summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2014-07-09mlx5_core: Fix possible race between mr tree insert/deleteSagi Grimberg1-4/+15
In mlx5_core_destroy_mkey(), we must first remove the mr from the radix tree and then destroy it. Otherwise we might hit a race if the key was reallocated and we attempted to insert it to the radix tree. Also handle radix tree insert/delete failures. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Eli Cohen <elic@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds7-37/+47
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-05-27mlx5_core: Store MR attributes in mlx5_mr_core during creation and after UMRHaggai Eran1-0/+4
The patch stores iova, pd and size during mr creation and after UMRs that modify them. It removes the unused access flags field. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-08mellanox: Logging message cleanupsJoe Perches7-37/+47
Use a more current logging style. o Coalesce formats o Add missing spaces for coalesced formats o Align arguments for modified formats o Add missing newlines for some logging messages o Use DRV_NAME as part of format instead of %s, DRV_NAME to reduce overall text. o Use ..., ##__VA_ARGS__ instead of args... in macros o Correct a few format typos o Use a single line message where appropriate Signed-off-by: Joe Perches <joe@perches.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds2-0/+86
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
2014-03-10IB/mlx5_core: remove unreachable function call in module initKleber Sacilotto de Souza1-1/+0
The call to mlx5_health_cleanup() in the module init function can never be reached. Removing it. Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07IB/mlx5: Keep mlx5 MRs in a radix tree under deviceSagi Grimberg2-0/+25
This will be useful when processing signature errors on a specific key. The mlx5 driver will lookup the matching mlx5 memory region structure and mark it as dirty (contains signature errors). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07mlx5: Implement create_mr and destroy_mrSagi Grimberg1-0/+61
Support create_mr and destroy_mr verbs. Creating ib_mr may be done for either ib_mr that will register regular page lists like alloc_fast_reg_mr routine, or indirect ib_mrs that can register other (pre-registered) ib_mrs in an indirect manner. In addition user may request signature enable, that will mean that the created ib_mr may be attached with signature attributes (BSF, PSVs). Currently we only allow direct/indirect registration modes. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net,IB/mlx: Bump all Mellanox driver versionsAmir Vadai1-2/+2
Bump all Mellanox driver versions. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18mlx5: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Eli Cohen <eli@mellanox.com> Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13IB/mlx5: Remove dependency on X86Eli Cohen1-1/+1
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+0
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-22IB/mlx5: Abort driver cleanup if teardown hca failsEli Cohen1-2/+8
Do not continue with cleanup flow. If this ever happens we can check which resources remained open. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix PowerPC supportEli Cohen1-4/+5
1. Fix derivation of sub-page index from the dma address in free_4k. 2. Fix the DMA address passed to dma_unmap_page by masking it properly. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Improve debugfs readabilityEli Cohen1-6/+33
Use strings to display transport service or state of QPs. Use numeric value for MTU of a QP. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Add support for resize CQEli Cohen1-2/+2
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Implement modify CQEli Cohen1-2/+15
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Use mlx5 core style warningEli Cohen1-1/+2
Use mlx5_core_warn(), which is the standard warning emitter function, instead of pr_warn(). Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Clear out struct before create QP commandEli Cohen1-1/+1
Output structs are expected by firmware to be cleared when a command is called. Clear the "out" struct instead of "dout" which is used only later. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix out arg size in access_register commandHaggai Eran1-1/+1
The output size should be the sum of the core access reg output struct plus the size of the specific register data provided by the caller. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14mlx5_core: Remove dead codeDan Carpenter1-3/+1
Remove leftover of debug code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/mlx5: Fix list_del of empty listEli Cohen1-1/+2
For archs with pages size of 4K, when the chunk is freed, fwp is not in the list so avoid attempting to delete it. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08mlx5: Use enum to indicate adapter page sizeEli Cohen1-1/+1
The Connect-IB adapter has an inherent page size which equals 4K. Define an new enum that equals the page shift and use it instead of using the value 12 throughout the code. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08mlx5_core: Change optimal_reclaimed_pages for better performanceMoshe Lazer1-2/+7
Change optimal_reclaimed_pages() to increase the output size of each reclaim pages command. This change reduces significantly the amount of reclaim pages commands issued to FW when the driver is unloaded which reduces the overall driver unload time. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08mlx5: Clear reserved area in set_hca_cap()Eli Cohen1-3/+32
Firmware spec requires reserved fields to be cleared when calling set_hca_cap. Current code queries and copy to the set area, possibly resulting in reserved bits not cleared. This patch copies only writable fields to the set area. Fix also typo - msx => max Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08mlx5: Support communicating arbitrary host page size to firmwareEli Cohen2-55/+121
Connect-IB firmware requires 4K pages to be communicated with the driver. This patch breaks larger pages to 4K units to enable support for architectures utilizing larger page size, such as PowerPC. This patch also fixes several places that referred to PAGE_SHIFT instead of explicit 12 which is the inherent page shift on Connect-IB. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08mlx5: Fix cleanup flow when DMA mapping failsEli Cohen1-5/+13
