summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07net: hns: fix the bug about loopbackyankejian5-1/+65
It will always be passed if the soc is tested the loopback cases. This patch will fix this bug. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07jme: Fix device PM wakeup API usageGuo-Fu Tseng1-4/+2
According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07jme: Do not enable NIC WoL functions on S0Guo-Fu Tseng1-6/+11
Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07be2net: Don't leak iomapped memory on removal.Douglas Miller2-0/+5
The adapter->pcicfg resource is either mapped via pci_iomap() or derived from adapter->db. During be_remove() this resource was ignored and so could remain mapped after remove. Add a flag to track whether adapter->pcicfg was mapped or not, then use that flag in be_unmap_pci_bars() to unmap if required. Fixes: 25848c901 ("use PCI MMIO read instead of config read for errors") Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEMKrzysztof Kozlowski1-0/+1
The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet direct dependencies. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07ibmveth: check return of skb_linearize in ibmveth_start_xmitThomas Falcon1-1/+4
If skb_linearize fails, the driver should drop the packet instead of trying to copy it into the bounce buffer. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: pci: Correctly determine if descriptor queue is fullIdo Schimmel1-1/+1
The descriptor queues for sending (SDQs) and receiving (RDQs) packets are managed by two counters - producer and consumer - which are both 16-bit in size. A queue is considered full when the difference between the two equals the queue's maximum number of descriptors. However, if the producer counter overflows, then it's possible for the full queue check to fail, as it doesn't take the overflow into account. In such a case, descriptors already passed to the device - but for which a completion has yet to be posted - will be overwritten, thereby causing undefined behavior. The above can be achieved under heavy load (~30 netperf instances). Fix that by casting the subtraction result to u16, preventing it from being treated as a signed integer. Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: spectrum: Always decrement bridge's ref countIdo Schimmel1-3/+1
Since we only support one VLAN filtering bridge we need to associate a reference count with it, so that when the last port netdev leaves it, we would know that a different bridge can be offloaded to hardware. When a LAG device is memeber in a bridge and port netdevs are leaving the LAG, we should always decrement the bridge's reference count, as it's incremented for any port in the LAG. Fixes: 4dc236c31733 ("mlxsw: spectrum: Handle port leaving LAG while bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net: eth: altera: do not free array priv->mdio->irqColin Ian King1-1/+0
priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net/ethoc: do not free array priv->mdio->irqColin Ian King1-1/+0
priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06gianfar: Enable eTSEC-106 erratum w/a for MPC8548E Rev2Atsushi Nemoto1-1/+3
Enable workaround for MPC8548E erratum eTSEC 106, "Excess delays when transmitting TOE=1 large frames". (see commit 53fad77375ce "gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1") This erratum was fixed in Rev 3.1.x. Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03be2net: don't enable multicast flag in be_enable_if_filters() routineVenkat Duvvuru2-10/+15
When the interface is opened (in be_open()) the routine be_enable_if_filters() must be called to switch on the basic filtering capabilities of an interface that are not changed at run-time. These include the flags UNTAGGED, BROADCAST and PASS_L3L4_ERRORS. Other flags such as MULTICAST and PROMISC must be enabled later by be_set_rx_mode() based on the state in the netdev/adapter struct. be_enable_if_filters() routine is wrongly trying to enable MULTICAST flag without checking the current adapter state. This can cause the RX_FILTER cmds to the FW to fail. This patch fixes this problem by only enabling the basic filtering flags in be_enable_if_filters(). The VF must be able to issue RX_FILTER cmd with any filter flag, as long as the PF allowed those flags (if_cap_flags) in the iface it provisioned for the VF. This rule is applicable even when the VF doesn't have the FILTMGMT privilege. There is a bug in BE3 FW that wrongly fails RX_FILTER multicast programming cmds on VFs that don't have FILTMGMT privilege. This patch also helps in insulating the VF driver from be_open failures due to the FW bug. A fix for the BE3 FW issue will be available in versions >= 11.0.283.0 and 10.6.334.0 Reported-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: moxa: fix an error codeDan Carpenter1-2/+2
