summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/renesas/sh_eth.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-06net: renesas: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16sh_eth: use Gigabit register map for R7S72100Sergei Shtylyov1-67/+1
The register maps for the Gigabit controllers and the Ether one used on RZ/A1 (AKA R7S72100) are identical except for GECMR which is only present on the true GEther controllers. We no longer use the register map arrays to determine if a given register exists, and have added the GECMR flag to the 'struct sh_eth_cpu_data' in the previous patch, so we're ready to drop the R7S72100 specific register map -- this saves 216 bytes of object code (ARM gcc 4.8.5). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16sh_eth: add sh_eth_cpu_data::gecmr flagSergei Shtylyov1-1/+13
Not all Ether controllers having the Gigabit register layout have GECMR -- RZ/A1 (AKA R7S72100) actually has the same layout but no Gigabit speed support and hence no GECMR. In the past, the new register map table was added for this SoC, now I think we should have used the existing Gigabit table with the differences (such as GECMR) covered by the mere flags in the 'struct sh_eth_cpu_data'. Add such flag for GECMR -- and then we can get rid of the R7S72100 specific layout in the next patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16sh_eth: check sh_eth_cpu_data::no_xdfar when dumping registersSergei Shtylyov1-2/+4
When adding the sh_eth_cpu_data::no_xdfar flag I forgot to add the flag check to __sh_eth_get_regs(), causing the non-existing RDFAR/TDFAR to be considered for dumping on the R-Car gen1/2 SoCs (the register offset check has the final say here)... Fixes: 4c1d45850d5 ("sh_eth: add sh_eth_cpu_data::cexcr flag") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16sh_eth: check sh_eth_cpu_data::cexcr when dumping registersSergei Shtylyov1-2/+4
When adding the sh_eth_cpu_data::cexcr flag I forgot to add the flag check to __sh_eth_get_regs(), causing the non-existing RX packet counter registers to be considered for dumping on the R7S72100 SoC (the register offset sanity check has the final say here)... Fixes: 4c1d45850d5 ("sh_eth: add sh_eth_cpu_data::cexcr flag") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16sh_eth: check sh_eth_cpu_data::no_tx_cntrs when dumping registersSergei Shtylyov1-4/+6
When adding the sh_eth_cpu_data::no_tx_cntrs flag I forgot to add the flag check to __sh_eth_get_regs(), causing the non-existing TX counter registers to be considered for dumping on the R7S72100 SoC (the register offset sanity check has the final say here)... Fixes: ce9134dff6d9 ("sh_eth: add sh_eth_cpu_data::no_tx_cntrs flag") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit1-16/+2
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-17/+21
2020-01-09sh_eth: check sh_eth_cpu_data::dual_port when dumping registersSergei Shtylyov1-17/+21
When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag checks to __sh_eth_get_regs(), causing the non-existing TSU registers to be dumped by 'ethtool' on the single port Ether controllers having TSU... Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn1-3/+4
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCsYoshihiro Shimoda1-0/+4
The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below: ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs. Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-10net: ethernet: fix similar warning reported by kbuild test robotPetr Štetiar1-1/+1
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: a51645f70f63 ("net: ethernet: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-1/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-12net: sh_eth: fix a missing check of of_get_phy_modeKangjie Lu1-1/+5
of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails. Fixes: b356e978e92f ("sh_eth: add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on SH7763Sergei Shtylyov1-0/+1
The SH7763 SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MACs... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on SH7734Sergei Shtylyov1-0/+1
The SH7734 SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MACs... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on R8A77980Sergei Shtylyov1-0/+1
The R-Car V3H (R8A77980) SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MAC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on R8A7740Sergei Shtylyov1-0/+1
The R-Mobile A1 (R8A7740) SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MAC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on R7S72100Sergei Shtylyov1-0/+1
The RZ/A1H (R7S721000) SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MACs... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: RX checksum offload supportSergei Shtylyov1-2/+58
Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: rename sh_eth_cpu_data::hw_checksumSergei Shtylyov1-7/+7
Commit 62e04b7e0e3c ("sh_eth: rename 'sh_eth_cpu_data::hw_crc'") renamed the field to 'hw_checksum' for the Ether DMAC "intelligent checksum", however some Ether MACs implement a simpler checksumming scheme, so that name now seems misleading. Rename that field to 'csmr' as the "intelligent checksum" is always controlled by the CSMR register. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29sh_eth: Add R7S9210 supportChris Brandt1-0/+36
Add support for the R7S9210 which is part of the RZ/A2 series. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: ethernet: renesas: use SPDX identifier for Renesas driversWolfram Sang1-12/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23sh_eth: make sh_eth_tsu_{read|write}_entry() prototypes symmetricSergei Shtylyov1-5/+6
sh_eth_tsu_read_entry() is still asymmetric with sh_eth_tsu_write_entry() WRT their prototypes -- make them symmetric by passing to the former a TSU register offset instead of its address and also adding the (now necessary) 'ndev' parameter... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23sh_eth: make sh_eth_tsu_write_entry() take 'offset' parameterSergei Shtylyov1-9/+6
