summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti/cpsw.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-27net: ethernet: ti: cpsw: refactor probe to group common hw initializationGrygorii Strashko1-116/+97
Rework probe to group common hw initialization: - group resources request at the beginning of the probe - move net device initialization and registration at the end of the probe - drop cpsw_slave_init as preparation of refactoring of common hw initialization code to separate function. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac modeGrygorii Strashko1-3/+9
Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is working in non dual_mac mode, but in dual_mac - it causes enabling/disabling ALLMULTI flag for both ports. Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to specify ALE port number for which ALLMULTI has to be enabled and check if port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit()Grygorii Strashko1-12/+3
Drop unnecessary wrapper function cpsw_tx_packet_submit() which is used only in one place. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs()Grygorii Strashko1-12/+6
Use devm_alloc_etherdev_mqs() and simplify code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state callGrygorii Strashko1-3/+0
Drop pinctrl_pm_select_default_state call from probe as default pinctrl state is set by DD core. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: use local var dev in probeGrygorii Strashko1-32/+33
Use local variable struct device *dev in probe to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_commonGrygorii Strashko1-8/+6
Update cpsw_split_res() to accept struct cpsw_common instead of struct net_device to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: convert to SPDX license identifiersGrygorii Strashko1-8/+1
Replace textual license with SPDX-License-Identifier. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28Merge tag 'usb-4.21-rc1' of ↵Linus Torvalds1-1/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...
2018-12-12net: ethernet: ti: cpsw: add support for port interface mode selection phyGrygorii Strashko1-1/+18
Add support for port interface mode selection phy (phy-gmii-sel): - try to request interface mode selection phy from Port DT node and fail silently if not defined and old CONFIG_TI_CPSW_PHY_SEL driver enabled. - use new phy if requested successfully. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-05net: Use of_node_name_eq for node name comparisonsRob Herring1-2/+2
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: "David S. Miller" <davem@davemloft.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: netdev@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13net: ethernet: ti: cpsw: allow vlan tagged packets to be timestampedIvan Khoronzhuk1-2/+3
Allow vlan tagged packets to be timestamped, as no any restrictions for this. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13net: ethernet: ti: cpts: move enable/disable flags outside of cpts moduleIvan Khoronzhuk1-22/+24
Each slave has it's own receive timestamp filter. But cpts rx/tx timestamp enable flags are used to allow ts retrieve only for one user. This limitation causes data path redundancy and setting overlap if cpsw module is in dual-mac mode for instance. If rx ts is enabled only for one port - the second interface must expect every incoming packet to be PTP packet w/o absolutely any reason, and if it's PTP - do unneeded stuff, as rx filter for second port is not set and cpts fifo is not supposed to contain appropriate ts event. That's not correct. So, to fix control overlap and avoid redundant CPU cycles, the patch splits rx/tx ts enable flags between network devices. After the patch, PTP timestamping still should be used for only one port (or PTP id counter has to be different for both ports as cpts IP is common). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: ethernet: ti: cpsw: fix vlan configuration while down/upIvan Khoronzhuk1-0/+17
The vlan configuration is not restored after interface donw/up sequence (if dual-emac - both interfaces). Tested on am572x EVM. Steps to check: ~# ip link add link eth1 name eth1.100 type vlan id 100 ~# ifconfig eth0 down ~# ifconfig eth1 down Try to remove vid and observe warning: ~# ip link del eth1.100 [ 739.526757] net eth1: removing vlanid 100 from vlan filter [ 739.533322] failed to kill vid 0081/100 for device eth1 This patch fixes it, restoring only vlan ALE entries and all other unicast/multicast entries are restored by system calling rx_mode ndo. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: ethernet: ti: cpsw: fix vlan mcastIvan Khoronzhuk1-31/+138
