summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx4/main.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-02net/mlx4_core: Check the correct limitation on VFs for HA modeMoni Shoua1-3/+11
The limit of 63 is only for virtual functions while the actual enforcement was for VFs plus physical functions, fix that. Fixes: e57968a10bc1 ('net/mlx4_core: Support the HA mode for SRIOV VFs too') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_core: Set UAR page size to 4KB regardless of system page sizeHuy Nguyen1-11/+45
problem description: The current code sets UAR page size equal to system page size. The ConnectX-3 and ConnectX-3 Pro HWs require minimum 128 UAR pages. The mlx4 kernel drivers are not loaded if there is less than 128 UAR pages. solution: Always set UAR page to 4KB. This allows more UAR pages if the OS has PAGE_SIZE larger than 4KB. For example, PowerPC kernel use 64KB system page size, with 4MB uar region, there are 4MB/2/64KB = 32 uars (half for uar, half for blueflame). This does not meet minimum 128 UAR pages requirement. With 4KB UAR page, there are 4MB/2/4KB = 512 uars which meet the minimum requirement. Note that only codes in mlx4_core that deal with firmware know that uar page size is 4KB. Codes that deal with usr page in cq and qp context (mlx4_ib, mlx4_en and part of mlx4_core) still have the same assumption that uar page size equals to system page size. Note that with this implementation, on 64KB system page size kernel, there are 16 uars per system page but only one uars is used. The other 15 uars are ignored because of the above assumption. Regarding SR-IOV, mlx4_core in hypervisor will set the uar page size to 4KB and mlx4_core code in virtual OS will obtain the uar page size from firmware. Regarding backward compatibility in SR-IOV, if hypervisor has this new code, the virtual OS must be updated. If hypervisor has old code, and the virtual OS has this new code, the new code will be backward compatible with the old code. If the uar size is big enough, this new code in VF continues to work with 64 KB uar page size (on PowerPc kernel). If the uar size does not meet 128 uars requirement, this new code not loaded in VF and print the same error message as the old code in Hypervisor. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06net/mlx4_core: Support the HA mode for SRIOV VFs tooMoni Shoua1-10/+97
When the mlx4 driver runs in HA mode, and all VFs are single ported ones, we make their single port Highly-Available. This is done by taking advantage of the HA mode properties (following bonding changes with programming the port V2P map, etc) and adding the missing parts which are unique to SRIOV such as mirroring VF steering rules on both ports. Due to limits on the MAC and VLAN table this mode is enabled only when number of total VFs is under 64. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net/mlx4_core: Avoid returning success in case of an error flowNoa Osherovich1-3/+5
The err variable wasn't set with the correct error value in some cases. Fixes: 47605df95398 ('mlx4: Modify proxy/tunnel QP mechanism [..]') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+2
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14net/mlx4_core: Replace VF zero mac with random mac in mlx4_coreJack Morgenstein1-0/+2
By design, when no default MAC addresses are set in the Hypervisor for VFs, the VFs are passed zero-macs. When such a MAC is received by the VF, it generates a random MAC address and registers that MAC address with the Hypervisor. This random mac generation is currently done in the mlx4_en module. There is a problem, though, if the mlx4_ib module is loaded by a VF before the mlx4_en module. In this case, for RoCE, mlx4_ib will see the un-replaced zero-mac and register that zero-mac as part of QP1 initialization. Having a zero-mac in the port's MAC table creates problems for a Baseboard Management Console. The BMC occasionally sends packets with a zero-mac destination MAC. If there is a zero-mac present in the port's MAC table, the FW will send such BMC packets to the host driver rather than to the wire, and BMC will stop working. To address this problem, we move the replacement of zero-mac addresses with random-mac addresses to procedure mlx4_slave_cap(), which is part of the driver startup for VFs, and is before activation of mlx4_ib and mlx4_en. As a result, zero-mac addresses will never be registered in the port MAC table by the driver. In addition, when mlx4_en does initialize the net device, it needs to set the NET_ADDR_RANDOM flag in the netdev structure if the address was randomly generated. This is done so that udev on the VM does not create a new device name after each VF probe (VM boot and such). To accomplish this, we add a per-port flag in mlx4_dev which gets set whenever mlx4_core replaces a zero-mac with a randomly-generated mac. This flag is examined when mlx4_en initializes the net-device. Fix was suggested by Matan Barak <matanb@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net/mlx4: Remove shared_ports variable at mlx4_enable_msi_xCarol L Soto1-8/+2