We can add the TSU register base address to a TSU register offset right in sh_eth_tsu_write_entry(), no need to do it in its callers... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23sh_eth: call sh_eth_tsu_get_offset() from TSU register accessorsSergei Shtylyov1-2/+2
With sh_eth_tsu_get_offset() now actually returning TSU register's offset, we can at last use it in sh_eth_tsu_{read|write}(). Somehow this saves 248 bytes of object code with AArch64 gcc 4.8.5... :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23sh_eth: make sh_eth_tsu_get_offset() match its nameSergei Shtylyov1-10/+14
sh_eth_tsu_get_offset(), despite its name, returns a TSU register's address, not its offset. Make this function match its name and return a register's offset from the TSU registers base address instead. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23sh_eth: uninline sh_eth_tsu_get_offset()Sergei Shtylyov1-0/+5
sh_eth_tsu_get_offset() is called several times by the driver, remove *inline* and move that function from the header to the driver itself to let gcc decide whether to expand it inline or not... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller1-77/+17
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .set_link_ksettings from ethtool opsVladimir Zapolskiy1-10/+1
The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house sh_eth_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .get_link_ksettings from ethtool opsVladimir Zapolskiy1-12/+1
The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house sh_eth_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove useless serialization in sh_eth_get_link_ksettings()Vladimir Zapolskiy1-5/+0
phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .nway_reset from ethtool opsVladimir Zapolskiy1-9/+1
The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house sh_eth_nway_reset(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: simplify link auto-negotiation by ethtoolVladimir Zapolskiy1-1/+1
There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from sh_eth_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: fix invalid context bug while changing link options by ethtoolVladimir Zapolskiy1-34/+15
The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812bbe10 ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: fix invalid context bug while calling auto-negotiation by ethtoolVladimir Zapolskiy1-9/+1
Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28sh_eth: fix *enum* {A|M}PR_BITSergei Shtylyov1-2/+2
The *enum* {A|M}PR_BIT were declared in the commit 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") adding SH771x support, however the SH771x manual doesn't have the APR/MPR registers described and the code writing to them for SH7710 was later removed by the commit 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data""). All the newer SoC manuals have these registers documented as having a 16-bit TIME parameter of the PAUSE frame, not 1-bit -- update the *enum* accordingly, fixing up the APR/MPR writes... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26sh_eth: remove sh_eth_cpu_data::rpadir_valueSergei Shtylyov1-7/+1
If RPADIR exists, the value written to it is always the same for all SoCs (and derived from NET_IP_ALIGN), so there has not been any need to store it in the *struct* sh_eth_cpu_data... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04sh_eth: use DIV_ROUND_UP() in sh_eth_soft_swap()Sergei Shtylyov1-1/+1
When initializing 'maxp' in sh_eth_soft_swap(), the buffer length needs to be rounded up -- that's just asking for DIV_ROUND_UP()! Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04sh_eth: uninline sh_eth_soft_swap()Sergei Shtylyov1-0/+11
sh_eth_tsu_soft_swap() is called twice by the driver, remove *inline* and move that function from the header to the driver itself to let gcc decide whether to expand it inline or not... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix typo in comment to BCULR writeSergei Shtylyov1-1/+2
Simon has noticed a typo in the comment accompaining the BCULR write -- fix it and move the comment before the write (following the style of the other comments), while at it... Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix typo in EESR.TRO bit nameSergei Shtylyov1-5/+5
The correct name of the EESR bit 8 is TRO (transmit retry over), not RTO. Note that EESIPR bit 8, TROIP remained correct... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add R8A77980 supportSergei Shtylyov1-0/+44
Finally, add support for the DT probing of the R-Car V3H (AKA R8A77980) -- it's the only R-Car gen3 SoC having the GEther controller -- others have only EtherAVB... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add EDMR.NBST supportSergei Shtylyov1-0/+4
The R-Car V3H (AKA R8A77980) GEther controller adds the DMA burst mode bit (NBST) in EDMR and the manual tells to always set it before doing any DMA. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add RGMII supportSergei Shtylyov1-0/+3
The R-Car V3H (AKA R8A77980) GEther controller adds support for the RGMII PHY interface mode as a new value for the RMII_MII register. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16drivers: net: Remove device_node checks with of_mdiobus_register()Florian Fainelli1-8/+3
A number of drivers have the following pattern: if (np) of_mdiobus_register() else mdiobus_register() which the implementation of of_mdiobus_register() now takes care of. Remove that pattern in drivers that strictly adhere to it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04sh_eth: WARN_ON() access to unimplemented TSU registerSergei Shtylyov1-2/+12
Commit 3365711df024 ("sh_eth: WARN on access to a register not implemented in a particular chip") added WARN_ON() to sh_eth_{read|write}() but not to sh_eth_tsu_{read|write}(). Now that we've routed almost all TSU register accesses (except TSU_ADR{H|L}<n> -- which are special) thru the latter pair of accessors, it makes sense to check for the unimplemented TSU registers as well... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 01:05:31 +0000