summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)AuthorFilesLines
2020-06-24qed: add missing error test for DBG_STATUS_NO_MATCHING_FRAMING_MODEColin Ian King1-1/+2
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum enum dbg_status however there is a missing corresponding entry for this in the array s_status_str. This causes an out-of-bounds read when indexing into the last entry of s_status_str. Fix this by adding in the missing entry. Addresses-Coverity: ("Out-of-bounds read"). Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix "maybe uninitialized" warningAlexander Lobakin1-1/+1
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: reset ILT block sizes before recomputing to fix crashesAlexander Lobakin1-0/+19
Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix use-after-free on recovery and AER handlingAlexander Lobakin1-0/+1
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin3-20/+15
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin1-1/+1
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix NVMe login fails over VFsAlexander Lobakin1-5/+18
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin1-1/+2
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix async event callbacks unregisteringAlexander Lobakin3-5/+7
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15qlcnic: Use kobj_to_dev() insteadWang Qing1-17/+17
Use kobj_to_dev() instead of container_of() Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-10/+10
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-8/+8
Pull networking fixes from David Miller: - Fix the build with certain Kconfig combinations for the Chelsio inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi. - Fix leak in genetlink, from Cong Lang. - Fix out of bounds packet header accesses in seg6, from Ahmed Abdelsalam. - Two XDP fixes in the ENA driver, from Sameeh Jubran - Use rwsem in device rename instead of a seqcount because this code can sleep, from Ahmed S. Darwish. - Fix WoL regressions in r8169, from Heiner Kallweit. - Fix qed crashes in kdump mode, from Alok Prasad. - Fix the callbacks used for certain thermal zones in mlxsw, from Vadim Pasternak. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) net: dsa: lantiq_gswip: fix and improve the unsupported interface error mlxsw: core: Use different get_trend() callbacks for different thermal zones net: dp83869: Reset return variable if PHY strap is read rhashtable: Drop raw RCU deref in nested_table_free cxgb4: Use kfree() instead kvfree() where appropriate net: qed: fixes crash while running driver in kdump kernel vsock/vmci: make vmci_vsock_transport_cb() static net: ethtool: Fix comment mentioning typo in IS_ENABLED() net: phy: mscc: fix Serdes configuration in vsc8584_config_init net: mscc: Fix OF_MDIO config check net: marvell: Fix OF_MDIO config check net: dp83867: Fix OF_MDIO config check net: dp83869: Fix OF_MDIO config check net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment ethtool: linkinfo: remove an unnecessary NULL check net/xdp: use shift instead of 64 bit division crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled inet_connection_sock: clear inet_num out of destroy helper yam: fix possible memory leak in yam_init_driver lan743x: Use correct MAC_CR configuration for 1 GBit speed ...
2020-06-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-0/+10
Pull SCSI updates from James Bottomley: :This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes scsi: cxgb3i: Fix some leaks in init_act_open() scsi: ibmvscsi: Make some functions static scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim scsi: ufs: Fix WriteBooster flush during runtime suspend scsi: ufs: Fix index of attributes query for WriteBooster feature scsi: ufs: Allow WriteBooster on UFS 2.2 devices scsi: ufs: Remove unnecessary memset for dev_info scsi: ufs-qcom: Fix scheduling while atomic issue scsi: mpt3sas: Fix reply queue count in non RDPQ mode scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd() scsi: vhost: Notify TCM about the maximum sg entries supported per command scsi: qla2xxx: Remove return value from qla_nvme_ls() scsi: qla2xxx: Remove an unused function scsi: iscsi: Register sysfs for iscsi workqueue scsi: scsi_debug: Parser tables and code interaction scsi: core: Refactor scsi_mq_setup_tags function scsi: core: Fix incorrect usage of shost_for_each_device scsi: qla2xxx: Fix endianness annotations in source files ...