We accidentally return IS_ERR(priv->base) which is 1 instead of PTR_ERR(priv->base) which is the error code. Fixes: 6c821bd9edc9 ('net: Add MOXA ART SoCs ethernet driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: ethernet: renesas: sh_eth: don't open code of_device_get_match_data()Wolfram Sang1-7/+3
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: ethernet: renesas: ravb_main: don't open code of_device_get_match_data()Wolfram Sang1-3/+1
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03ibmvnic: Fix ibmvnic_capability structThomas Falcon2-34/+32
The ibmvnic_capability struct was defined incorrectly. The last two elements of the struct are in the wrong order. In addition, the number element should be 64-bit. Byteswapping functions are updated as well. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03fsl/fman: Initialize fman->dev earlierIgal Liberman1-2/+2
Currently, in a case of error, dev_err is using fman->dev before its initialization and "(NULL device *)" is printed. This patch fixes this issue. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03stmmac: Fix 'eth0: No PHY found' regressionGabriel Fernandez2-11/+9
This patch manages the case when you have an Ethernet MAC with a "fixed link", and not connected to a normal MDIO-managed PHY device. The test of phy_bus_name was not helpful because it was never affected and replaced by the mdio test node. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: do phy_start before resetting hardwareLars Persson1-3/+20
This reverts the changed init order from commit 3647bc35bd42 ("dwc_eth_qos: Reset hardware before PHY start") and makes another fix for the race. It turned out that the reset state machine of the dwceqos hardware requires PHY clocks to be present in order to complete the reset cycle. To plug the race with the phy state machine we defer link speed setting until the hardware init has finished. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: use DWCEQOS_MSG_DEFAULTRabin Vincent1-1/+1
Since debug is hardcoded to 3, the defaults in the DWCEQOS_MSG_DEFAULT macro are never used, which does not seem to be the intended behaviour here. Set debug to -1 like other drivers so that DWCEQOS_MSG_DEFAULT is actually used by default. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: use GFP_KERNEL in dma_alloc_coherent()Rabin Vincent1-2/+2
Since we are in non-atomic context here we can pass GFP_KERNEL to dma_alloc_coherent(). This enables use of the CMA. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: release descriptors outside netif_tx_lockLars Persson1-4/+6
To prepare for using the CMA, we can not be in atomic context when de-allocating DMA buffers. The tx lock was needed only to protect the hw reset against the xmit handler. Now we briefly grab the tx lock while stopping the queue to make sure no thread is inside or will enter the xmit handler. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: fix race condition in dwceqos_start_xmitRabin Vincent1-4/+2
The xmit handler and the tx_reclaim tasklet had a race on the tx_free variable which could lead to a tx timeout if tx_free was updated after the tx complete interrupt. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Allow resetting VF admin mac to zeroJack Morgenstein1-1/+1
The VF administrative mac addresses (stored in the PF driver) are initialized to zero when the PF driver starts up. These addresses may be modified in the PF driver through ndo calls initiated by iproute2 or libvirt. While we allow the PF/host to change the VF admin mac address from zero to a valid unicast mac, we do not allow restoring the VF admin mac to zero. We currently only allow changing this mac to a different unicast mac. This leads to problems when libvirt scripts are used to deal with VF mac addresses, and libvirt attempts to revoke the mac so this host will not use it anymore. Fix this by allowing resetting a VF administrative MAC back to zero. Fixes: 8f7ba3ca12f6 ('net/mlx4: Add set VF mac address support') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by: Moshe Levi <moshele@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Check the correct limitation on VFs for HA modeMoni Shoua1-3/+11
The limit of 63 is only for virtual functions while the actual enforcement was for VFs plus physical functions, fix that. Fixes: e57968a10bc1 ('net/mlx4_core: Support the HA mode for SRIOV VFs too') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Fix lockdep warning in handling of mac/vlan tablesJack Morgenstein1-10/+10
In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. We move to use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2+ #49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation Fixes: 5f61385d2ebc ('net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Provide correct packet/bytes statisticsGal Pressman1-17/+8
Using the HW VPort counters for traffic (rx/tx packets/bytes) statistics is wrong. This is because frames dropped due to steering or out of buffer will be counted as received. To fix that, we move to use the packet/bytes accounting done by the driver for what the netdev reports out. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support [...]') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Add rx/tx bytes software countersGal Pressman3-5/+13
