summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qualcomm/emac
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07net: qcom/emac: Demote MTU change print to debugFlorian Fainelli1-3/+3
Changing the MTU can be a frequent operation and it is already clear when (or not) a MTU change is successful, demote prints to debug prints. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: qcom/emac: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-5/+2
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-4/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-7/+5
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner12-108/+12
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13net: qualcomm: emac: replace dev_kfree_skb_irq by dev_consume_skb_irq for ↵Yang Wei1-1/+1
drop profiles dev_consume_skb_irq() should be called in emac_mac_tx_process() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-1/+1
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-14net: qcom/emac: Add missing of_node_put()YueHaibing1-0/+1
Add missing of_node_put() call for device node returned by of_parse_phandle(). Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: qcom/emac: fix device tree initializationTimur Tabi1-3/+13
Commit "net: qcom/emac: Encapsulate sgmii ops under one structure" introduced the sgmii_ops structure, but did not correctly initialize it on device tree platforms. This resulted in compiler warnings when ACPI is not enabled. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: qcom/emac: Allocate buffers from local nodeHemanth Puranik1-2/+4
Currently we use non-NUMA aware allocation for TPD and RRD buffers, this patch modifies to use NUMA friendly allocation. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: qcom/emac: Encapsulate sgmii ops under one structureHemanth Puranik4-71/+103
This patch introduces ops structure for sgmii, This by ensures that we do not need dummy functions in case of emulation platforms. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07net: qcom/emac: Use proper free methods during TXHemanth Puranik1-9/+14
This patch fixes the warning messages/call traces seen if DMA debug is enabled, In case of fragmented skb's memory was allocated using dma_map_page but freed using dma_unmap_single. This patch modifies buffer allocations in TX path to use dma_map_page in all the places and dma_unmap_page while freeing the buffers. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net: qcom/emac: extend DMA mask to 46bitsWang Dongsheng2-3/+7
Bit TPD3[31] is used as a timestamp bit if PTP is enabled, but it's used as an address bit if PTP is disabled. Since PTP isn't supported by the driver, we can extend the DMA address to 46 bits. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: qcom/emac: Change the order of mac up and sgmii openHemanth Puranik1-3/+3
This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: qcom/emac: Reduce timeout for mdio read/writeHemanth Puranik1-3/+4
Currently mdio read/write takes around ~115us as the timeout between status check is set to 100us. By reducing the timeout to 1us mdio read/write takes ~15us to complete. This improves the link up event response. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12Revert "net: qcom/emac: enforce DMA address restrictions"Timur Tabi1-24/+15
This reverts commit df1ec1b9d0df57e96011f175418dc95b1af46821. It turns out that memory allocated via dma_alloc_coherent is always aligned to the size of the buffer, so there's no way the RRD and RFD can ever be in separate 32-bit regions. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qcom/emac: clean up some TX/RX error messagesTimur Tabi2-13/+10
Some of the error messages that are printed by the interrupt handlers are poorly written. For example, many don't include a device prefix, so there's no indication that they are EMAC errors. Also use rate limiting for all messages that could be printed from interrupt context. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qcom/emac: enforce DMA address restrictionsTimur Tabi1-15/+24
The EMAC has a restriction that the upper 32 bits of the base addresses for the RFD and RRD rings must be the same. The ensure that restriction, we allocate twice the space for the RRD and locate it at an appropriate address. We also re-arrange the allocations so that invalid addresses are even less likely. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qcom/emac: remove unused address arraysTimur Tabi1-13/+3
The EMAC is capable of multiple TX and RX rings, but the driver only supports one ring for each. One function had some left-over unused code that supports multiple rings, but all it did was make the code harder to read. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qcom/emac: specify the correct DMA maskTimur Tabi1-13/+4
The 64/32-bit DMA mask hackery in the EMAC driver is not actually necessary, and is technically not accurate. The EMAC hardware is limted to a 45-bit DMA address. Although no EMAC-enabled system can have that much DDR, an IOMMU could possible provide a larger address. Rather than play games with the DMA mappings, the driver should provide a correct value and trust the DMA/IOMMU layers to do the right thing. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05net: qcom/emac: make function emac_isr staticColin Ian King1-1/+1
The function emac_isr is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'emac_isr' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25net: qcom/emac: specify the correct size when mapping a DMA bufferTimur Tabi1-1/+2