If we get MAX_MSIX interrupts would like to have each receive ring with his own msix interrupt line. Do not need the shared_ports variable at mlx4_enable_msix Fixes: 9293267a3e2a ('net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net/mlx4_core: Capping number of requested MSIXs to MAX_MSIXCarol L Soto1-1/+9
We currently manage IRQs in pool_bm which is a bit field of MAX_MSIX bits. Thus, allocating more than MAX_MSIX interrupts can't be managed in pool_bm. Fixing this by capping number of requested MSIXs to MAX_MSIX. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+5
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx4_core: Preparations for 802.1ad VLAN supportHadar Hen Zion1-0/+15
mlx4_core preparation to support hardware accelerated 802.1ad VLAN device. To allow 802.1ad accelerated device, "packet has vlan" (phv) Firmware capability should be available. Firmware without the phv capability won't behave properly and can't support 802.1ad device acceleration. The driver checks the Firmware capability and sets the phv bit accordingly in SET_PORT command. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26net/mlx4_core: Use sink counter for the VF default as fallbackOr Gerlitz1-0/+5
Some old PF drivers don't let VFs allocate counters, in that case, use the sink counter so the VF can load and operate properly. Fixes: 6de5f7f6a1fa ('net/mlx4_core: Allocate default counter per port') Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net/mlx4_core: Add extra check for total vfs for SRIOVCarol Soto1-6/+14
Add extra check for total vfs for SRIOV to check if that value is bigger than total vfs in pci SRIOV capabalities. Fix a check and print of the number of maximum vfs that hw can handle. Fix a check and print of the number of maximum vfs per port that driver can handle. Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-44/+222
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+8
Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Allocate default counter per portEran Ben Elisha1-3/+68
Default counter per port will be allocated at the mlx4 core driver load. Every QP opened by the Ethernet driver will be attached to the port's default counter. This is an infrastructure step to collect VF statistics from the PF. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Remove counters table allocation from VF flowEran Ben Elisha1-7/+18
Since virtual functions get their counters indices allocation from the PF, allocate counters indices bitmap only in case the function isn't virtual. Also, check that the device has counters to allocate before creating the indices bitmap table. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Add sink counterEran Ben Elisha1-4/+7
Reserve the last valid counter index for "sink" counter, when a new counter cannot be allocated, the driver will use this counter. In order to avoid allocating this counter on any other flow, fix the indices bitmap allocation range, and reserve the sink counter index. Add macro for the sink counter index and replace all appearences of the index with the macro. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Reset counters data when freedEran Ben Elisha1-0/+21
Add resetting the counter data to the free counter flow, so the counter's data won't be accessible anymore if querying the counter. Also, on next counter allocation (to another VM for example), it will be fresh and clear. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Check before cleaning counters bitmapEran Ben Elisha1-0/+6
If counters are not supported by the device. The indices bitmap table is not allocated during initialization. Add the symmetrical check before cleaning the counters bitmap table or freeing a counter. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Disable Granular QoS per VF under IB/Eth VPI configurationOr Gerlitz1-0/+8
Due to firmware bug, under VPI configuration when port1 = IB and port2 = Eth, Granular QoS per VF isn't working properly. More over, the whole QP0/QP1 Para-Virtualization in the mlx4 IB driver is broken on that config. Hence, we must disable Granular QoS per VF under that configuration till a fix is introduced. Once that happens, a new device capability will be used to mark the feature support on that specific configuration. Reported-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12IB/mlx4: Add mmap call to map the hardware clockMatan Barak1-0/+19