Sum up rx/tx bytes in software as we do for rx/tx packets, to be reported in upcoming statistics fix. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Correctly handle RSS indirection table when changing number of ↵Tariq Toukan3-4/+15
channels Upon changing num_channels, reset the RSS indirection table to match the new value. Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix ethtool RX hash func configuration changeTariq Toukan3-21/+43
We should modify TIRs explicitly to apply the new RSS configuration. The light ndo close/open calls do not "refresh" them. Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix soft lockup when HW Timestamping is enabledEran Ben Elisha1-10/+15
Readers/Writers lock for SW timecounter was acquired without disabling interrupts on local CPU. The problematic scenario: * HW timestamping is enabled * Timestamp overflow periodic service task is running on local CPU and holding write_lock for SW timecounter * Completion arrives, triggers interrupt for local CPU. Interrupt routine calls napi_schedule(), which triggers rx/tx skb process. An attempt to read SW timecounter using read_lock is done, which is already locked by a writer on the same CPU and cause soft lockup. Add irqsave/irqrestore for when using the readers/writers lock for writing. Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix LRO modifyTariq Toukan1-4/+11
Ethtool LRO enable/disable is broken, as of today we only modify TCP TIRs in order to apply the requested configuration. Hardware requires that all TIRs pointing to the same RQ should share the same LRO configuration. For that all other TIRs' LRO fields must be modified as well. Fixes: 5c50368f3831 ('net/mlx5e: Light-weight netdev open/stop') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Remove wrong poll CQ optimizationTariq Toukan4-22/+1
With the MLX5E_CQ_HAS_CQES optimization flag, the following buggy flow might occur: - Suppose RX is always busy, TX has a single packet every second. - We poll a single TX cqe and clear its flag. - We never arm it again as RX is always busy. - TX CQ flag is never changed, and new TX cqes are not polled. We revert this optimization. Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_41~48Chunhao Lin1-4/+0
For RTL8168G/RTL8168H/RTL8411B/RTL8107E, enable this flag to eliminate message "AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x0002 address=0x0000000000003000 flags=0x0050] in dmesg. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix indentation in bnx2x_sp_task()Michal Schmidt1-1/+1
Fix a case of misleading code indentation. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: define event data reserved fields as little-endianMichal Schmidt1-6/+6
For consistency with other event data structs and to lessen the chance of a mistake should one of the reserved fields become used in the future, define the reserved fields as little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: define fields of struct cfc_del_event_data as little-endianMichal Schmidt3-7/+5
There were no missing endianness conversions in this case, but the fields of struct cfc_del_event_data should be defined as little-endian to get rid of the ugly (__force __le32) casts. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: access cfc_del_event only if the opcode is CFC_DELMichal Schmidt1-3/+5
It's not really a bug, but it was odd that bnx2x_eq_int() read the message data as if it were a cfc_del_event regardless of the event type. It's cleaner to access only the appropriate member of union event_data after checking the event opcode. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix receive of VF->PF mailbox messages by the PF on big-endianMichal Schmidt2-5/+7
On ppc64 the PF did not receive messages from VFs correctly. Fields of struct vf_pf_event_data are little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix sending VF->PF messages on big-endianMichal Schmidt1-6/+0
When a VF is sending a message to the PF, it needs to trigger the PF to tell it the message is ready. The trigger did not work on ppc64. No interrupt appeared in the PF. The bug is due to confusion about the layout of struct trigger_vf_zone. In bnx2x_send_msg2pf() the trigger is written using writeb(), not writel(), so the attempt to define the struct with a reversed layout on big-endian is counter-productive. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix crash on big-endian when adding VLANMichal Schmidt3-16/+12
bnx2x crashes during the initialization of the 8021q module on ppc64. The bug is a missing conversion from le32 in bnx2x_handle_classification_eqe() when obtaining the cid value from struct eth_event_data. The fields in struct eth_event_data should all be declared as little-endian and conversions added where missing. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bna: fix list corruptionIvan Vecera1-1/+1