At this moment, mcast addresses are added for real device only (reserved vlans for dual-emac mode), even if a mcast address was added for some vlan only, thus ALE doesn't have corresponding vlan mcast entries after vlan socket joined multicast group. So ALE drops vlan frames with mcast addresses intended for vlans and potentially can receive mcast frames for base ndev. That's not correct. So, fix it by creating only vlan/mcast entries as requested. Patch doesn't use any additional lists and is based on device mc address list and cpsw ALE table entries. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: ti: cpsw: unsync mcast entries while switch promisc modeIvan Khoronzhuk1-0/+1
After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da1948969bc ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-21net: ethernet: ti: cpsw: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15net: ethernet: ti: cpsw: use for mcast entries only host portIvan Khoronzhuk1-6/+7
In dual-emac mode the cpsw driver sends directed packets, that means that packets go to the directed port, but an ALE lookup is performed to determine untagged egress only. It means that on tx side no need to add port bit for ALE mcast entry mask, and basically ALE entry for port identification is needed only on rx side. So, add only host port in dual_emac mode as used directed transmission, and no need in one more port. For single port boards and switch mode all ports used, as usual, so no changes for them. Also it simplifies farther changes. In other words, mcast entries for dual-emac should behave exactly like unicast. It also can help avoid leaking packets between ports with same vlan on h/w level if ports could became members of same vid. So now, for instance, if mcast address 33:33:00:00:00:01 is added then entries in ALE table: vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1 vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1 Instead of: vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x3 vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x5 With the same considerations, set only host port for unregistered mcast for dual-emac mode in case of IFF_ALLMULTI is set, exactly like it's done in cpsw_ale_set_allmulti(). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode updateIvan Khoronzhuk1-18/+28
Whenever kernel or user decides to call rx mode update, it clears every multicast entry from forwarding table and in some time adds it again. This time can be enough to drop incoming multicast packets. That's why clear only staled multicast entries and update or add new one afterwards. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ti: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-3/+3
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+11
2018-08-11net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlanIvan Khoronzhuk1-4/+7
It's exclusive with normal behaviour but if try to set vlan to one of the reserved values is made, the cpsw runtime pm is broken. Fixes: a6c5d14f5136 ("drivers: net: cpsw: ndev: fix accessing to suspended device") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: ethernet: ti: cpsw: clear all entries when delete vidIvan Khoronzhuk1-10/+4
In cases if some of the entries were not found in forwarding table while killing vlan, the rest not needed entries still left in the table. No need to stop, as entry was deleted anyway. So fix this by returning error only after all was cleaned. To implement this, return -ENOENT in cpsw_ale_del_mcast() as it's supposed to be. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01net: ethernet: ti: cpsw: replace unnecessarily macroses on functionsIvan Khoronzhuk1-32/+26
Replace ugly macroses on functions. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: ethernet: ti: cpsw: add missed RX_CTAG feature for second slaveIvan Khoronzhuk1-1/+1
Seems it was missed while adding for first net dev in dual-emac mode. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: restore shaper configuration while down/upIvan Khoronzhuk1-0/+47
Need to restore shapers configuration after interface was down/up. This is needed as appropriate configuration is still replicated in kernel settings. This only shapers context restore, so vlan configuration should be restored by user if needed, especially for devices with one port where vlan frames are sent via ALE. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: add CBS Qdisc offloadIvan Khoronzhuk1-0/+221
