Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vhca_event.h has been included at line 4, so remove the
duplicate one at line 8.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
indir_table.h has been included at line 41, so remove
the duplicate one at line 43.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.
When ecpu bit is used, firmware returns a syndrome.
mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22
Hence, avoid using ecpu bit.
Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to
determine if HTB and/or PTP offloads are active. If they are, it
calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from
selecting HTB and PTP queues for regular traffic. However, before the
channels are first activated, num_tc_x_num_ch is zero. If
ndo_select_queue gets called at this point, the HTB/PTP check will pass,
and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch,
which equals to zero.
This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero
value before registering the netdev.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expose error value when failing to comply to command:
$ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off]
Fixes: be7e87f92b58 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Setting connection tracking OVS flows and then setting non-CT flows that
use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not
being offloaded.
Fix by using a stricter condition in modify_header_match_supported() to
check tuple rewrite support only for flows with CT action. The check is
factored out into standalone modify_tuple_supported() function to aid
readability.
Fixes: 7e36feeb0467 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, we support hardware offload only for MPLS over UDP.
However, rules matching on MPLS parameters are now wrongly offloaded
for regular MPLS, without actually taking the parameters into
consideration when doing the offload.
Fix it by rejecting such unsupported rules.
Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The multicast counter got removed from uplink representor due to the
cited patch.
Fixes: 47c97e6b10a1 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We re-use the native NIC port net device instance for the Uplink
representor, a driver currently cannot unbind TC setup callback
actively, hence protect changing E-Switch mode while adding rules.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
E-Switch mode change routine will take the write lock to prevent any
consumer to access the E-Switch resources while E-Switch is going
through a mode change.
In the next patch
E-Switch consumers (e.g vport representors) will take read_lock prior to
accessing E-Switch resources to prevent E-Switch mode changing in the
middle of the operation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When switching modes between legacy and switchdev and back, do not
reload ethernet interfaces. just change the profile from nic profile
to uplink rep profile in switchdev mode.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When we clean all the interfaces, i.e. rescan or reload module,
we need to clean eth-reps devices first, before eth devices.
We will re-use the native NIC port net device instance for the Uplink
representor. Changing eswitch mode will skip destroying the eth device
so the net device won't be destroyed and only change the profile.
Creating uplink eth-rep will initialize the representor related resources.
In that sense when we destroy all devices we first need to destroy
eth-rep devices so uplink eth-rep will clean all representor related
resources and only then destroy the eth device which will destroy rest
of the resources and the net device.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We re-use the native NIC port net device instance for the Uplink
representor, and the devlink port.
When changing profiles we reset the mlx5e priv but we should still
use the devlink port so move it to mlx5e resources.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This is to separate between resources attributes and other
attributes we will want to use.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor. Since the netdev will be kept registered while we engage
switchdev mode also the devlink will be kept registered.
Register the nic devlink port with switch id so it will be available
when changing profiles.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor. As such we also don't want to unregister/register the
devlink port as part of the profile.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor. While changing profiles private resources are not
available but some ndos are not checking if the netdev is present.
So for those ndos check the netdev is present in the driver before
accessing the private resources.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove dedicated uplink rep netdev ndos and ethtools ops.
We will re-use the native NIC port net device instance and ethtool ops for
the Uplink representor.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor, hence same ndos must be used.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor, hence same ndos will be used.
Now we need to distinguish in the TC callback if the mode is legacy or
switchdev and set the proper flag.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We will re-use the native NIC port net device instance for the Uplink
representor. Several VF ndo ops are not relevant in switchdev mode.
Disallow them when eswitch mode is not legacy as a preparation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In downstream patches NIC netdev can change profile dynamically from
NIC mode to uplink mode and vise-versa. It is required that both profiles
must advertise the same max amount of tx/rx queues.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
|
|
drivers
A follow-up patch will allow users to configures packet-per-second policing
in the software datapath. In preparation for this, teach all drivers that
support offload of the policer action to reject such configuration as
currently none of them support it.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support matching on ICMPv4/6 type and code parameters using misc3
section of match parameters.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for mirroring before the CT action by spliting the pre ct rule.
Mirror outputs are done first on the tc chain,prio table rule (the fwd
rule), which will then forward to a per port fwd table.
On this fwd table, we insert the original pre ct rule that forwards to
ct/ct nat table.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Multiple commands can be printed at the same time which can
lead to wrong order of their lines in dmesg output.
