summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2017-07-24net: Convert to using %pOF instead of full_nameRob Herring1-1/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17net: axienet: add support for standard phy-mode bindingAlvaro G. M2-14/+38
Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06net: axienet: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure ndev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-57/+69
2017-02-15net: xilinx_emaclite: fix freezes due to unordered I/OAnssi Hannula1-54/+62
The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix receive buffer overflowAnssi Hannula1-3/+7
xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-23net: xilinx: constify net_device_ops structureBhumika Goyal1-2/+2
Declare net_device_ops structure as const as it is only stored in the netdev_ops field of a net_device structure. This field is of type const, so net_device_ops structures having same properties can be made const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p={...}; @ok1@ identifier r1.i; position p; struct net_device ndev; @@ ndev.netdev_ops=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct net_device_ops i; File size before: text data bss dec hex filename 6201 744 0 6945 1b21 ethernet/xilinx/xilinx_emaclite.o File size after: text data bss dec hex filename 6745 192 0 6937 1b19 ethernet/xilinx/xilinx_emaclite.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05net: xilinx: emaclite: Remove xemaclite_remove_ndev()Tobias Klauser1-16/+2
xemaclite_remove_ndev() is a simple wrapper around free_netdev() checking for NULL before the call. All possible paths calling it are guaranteed to pass a non-NULL argument, so rather call free_netdev() directly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: ll_temac: Utilize of_get_mac_address()Tobias Klauser1-5/+6
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making temac_init_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: axienet: Utilize of_get_mac_address()Tobias Klauser1-6/+7
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making axienet_set_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: ll_temac: Utilize phy_ethtool_nway_resetFlorian Fainelli1-6/+1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson1-3/+4
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: axienet: Remove unused parameter from __axienet_device_resetTobias Klauser1-6/+5
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06net: axienet: Add missing \n to end of dev_err messagesColin Ian King1-2/+2
Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net: ethernet: xilinx: Enable emaclite for MIPSZubair Lutfullah Kakakhel1-2/+2
The MIPS based xilfpga platform uses this driver. Enable it for MIPS Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: axienet: constify ethtool_ops structuresJulia Lawall1-1/+1
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20net: xilinx: emaclite: Fallback to random MAC address.Daniel Romell1-3/+5
If the address configured in the device tree is invalid, the driver will fallback to using a random address from the locally administered range. Signed-off-by: Daniel Romell <daro@hms.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: axienet: Fix return value check in axienet_probe()Wei Yongjun1-2/+2
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 46aa27df8853 ('net: axienet: Use devm_* calls') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-45/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phydev from struct net_devicePhilippe Reynes2-21/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phydev from struct net_devicePhilippe Reynes2-22/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal3-4/+4
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-1/+1
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn5-11/+0
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-1/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: fix phy refcounting in a bunch of driversRussell King1-0/+2
of_phy_find_device() increments the phy struct device refcount, which we need to properly balance. Add code to network drivers using this function to ensure that the struct device refcount is correctly balanced. For xgene, looking back in the history, we should be able to use of_phy_connect() with a zero flags argument for the DT case as this is how the driver used to operate prior to de7b5b3d790a ("net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPI"). This leaves the Cavium Thunder BGX unfixed; fixing this driver is a complicated task, one which the maintainers need to be involved with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: axinet: Use of_property_read_u32 instead of open-coding itTobias Klauser1-4/+1
Use of_property_read_u32 instead of of_get_property with return value checks and endianness conversion. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: ll_temac: Use of_property_read_u32 instead of open-coding itTobias Klauser1-5/+4
Use of_property_read_u32 to read the "clock-frequency" property instead of using of_get_property with return value checks. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09net: axienet: Fix devm_ioremap_resource return value checkKrzysztof Kozlowski1-4/+4
Value returned by devm_ioremap_resource() was checked for non-NULL but devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of error this could lead to dereference of ERR_PTR. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 46aa27df8853 ("net: axienet: Use devm_* calls") Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker1-3/+1
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07net: ll_temac: Remove sparse warningsMichal Simek1-6/+6
Remove sparse warnings: drivers/net/ethernet/xilinx/ll_temac_main.c:65:16: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:70:9: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:127:16: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:137:9: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:409:3: warning: symbol 'temac_options' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:590:6: warning: symbol 'temac_adjust_link' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12net: ll_temac: Fix DMA map size bugMichal Simek1-2/+2
DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: ll_temac: Use one return statement instead of twoMichal Simek1-3/+1
Use one return statement instead of two to simplify the code. Both are returning the same value. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Fix kernel-doc warningsMichal Simek3-18/+32
This patch remove kernel-doc warnings. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Removed _of_ prefix in probe and remove functionsSrikanth Thokala1-7/+7
Synchronize names with other drivers. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Use of_property_* callsSrikanth Thokala1-20/+15
Use of_property_* calls Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Use devm_* callsSrikanth Thokala1-27/+27
use devm_* calls Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Use pdev instead of opSrikanth Thokala1-23/+24
Synchronize names with other drivers Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Fix comments blocksMichal Simek3-59/+71
There is rule for network drivers with comments blocks which is newly checked by checkpatch.pl script. Let's fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Removed coding style errors and warningsSrikanth Thokala2-20/+21
Removed checkpatch.pl errors and warnings. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Support phy-less mode of operationSrikanth Thokala1-5/+5
This patch adds proper checks to handle the PHY-less case. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Handle jumbo frames for lesser frame sizesSrikanth Thokala2-28/+27
In the current implementation, jumbo frames are supported only for the frame sizes > 16K. This patch corrects this logic to handle jumbo frames for lesser frame sizes (< 16K) ensuring jumbo frame MTU is within the limit of max frame size configured in the h/w design. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Service completion interrupts ASAPPeter Crosthwaite1-2/+4
The packet completion interrupts for TX and RX should be serviced before the packets are consumed. This ensures against the degenerate case when a new completion interrupt is raised after the handler has exited but before the interrupts are cleared. In this case its possible for the ISR to clear an unhandled interrupt (leading to potential deadlock). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Jason Wu <huanyu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Handle 0 packet receive gracefullyPeter Crosthwaite1-3/+4
The AXI-DMA rx-delay interrupt can sometimes be triggered when there are 0 outstanding packets received. This is due to the fact that the receive function will greedily consume as many packets as possible on interrupt. So if two packets (with a very particular timing) arrive in succession they will each cause the rx-delay interrupt, but the first interrupt will consume both packets. This means the second interrupt is a 0 packet receive. This is mostly OK, except that the tail pointer register is updated unconditionally on receive. Currently the tail pointer is always set to the current bd-ring descriptor under the assumption that the hardware has moved onto the next descriptor. What this means for length 0 recv is the current descriptor that the hardware is potentially yet to use will be marked as the tail. This causes the hardware to think its run out of descriptors deadlocking the whole rx path. Fixed by updating the tail pointer to the most recent successfully consumed descriptor. Reported-by: Wendy Liang <wendy.liang@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Jason Wu <huanyu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05net: axienet: Support for RGMIISrikanth Thokala1-1/+8
This patch adds support for the RGMII. The h/w configuration parameter C_PHY_TYPE, which represents the interface configured in the design, is used to differentiate various interfaces supported by AXI Ethernet. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ethernet: Use bool function returns of true/false instead of 1/0Joe Perches1-1/+1
Use bool constants as the return values instead of 1 and 0. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: xilinx: constify of_device_id arrayFabian Frederick3-3/+3
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 21:21:54 +0000