summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/netronome
AgeCommit message (Collapse)AuthorFilesLines
2019-06-14nfp: flower: extend extack messaging for flower match and actionsPieter Jansen van Vuuren6-77/+196
Use extack messages in flower offload when compiling match and actions messages that will configure hardware. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nfp: flower: use extack messages in flower offloadPieter Jansen van Vuuren1-25/+80
Use extack messages in flower offload, specifically focusing on the extack use in add offload, remove offload and get stats paths. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nfp: flower: check L4 matches on unknown IP protocolsPieter Jansen van Vuuren1-2/+11
Matching on fields with a protocol that is unknown to hardware is not strictly unsupported. Determine if hardware can offload a filter with an unknown protocol by checking if any L4 fields are being matched as well. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nfp: print a warning when binding VFs to PF driverJakub Kicinski1-0/+4
Users sometimes mistakenly try to manually bind the PF driver to the VFs, print a warning message in that case. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nfp: update the old flash error messageJakub Kicinski1-1/+6
Apparently there are still cards in the wild with a very old management FW. Let's make the error message in that case indicate more clearly that management firmware has to be updated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: make use of kernel-driven TX resyncJakub Kicinski3-12/+18
When TCP stream gets out of sync (driver stops receiving skbs with expected TCP sequence numbers) request a TX resync from the kernel. We try to distinguish retransmissions from missed transmissions by comparing the sequence number to expected - if it's further than the expected one - we probably missed packets. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net/tls: generalize the resync callbackJakub Kicinski1-3/+6
Currently only RX direction is ever resynced, however, TX may also get out of sequence if packets get dropped on the way to the driver. Rename the resync callback and add a direction parameter. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: enable TLS RX offloadJakub Kicinski3-6/+26
Set ethtool TLS RX feature based on NIC capabilities, and enable TLS RX when connections are added for decryption. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: implement RX TLS resyncDirk van der Merwe1-0/+32
Enable kernel-controlled RX resync and propagate TLS connection RX resync from kernel TLS to firmware. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: add async version of mailbox communicationJakub Kicinski4-22/+215
Some control messages must be sent from atomic context. The mailbox takes sleeping locks and uses a waitqueue so add a "posted" version of communication. Trylock the semaphore and if that's successful kick of the device communication. The device communication will be completed from a workqueue, which will also release the semaphore. If locks are taken queue the message and return. Schedule a different workqueue to take the semaphore and run the communication. Note that the there are currently no atomic users which would actually need the return value, so all replies to posted messages are just freed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: rename nfp_ccm_mbox_alloc()Jakub Kicinski3-8/+8
We need the name nfp_ccm_mbox_alloc() for allocating the mailbox communication channel itself. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: set skb decrypted flagDirk van der Merwe3-9/+22
Firmware indicates when a packet has been decrypted by reusing the currently unused BPF flag. Transfer this information into the skb and provide a statistic of all decrypted segments. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: tls: add basic statisticsJakub Kicinski4-12/+64
Count TX TLS packets: successes, out of order, and dropped due to missing record info. Make sure the RX and TX completion statistics don't share cache lines with TX ones as much as possible. With TLS stats they are no longer reasonably aligned. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: tls: add/delete TLS TX connectionsDirk van der Merwe2-2/+303
This patch adds the functionality to add and delete TLS connections on the NFP, received from the kernel TLS callbacks. Make use of the common control message (CCM) infrastructure to propagate the kernel state to firmware. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: tls: add datapath support for TLS TXDirk van der Merwe3-0/+65
Prepend connection handle to each transmitted TLS packet. For each connection, the driver tracks the next sequence number expected. If an out of order packet is observed, the driver calls into the TLS kernel code to reencrypt that particular skb. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: prepare for more TX metadata prependJakub Kicinski2-10/+35
Subsequent patches will add support for more TX metadata fields. Prepare for this by handling an additional double word - firmware handle as metadata type 7. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: add tls init codeJakub Kicinski9-2/+245
Add FW ABI defines and code for basic init of TLS offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: parse crypto opcode TLVJakub Kicinski2-0/+21
Parse TLV containing a bitmask of supported crypto operations. The TLV contains a capability bitmask (supported operations) and enabled bitmask. Each operation describes the crypto protocol quite exhaustively (protocol, AEAD, direction). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: add support for sending control messages via mailboxJakub Kicinski7-8/+646
FW may prefer to handle some communication via a mailbox or the vNIC may simply not have a control queue (VFs). Add a way of exchanging ccm-compatible messages via a mailbox. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: parse the mailbox cmsg TLVJakub Kicinski2-0/+12