As a result, it's hard to match data dumps to the correct command
or which command was fully dumped at some point.
Fix this by displaying the corresponding command index, and also
indicate when a command was fully dumped.
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Increasing the size of the indirection_rqt array from 128 to 256 bytes
pushed the stack usage of the mlx5e_hairpin_fill_rqt_rqns() function
over the warning limit when building with clang and CONFIG_KASAN:
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:970:1: error: stack frame size of 1180 bytes in function 'mlx5e_tc_add_nic_flow' [-Werror,-Wframe-larger-than=]
Using dynamic allocation here is safe because the caller does the
same, and it reduces the stack usage of the function to just a few
bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Dump the ICOSQ's WQE descriptor when a completion with error is received.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Commit e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small
L1_CACHE_BYTES") switched to using net_prefetchw at all places in mlx5e.
In the same time frame, commit 5af75c747e2a ("net/mlx5e: Enhanced TX
MPWQE for SKBs") added one more usage of prefetchw. When these two
changes were merged, this new occurrence of prefetchw wasn't replaced
with net_prefetchw.
This commit fixes this last occurrence of prefetchw in
mlx5e_tx_mpwqe_session_start, making the same change that was done in
mlx5e_xdp_mpwqe_session_start.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix the following coccicheck warnings:
drivers/net/ethernet/mellanox/mlx5/core/devlink.c:145:29-66: WARNING
avoid newline at end of message in NL_SET_ERR_MSG_MOD
drivers/net/ethernet/mellanox/mlx5/core/devlink.c:140:29-77: WARNING
avoid newline at end of message in NL_SET_ERR_MSG_MOD
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Read congestion counters from all ports in any lag mode rather than
only in RoCE lag mode (e.g., VF lag).
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix the following coccicheck warnings:
./drivers/net/ethernet/mellanox/mlx5/core/sf/devlink.c:495:2-3: Unneeded
semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
It is allocated with kvzalloc(), the corresponding release function
should not be kfree(), use kvfree() instead.
Generated by: scripts/coccinelle/api/kfree_mismatch.cocci
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The field source_eswitch_owner_vhca_id was not consumed
in the same way as in STEv0. Added the missing set.
Fixes: 10b694186410 ("net/mlx5: DR, Add HW STEv1 match logic")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove the dr_ste_v1_set_rx_decap_l3 function that was
replaced by another function - fixing a rebase error.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
"reforamt" -> "reformat"
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
flow spec is not small and we do allocate it using kvzalloc
in most places of the driver. fix rest of the places
to use kvzalloc to avoid failure in allocation when
memory is too fragmented.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
fs_get_obj retrieves the container of fs_parent_node just to pass the
same value as &fs_ns->node. Just pass fs_parent_node to
init_root_tree_recursive() to get exactly the same effect.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There is no point of calculating reg_c1 or overriding reg_c0 if we are
going to abort the function.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
|
|
Fix the following coccicheck warnings:
drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.h:50:8-9: WARNING:
return of 0/1 in function 'mlx5_sf_dev_allocated' with return type bool
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5_tc_ct_init() either returns a valid pointer or a NULL, either way
the caller can continue, remove IS_ERR check from callers as it has no
effect.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Some of the stubs for CONFIG_MLX5_CLS_ACT==disabled are missing "static
inline" in their definition which causes the following compilation
warnings:
In file included from drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:41:
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:34:1: warning: no previous prototype for function 'mlx5_esw_indir_table_init' [-Wmissing-prototypes]
mlx5_esw_indir_table_init(void)
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:33:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct mlx5_esw_indir_table *
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:40:1: warning: no previous prototype for function 'mlx5_esw_indir_table_destroy' [-Wmissing-prototypes]
mlx5_esw_indir_table_destroy(struct mlx5_esw_indir_table *indir)
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:39:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:61:1: warning: no previous prototype for function 'mlx5_esw_indir_table_needed' [-Wmissing-prototypes]
mlx5_esw_indir_table_needed(struct mlx5_eswitch *esw,
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:60:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool
^
static
3 warnings generated.