When mapping the RX DMA buffers, the driver was accidentally specifying zero for the buffer length. Under normal circumstances, SWIOTLB does not need to allocate a bounce buffer, so the address is just mapped without checking the size field. This is why the error was not detected earlier. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Cc: stable@vger.kernel.org Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: qcom/emac: add software control for pause frame modeTimur Tabi4-0/+58
The EMAC has the option of sending only a single pause frame when flow control is enabled and the RX queue is full. Although sending only one pause frame has little value, this would allow admins to enable automatic flow control without having to worry about the EMAC flooding nearby switches with pause frames if the kernel hangs. The option is enabled by using the single-pause-mode private flag. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: qcom/emac: fix double free of SGMII IRQ during shutdownTimur Tabi1-4/+6
If the interface is not up, then don't try to close it during a shutdown. This avoids possible double free of the IRQ, which can happen during a shutdown. Fixes: 03eb3eb4d4d5 ("net: qcom/emac: add shutdown function") Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: qcom/emac: add support for emulation systemsTimur Tabi1-2/+21
On emulation systems, the EMAC's internal PHY ("SGMII") is not present, but is not needed for network functionality. So just display a warning message and ignore the SGMII. Tested-by: Philip Elcan <pelcan@codeaurora.org> Tested-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: qcom/emac: do not reset the EMAC during initializationTimur Tabi1-2/+0
On ACPI systems, the driver depends on firmware pre-initializing the EMAC because we don't have access to the clocks, and the EMAC has specific clock programming requirements. Therefore, we don't want to reset the EMAC while we are completing the initialization. Tested-by: Richard Ruigrok <rruigrok@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: qcom/emac: add shutdown functionTimur Tabi1-0/+14
The shutdown function halts all DMA and interrupts, so that all operations are discontinued when the system shuts down, e.g. via kexec or a forced reboot. Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: qcom/emac: do not use hardware mdio automatic pollingTimur Tabi3-93/+6
Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal1-0/+1
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: qcom/emac: optimize QDF2400 SGMII RX/TX impedence valuesTimur Tabi1-0/+6
Adjust the impedance values of the RX and TX lanes in the SGMII block so that they are closer to optimal values. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13net: qcom/emac: fix a sizeof() typoDan Carpenter1-1/+1
We had intended to say "sizeof(u32)" but the "u" is missing. Fortunately, sizeof(32) is also 4, so the original code still works. Fixes: c4e7beea2192 ("net: qcom/emac: add ethtool support for reading hardware registers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net: qcom/emac: add ethtool support for setting ring parametersTimur Tabi1-0/+24
Implement the set_ringparam method, which allows the user to specify the size of the TX and RX descriptor rings. The values are constrained to the limits of the hardware. Since the driver does not use separate queues for mini or jumbo frames, attempts to set those values are rejected. If the interface is already running when the setting is changed, then the interface is reset. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net: qcom/emac: add ethtool support for reading hardware registersTimur Tabi3-81/+119
Implement the get_regs_len and get_regs ethtool methods. The driver returns the values of selected hardware registers. The make the register offsets known to emac_ethtool, the the register offset macros are all combined into one header file. They were inexplicably and arbitrarily split between two files. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: qcom/emac: fix semicolon.cocci warningsWu Fengguang1-1/+1
drivers/net/ethernet/qualcomm/emac/emac-ethtool.c:155:49-50: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Timur Tabi <timur@codeaurora.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: qcom/emac: add ethool support for setting pause parametersTimur Tabi4-18/+48
To support setting the pause parameters, the driver can no longer just mirror the PHY. The set_pauseparam feature allows the driver to force the setting in the MAC, regardless of how the PHY is configured. This means that we now need to maintain an internal state for pause frame support, and so get_pauseparam also needs to be updated. If the interface is already running when the setting is changed, then the interface is reset. Note that if the MAC is configured to enable RX pause frame support (i.e. it transmits pause frames to throttle the other end), but the PHY is configured to block those frames, then the feature will not work. Also some buffer size initialization code into emac_init_adapter(), so that it lives with similar code, including the initializtion of pause frame support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: add an error interrupt handler for the sgmiiTimur Tabi4-7/+153