The cpsw has up to 4 FIFOs per port and upper 3 FIFOs can feed rate limited queue with shaping. In order to set and enable shaping for those 3 FIFOs queues the network device with CBS qdisc attached is needed. The CBS configuration is added for dual-emac/single port mode only, but potentially can be used in switch mode also, based on switchdev for instance. Despite the FIFO shapers can work w/o cpdma level shapers the base usage must be in combine with cpdma level shapers as described in TRM, that are set as maximum rates for interface queues with sysfs. One of the possible configuration with txq shapers and CBS shapers: Configured with echo RATE > /sys/class/net/eth0/queues/tx-0/tx_maxrate /--------------------------------------------------- / / cpdma level shapers +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ | c7 | | c6 | | c5 | | c4 | | c3 | | c2 | | c1 | | c0 | \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \/ \/ \/ \/ \/ \/ \/ \/ +---------|------|------|------|-------------------------------------+ | +----+ | | +---+ | | | +----+ | | | | v v v v | | +----+ +----+ +----+ +----+ p p+----+ +----+ +----+ +----+ | | | | | | | | | | o o| | | | | | | | | | | f3 | | f2 | | f1 | | f0 | r CPSW r| f3 | | f2 | | f1 | | f0 | | | | | | | | | | | t t| | | | | | | | | | \ / \ / \ / \ / 0 1\ / \ / \ / \ / | | \ X \ / \ / \ / \ / \ / \ / \ / | | \/ \ \/ \/ \/ \/ \/ \/ \/ | +-------\------------------------------------------------------------+ \ \ FIFO shaper, set with CBS offload added in this patch, \ FIFO0 cannot be rate limited ------------------------------------------------------ CBS shaper configuration is supposed to be used with root MQPRIO Qdisc offload allowing to add sk_prio->tc->txq maps that direct traffic to appropriate tx queue and maps L2 priority to FIFO shaper. The CBS shaper is intended to be used for AVB where L2 priority (pcp field) is used to differentiate class of traffic. So additionally vlan needs to be created with appropriate egress sk_prio->l2 prio map. If CBS has several tx queues assigned to it, the sum of their bandwidth has not overlap bandwidth set for CBS. It's recomended the CBS bandwidth to be a little bit more. The CBS shaper is configured with CBS qdisc offload interface using tc tool from iproute2 packet. For instance: $ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio |    +---(100:3) mqprio |    +---(100:4) mqprio |     +---(100:ffe1) mqprio |    +---(100:2) mqprio |     +---(100:ffe0) mqprio     +---(100:1) mqprio $ tc qdisc add dev eth0 parent 100:1 cbs locredit -1440 \ hicredit 60 sendslope -960000 idleslope 40000 offload 1 $ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \ hicredit 62 sendslope -980000 idleslope 20000 offload 1 The above code set CBS shapers for tc0 and tc1, for that txq0 and txq1 is used. Pay attention, the real set bandwidth can differ a bit due to discreteness of configuration parameters. Here parameters like locredit, hicredit and sendslope are ignored internally and are supposed to be set with assumption that maximum frame size for frame - 1500. It's supposed that interface speed is not changed while reconnection, not always is true, so inform user in case speed of interface was changed, as it can impact on dependent shapers configuration. For more examples see Documentation. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: add MQPRIO Qdisc offloadIvan Khoronzhuk1-0/+82
That's possible to offload vlan to tc priority mapping with assumption sk_prio == L2 prio. Example: $ ethtool -L eth0 rx 1 tx 4 $ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio |    +---(100:3) mqprio |    +---(100:4) mqprio |     +---(100:ffe1) mqprio |    +---(100:2) mqprio |     +---(100:ffe0) mqprio     +---(100:1) mqprio Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3 txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2 The offload part only maps L2 prio to classes of traffic, but not to transmit queues, so to direct traffic to traffic class vlan has to be created with appropriate egress map. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: use cpdma channels in backward order for txqIvan Khoronzhuk1-6/+8
The cpdma channel highest priority is from hi to lo number. The driver has limited number of descriptors that are shared between number of cpdma channels. Number of queues can be tuned with ethtool, that allows to not spend descriptors on not needed cpdma channels. In AVB usually only 2 tx queues can be enough with rate limitation. The rate limitation can be used only for hi priority queues. Thus, to use only 2 queues the 8 has to be created. It's wasteful. So, in order to allow using only needed number of rate limited tx queues, save resources, and be able to set rate limitation for them, let assign tx cpdma channels in backward order to queues. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: ethernet: ti: cpsw: allow PTP 224.0.0.107 to be timestampedIvan Khoronzhuk1-1/+2
Tested on AM572x with cpsw v1.15 for PTP sync and delay_req messages. It doesn't work on cpsw v1.12, so added only for cpsw v > 1.15. Command for testing: ptp4l -P -4 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg where ptp.cfg: [global] tx_timestamp_timeout 20 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: ethernet: ti: cpsw: use BIT macroIvan Khoronzhuk1-17/+17