2020-06-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-2/+0
Pull rdma updates from Jason Gunthorpe: "A more active cycle than most of the recent past, with a few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and flowing through RDMA due to it also introducing a new ULP. The removal of FMR has been a recurring discussion theme for a long time. And the usual smattering of features and bug fixes. Summary: - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits) RDMA/cm: Spurious WARNING triggered in cm_destroy_id() RDMA/mlx5: Return ECE DC support RDMA/mlx5: Don't rely on FW to set zeros in ECE response RDMA/mlx5: Return an error if copy_to_user fails IB/hfi1: Use free_netdev() in hfi1_netdev_free() RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr() RDMA/core: Move and rename trace_cm_id_create() IB/hfi1: Fix hfi1_netdev_rx_init() error handling RDMA: Remove 'max_map_per_fmr' RDMA: Remove 'max_fmr' RDMA/core: Remove FMR device ops RDMA/rdmavt: Remove FMR memory registration RDMA/mthca: Remove FMR support for memory registration RDMA/mlx4: Remove FMR support for memory registration RDMA/i40iw: Remove FMR leftovers RDMA/bnxt_re: Remove FMR leftovers RDMA/mlx5: Remove FMR leftovers RDMA/core: Remove FMR pool API RDMA/rds: Remove FMR support for memory registration RDMA/srp: Remove support for FMR memory registration ...
2020-06-05net: qed: fixes crash while running driver in kdump kernelAlok Prasad3-8/+8
This fixes a crash introduced by recent is_kdump_kernel() check. The source of the crash is that kdump kernel can be loaded on a system with already created VFs. But for such VFs, it will follow a logic path of PF and eventually crash. Thus, we are partially reverting back previous changes and instead use is_kdump_kernel is a single init point of PF init, where we disable SRIOV explicitly. Fixes: 37d4f8a6b41f ("net: qed: Disable SRIOV functionality inside kdump kernel") Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02RDMA: Remove 'max_fmr'Jason Gunthorpe2-2/+0
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/12-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+3
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26qed: Add EDPM mode type for user-fw compatibilityYuval Basson3-0/+5
In older FW versions the completion flag was treated as the ack flag in edpm messages. Expose the FW option of setting which mode the QP is in by adding a flag to the qedr <-> qed API. Flag is added for backward compatibility with libqedr. This flag will be set by qedr after determining whether the libqedr is using the updated version. Fixes: f10939403352 ("qed: Add support for QP verbs") Signed-off-by: Yuval Basson <yuval.bason@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25qlcnic: fix missing release in qlcnic_83xx_interrupt_test.Qiushi Wu1-1/+3
In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21qed: Add XRC to RoCEYuval Basson3-18/+175
Add support for XRC-SRQ's and XRC-QP's for upper layer driver. We maintain separate bitmaps for resource management for srq and xrc-srq, However, the range in FW is one, The xrc-srq's are first and then the srq's follow. Therefore we maintain a srq-id offset. v2: perform cleanups if XRC bitmpas allocation fail. Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Bason <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21qed: changes to ILT to support XRCYuval Basson4-14/+64
First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's. Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Bason <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14qlogic/qede: Add XDP frame size to driverJesper Dangaard Brouer2-1/+2
The driver qede uses a full page, when XDP is enabled. The drivers value in rx_buf_seg_size (struct qede_rx_queue) will be PAGE_SIZE when an XDP bpf_prog is attached. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Link: https://lore.kernel.org/bpf/158945340366.97035.7764939691580349618.stgit@firesoul
2020-05-14net: qed: introduce critical hardware error handlerIgor Russkikh3-1/+153
MCP may signal driver about generic critical failure. Driver has to collect mdump information (get_retain), it pushes that to logs and triggers generic notification on "hardware attention" event. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical fan failure handlerIgor Russkikh2-1/+15
Fan failure is sent by firmware, driver reacts on this error with newly introduced notification path. It will collect dump and shut down the device to prevent physical breakage Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: Implement ndo_tx_timeoutDenis Bolotin2-1/+46
Upon tx timeout detection we do disable carrier and print TX queue info on TX timeout. We then raise hw error condition and trigger service task to handle this. This handler will capture extra debug info and then optionally trigger recovery procedure to try restore function. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: optional hw recovery procedureIgor Russkikh1-0/+24
Driver has an ability to initiate a recovery process as a reaction to detected errors. But the codepath (recovery_process) was disabled and never active. Here we add ethtool private flag to allow user have the recovery procedure activated. We still do not enable this by default though, since in some configurations this is not desirable. E.g. this may impact other PFs/VFs. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: attention clearing propertiesIgor Russkikh5-5/+44