The SGMII (internal PHY) can report decode errors via an interrupt. It can also report autonegotiation status changes, but we don't need to track those. The SGMII can recover automatically from most decode errors, so we only reset the interface if we get multiple consecutive errors. It's possible for bogus decode errors to be reported while the link is being brought up. The interrupt is registered when the interface is opened, and it's enabled after the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: remove extraneous wake-on-lan codeTimur Tabi2-14/+0
The EMAC driver does not support wake-on-lan, but there is still code left-over that partially enables it. Remove that code and a few macros that support it. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: do not call emac_mac_start twiceTimur Tabi3-4/+1
emac_mac_start() uses information from the external PHY to program the MAC, so it makes no sense to call it before the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: always use autonegotiation to configure the SGMII linkTimur Tabi1-39/+10
Regardless of how the external PHY is configured, the internal PHY (the "SGMII" block) is capable of configuring the SGMII link automatically. When the external PHY link comes up, regardless of how it is configured, the SGMII link is configured automatically. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: display the phy driver info after we connectTimur Tabi2-4/+3
The PHY driver is attached only when the driver calls phy_connect_direct(). Calling phy_attached_print() to display information about the PHY driver prior to that point is meaningless. The interface can be brought down, a new PHY driver can be loaded, and the interface then brought back up. This is the correct time to display information about the attached driver. Since phy_attached_print() also prints information about the interrupt, that needs to be set as well. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-23net: qcom/emac: claim the irq only when the device is openedTimur Tabi3-14/+11
During reset, functions emac_mac_down() and emac_mac_up() are called, so we don't want to free and claim the IRQ unnecessarily. Move those operations to open/close. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-23net: qcom/emac: rename emac_phy to emac_sgmii and move itTimur Tabi9-24/+23
The EMAC has an internal PHY that is often called the "SGMII". This SGMII is also connected to an external PHY, which is managed by phylib. These dual PHYs often cause confusion. In this case, the data structure for managing the SGMII was mis-named and located in the wrong header file. Structure emac_phy is renamed to emac_sgmii to clearly indicate it applies to the internal PHY only. It also also moved from emac_phy.h (which supports the external PHY) to emac_sgmii.h (where it belongs). To keep the changes minimal, only the structure name is changed, not the names of any variables of that type. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-19Revert "net: qcom/emac: configure the external phy to allow pause frames"Timur Tabi1-6/+0
This reverts commit 3e884493448131179a5b7cae1ddca1028ffaecc8. With commit 529ed1275263 ("net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause"), phylib now handles automatically enabling pause frame support in the PHY, and the MAC driver should follow suit. Since the EMAC driver driver does this, we no longer need to force pause frames support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: Remove usage of net_device last_rx memberTobias Klauser1-1/+0
The network stack no longer uses the last_rx member of struct net_device since the bonding driver switched to use its own private last_rx in commit 9f242738376d ("bonding: use last_arp_rx in slave_last_rx()"). However, some drivers still (ab)use the field for their own purposes and some driver just update it without actually using it. Previously, there was an accompanying comment for the last_rx member added in commit 4dc89133f49b ("net: add a comment on netdev->last_rx") which asked drivers not to update is, unless really needed. However, this commend was removed in commit f8ff080dacec ("bonding: remove useless updating of slave->dev->last_rx"), so some drivers added later on still did update last_rx. Remove all usage of last_rx and switch three drivers (sky2, atp and smc91c92_cs) which actually read and write it to use their own private copy in netdev_priv. Compile-tested with allyesconfig and allmodconfig on x86 and arm. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+9
2017-01-12net: qcom/emac: grab a reference to the phydev on ACPI systemsTimur Tabi2-4/+9
Commit 6ffe1c4cd0a7 ("net: qcom/emac: fix of_node and phydev leaks") fixed the problem with reference leaks on phydev, but the fix is device-tree specific. When the driver unloads, the reference is dropped only on DT systems. Instead, it's cleaner if up grab an reference on ACPI systems. When the driver unloads, we can drop the reference without having to check whether we're on a DT system. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10net: qcom/emac: add ethtool supportTimur Tabi4-21/+221
Add support for some ethtool methods: get/set link settings, get/set message level, get statistics, get link status, get ring params, get pause params, and restart autonegotiation. The code to collect the hardware statistics is moved into its own function so that it can be used by "get statistics" method. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-4/+2
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 12:27:49 +0000