summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/switchx2.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-26mlxsw: switchx2: Move SwitchX-2 trap groups out of main enumIdo Schimmel1-0/+5
The number of Spectrum trap groups is not infinite, but two identifiers are occupied by SwitchX-2 specific trap groups. Free these identifiers by moving them out of the main enum. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload ↵Jiri Pirko1-0/+8
fails In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths. Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: switchx2: Remove unnecessary conversion to boolIdo Schimmel1-1/+1
Suppress following warning from coccinelle: drivers/net/ethernet/mellanox/mlxsw//switchx2.c:183:63-68: WARNING: conversion to bool not needed here Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: switchx2: Do not modify cloned SKBs during xmitIdo Schimmel1-11/+6
The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko1-1/+2
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko1-0/+1
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: Remove 56G speed supportAmit Cohen1-6/+0
Commit 275e928f1911 ("mlxsw: spectrum: Prevent force of 56G") prevented the driver from setting a speed of 56G when auto-negotiation is off. This is the only speed supported by mlxsw that cannot be set when auto-negotiation is off, which makes it difficult to write generic tests. Further, the speed is not supported by newer ASICs such as Spectrum-2 and to the best of our knowledge it is not used by current users. Therefore, remove 56G support from mlxsw. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01mlxsw: core: Add support for using SKB control bufferPetr Machata1-0/+2
The SKB control buffer is useful (and used) for bookkeeping of information related to that SKB. Add helpers so that the mlxsw driver(s) can safely use the buffer as well. The structure is currently empty, individual users will add members to it as necessary. Note that SKB allocation functions already clear the buffer, so the cleanup is only necessary when ndo_start_xmit is called. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04mlxsw: Remove ndo_get_port_parent_id implementationJiri Pirko1-13/+0
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04mlxsw: Pass switch ID through devlink_port_attrs_set()Jiri Pirko1-1/+2
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Remove ndo_get_phys_port_name implementationJiri Pirko1-11/+0
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Implement ndo_get_devlink_portJiri Pirko1-0/+11
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24mlxsw: Move devlink_port_attrs_set() call before registerJiri Pirko1-2/+3
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06mlxsw: Implement ndo_get_port_parent_id()Florian Fainelli1-24/+13
mlxsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko1-35/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19mlxsw: use devlink helper to generate physical port nameJiri Pirko1-6/+3
Since devlink knows the info needed to generate the physical port name in a generic way for all devlink users, use the helper to do the job. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: introduce devlink_port_attrs_setJiri Pirko1-1/+1
Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: Move "resources_query_enable" out of mlxsw_config_profileJiri Pirko1-1/+0
As struct mlxsw_config_profile is mapped to the payload of the FW command of the same name, resources_query_enable flag does not belong there. Move it to struct mlxsw_driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22mlxsw: spectrum: Add support for auto-negotiation disable modeTal Bar1-4/+4
In 'auto-neg off' the device have sent AN (auto-negotiation) frames with the forced speed. Thus, fix it using an_disable_admin field in Port type and speed (PTYS) register. This field indicates if speed negotiation frames would be send by the port or not. Add the field and enable/disable it for 'auto-neg on/off', make the port to start/stop sending AN (auto-negotiation) frames. Note that for SwitchX2 the behavior doesn't change (i.e support only AN enabled with forced speed). Signed-off-by: Tal Bar <talb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11mlxsw: make mlxsw_config_profile constBhumika Goyal1-1/+1
Make these structures const as they only stored in the profile field of a mlxsw_driver structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24mlxsw: Query maximum number of ports from firmwareIdo Schimmel1-3/+4
We currently hard code the maximum number of ports in the driver, but this may change in future devices, so query it from the firmware instead. Fallback to a maximum of 64 ports in case this number can't be queried. This should only happen in SwitchX-2 for which this number is correct. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: mellanox: switchx2: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-17/+30
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2017-01-12mlxsw: switchx2: Fix memory leak at skb reallocationArkadi Sharshevsky1-0/+1
During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: d003462a50de ("mlxsw: Simplify mlxsw_sx_port_xmit function") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-2/+1
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Create a different trap group list for each deviceNogah Frankel1-4/+4
Trap groups can be used to control traps priority, both in terms of which trap "wins" if a packet matches two traps (priority) and in terms of packets from which trap group will be scheduled to the cpu first (tc). They can also be used to set rate limiters (policers) on them (will be added in the next patches). Currently, we support two trap groups. In Spectrum we want a better resolution, so every protocol / flow will have a different trap group, so we can control its parameters separately. Once the policers will be implemented, it will also allow us limit the rate of each protocol by itself. This patch change the trap group list to include: * the emad trap group, which is shared for all the devices. * Switchx2's trap groups, which are a copy of the current trap groups. * Spectrum's new trap groups, in order to match the above guidelines. (Switchib is using only the emad trap group, so it require no changes). This patch also includes new configuration for Spectrum's trap groups, with primary priority order within them. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Change trap groups settingNogah Frankel1-3/+21
Trap groups have many options which we currently set to default values. In the next patches we will use many of them with non-default values. Some of these options have no default value, so this patch sets them as params for the trap group set function. Others almost always use the same values, so the set function will use this default values. In the rare cases when they will need to be with other values, these values can be set directly (using the macros for fields in registers). Parameters without default value: TC - the traffic class for packets that hit this trap group. (old default is the max tc) priority - if one packet hits multiple trap groups, the group with the higher priority will "catch" it. (old default is 0) policer - limit rate policer (old default is disabled) Default parameters: swid - switch id, relevant for the emad trap only, ignored on Spectrum. (new default is 0) rdq - CPU receive descriptor queue (new default is identical to trap group id) Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Change emad trap group settingsNogah Frankel1-0/+9
