summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc
AgeCommit message (Collapse)AuthorFilesLines
2018-04-06Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtdLinus Torvalds2-20/+2
Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ...
2018-04-04sfc: remove ctpio_dmabuf_start from statsBert Kenward2-3/+0
The ctpio_dmabuf_start entry is not actually a stat and shouldn't be exposed to ethtool. Fixes: 2c0b6ee837db ("sfc: expose CTPIO stats on NICs that support them") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: fix flow type handling for RSS filtersEdward Cree1-5/+6
The FLOW_RSS flag was causing us to insert UDP filters when TCP was wanted. Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: protect list of RSS contexts under a mutexEdward Cree6-32/+89
Otherwise races are possible between ethtool ops and efx_ef10_rx_restore_rss_contexts(). Also, don't try to perform the restore on every reset, only after an MC reboot, otherwise we'll leak RSS contexts on the NIC. Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: return a better error if filter insertion collides with MC rebootEdward Cree1-0/+7
If some other operation gets the MCDI lock ahead of us and performs an MC reboot, then our attempt to insert the filter will fail with EINVAL, because the destination VI (spec->dmaq_id, MC_CMD_FILTER_OP_IN_RX_QUEUE) does not exist. But the caller's request (which might e.g. be an ethtool ntuple request from userland) isn't invalid, it just got unlucky; so return EAGAIN. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: use a semaphore to lock farch filters tooEdward Cree2-36/+33
With this change, the spinlock efx->filter_lock is no longer used and is thus removed. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: give ef10 its own rwsem in the filter table instead of filter_lockEdward Cree3-213/+151
efx->filter_lock remains in place for use on farch, but EF10 now ignores it. EFX_EF10_FILTER_FLAG_BUSY is no longer needed, hence it is removed. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: replace asynchronous filter operationsEdward Cree8-208/+124
Instead of having an efx->type->filter_rfs_insert() method, just use workitems with a worker function that calls efx->type->filter_insert(). The only user of this is efx_filter_rfs(), which now queues a call to efx_filter_rfs_work(). Similarly, efx_filter_rfs_expire() is now a worker function called on a new channel->filter_work work_struct, so the method efx->type->filter_rfs_expire_one() is no longer called in atomic context. We also add a new mutex efx->rps_mutex to protect the RPS state (efx-> rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so that the taking of efx->filter_lock can be moved to efx->type->filter_rfs_expire_one(). Thus, all filter table functions are now called in a sleepable context, allowing them to use sleeping locks in a future patch. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches1-1/+1
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon2-20/+2
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-14sfc: support FEC configuration through ethtoolEdward Cree3-0/+190
As well as 'auto' and the forced 'off', 'rs' and 'baser' states, we also handle combinations of settings (since the fecparam->fec field is a bitmask), where auto|rs and auto|baser specify a preferred FEC mode but will fall back to the other if the cable or link partner doesn't support it. rs|baser (with or without auto bit) means prefer FEC even where auto wouldn't use it, but let FW choose which encoding to use. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14sfc: update MCDI protocol headersEdward Cree1-1046/+1776
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08sfc: support RSS spreading of ethtool ntuple filtersEdward Cree9-150/+443
Use a linked list to associate user-facing context IDs with FW-facing context IDs (since the latter can change after an MC reset). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26sfc: falcon: remove duplicated bit-wise or of LOOPBACK_SGMIIColin Ian King1-1/+0
Bit pattern LOOPBACK_SGMII is being bit-wise or'd twice; remove the redundant 2nd LOOPBACK_SGMII Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-28sfc: mark some unexported symbols as statickbuild test robot2-3/+3
efx_default_channel_want_txqs() is only used in efx.c, while efx_ptp_want_txqs() and efx_ptp_channel_type (a struct) are only used in ptp.c. In all cases these symbols should be static. Fixes: 2935e3c38228 ("sfc: on 8000 series use TX queues for TX timestamps") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> [ecree@solarflare.com: rewrote commit message] Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26sfc: add suffix to large constant in ptpBert Kenward1-1/+1
Fixes: 1280c0f8aafc ("sfc: support second + quarter ns time format for receive datapath") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support Medford2 frequency adjustment formatLaurence Evans1-14/+31
Support increased precision frequency adjustment format (FP44) used by Medford2 adapters. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support second + quarter ns time format for receive datapathEdward Cree1-33/+106
The time_format that we stash in the PTP data structure is never referenced, so we can remove it. Instead, store the information needed to interpret sync event timestamps. Also rolls in a couple of other related minor PTP fixes. Based on patches by Bert Kenward <bkenward@solarflare.com> and Laurence Evans <levans@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support separate PTP and general timestampingLaurence Evans1-15/+43
Support MC_CMD_PTP_OUT_GET_TIMESTAMP_CORRECTIONS_V2. Extract general timestamp corrections in addition to PTP corrections. Apply receive timestamp corrections for general datapath receive timestamping, and correspondingly for transmit. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: simplify RX datapath timestampingLaurence Evans1-8/+5
Use timestamp conversion function with correction to avoid duplicate correction handling. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: only advertise TX timestamping if we have the license for itMartin Habets2-1/+16
We check the license for TX hardware timestamping capability. The PTP probe will have enabled PTP sync events from the adapter. If later, at TX queue init, it turns out we do not have the license, we don't need the sync events either. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: on 8000 series use TX queues for TX timestampsEdward Cree6-13/+54
For this we create and use one or more new TX queues on the PTP channel, and enable sync events for it. Based on a patch by Martin Habets <mhabets@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: MAC TX timestamp handling on the 8000 seriesMartin Habets2-2/+46
TX timestamps on 8000 series are supplied from the MAC. This timestamp is only 48 bits long. The high order bits from the last time sync event are used for the top 16 bits. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: only enable TX timestamping if the adapter is licensed for itMartin Habets2-0/+29