Use list_move_tail() to move MAC address entry from list of pending to list of active entries. Simple list_add_tail() leaves the entry also in the first list, this leads to list corruption. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-293c59x: mask LAST_FRAG bit from length field in ringNeil Horman1-1/+1
Recently, I fixed a bug in 3c59x: commit 6e144419e4da11a9a4977c8d899d7247d94ca338 Author: Neil Horman <nhorman@tuxdriver.com> Date: Wed Jan 13 12:43:54 2016 -0500 3c59x: fix another page map/single unmap imbalance Which correctly rebalanced dma mapping and unmapping types. Unfortunately it introduced a new bug which causes oopses on older systems. When mapping dma regions, the last entry for a packet in the 3c59x tx ring encodes a LAST_FRAG bit, which is encoded as the high order bit of the buffers length field. When it is unmapped the LAST_FRAG bit is cleared prior to being passed to the unmap function. Unfortunately the commit above fails to do that masking. It was missed in testing because the system on which I tested it had an intel iommu, the driver for which ignores the size field, using only the DMA address as the token to identify the mapping to be released. However, on older systems that rely on swiotlb (or other dma drivers that key off that length field), not masking off that LAST_FRAG high order bit results in parsing a huge size to be release, leading to all sorts of odd corruptions and the like. Fix is easy, just mask the length with 0xFFF. It should really be &(LAST_FRAG-1), but 0xFFF is the style of the file, and I'd like to make this fix minimal and correct before making it prettier. Appies to the net tree cleanly. All testing on both iommu and swiommu based systems produce good results Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: thunderx: Fix for Qset error due to CQ fullSunil Goutham3-1/+16
On Thunderx pass 1.x and pass2 due to a HW errata default CQ DROP_LEVEL of 0x80 is not sufficient to avoid CQ_WR_FULL Qset error when packets are being received at >20Mpps resulting in complete stall of packet reception. This patch will configure it to 0x100 which is what is expected by HW on Thunderx. On future passes of thunderx and other chips HW default/reset value will be 0x100 or higher hence not overwritten. Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25r8169:fix "rtl_counters_cond == 1 (loop: 1000, delay: 10)" log spam.Chun-Hao Lin1-2/+12
There will be a log spam when there is no cable plugged. Please refer to following links. https://bugzilla.kernel.org/show_bug.cgi?id=104351 https://bugzilla.kernel.org/show_bug.cgi?id=107421 This issue is caused by runtime power management. When there is no cable plugged, the driver will be suspend (runtime suspend) by OS and NIC will be put into the D3 state. During this time, if OS call rtl8169_get_stats64() to dump tally counter, because NIC is in D3 state, the register value read by driver will return all 0xff. This will let driver think tally counter flag is not toggled and then sends the warning message "rtl_counters_cond == 1 (loop: 1000, delay: 10)" to kernel log. For fixing this issue, 1.add checking driver's pm runtime status in rtl8169_get_stats64(). 2.dump tally counter before going runtime suspend for counter accuracy in runtime suspend. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: qca_spi: clear IFF_TX_SKB_SHARINGStefan Wahren1-0/+1
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: qca_spi: Don't clear IFF_BROADCASTStefan Wahren1-1/+0
Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST. So fix this by keeping the flags from ether_setup. Reported-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net: jme: fix suspend/resume on JMC260Diego Viola1-1/+2
The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351 Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net: ethernet: nb8800: support fixed-link DT nodeSebastian Frias1-1/+13
Under some circumstances, e.g. when connecting to a switch, the ethernet port will not be connected to a PHY. In that case a "fixed-link" DT node can be used to replace it. https://stackoverflow.com/questions/31046172/device-tree-for-phy-less-connection-to-a-dsa-switch This patch adds support for the "fixed-link" node to the nb8800 driver. Signed-off-by: Sebastian Frias <sf84@laposte.net> Acked-by: Mans Rullgard <mans@mansr.com> Cc: Mason <slash.tmp@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23bnxt_en: Fix zero padding of tx push data.Michael Chan1-1/+2
The arithmetic to zero pad the last 64-bit word in the push buffer is not correct. 1. It should be pdata + length to get to the end. 2. 'pdata' is void pointer and passing it to PTR_ALIGN() will cast the aligned pointer to void. Pass 'end' which is u64 pointer to PTR_ALIGN() instead so that the aligned pointer - 1 is the last 64-bit pointer to data. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>