If DMA mapping fails, the driver cleared the object that holds the previously DMA mapped pages. Fix this by allocating a new object for the command that reports back to firmware that pages can't be supplied. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08IB/mlx5: Multithreaded create MREli Cohen3-42/+104
Use asynchronous commands to execute up to eight concurrent create MR commands. This is to fill memory caches faster so we keep consuming from there. Also, increase timeout for shrinking caches to five minutes. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix eq names to display nicely in /proc/interruptsSagi Grimberg1-1/+3
It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix error code translation from firmware to driverEli Cohen1-1/+1
Limits exceeded should be translated to ENOMEM. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Keep polling to reclaim pages while any returnedEli Cohen1-2/+14
Change mlx5_reclaim_startup_pages() to keep polling while any pages are returned. If none are returned, keep polling for five more seconds before exiting with an error message. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Remove checksum on command interface commandsEli Cohen2-28/+19
Checksum calculations consume CPU resources and can be significant to the rate of resource creation/destruction. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-06mlx5: remove unused MLX5_DEBUG param in KconfigMichael Opdenacker1-10/+0
This patch proposes to remove the MLX5_DEBUG kernel configuration parameter defined in drivers/net/ethernet/mellanox/mlx5/core/Kconfig, but used nowhere in the makefiles and source code. This could also be fixed by using this parameter, but this may be a leftover from driver development... Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changesMoshe Lazer4-35/+29
In the previous QUERY_PAGES command version we used one command to get the required amount of boot, init and post init pages. The new version uses the op_mod field to specify whether the query is for the required amount of boot, init or post init pages. In addition the output field size for the required amount of pages increased from 16 to 32 bits. In MANAGE_PAGES command the input_num_entries and output_num_entries fields sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10. In the pages request event the num_pages field also changed to 32 bits. In the HCA-capabilities-layout the size and location of max_qp_mcg field has been changed to support 24 bits. This patch isn't compatible with firmware versions < 5; however, it turns out that the first GA firmware we will publish will not support previous versions so this should be OK. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05mlx5: remove health handler pluginEli Cohen1-28/+1
Remove this code, per Dave Miller's request, since it is not being used anywhere in the kernel. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge tag 'rdma-for-linus' of ↵Linus Torvalds3-14/+83
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - Fixes for the newly merged mlx5 hardware driver - Stack info leak fixes from Dan Carpenter - Fixes for pkey table handling with SR-IOV - A few other small things * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix pkey change flow for virtualization environments IPoIB: Make sure child devices use valid/proper pkeys IB/core: Create QP1 using the pkey index which contains the default pkey mlx5_core: Variable may be used uninitialized mlx5_core: Implement new initialization sequence mlx5_core: Fix use after free in mlx5_cmd_comp_handler() IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext() IB/mlx5: Fix error return code in init_one() IB/mlx4: Use default pkey when creating tunnel QPs RDMA/cma: Only call cma_save_ib_info() for CM REQs RDMA/cma: Fix accessing invalid private data for UD RDMA/cma: Fix gcc warning Revert "RDMA/nes: Fix compilation error when nes_debug is enabled" IB/qib: Add err_decode() call for ring dump RDMA/cxgb3: Fix stack info leak in iwch_create_cq() RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq() RDMA/ocrdma: Fix several stack info leaks RDMA/cxgb4: Fix stack info leak in c4iw_create_qp() RDMA/ocrdma: Remove unused include
2013-07-31mlx5_core: Implement new initialization sequenceEli Cohen3-14/+83
Introduce enbale_hca and disable_hca commands to signify when the driver starts or ceases to operate on the device. In addition the driver will use boot and init pages count; boot pages is required to allow firmware to complete boot commands and the other to complete init hca. Command interface revision is bumped to 4 to enforce using supported firmware. This patch breaks compatibility with old versions of firmware (< 4); however, the first GA firmware we will publish will support version 4 so this should not be a problem. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31mlx5_core: Fix use after free in mlx5_cmd_comp_handler()Dan Carpenter1-4/+7
We can't dereference "ent" after passing it to free_cmd(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30mlx5: fix error return code in mlx5_alloc_uuars()Wei Yongjun1-0/+1
Fix to return -ENOMEM from the ioremap error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24mlx5: use after free in mlx5_cmd_comp_handler()Dan Carpenter1-4/+7
We can't dereference "ent" after passing it to free_cmd(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16mlx5 core: Fix __udivdi3 when compiling for 32 bit archesTim Gardner1-1/+1
Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11mlx5: Return -EFAULT instead of -EPERMDan Carpenter2-13/+9
For copy_to/from_user() failure, the correct error code is -EFAULT not -EPERM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB specMoshe Lazer1-1/+1
Sparse reported an endianness bug in the assignment to hca_cap.uar_page_sz. Fix the declaration of this field to be __be16 (which is what is in the firmware spec), renaming the field to log_uar_pg_size to conform to the spec, which fixes the endianness bug reported by sparse. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08mlx5_core: Fixes for sparse warningsRoland Dreier2-11/+21
- use be32_to_cpu() instead of cpu_to_be32() where appropriate. - use proper accessors for pointers marked __iomem. Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08mlx5: Add driver for Mellanox Connect-IB adaptersEli Cohen20-0/+5765
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 18:03:18 +0000