In order to read the HCA's cycle counter efficiently in user space, we need to map the HCA's register. This is done through mmap call. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-03net/mlx4_core: need to call close fw if alloc icm is called twiceCarol Soto1-0/+1
If mlx4_enable_sriov is called by adapter without this feature MLX4_DEV_CAP_FLAG2_SYS_EQS then during this path the function alloc icm is called twice without freeing the structures from the first time. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net/mlx4_core: double free of dev_vfsCarol L Soto1-0/+1
If user loads mlx4_core with num_vfs greater than supported then variable dev->dev_vfs is freed 2 times after unloading the driver. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx4_core: Move affinity hints to mlx4_core ownershipIdo Shamay1-0/+36
Now that EQs management is in the sole responsibility of mlx4_core, the IRQ affinity hints configuration should be in its hands as well. request_irq is called only once by the first consumer (maybe mlx4_ib), so mlx4_en passes the affinity mask too late. We also need to request vectors according to the cores we want to run on. mlx4_core distribution of IRQs to cores is straight forward, EQ(i)->IRQ will set affinity hint to core i. Consumers need to request EQ vectors, according to their cores considerations (NUMA). Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx4: Add EQ poolMatan Barak1-18/+56
Previously, mlx4_en allocated EQs and used them exclusively. This affected RoCE performance, as applications which are events sensitive were limited to use only the legacy EQs. Change that by introducing an EQ pool. This pool is managed by mlx4_core. EQs are assigned to ports (when there are limited number of EQs, multiple ports could be assigned to the same EQs). An exception to this rule is the ASYNC EQ which handles various events. Legacy EQs are completely removed as all EQs could be shared. When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for EQ serving on a specific port. The core driver calculates which EQ should be assigned to that request. Because IRQs are shared between IB and Ethernet modules, their names only include the PCI device BDF address. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-24net/mlx4_core: Enable single ported IB VFsOr Gerlitz1-12/+0
Remove the limitation that disallows configuring single ported VFs in the presence of IB ports, after addressing the issues that prevented that to work. SMI (QP0) requests/responses are still not supported for single ported IB VFs. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15net/mlx4_core: Set initial admin GUIDs for VFsYishai Hadas1-0/+15
To have out of the box experience, the PF generates random GUIDs who serve as the initial admin values. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15net/mlx4_core: Manage alias GUID per VFYishai Hadas1-0/+16
Manages alias GUIDs per VF per port in the core layer. This is a pre-step for managing alias GUIDs in a mode that the admin GUID is returned via ib_query_gid() regardless of whether the SM has approved it or not. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-02net/mlx4_en: Add RX-ALL supportMuhammad Mahajna1-0/+21
Enabled when the device supports KEEP FCS and IGNORE FCS. When the flag is set, pass all received frames up the stack, even ones with invalid FCS, controlled by ethtool. Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Warn users of depracated QoS FirmwareIdo Shamay1-0/+8
A new capability bit was introduced in the past to to differ devices using the QoS ETS feature. The old was deprecated since then. If driver sees device which set only the old capabilty, it will print warning to user suggesting to upgrade the FW. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add RSS support for fragmented IP datagramsIdo Shamay1-0/+2
Enable RSS support for fragmented IP packets, when device supports it. Until now, fragmented IP packets were directed only to the default_qpn. Since IP fragments (datagram) have no upper protocols (L3 IP packets), hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW makes sure that this holds for the 1st fragment too, so all fragments go to the same QP. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_core: Add basic support for QP max-rate limitingOr Gerlitz1-0/+2
