan1-5/+12
AER reset should follow the same steps as suspend/resume. We need to free context memory during AER reset and allocate new context memory during recovery by calling bnxt_hwrm_func_qcaps(). We also need to call bnxt_reenable_sriov() to restore the VFs. Fixes: bae361c54fb6 ("bnxt_en: Improve AER slot reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Re-enable SRIOV during resume.Michael Chan1-0/+2
If VFs are enabled, we need to re-configure them during resume because firmware has been reset while resuming. Otherwise, the VFs won't work after resume. Fixes: c16d4ee0e397 ("bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Simplify bnxt_resume().Michael Chan1-12/+2
The separate steps we do in bnxt_resume() can be done more simply by calling bnxt_hwrm_func_qcaps(). This change will add an extra __bnxt_hwrm_func_qcaps() call which is needed anyway on older firmware. Fixes: f9b69d7f6279 ("bnxt_en: Fix suspend/resume path on 57500 chips") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: alx: fix race condition in alx_removeZekun Shen1-4/+5
There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15ibmvnic: Harden device login requestsThomas Falcon1-4/+17
The VNIC driver's "login" command sequence is the final step in the driver's initialization process with device firmware, confirming the available device queue resources to be utilized by the driver. Under high system load, firmware may not respond to the request in a timely manner or may abort the request. In such cases, the driver should reattempt the login command sequence. In case of a device error, the number of retries is bounded. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: macb: Only disable NAPI on the actual error pathCharles Keepax1-5/+4
A recent change added a disable to NAPI into macb_open, this was intended to only happen on the error path but accidentally applies to all paths. This causes NAPI to be disabled on the success path, which leads to the network to no longer functioning. Fixes: 014406babc1f ("net: cadence: macb: disable NAPI on error") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15qlcnic: Use kobj_to_dev() insteadWang Qing1-17/+17
Use kobj_to_dev() instead of container_of() Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: axienet: fix spelling mistake in comment "Exteneded" -> "extended"Colin Ian King1-1/+1
There is a spelling mistake in a comment. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds23-158/+314
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-13net: ethernet: ti: ale: fix allmulti for nu type aleGrygorii Strashko1-9/+40
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13net: ethernet: ti: am65-cpsw-nuss: fix ale parameters initGrygorii Strashko1-1/+1
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada91-411/+411
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12ibmvnic: Flush existing work items before device removalThomas Falcon1-0/+3
Ensure that all scheduled work items have completed before continuing with device removal and after further event scheduling has been halted. This patch fixes a bug where a scheduled driver reset event is processed following device removal. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11ionic: add pcie_print_link_statusShannon Nelson1-0/+1
Print the PCIe link information for our device. Fixes: 77f972a7077d ("ionic: remove support for mgmt device") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11Merge branch '40GbE' of ↵David S. Miller5-63/+177
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-11 This series contains fixes to the iavf driver. Brett fixes the supported link speeds in the iavf driver, which was only able to report speeds that the i40e driver supported and was missing the speeds supported by the ice driver. In addition, fix how 2.5 and 5.0 GbE speeds are reported. Alek fixes a enum comparison that was comparing two different enums that may have different values, so update the comparison to use matching enums. Paul increases the time to complete a reset to allow for 128 VFs to complete a reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11net/mlx5: E-Switch, Fix some error pointer dereferencesDan Carpenter1-2/+4
We can't leave "counter" set to an error pointer. Otherwise either it will lead to an error pointer dereference later in the function or it leads to an error pointer dereference when we call mlx5_fc_destroy(). Fixes: 07bab9502641d ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Don't fail driver on failure to create debugfsLeon Romanovsky1-6/+0