On different hardware events we have to respond differently, on some of hardware indications hw attention (error condition) should be cleared by the driver to continue normal functioning. Here we introduce attention clear flags, and put them on some important events (in aeu_descs). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: cleanup debug related declarationsIgor Russkikh2-21/+16
Thats probably a legacy code had double declaration of some fields. Cleanup this, removing copy and fixing references. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: critical err reporting to management firmwareIgor Russkikh4-0/+161
On various critical errors, notification handler should also report the err information into the management firmware. MFW can interact with server/motherboard backend agents - these are used by server manufacturers to monitor server HW health. Thus, it is important for driver to report on any faulty conditions Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: invoke err notify on critical areasIgor Russkikh5-14/+35
In a number of critical places not only debug trace should be printed, but the appropriate hw error condition should be raised and error handling/recovery should start. Introduce our new qed_hw_err_notify invocation in these places to record and indicate critical error conditions in hardware. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: add hw err scheduled handlerIgor Russkikh2-2/+106
qede (ethernet level driver) registers a callback handler. This handler maintains eth dev state flags/bits to track error processing. It implements in place processing part for nonsleeping context (WARN_ON trigger), and a deferred (delayed work) part which triggers recovery process for recoverable errors. In later patches this atomic handler will come with more meat. We introduce err_flags on ethdevice structure, its being used to record error handling properties. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: adding hw_err states and handlingIgor Russkikh4-0/+78
Here we introduce qed device error tracking flags and error types. qed_hw_err_notify is an entrace point to report errors. It'll notify higher level drivers (qede/qedr/etc) to handle and recover the error. List of posible errors comes from hardware interfaces, but could be extended in future. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11net: qed: Disable SRIOV functionality inside kdump kernelBhupesh Sharma2-4/+8
Since we have kdump kernel(s) running under severe memory constraint it makes sense to disable the qed SRIOV functionality when running the kdump kernel as kdump configurations on several distributions don't support SRIOV targets for saving the vmcore (see [1] for example). Currently the qed SRIOV functionality ends up consuming memory in the kdump kernel, when we don't really use the same. An example log seen in the kdump kernel with the SRIOV functionality enabled can be seen below (obtained via memstrack tool, see [2]): dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) This patch disables the SRIOV functionality inside kdump kernel and with the same applied the memory consumption goes down: dracut-pre-pivot[671]: ======== Report format module_summary: ======== dracut-pre-pivot[671]: Module qed using 124.6MB (1993 pages), peak allocation 124.7MB (1995 pages) [1]. https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/managing_monitoring_and_updating_the_kernel/installing-and-configuring-kdump_managing-monitoring-and-updating-the-kernel#supported-kdump-targets_supported-kdump-configurations-and-targets [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11net: qed*: Reduce RX and TX default ring count when running inside kdump kernelBhupesh Sharma2-2/+11
Normally kdump kernel(s) run under severe memory constraint with the basic idea being to save the crashdump vmcore reliably when the primary kernel panics/hangs. Currently the qed* ethernet driver ends up consuming a lot of memory in the kdump kernel, leading to kdump kernel panic when one tries to save the vmcore via ssh/nfs (thus utilizing the services of the underlying qed* network interfaces). An example OOM message log seen in the kdump kernel can be seen here [1], with crashkernel size reservation of 512M. Using tools like memstrack (see [2]), we can track the modules taking up the bulk of memory in the kdump kernel and organize the memory usage output as per 'highest allocator first'. An example log for the OOM case indicates that the qed* modules end up allocating approximately 216M memory, which is a large part of the total crashkernel size: dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages) This patch reduces the default RX and TX ring count from 1024 to 64 when running inside kdump kernel, which leads to a significant memory saving. An example log with the patch applied shows the reduced memory allocation in the kdump kernel: dracut-pre-pivot[674]: ======== Report format module_summary: ======== dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages) <..snip..> [dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages) Tested crashdump vmcore save via ssh/nfs protocol using underlying qed* network interface after applying this patch. [1] OOM log: ------------ kworker/0:6: page allocation failure: order:6, mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) kworker/0:6 cpuset=/ mems_allowed=0 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025 01/18/2019 Workqueue: events work_for_cpu_fn Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x30 dump_stack+0x90/0xb4 warn_alloc+0xf4/0x178 __alloc_pages_nodemask+0xcac/0xd58 alloc_pages_current+0x8c/0xf8 kmalloc_order_trace+0x38/0x108 qed_iov_alloc+0x40/0x248 [qed] qed_resc_alloc+0x224/0x518 [qed] qed_slowpath_start+0x254/0x928 [qed] __qede_probe+0xf8/0x5e0 [qede] qede_probe+0x68/0xd8 [qede] local_pci_probe+0x44/0xa8 work_for_cpu_fn+0x20/0x30 process_one_work+0x1ac/0x3e8 worker_thread+0x44/0x448 kthread+0x130/0x138 ret_from_fork+0x10/0x18 Cannot start slowpath qede: probe of 0000:05:00.1 failed with error -12 [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: qede: Use true for bool variable in qede_init_fp()Jason Yan1-1/+1