It's needed to avoid checkpatch warnings for farther changes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: drivers/net: Convert random_ether_addr to eth_random_addrJoe Perches1-1/+1
random_ether_addr is a #define for eth_random_addr which is generally preferred in kernel code by ~3:1 Convert the uses of random_ether_addr to enable removing the #define Miscellanea: o Convert &vfmac[0] to equivalent vfmac and avoid unnecessary line wrap Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-4/+5
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31net: ti: cpsw: include gpio/consumer.hArnd Bergmann1-1/+1
On platforms that don't always enable CONFIG_GPIOLIB, we run into a build failure: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe': drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration] mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); Since we cannot rely on this to be visible from gpio.h, we have to include gpio/consumer.h directly. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21net: ethernet: ti: cpsw: Fix cpsw_add_ch_strings() printk formatFlorian Fainelli1-2/+2
When building on a 64-bit host we will get the following warning: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_add_ch_strings': drivers/net/ethernet/ti/cpsw.c:1284:19: warning: format '%d' expects argument of type 'int', but argument 5 has type 'long unsigned int' [-Wformat=] "%s DMA chan %d: %s", rx_dir ? "Rx" : "Tx", ~^ %ld Fix this by using an %ld format and casting to long. Fixes: e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17net: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devicesIvan Khoronzhuk1-49/+60
The early versions of am33xx devices, related to ES1.0 SoC revision have errata limiting mq support. That's the same errata as commit 7da1160002f1 ("drivers: net: cpsw: add am335x errata workarround for interrutps") AM33xx Errata [1] Advisory 1.0.9 http://www.ti.com/lit/er/sprz360f/sprz360f.pdf After additional investigation were found that drivers w/a is propagated on all AM33xx SoCs and on DM814x. But the errata exists only for ES1.0 of AM33xx family, limiting mq support for revisions after ES1.0. So, disable mq support only for related SoCs and use separate polls for revisions allowing mq. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02net: ethernet: ti: cpsw: fix packet leaking in dual_mac modeGrygorii Strashko1-0/+2
In dual_mac mode packets arrived on one port should not be forwarded by switch hw to another port. Only Linux Host can forward packets between ports. The below test case (reported in [1]) shows that packet arrived on one port can be leaked to anoter (reproducible with dual port evms): - connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark - connect port 2 (eth1) to linux Host 1 with vlan 1 configured - ping <IPx> from Host 1 through vlan 1 interface. ARP packets will be seen on Host 0. Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port 1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for each vlan. By default, the ALE will find valid vlan record in its table when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all ports which are vlan 1 members (like Port. To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will drop ingress packets if Rx port is not VLAN member. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22net: ethernet: ti: cpsw: fix tx vlan priority mappingIvan Khoronzhuk1-1/+1
The CPDMA_TX_PRIORITY_MAP in real is vlan pcp field priority mapping register and basically replaces vlan pcp field for tagged packets. So, set it to be 1:1 mapping. Otherwise, it will cause unexpected change of egress vlan tagged packets, like prio 2 -> prio 5. Fixes: e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap1-0/+1
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17net: ethernet: ti: cpsw: enable vlan rx vlan offloadGrygorii Strashko1-3/+64
In VLAN_AWARE mode CPSW can insert VLAN header encapsulation word on Host port 0 egress (RX) before the packet data if RX_VLAN_ENCAP bit is set in CPSW_CONTROL register. VLAN header encapsulation word has following format: HDR_PKT_Priority bits 29-31 - Header Packet VLAN prio (Highest prio: 7) HDR_PKT_CFI bits 28 - Header Packet VLAN CFI bit. HDR_PKT_Vid bits 27-16 - Header Packet VLAN ID PKT_Type bits 8-9 - Packet Type. Indicates whether the packet is VLAN-tagged, priority-tagged, or non-tagged. 