Parse the mailbox TLV. When control message queue is not available we can fall back to passing the control messages via the vNIC mailbox. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: make bar_lock a semaphoreJakub Kicinski2-10/+5
We will need to release the bar lock from a workqueue so move from a mutex to a semaphore. This lock should not be too hot. Unfortunately semaphores don't have lockdep support. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06nfp: count all failed TX attempts as errorsJakub Kicinski1-7/+5
Currently if we need to modify the head of the skb and allocation fails we would free the skb and not increment the error counter. Make sure all errors are counted. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05nfp: flower: use struct_size() helperGustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct nfp_tun_active_tuns { ... struct route_ip_info { __be32 ipv4; __be32 egress_port; __be32 extra[2]; } tun_info[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(struct nfp_tun_active_tuns) + sizeof(struct route_ip_info) * count with: struct_size(payload, tun_info, count) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24nfp: bpf: eliminate zero extension code-genJiong Wang3-48/+81
This patch eliminate zero extension code-gen for instructions including both alu and load/store. The only exception is for ctx load, because offload target doesn't go through host ctx convert logic so we do customized load and ignores zext flag set by verifier. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-21Merge tag 'spdx-5.2-rc2' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14nfp: flower: add rcu locks when accessing netdev for tunnelsPieter Jansen van Vuuren1-6/+11
Add rcu locks when accessing netdev when processing route request and tunnel keep alive messages received from hardware. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Fixes: 856f5b135758 ("nfp: flower vxlan neighbour keep-alive") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09nfp: add missing kdocJakub Kicinski1-0/+2
Add missing kdoc for app member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09nfp: bpf: fix static check error through tightening shift amount adjustmentJiong Wang1-1/+12
NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b3651f6 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-08nfp: reintroduce ndo_get_port_parent_id for representor portsPieter Jansen van Vuuren2-0/+17
NFP does not register devlink ports for representors (without the "devlink: expose PF and VF representors as ports" series there are no port flavours to expose them as). Commit c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") went to far in removing ndo_get_port_parent_id for representors. This causes redirection offloads to fail, and switch_id attribute missing. Reintroduce the ndo_get_port_parent_id callback for representor ports. Fixes: c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net/sched: remove block pointer from common offload structurePieter Jansen van Vuuren3-2/+8
Based on feedback from Jiri avoid carrying a pointer to the tcf_block structure in the tc_cls_common_offload structure. Instead store a flag in driver private data which indicates if offloads apply to a shared block at block binding time. Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05nfp: flower: add qos offload stats request and replyPieter Jansen van Vuuren5-0/+210
Add stats request function that sends a stats request message to hw for a specific police-filter. Process stats reply from hw and update the stored qos structure. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05nfp: flower: add qos offload install and remove functionality.Pieter Jansen van Vuuren3-1/+174
Add install and remove offload functionality for qos offloads. We first check that a police filter can be implemented by the VF rate limiting feature in hw, then we install the filter via the qos infrastructure. Finally we implement the mechanism for removing these types of filters. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05nfp: flower: add qos offload frameworkPieter Jansen van Vuuren4-1/+29
Introduce matchall filter offload infrastructure that is needed to offload qos features like policing. Subsequent patches will make use of police-filters for ingress rate limiting. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26nfp: implement PCI driver shutdown callbackDirk van der Merwe2-5/+30
Device may be shutdown without the hardware being reinitialized, in which case we want to ensure we cleanup properly. This is especially important for kexec with traffic flowing. The shutdown procedures resembles the remove procedures, so we can reuse those common tasks. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22net: devlink: Add extack to shared buffer operationsIdo Schimmel1-1/+2
Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19nfp: add SR-IOV trusted VF supportPablo Cascón4-2/+33
By default VFs are not trusted. Add ndo_set_vf_trust support to toggle a new per-VF bit. Coupled with FW with this capability allows a trusted VF to change its MAC even after being administratively set by the PF. Also populate the trusted field on ndo_get_vf_config. Add the same ndo to the representors. Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19nfp: flower: fix size_t compile warningJohn Hurley1-1/+1
A recent addition to NFP introduced a function that formats a string with a size_t variable. This is formatted with %ld which is fine on 64-bit architectures but produces a compile warning on 32-bit architectures. Fix this by using the z length modifier. Fixes: a6156a6ab0f9 ("nfp: flower: handle merge hint messages") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17nfp: abm: fix spelling mistake "offseting" -> "offsetting"Colin Ian King1-2/+2