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:6: warning: variable 'err' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!priv->dbg_root) { ^~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1303:9: note: uninitialized use occurs here return err; ^~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:2: note: remove the 'if' if its condition is always false if (!priv->dbg_root) { ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1259:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 warning generated. The check of returned value of debugfs_create_dir() is wrong because by the design debugfs failures should never fail the driver and the check itself was wrong too. The kernel compiled without CONFIG_DEBUG_FS will return ERR_PTR(-ENODEV) and not NULL as expected. Fixes: 11f3b84d7068 ("net/mlx5: Split mdev init and pci init") Link: https://github.com/ClangBuiltLinux/linux/issues/1042 Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: CT: Fix ipv6 nat header rewrite actionsOz Shlomo1-8/+8
Set the ipv6 word fields according to the hardware definitions. Fixes: ac991b48d43c ("net/mlx5e: CT: Offload established flows") Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Fix devlink objects and devlink device unregister sequenceParav Pandit1-14/+13
Current below problems exists. 1. devlink device is registered by mlx5_load_one(). But it is not unregistered by mlx5_unload_one(). This is incorrect. 2. Above issue leads to, When mlx5 PCI device is removed, currently devlink device is unregistered before devlink ports are unregistered in below ladder diagram. remove_one() mlx5_devlink_unregister() [..] devlink_unregister() <- ports are still registered! mlx5_unload_one() mlx5_unregister_device() mlx5_remove_device() mlx5e_remove() mlx5e_devlink_port_unregister() devlink_port_unregister() 3. Condition checking for registering and unregister device are not symmetric either in these routines. Hence, fix the sequence by having load and unload routines symmetric and in right order. i.e. (a) register devlink device followed by registering devlink ports (b) unregister devlink ports followed by devlink device Do this based on boot and cleanup flags instead of different conditions. Fixes: c6acd629eec7 ("net/mlx5e: Add support for devlink-port in non-representors mode") Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Disable reload while removing the deviceParav Pandit2-2/+2
While unregistration is in progress, user might be reloading the interface. This can race with unregistration in below flow which uses the resources which are getting disabled by reload flow. Hence, disable the devlink reloading first when removing the device. CPU0 CPU1 ---- ---- local_pci_remove() devlink_mutex remove_one() devlink_nl_cmd_reload() mlx5_unregister_device() devlink_reload() ops->reload_down() mlx5_unload_one() Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: Fix ethtool hfunc configuration changeAya Levin1-19/+22
Changing RX hash function requires rearranging of RQT internal indexes, the user isn't exposed to such changes and these changes do not affect the user configured indirection table. Rebuild RQ table on hfunc change. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: Fix repeated XSK usage on one channelMaxim Mikityanskiy1-0/+4
After an XSK is closed, the relevant structures in the channel are not zeroed. If an XSK is opened the second time on the same channel without recreating channels, the stray values in the structures will lead to incorrect operation of queues, which causes CQE errors, and the new socket doesn't work at all. This patch fixes the issue by explicitly zeroing XSK-related structs in the channel on XSK close. Note that those structs are zeroed on channel creation, and usually a configuration change (XDP program is set) happens on XSK open, which leads to recreating channels, so typical XSK usecases don't suffer from this issue. However, if XSKs are opened and closed on the same channel without removing the XDP program, this bug reproduces. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: DR, Fix freeing in dr_create_rc_qp()Denis Efremov1-1/+1
Variable "in" in dr_create_rc_qp() is allocated with kvzalloc() and should be freed with kvfree(). Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Fix fatal error handling during device loadShay Drory1-3/+11