Add the low-level device commands and definitions used for QP max-rate limiting. This is done through the following elements: - read rate-limit device caps in QUERY_DEV_CAP: number of different rates and the min/max rates in Kbs/Mbs/Gbs units - enhance the QP context struct to contain rate limit units and value - allow to do run time rate-limit setting to QPs through the update-qp firmware command - QP rate-limiting is disallowed for VFs Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net/mlx4_core: Fix misleading debug print on CQE stride supportOr Gerlitz1-1/+2
We do support cache line sizes of 32 and 64 bytes without activating the CQE stride feature. Fix a misleading print saying that these cache line sizes aren't supported. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net/mlx4_core: Port aggregation upper layer interfaceMoni Shoua1-0/+89
Supply interface functions to bond and unbond ports of a mlx4 internal interfaces. Example for such an interface is the one registered by the mlx4 IB driver under RoCE. There are 1. Functions to go in/out to/from bonded mode 2. Function to remap virtual ports to physical ports The bond_mutex prevents simultaneous access to data that keep status of the device in bonded mode. The upper mlx4 interface marks to the mlx4 core module that they want to be subject for such bonding by setting the MLX4_INTFF_BONDING flag. Interface which goes to/from bonded mode is re-created. The mlx4 Ethernet driver does not set this flag when registering the interface, the IB driver does. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net/mlx4_core: Fix mem leak in SRIOV mlx4_init_one error flowJack Morgenstein1-1/+3
Structs allocated for the resource tracker must be freed in the error flow. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net/mlx4_core: Add reserved lkey for VFs to QUERY_FUNC_CAPJack Morgenstein1-0/+1
The reserved lKey is different for each VF. A base lkey value is returned in QUERY_DEV_CAP at offset 0x98. The reserved L_key value for a VF is: VF_lkey = base_lkey + (VF_number << 8). This VF L_key value should be returned in QUERY_FUNC_CAP (opcode-modifier = 0) at offset 0x48. To indicate that the lkey value at offset 0x48 is valid, the Hypervisor sets a flag bit in dword 0x0, offset 27 in the QUERY_FUNC_CAP wrapper function. When the VF calls QUERY_FUNC_CAP, it should check if this flag bit is set. If it is set, the VF should take the reserved lkey value at offset 0x48. If the bit is not set, the VF should not use a reserved lkey (i.e., should set its reserved lkey value to 0). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Reset flow activation upon SRIOV fatal command casesYishai Hadas1-7/+9
When SRIOV commands are executed over the comm-channel and get a fatal error (e.g. timeout, closing command failure) the VF enters into error state and reset flow is activated. To be able to recognize whether the failure was on a closing command, the operational code for the given VHCR command is used. Once the device entered into an error state we prevent redundant error messages from being printed. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Enable device recovery flow with SRIOVYishai Hadas1-27/+108
In SRIOV, both the PF and the VF may attempt device recovery whenever they assume that the device is not functioning. When the PF driver resets the device, the VF should detect this and attempt to reinitialize itself. The VF must be able to reset itself under all circumstances, even if the PF is not responsive. The VF shall reset itself in the following cases: 1. Commands are not processed within reasonable time over the communication channel. This is done considering device state and the correct return code based on the command as was done in the native mode, done in the next patch. 2. The VF driver receives an internal error event reported by the PF on the communication channel. This occurs when the PF driver resets the device or when VF is out of sync with the PF. Add 'VF reset' capability, which allows the VF to reinitialize itself even when the PF is not responsive. As PF and VF may run their reset flow simulantanisly, there are several cases that are handled: - Prevent freeing VF resources upon FLR, when PF is in its unloading stage. - Prevent PF getting VF commands before it has finished initializing its resources. - Upon VF startup, check that comm-channel is online before sending commands to the PF and getting timed-out. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Handle AER flow properlyYishai Hadas1-6/+65
Fix AER callbacks to work properly, it includes: - Refractoring AER to be aligned with Reset flow support. - Sync with concurrent catas flow. In addition, fix the shutdown PCI callback to sync with concurrent catas flow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Manage interface state for Reset flow casesYishai Hadas1-1/+12