There are a couple of spelling mistakes in NL_SET_ERR_MSG_MOD error messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-16nfp: flower: fix implicit fallthrough warningJohn Hurley1-0/+1
The nfp_flower_copy_pre_actions function introduces a case statement with an intentional fallthrough. However, this generates a warning if built with the -Wimplicit-fallthrough flag. Remove the warning by adding a fall through comment. Fixes: 1c6952ca587d ("nfp: flower: generate merge flow rule") Signed-off-by: John Hurley <john.hurley@netronome.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: offload merge flowsJohn Hurley4-13/+126
A merge flow is formed from 2 sub flows. The match fields of the merge are the same as the first sub flow that has formed it, with the actions being a combination of the first and second sub flow. Therefore, a merge flow should replace sub flow 1 when offloaded. Offload valid merge flows by using a new 'flow mod' message type to replace an existing offloaded rule. Track the deletion of sub flows that are linked to a merge flow and revert offloaded merge rules if required. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: support stats update for merge flowsJohn Hurley2-0/+117
With the merging of 2 sub flows, a new 'merge' flow will be created and written to FW. The TC layer is unaware that the merge flow exists and will request stats from the sub flows. Conversely, the FW treats a merge rule the same as any other rule and sends stats updates to the NFP driver. Add links between merge flows and their sub flows. Use these links to pass merge flow stats updates from FW to the underlying sub flows, ensuring TC stats requests are handled correctly. The updating of sub flow stats is done on (the less time critcal) TC stats requests rather than on FW stats update. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: generate merge flow ruleJohn Hurley2-1/+150
When combining 2 sub_flows to a single 'merge flow' (assuming the merge is valid), the merge flow should contain the same match fields as sub_flow 1 with actions derived from a combination of sub_flows 1 and 2. This action list should have all actions from sub_flow 1 with the exception of the output action that triggered the 'implicit recirculation' by sending to an internal port, followed by all actions of sub_flow 2. Any pre-actions in either sub_flow should feature at the start of the action list. Add code to generate a new merge flow and populate the match and actions fields based on the sub_flows. The offloading of the flow is left to future patches. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: validate merge hint flowsJohn Hurley1-0/+228
Two flows can be merged if the second flow (after recirculation) matches on bits that are either matched on or explicitly set by the first flow. This means that if a packet hits flow 1 and recirculates then it is guaranteed to hit flow 2. Add a 'can_merge' function that determines if 2 sub_flows in a merge hint can be validly merged to a single flow. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: handle merge hint messagesJohn Hurley4-1/+78
If a merge hint is received containing 2 flows that are matched via an implicit recirculation (sending to and matching on an internal port), fw reports that the flows (called sub_flows) may be able to be combined to a single flow. Add infastructure to accept and process merge hint messages. The actual merging of the flows is left as a stub call. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: get flows by host contextJohn Hurley2-16/+89
Each flow is given a context ID that the fw uses (along with its cookie) to identity the flow. The flows stats are updated by the fw via this ID which is a reference to a pre-allocated array entry. In preparation for flow merge code, enable the nfp_fl_payload structure to be accessed via this stats context ID. Rather than increasing the memory requirements of the pre-allocated array, add a new rhashtable to associate each active stats context ID with its rule payload. While adding new code to the compile metadata functions, slightly restructure the existing function to allow for cleaner, easier to read error handling. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: allow tunnels to output to internal portJohn Hurley1-3/+4
The neighbour table in the FW only accepts next hop entries if the egress port is an nfp repr. Modify this to allow the next hop to be an internal port. This means that if a packet is to egress to that port, it will recirculate back into the system with the internal port becoming its ingress port. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: flower: support fallback packets from internal portsJohn Hurley1-2/+24
FW may receive a packet with its ingress port marked as an internal port. If a rule does not exist to match on this port, the packet will be sent to the NFP driver. Modify the flower app to detect packets from such internal ports and convert the ingress port to the correct kernel space netdev. At this point, it is assumed that fallback packets from internal ports are to be sent out said port. Therefore, set the redir_egress bool to true on detection of these ports. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15nfp: allow fallback packets from non-reprsJohn Hurley6-16/+30
Currently, it is assumed that fallback packets will be from reprs. Modify this to allow an app to receive non-repr ports from the fallback channel - e.g. from an internal port. If such a packet is received, do not update repr stats. Change the naming function calls so as not to imply it will always be a repr netdev returned. Add the option to set a bool value to redirect a fallback packet out the returned port rather than RXing it. Setting of this bool in subsequent patches allows the handling of packets falling back when they are due to egress an internal port. Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-01 18:22:36 +0000