Currently, in case of fatal error during mlx5_load_one(), we cannot enter error state until mlx5_load_one() is finished, what can take several minutes until commands will get timeouts, because these commands can't be processed due to the fatal error. Fix it by setting dev->state as MLX5_DEVICE_STATE_INTERNAL_ERROR before requesting the lock. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: drain health workqueue in case of driver load errorShay Drory1-0/+5
In case there is a work in the health WQ when we teardown the driver, in driver load error flow, the health work will try to read dev->iseg, which was already unmap in mlx5_pci_close(). Fix it by draining the health workqueue first thing in mlx5_pci_close(). Trace of the error: BUG: unable to handle page fault for address: ffffb5b141c18014 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 1fe95d067 P4D 1fe95d067 PUD 1fe95e067 PMD 1b7823067 PTE 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 6755 Comm: kworker/u128:2 Not tainted 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? mlx5_health_try_recover+0x4d/0x270 [mlx5_core] mlx5_fw_fatal_reporter_recover+0x16/0x20 [mlx5_core] devlink_health_reporter_recover+0x1c/0x50 devlink_health_report+0xfb/0x240 mlx5_fw_fatal_reporter_err_work+0x65/0xd0 [mlx5_core] process_one_work+0x1fb/0x4e0 ? process_one_work+0x16b/0x4e0 worker_thread+0x4f/0x3d0 kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 ? kthread_cancel_delayed_work_sync+0x20/0x20 ret_from_fork+0x1f/0x30 Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache 8021q garp mrp stp llc ipmi_devintf ipmi_msghandler rpcrdma rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm mlx5_ib ib_uverbs ib_core mlx5_core sb_edac crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 mlxfw crypto_simd cryptd glue_helper input_leds hyperv_fb intel_rapl_perf joydev serio_raw pci_hyperv pci_hyperv_mini mac_hid hv_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel ip_tables x_tables autofs4 hv_utils hid_generic hv_storvsc ptp hid_hyperv hid hv_netvsc hyperv_keyboard pps_core scsi_transport_fc psmouse hv_vmbus i2c_piix4 floppy pata_acpi CR2: ffffb5b141c18014 ---[ end trace b12c5503157cad24 ]--- RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:38 in_atomic(): 0, irqs_disabled(): 1, pid: 6755, name: kworker/u128:2 INFO: lockdep is turned off. CPU: 3 PID: 6755 Comm: kworker/u128:2 Tainted: G D 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: dump_stack+0x63/0x88 ___might_sleep+0x10a/0x130 __might_sleep+0x4a/0x80 exit_signals+0x33/0x230 ? blocking_notifier_call_chain+0x16/0x20 do_exit+0xb1/0xc30 ? kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 Fixes: 52c368dc3da7 ("net/mlx5: Move health and page alloc init to mdev_init") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11iavf: increase reset complete wait timePaul Greenwalt2-7/+9
With an increased number of VFs, it's possible to encounter the following issue during reset. iavf b8d4:00:02.0: Hardware reset detected iavf b8d4:00:02.0: Reset never finished (0) iavf b8d4:00:02.0: Reset task did not complete, VF disabled Increase the reset complete wait count to allow for 128 VFs to complete reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: Fix reporting 2.5 Gb and 5Gb speedsBrett Creeley3-6/+24
Commit 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") added the ability for the PF to report 2.5 and 5Gb speeds, however, the iavf driver does not recognize those speeds as the values were not added there. Add the proper enums and values so that iavf can properly deal with those speeds. Fixes: 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: use appropriate enum for comparisonAleksandr Loktionov4-29/+24
adapter->link_speed has type enum virtchnl_link_speed but our comparisons are against enum iavf_aq_link_speed. Though they are, currently, the same values, change the comparison to the matching enum virtchnl_link_speed since that may not always be the case. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: fix speed reporting over virtchnlBrett Creeley4-21/+120
Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver. Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added. In order to support communicating link speeds over virtchnl in Mbps the following functionality was added: - Added u32 link_speed_mbps in the iavf_adapter structure. - Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps. - Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro. - Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro. - Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove(). Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11ionic: remove support for mgmt deviceShannon Nelson4-25/+0
We no longer support the mgmt device in the ionic driver, so remove the device id and related code. Fixes: b3f064e9746d ("ionic: add support for device id 0x1004") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11drivers: dpaa2: Use devm_kcalloc() in setup_dpni()Xu Wang1-2/+3
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10net: cadence: macb: disable NAPI on errorCorentin Labbe1-1/+4
When the PHY is not working, the macb driver crash on a second try to setup it. [ 78.545994] macb e000b000.ethernet eth0: Could not attach PHY (-19) ifconfig: SIOCSIFFLAGS: No such device [ 78.655457] ------------[ cut here ]------------ [ 78.656014] kernel BUG at /linux-next/include/linux/netdevice.h:521! [ 78.656504] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 78.657079] Modules linked in: [ 78.657795] CPU: 0 PID: 122 Comm: ifconfig Not tainted 5.7.0-next-20200609 #1 [ 78.658202] Hardware name: Xilinx Zynq Platform [ 78.659632] PC is at macb_open+0x220/0x294 [ 78.660160] LR is at 0x0 [ 78.660373] pc : [<c0b0a634>] lr : [<00000000>] psr: 60000013 [ 78.660716] sp : c89ffd70 ip : c8a28800 fp : c199bac0 [ 78.661040] r10: 00000000 r9 : c8838540 r8 : c8838568 [ 78.661362] r7 : 00000001 r6 : c8838000 r5 : c883c000 r4 : 00000000 [ 78.661724] r3 : 00000010 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 78.662187] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 78.662635] Control: 10c5387d Table: 08b64059 DAC: 00000051 [ 78.663035] Process ifconfig (pid: 122, stack limit = 0x(ptrval)) [ 78.663476] Stack: (0xc89ffd70 to 0xc8a00000) [ 78.664121] fd60: 00000000 c89fe000 c8838000 c89fe000 [ 78.664866] fd80: 00000000 c11ff9ac c8838028 00000000 00000000 c0de6f2c 00000001 c1804eec [ 78.665579] fda0: c19b8178 c8838000 00000000 ca760866 c8838000 00000001 00001043 c89fe000 [ 78.666355] fdc0: 00001002 c0de72f4 c89fe000 c0de8dc0 00008914 c89fe000 c199bac0 ca760866 [ 78.667111] fde0: c89ffddc c8838000 00001002 00000000 c8838138 c881010c 00008914 c0de7364 [ 78.667862] fe00: 00000000 c89ffe70 c89fe000 ffffffff c881010c c0e8bd48 00000003 00000000 [ 78.668601] fe20: c8838000 c8810100 39c1118f 00039c11 c89a0960 00001043 00000000 000a26d0 [ 78.669343] fe40: b6f43000 ca760866 c89a0960 00000051 befe6c50 00008914 c8b2a3c0 befe6c50 [ 78.670086] fe60: 00000003 ee610500 00000000 c0e8ef58 30687465 00000000 00000000 00000000 [ 78.670865] fe80: 00001043 00000000 000a26d0 b6f43000 c89a0600 ee40ae7c c8870d00 c0ddabf4 [ 78.671593] fea0: c89ffeec c0ddabf4 c89ffeec c199bac0 00008913 c0ddac48 c89ffeec c89fe000 [ 78.672324] fec0: befe6c50 ca760866 befe6c50 00008914 c89fe000 befe6c50 c8b2a3c0 c0dc00e4 [ 78.673088] fee0: c89a0480 00000201 00000cc0 30687465 00000000 00000000 00000000 00001002 [ 78.673822] ff00: 00000000 000a26d0 b6f43000 ca760866 00008914 c8b2a3c0 000a0ec4 c8b2a3c0 [ 78.674576] ff20: befe6c50 c04b21bc 000d5004 00000817 c89a0480 c0315f94 00000000 00000003 [ 78.675415] ff40: c19a2bc8 c8a3cc00 c89fe000 00000255 00000000 00000000 00000000 000d5000 [ 78.676182] ff60: 000f6000 c180b2a0 00000817 c0315e64 000d5004 c89fffb0 b6ec0c30 ca760866 [ 78.676928] ff80: 00000000 000b609b befe6c50 000a0ec4 00000036 c03002c4 c89fe000 00000036 [ 78.677673] ffa0: 00000000 c03000c0 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.678415] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.679154] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c 20000010 00000003 00000000 00000000 [ 78.681059] [<c0b0a634>] (macb_open) from [<c0de6f2c>] (__dev_open+0xd0/0x154) [ 78.681571] [<c0de6f2c>] (__dev_open) from [<c0de72f4>] (__dev_change_flags+0x16c/0x1c4) [ 78.682015] [<c0de72f4>] (__dev_change_flags) from [<c0de7364>] (dev_change_flags+0x18/0x48) [ 78.682493] [<c0de7364>] (dev_change_flags) from [<c0e8bd48>] (devinet_ioctl+0x5e4/0x75c) [ 78.682945] [<c0e8bd48>] (devinet_ioctl) from [<c0e8ef58>] (inet_ioctl+0x1f0/0x3b4) [ 78.683381] [<c0e8ef58>] (inet_ioctl) from [<c0dc00e4>] (sock_ioctl+0x39c/0x664) [ 78.683818] [<c0dc00e4>] (sock_ioctl) from [<c04b21bc>] (ksys_ioctl+0x2d8/0x9c0) [ 78.684343] [<c04b21bc>] (ksys_ioctl) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) [ 78.684789] Exception stack(0xc89fffa8 to 0xc89ffff0) [ 78.685346] ffa0: 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.686106] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.686710] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c [ 78.687582] Code: 9a000003 e5983078 e3130001 1affffef (e7f001f2) [ 78.688788] ---[ end trace e3f2f6ab69754eae ]--- This is due to NAPI left enabled if macb_phylink_connect() fail. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09net: mvneta: do not redirect frames during reconfigurationLorenzo Bianconi1-0/+13
Disable frames injection in mvneta_xdp_xmit routine during hw re-configuration in order to avoid hardware hangs Fixes: b0a43db9087a ("net: mvneta: add XDP_TX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09ionic: wait on queue start until after IFF_UPShannon Nelson1-2/+2
The netif_running() test looks at __LINK_STATE_START which gets set before ndo_open() is called, there is a window of time between that and when the queues are actually ready to be run. If ionic_check_link_status() notices that the link is up very soon after netif_running() becomes true, it might try to run the queues before they are ready, causing all manner of potential issues. Since the netdev->flags IFF_UP isn't set until after ndo_open() returns, we can wait for that before we allow ionic_check_link_status() to start the queues. On the way back to close, __LINK_STATE_START is cleared before calling ndo_stop(), and IFF_UP is cleared after. Both of these need to be true in order to safely stop the queues from ionic_check_link_status(). Fixes: 49d3b493673a ("ionic: disable the queues on link down") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport18-18/+18
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport18-18/+18
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds12-31/+46
Pull networking fixes from David Miller: - Fix the build with certain Kconfig combinations for the Chelsio inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi. - Fix leak in genetlink, from Cong Lang. - Fix out of bounds packet header accesses in seg6, from Ahmed Abdelsalam. - Two XDP fixes in the ENA driver, from Sameeh Jubran - Use rwsem in device rename instead of a seqcount because this code can sleep, from Ahmed S. Darwish. - Fix WoL regressions in r8169, from Heiner Kallweit. - Fix qed crashes in kdump mode, from Alok Prasad. - Fix the callbacks used for certain thermal zones in mlxsw, from Vadim Pasternak. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) net: dsa: lantiq_gswip: fix and improve the unsupported interface error mlxsw: core: Use different get_trend() callbacks for different thermal zones net: dp83869: Reset return variable if PHY strap is read rhashtable: Drop raw RCU deref in nested_table_free cxgb4: Use kfree() instead kvfree() where appropriate net: qed: fixes crash while running driver in kdump kernel vsock/vmci: make vmci_vsock_transport_cb() static net: ethtool: Fix comment mentioning typo in IS_ENABLED() net: phy: mscc: fix Serdes configuration in vsc8584_config_init net: mscc: Fix OF_MDIO config check net: marvell: Fix OF_MDIO config check net: dp83867: Fix OF_MDIO config check net: dp83869: Fix OF_MDIO config check net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment ethtool: linkinfo: remove an unnecessary NULL check net/xdp: use shift instead of 64 bit division crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled inet_connection_sock: clear inet_num out of destroy helper yam: fix possible memory leak in yam_init_driver lan743x: Use correct MAC_CR configuration for 1 GBit speed ...
2020-06-07mlxsw: core: Use different get_trend() callbacks for different thermal zonesVadim Pasternak1-4/+19
The driver registers three different types of thermal zones: For the ASIC itself, for port modules and for gearboxes. Currently, all three types use the same get_trend() callback which does not work correctly for the ASIC thermal zone. The callback assumes that the device data is of type 'struct mlxsw_thermal_module', whereas for the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data. Fix this by using one get_trend() callback for the ASIC thermal zone and another for the other two types. Fixes: 6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 04:35:03 +0000