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qede/qede_main.c:1717:5-19: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05qlcnic: use true,false for bool variable in qlcnic_sriov_common.cJason Yan1-2/+2
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1585:3-25: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1588:3-25: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25qlcnic: remove unused inline function qlcnic_hw_write_wx_2MYueHaibing1-6/+0
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23qed: Make ll2_cbs staticZou Wei1-1/+1
Fix the following sparse warning: drivers/net/ethernet/qlogic/qed/qed_ll2.c:2334:20: warning: symbol 'll2_cbs' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23qede: Add support for handling the pcie errors.Sudarsana Reddy Kalluru2-1/+68
The error recovery is handled by management firmware (MFW) with the help of qed/qede drivers. Upon detecting the errors, driver informs MFW about this event which in turn starts a recovery process. MFW sends ERROR_RECOVERY notification to the driver which performs the required cleanup/recovery from the driver side. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23qed: Enable device error reporting capability.Sudarsana Reddy Kalluru1-0/+9
The patch enables the device to send error messages to root port when an error is detected. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20qed: use true,false for bool variablesJason Yan1-2/+2
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qed/qed_dev.c:4395:2-34: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/qlogic/qed/qed_dev.c:1975:2-34: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: qed: Remove unneeded cast from memory allocationAishwarya Ramakrishnan1-9/+8
Remove casting the values returned by memory allocation function. Coccinelle emits WARNING: casting value returned by memory allocation function to struct pointer is useless. This issue was detected by using the Coccinelle. Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-17scsi: qed: Send BW update notifications to the protocol driversSudarsana Reddy Kalluru2-0/+10
Management firmware (MFW) sends a notification whenever there is a change in the bandwidth values. Add driver support for sending this notification to the upper layer drivers (e.g., qedf). Link: https://lore.kernel.org/r/20200416084314.18851-6-skashyap@marvell.com Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-06qed: remove redundant assignment to variable 'rc'Colin Ian King1-1/+1
The variable 'rc' is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30qed: Fix use after free in qed_chain_freeYuval Basson1-22/+16
The qed_chain data structure was modified in commit 1a4a69751f4d ("qed: Chain support for external PBL") to support receiving an external pbl (due to iWARP FW requirements). The pages pointed to by the pbl are allocated in qed_chain_alloc and their virtual address are stored in an virtual addresses array to enable accessing and freeing the data. The physical addresses however weren't stored and were accessed directly from the external-pbl during free. Destroy-qp flow, leads to freeing the external pbl before the chain is freed, when the chain is freed it tries accessing the already freed external pbl, leading to a use-after-free. Therefore we need to store the physical addresses in additional to the virtual addresses in a new data structure. Fixes: 1a4a69751f4d ("qed: Chain support for external PBL") Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Bason <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29qed: Fix race condition between scheduling and destroying the slowpath workqueueYuval Basson1-11/+2
Calling queue_delayed_work concurrently with destroy_workqueue might race to an unexpected outcome - scheduled task after wq is destroyed or other resources (like ptt_pool) are freed (yields NULL pointer dereference). cancel_delayed_work prevents the race by cancelling the timer triggered for scheduling a new task. Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests") Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Basson <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26qlcnic: Fix bad kzalloc null testXu Wang1-1/+1
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*Jakub Kicinski1-1/+1
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16qede: remove some unused code in function qede_selftest_receive_trafficZheng Zengkai1-12/+1
Remove set but not used variables 'sw_comp_cons' and 'hw_comp_cons' to fix gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:20: warning: variable sw_comp_cons set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:6: warning: variable hw_comp_cons set but not used [-Wunused-but-set-variable] After removing 'hw_comp_cons',the memory barrier 'rmb()' and its comments become useless, so remove them as well. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 20:30:02 +0000