We need to manage interface state to sync between reset flow and some other relative cases such as remove_one. This has to be done to prevent certain races. For example in case software stack is down as a result of unload call, the remove_one should skip the unload phase. Implement the remove_one case, handling AER and other cases comes next. The interface can be up/down, upon remove_one, the state will include an extra bit indicating that the device is cleaned-up, forcing other tasks to finish before the final cleanup. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Enhance the catas flow to support device resetYishai Hadas1-0/+6
This includes: - resetting the chip when a fatal error is detected (the current code does not do this). - exposing the ability to enter error state from outside the catas code by calling its functionality. (E.g. FW Command timeout, AER error). - managing a persistent device state. This is needed to sync between reset flow cases. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Refactor the catas flow to work per deviceYishai Hadas1-2/+10
Using a WQ per device instead of a single global WQ, this allows independent reset handling per device even when SRIOV is used. This comes as a pre-patch for supporting chip reset for both native and SRIOV. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Set device configuration data to be persistent across resetYishai Hadas1-2/+43
When an HCA enters an internal error state, this is detected by the driver. The driver then should reset the HCA and restart the software stack. Keep ports information and some SRIOV configuration in a persistent area to have it valid across reset. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Maintain a persistent memory for mlx4 deviceYishai Hadas1-40/+66
Maintain a persistent memory that should survive reset flow/PCI error. This comes as a preparation for coming series to support above flows. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15net/mlx4: Don't disable vxlan offloads under DMFS-A0 optimized steeringOr Gerlitz1-2/+1
Except for VXLAN steering rules, all offloads should work as they were under plain DMFS mode. Fix that by enabling all the offloads under DMFS-A0 mode, except for VXLAN steering rules. Fixes: d57febe1a478 "net/mlx4: Add A0 hybrid steering" Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/mlx4_core: Fix error flow in mlx4_init_hca()Jack Morgenstein1-9/+4
We shouldn't call UNMAP_FA here, this is done in mlx4_load_one. If mlx4_query_func fails, we need to invoke CLOSE_HCA for both native and master. Fixes: a0eacca948d2 ('net/mlx4_core: Refactor mlx4_load_one') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.19: - On-demand paging support in core midlayer and mlx5 driver. This lets userspace create non-pinned memory regions and have the adapter HW trigger page faults. - iSER and IPoIB updates and fixes. - Low-level HW driver updates for cxgb4, mlx4 and ocrdma. - Other miscellaneous fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits) IB/mlx5: Implement on demand paging by adding support for MMU notifiers IB/mlx5: Add support for RDMA read/write responder page faults IB/mlx5: Handle page faults IB/mlx5: Page faults handling infrastructure IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation IB/mlx5: Changes in memory region creation to support on-demand paging IB/mlx5: Implement the ODP capability query verb mlx5_core: Add support for page faults events and low level handling mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag IB/srp: Allow newline separator for connection string IB/core: Implement support for MMU notifiers regarding on demand paging regions IB/core: Add support for on demand paging regions IB/core: Add flags for on demand paging support IB/core: Add support for extended query device caps IB/mlx5: Add function to read WQE from user-space IB/core: Add umem function to read data from user-space IB/core: Replace ib_umem's offset field with a full address IB/mlx5: Enhance UMR support to allow partial page table update IB/mlx5: Remove per-MR pas and dma pointers RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs ...
2014-12-15mlx4_core: Check for DPDP violation only when DPDP is not supportedYuval Shaia1-3/+3
Move check for DPDP out of the loop to make the code more readable. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15net/mlx4_core: Avoid double dumping of the PF device capabilitiesOr Gerlitz1-0/+1
To support asymmetric EQ allocations, we should query the device capabilities prior to enabling SRIOV. As a side effect of adding that, we are dumping the PF device capabilities twice. Avoid that by moving the printing into a helper function which is called once. Fixes: 7ae0e400cd93 ('net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>