If we try to enable the feature and do not have the license for it, the MCPU will refuse and fail our TX queue init. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: use main datapath for HW timestamps if availableMartin Habets2-15/+42
We can now transmit SKBs in 2 ways: 1. Via the MC (for the 7XXX series and earlier), using efx_ptp_xmit_skb_mc(). 2. Via the TX queues on the dedicated PTP channel (8XXX series and later), using efx_ptp_xmit_skb_queue(). The PTP worker thread uses the method set up at probe time. It never checked the return code from the old efx_ptp_xmit_skb(), so it now returns void. We increment the TX dropped counter of the device if the transmit fails. As a result of the probe per channel the remove gets called multiple times. Clean up efx->ptp_data properly to avoid the 2nd call blowing up. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: add function to determine which TX timestamping method to useMartin Habets2-0/+11
Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to detect whether the NIC supports timestamping packets sent out the main datapath. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: handle TX timestamps in the normal data pathMartin Habets5-9/+119
Before this work, TX timestamping is done by sending each SKB to the MC. On the 8000 series (Medford1) we have high speed timestamping via the MAC, which means we can use normal TX queues for this without a significant drop in bandwidth. On the X2000 series (Medford2) support for transmitting via the MC is removed, so the new way must be used. This patch enables timestamping on a TX queue, if requested. It also enhances TX event handling to process the extra completion events, and puts the time in the SKB. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: remove tx and MCDI handling from NAPI budget considerationBert Kenward2-30/+7
The NAPI budget is only for RX processing work, not other work such as TX or MCDI completion handling. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: add bits for 25/50/100G supported/advertised speedsEdward Cree1-0/+12
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: support the ethtool ksettings API properly so that 25/50/100G worksEdward Cree5-83/+92
Store and handle ethtool link mode masks within the driver instead of just a single u32. However, quite a significant amount of existing code wants to manipulate the masks directly, and thus now uses the first unsigned long (i.e. mask[0]) as though it were a legacy u32 mask. This is ok because all the bits that code is interested in are in the first 32 bits of the mask; but it might be a good idea to change them in future to use the proper bitmap API. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: basic MCDI mapping of 25/50/100G link speedsEdward Cree1-10/+16
Only handles direct speed setting, not autoneg, because the driver is still trying to pretend it uses the legacy ethtool API which doesn't have advertised/supported bits for 25/50/100G. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: expose CTPIO stats on NICs that support themBert Kenward2-0/+67
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'), other drivers on the same port might, so if we're responsible for reporting per-port stats we need to include the CTPIO stats. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: expose FEC stats on Medford2Edward Cree2-1/+30
There's no explicit capability bit, so we just condition them on having efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: support variable number of MAC statsEdward Cree5-11/+29
Medford2 NICs support more than MC_CMD_MAC_NSTATS stats, and report the new count in a field of MC_CMD_GET_CAPABILITIES_V4. This also means that the end generation count moves (it is, as before, the last 64 bits of the DMA buffer, but that is no longer MC_CMD_MAC_GENERATION_END). So read num_mac_stats from the GET_CAPABILITIES response, if present; otherwise assume MC_CMD_MAC_NSTATS; and always use num_mac_stats - 1 rather than MC_CMD_MAC_GENERATION_END. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: update MCDI protocol headersEdward Cree1-144/+2309
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: populate the timer reload fieldBert Kenward1-2/+3
The timer mode register now has a separate field for the reload value. Since we always use this timer with the reload (for interrupt moderation) we set this to the same as the initial value. Previous hardware ignores this field, so we can safely set these bits on all hardware that uses this register. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: update EF10 register definitionsBert Kenward2-25/+37
The RX_L4_CLASS field has shrunk from 3 bits to 2 bits. The upper bit was never used in previous hardware, so we can use the new definition throughout. The TSO OUTER_IPID field was previously spelt differently from the external definitions. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: improve PTP error reportingEdward Cree3-2/+13
Log a message if PTP probing fails; if we then, unexpectedly, get PTP events, only log a message for the first one on each device. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: add Medford2 (SFC9250) PCI Device IDsEdward Cree1-0/+4
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: support VI strides other than 8kEdward Cree5-27/+70
Medford2 can also have 16k or 64k VI stride. This is reported by MCDI in GET_CAPABILITIES, which fortunately is called before the driver does anything sensitive to the VI stride (such as accessing or even allocating VIs past the zeroth). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: make mem_bar a function rather than a constantEdward Cree5-12/+35
Support using BAR 0 on SFC9250, even though the driver doesn't bind to such devices yet. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08sfc: pass valid pointers from efx_enqueue_unwindBert Kenward1-1/+4
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers cannot be NULL. Add a paranoid warning to check this condition and fix the one case where they were NULL. efx_enqueue_unwind() is called very rarely, during error handling. Without this fix it would fail with a NULL pointer dereference in efx_dequeue_buffer, with efx_enqueue_skb in the call stack. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Tested-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+2
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15mm: remove __GFP_COLDMel Gorman2-2/+2
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds15-37/+55
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-11net: sfc: remove redundant variable startColin Ian King1-2/+0
Variable start is assigned but never read hence it is redundant and can be removed. Cleans up clang warning: drivers/net/ethernet/sfc/ptp.c:655:2: warning: Value stored to 'start' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10sfc: don't warn on successful change of MACRobert Stonehouse1-1/+1
Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net_sch: mqprio: Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIONogah Frankel2-2/+2
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new convention. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar2-0/+2
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+2
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 10:55:24 +0000