Currently, the emad trap init was done in the core. In the future we will want to add some changes to the traps groups, according to device type. This commit create a driver function to create the trap group for the emad, so later it can be changed by devices. It also changes the emad registration to use the new generic functions. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Add option to choose trap groupNogah Frankel1-2/+2
Currently, we set the trap group to pre-determined option, based on whether it is an rx or event trap. This commit adds a possibility to chose the trap group, so it can be set to different values in the following patches. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Change trap set functionNogah Frankel1-2/+3
Change trap setting function so instead of determining the trap group by trap id, it gets it as a parameter (so later we can have different trap groups for Spectrum and Switchx2). Add "is_ctrl" parameter to the trap setting function. It control whether the trapped packets wait in a designated control buffer or in their default one. This parameter is ignored by Switchx2 and Switchib. Add these parameters to the traps array in Spectrum, Switchx2 and Switchib. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: switchx2: Use generic listener struct for eventsNogah Frankel1-66/+12
Change the events to use the generic listener struct. Merge the event list into the trap list, so the same functions will handle both. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: switchx2: Use generic listener struct for rx trapsNogah Frankel1-100/+27
Reorganize the traps to use the new generic listener struct and functions. Use macros to shorten the traps list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-05mlxsw: Remove unused including <generated/utsrelease.h>Wei Yongjun1-1/+0
Remove including <generated/utsrelease.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add IB port supportElad Raz1-19/+210
SwitchX-2 is IB capable device. This patch add a support to change the port type between Ethernet and Infiniband. When the port is set to IB, the FW implements the Subnet Management Agent (SMA) manage the port. All port attributes can be control remotely by the SM. Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add eth prefix to port create and removeElad Raz1-11/+11
Since we are about to add Infiniband port remove and create we will add "eth" prefix to port create and remove APIs. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: core: Add "eth" prefix to mlxsw_core_port_setElad Raz1-2/+2
Since we are about to introduce IB port APIs, we will add prefixes to existing APIs. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add Infiniband switch partitionElad Raz1-1/+5
In order to put a port in Infiniband fabric it should be assigned to separate swid (Switch partition) that initialized as IB swid. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: Make devlink port instances independent of spectrum/switchx2 port ↵Jiri Pirko1-15/+34
instances Currently, devlink register/unregister is done directly from spectrum/switchx2 port create/remove functions. With a need to introduce a port type change, the devlink port instances have to be persistent across type changes, therefore across port create/remove function calls. So do a bit of reshuffling to achieve that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: reg: Add eth prefix to PTYS pack and unpackElad Raz1-8/+10
We want to add Infiniband support to PTYS. In order to maintain proper conventions, we will change pack and unpack prefix to eth. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Fix port speed configurationElad Raz1-7/+23
In SwitchX-2 we configure the port speed to negotiate with 40G link only. Add support for all other supported speeds. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add support for physical port namesElad Raz1-5/+27
Export to userspace the front panel name of the port, so that udev can rename the ports accordingly. The convention suggested by switchdev documentation is used: pX Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Move port used check outside port remove functionJiri Pirko1-4/+10
Be symmentrical with create and do the check outside the remove function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Check if port is usable before calling port createJiri Pirko1-21/+11
Do it in a same way we do it in spectrum. Check if port is usable first and only in that case create a port instance. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: core: Zero payload buffers for couple of registersElad Raz1-1/+1
We recently discovered a bug in the firmware in which a field's length in one of the registers was incorrectly set. This caused the firmware to access garbage data that wasn't initialized by the driver and therefore emit error messages. While the bug is already fixed and the driver usually zeros the buffers passed to the firmware, there are a handful of cases where this isn't done. Zero the buffer in these cases and prevent similar bugs from recurring, as they tend to be hard to debug. Fixes: 52581961d83d ("mlxsw: core: Implement fan control using hwmon") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: switchx2: Set physical device for port netdeviceJiri Pirko1-0/+1
Do this so the sysfs has "device" link correctly set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: Move PCI id table definitions into driver modulesJiri Pirko1-4/+30
So far, mlxsw_pci.ko is the module that registers PCI table for all drivers (spectrum and switchx2). That is problematic for example with dracut. Since mlxsw_spectrum.ko and mlxsw_switchx2.ko are loaded dynamically from within mlxsw_core.ko, dracut does not have track of them and avoids them from being included in initramfs. So make this in an ordinary way and define the PCI tables in individual driver modules, so it can be properly loaded and included in dracut initramfs image. As a side effect, this patch could remove no longer necessary driver "kind" strings which were used to link PCI ids with individual mlxsw drivers. Suggested-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: item: Make char *buf arg constant for gettersJiri Pirko1-1/+1
Enforce const for getter buf args. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson1-0/+3
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: switchx2: Fix ethernet port initializationElad Raz1-0/+1
When creating an ethernet port fails, we must move the port to disable, otherwise putting the port in switch partition 0 (ETH) or 1 (IB) will always fails. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 10:43:19 +0000