00: VLAN-tagged packet 01: Reserved 10: Priority-tagged packet 11: Non-tagged packet This feature can be used to implement TX VLAN offload in case of VLAN-tagged packets and to insert VLAN tag in case Non-tagged packet was received on port with PVID set. As per documentation, CPSW never modifies packet data on Host egress (RX) and as result, without this feature enabled, Host port will not be able to receive properly packets which entered switch non-tagged through external Port with PVID set (when non-tagged packet forwarded from external Port with PVID set to another external Port - packet will be VLAN tagged properly). Implementation details: - on RX driver will check CPDMA status bit RX_VLAN_ENCAP BIT(19) in CPPI descriptor to identify when VLAN header encapsulation word is present. - PKT_Type = 0x01 or 0x02 then ignore VLAN header encapsulation word and pass packet as is; - if HDR_PKT_Vid = 0 then ignore VLAN header encapsulation word and pass packet as is; - In dual mac mode traffic is separated between ports using default port vlans, which are not be visible to Host and so should not be reported. Hence, check for default port vlans in dual mac mode and ignore VLAN header encapsulation word; - otherwise fill SKB with VLAN info using __vlan_hwaccel_put_tag(); - PKT_Type = 0x00 (VLAN-tagged) then strip out VLAN header from SKB. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY ↵SZ Lin (林上智)1-1/+2
interface According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only available when PHY is configured in RGMII mode with 10Mbps speed. It will cause some networking issues without RGMII mode, such as carrier sense errors and low throughput. TI also mentioned this issue in their forum[4]. This patch adds the check mechanism for PHY interface with RGMII interface type, the in-band mode can only be set in RGMII mode with 10Mbps speed. References: [1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf [2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf [3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf [4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155 Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07net: ethernet: ti: cpsw: fix net watchdog timeoutGrygorii Strashko1-2/+14
It was discovered that simple program which indefinitely sends 200b UDP packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog timeout is triggered due to race between cpsw_ndo_start_xmit() and cpsw_tx_handler() [NAPI] cpsw_ndo_start_xmit() if (unlikely(!cpdma_check_free_tx_desc(txch))) { txq = netdev_get_tx_queue(ndev, q_idx); netif_tx_stop_queue(txq); ^^ as per [1] barier has to be used after set_bit() otherwise new value might not be visible to other cpus } cpsw_tx_handler() if (unlikely(netif_tx_queue_stopped(txq))) netif_tx_wake_queue(txq); and when it happens ndev TX queue became disabled forever while driver's HW TX queue is empty. Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue() calls and double check for free TX descriptors after stopping ndev TX queue - if there are free TX descriptors wake up ndev TX queue. [1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net: ethernet: ti: cpdma: correct error handling for chan createIvan Khoronzhuk1-3/+9
It's not correct to return NULL when that is actually an error and function returns errors in any other wrong case. In the same time, the cpsw driver and davinci emac doesn't check error case while creating channel and it can miss actual error. Also remove WARNs replacing them on dev_err msgs. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: ale: use devm_kzalloc in cpsw_ale_create()Grygorii Strashko1-10/+7
Use cpsw_ale_create in cpsw_ale_create(). This also makes cpsw_ale_destroy() function nop, so remove it. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: cpsw: fix ale port numbersGrygorii Strashko1-1/+2
TI OMAP/Sitara SoCs have fixed number of ALE ports 3, which includes Host port also. Hence, use fixed value instead of value calcualted from DT, which can be set by user and might not reflect actual HW configuration. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: cpsw: move mac_hi/lo defines in cpsw.hGrygorii Strashko1-4/+0
Move mac_hi/lo defines in common header cpsw.h and re-use them for netcp_ethss.c. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: cpsw: move platform data struct to .c fileGrygorii Strashko1-0/+21
CPSW platform data struct cpsw_platform_data and struct cpsw_slave_data are used only incide cpsw.c module, so move these definitions there. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: cpsw: use proper io apisGrygorii Strashko1-18/+18
Switch to use writel_relaxed/readl_relaxed() IO API instead of raw version as it is recommended. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: ethernet: ti: cpsw: drop unused var poll from cpsw_update_channels_resGrygorii Strashko1-3/+0
Drop unused variable "poll" from cpsw_update_channels_res(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:00:02 +0000