Add "static inline" prefix to signatures of stubs that were missing it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When CONFIG_IPV6 is disabled the header nexthop.h is not included by
fib_notifier.h which causes tc_tun_encap.c to fail to compile:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:5:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.h:7:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h:7:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en_tc.h:40:
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h:78:5: warning: no previous prototype for function 'mlx5e_tc_tun_update_header_ipv6' [-Wmissing-prototypes]
int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv,
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h:78:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv,
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:12: error: implicit declaration of function 'fib_info_nh' [-Werror,-Wimplicit-function-declaration]
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:12: note: did you mean 'fib_info_put'?
include/net/ip_fib.h:528:20: note: 'fib_info_put' declared here
static inline void fib_info_put(struct fib_info *fi)
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:42: error: member reference type 'int' is not a pointer
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
include/net/ip_fib.h:113:21: note: expanded from macro 'fib_nh_dev'
#define fib_nh_dev nh_common.nhc_dev
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:13: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/kernel.h:694:51: note: expanded from macro 'container_of'
BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
include/linux/compiler_types.h:256:74: note: expanded from macro '__same_type'
#define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
^
include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
include/linux/compiler_types.h:320:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:308:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:300:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:13: error: offsetof of incomplete type 'struct fib6_entry_notifier_info'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^ ~~~~~~
include/linux/kernel.h:697:21: note: expanded from macro 'container_of'
((type *)(__mptr - offsetof(type, member))); })
^ ~~~~
include/linux/stddef.h:17:32: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) __compiler_offsetof(TYPE, MEMBER)
^ ~~~~
include/linux/compiler_types.h:140:35: note: expanded from macro '__compiler_offsetof'
#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
^ ~
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:11: error: assigning to 'struct fib6_entry_notifier_info *' from incompatible type 'void'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1553:12: error: implicit declaration of function 'fib6_info_nh_dev' [-Werror,-Wimplicit-function-declaration]
fib_dev = fib6_info_nh_dev(fen_info->rt);
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1553:37: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fib_dev = fib6_info_nh_dev(fen_info->rt);
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1555:14: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fen_info->rt->fib6_dst.plen != 128)
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1562:39: error: incomplete definition of type 'struct fib6_entry_notifier_info'
memcpy(&key.endpoint_ip.v6, &fen_info->rt->fib6_dst.addr,
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1563:24: error: incomplete definition of type 'struct fib6_entry_notifier_info'
sizeof(fen_info->rt->fib6_dst.addr));
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
1 warning and 10 errors generated.
Manually include net/nexthop.h in tc_tun_encap.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The alternative implementation of this function in a header file
is declared as a global symbol, and gets added to every .c file
that includes it, which leads to a link error:
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/en_rx.o: in function `mlx5e_tc_tun_update_header_ipv6':
en_rx.c:(.text+0x0): multiple definition of `mlx5e_tc_tun_update_header_ipv6'; drivers/net/ethernet/mellanox/mlx5/core/en_main.o:en_main.c:(.text+0x0): first defined here
Mark it 'static inline' like the other functions here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To avoid false lock dependency warning set the ct_entries_ht lock
class different than the lock class of the ht being used when deleting
last flow from a group and then deleting a group, we get into del_sw_flow_group()
which call rhashtable_destroy on fg->ftes_hash which will take ht->mutex but
it's different than the ht->mutex here.
======================================================
WARNING: possible circular locking dependency detected
5.10.0-rc2+ #8 Tainted: G O
------------------------------------------------------
revalidator23/24009 is trying to acquire lock:
ffff888128d83828 (&node->lock){++++}-{3:3}, at: mlx5_del_flow_rules+0x83/0x7a0 [mlx5_core]
but task is already holding lock:
ffff8881081ef518 (&ht->mutex){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x37/0x720
which lock already depends on the new lock.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
MLX5_INTERFACE_STATE_UP is far from being reliable check for success to
recover, because it can be changed any time and health logic doesn't
have any locks to protect from it.
The locks are not needed here because health recover is good to have,
but not must to success, so rely on the returned value from the
mlx5_recover_device() as a marker for success/failure.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The check of MLX5_INTERFACE_STATE_UP is completely useless, because
the FW tracer cleanup is called on every change of the interface
and it ensures that notifier is disabled together with canceling
all the pending works.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The FW tracer check is called twice, so delete one of them.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mix between probe/unprobe and reload flows causes to have an extra
mutex lock intf_state_mutex that generates LOCKDEP warning between it
and devlink_mutex. As a preparation for the future removal, separate
those flows.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|