summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: mvneta: fix error message when MTU too large for XDPMarek Behún1-1/+1
The error message says that "Jumbo frames are not supported on XDP", but the code checks for mtu > MVNETA_MAX_RX_BUF_SIZE, not mtu > 1500. Fix this error message. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20210105172333.21613-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28net: mvpp2: fix pkt coalescing int-threshold configurationStefan Chulski1-5/+6
The packet coalescing interrupt threshold has separated registers for different aggregated/cpu (sw-thread). The required value should be loaded for every thread but not only for 1 current cpu. Fixes: 213f428f5056 ("net: mvpp2: add support for TX interrupts and RX queue distribution modes") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608748521-11033-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu1-1/+1
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21net: mvpp2: Fix GoP port 3 Networking Complex Control configurationsStefan Chulski1-1/+1
During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: prs: fix PPPoE with ipv6 packet parseStefan Chulski1-2/+3
Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <lironh@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: Add TCAM entry to drop flow control pause framesStefan Chulski2-1/+34
Issue: Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC. Fix: According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01. Add TCAM parser entry to track and drop pause frames by destination MAC. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: disable force link UP during port init procedureStefan Chulski1-1/+13
Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17octeontx2-af: Fix undetected unmap PF error checkColin Ian King1-1/+2
Currently the check for an unmap PF error is always going to be false because intr_val is a 32 bit int and is being bit-mask checked against 1ULL << 32. Fix this by making intr_val a u64 to match the type at it is copied from, namely npa_event_context->npa_af_rvu_ge. Addresses-Coverity: ("Operands don't affect result") Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink health reporters for NPAGeorge Cherian3-1/+765
Add health reporters for RVU NPA block. NPA Health reporters handle following HW event groups - GENERAL events - ERROR events - RAS events - RVU event Output: #devlink health pci/0002:01:00.0: reporter hw_npa_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true #devlink health dump show pci/0002:01:00.0 reporter hw_npa_err NPA_AF_ERR: NPA Error Interrupt Reg : 4096 AQ Doorbell Error #devlink health dump show pci/0002:01:00.0 reporter hw_npa_ras NPA_AF_RVU_RAS: NPA RAS Interrupt Reg : 0 Each reporter dump shows the Register value and the description of the cause. Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink suppoort to af driverGeorge Cherian6-2/+98
Add devlink support to AF driver. Basic devlink support is added. Currently info_get is the only supported devlink ops. devlink ouptput looks like this # devlink dev pci/0002:01:00.0 # devlink dev info pci/0002:01:00.0: driver octeontx2-af # Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09net: marvell: octeontx2: simplify the otx2_ptp_adjfine()Zheng Yongjun1-6/+1
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: marvell: octeontx2: simplify the return expression of rvu_npa_init()Zheng Yongjun1-6/+2
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: marvell: prestera: simplify the return expression of prestera_port_close()Zheng Yongjun1-6/+1
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05net: marvell: prestera: Fix error return code in prestera_port_create()Zhang Changzhong1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607071782-34006-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-3/+3
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net: mvpp2: Fix error return code in mvpp2_open()Wang Hai1-0/+1
Fix to return negative error code -ENOENT from invalid configuration error handling case instead of 0, as done elsewhere in this function. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02octeontx2-af: debugfs: delete dead codeDan Carpenter1-203/+52
These debugfs never return NULL so all this code will never be run. In the normal case, (and in this case particularly), the debugfs functions are not supposed to be checked for errors so all this error checking code can be safely deleted. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8c6vpapJDYI2eWI@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel2-3/+3
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-24net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stackLorenzo Bianconi1-19/+23
Build skb_shared_info on mvneta_rx_swbm stack and sync it to xdp_buff skb_shared_info area only on the last fragment. Leftover cache miss in mvneta_swbm_rx_frame will be addressed introducing mb bit in xdp_buff/xdp_frame struct Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24net: mvneta: move skb_shared_info in mvneta_xdp_put_buff callerLorenzo Bianconi1-11/+21
Pass skb_shared_info pointer from mvneta_xdp_put_buff caller. This is a preliminary patch to reduce accesses to skb_shared_info area and reduce cache misses. Remove napi parameter in mvneta_xdp_put_buff signature since it is always run in NAPI context Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24net: mvneta: avoid unnecessary xdp_buff initializationLorenzo Bianconi1-4/+5
Explicitly initialize mandatory fields defining xdp_buff struct in mvneta_rx_swbm routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24net: mvpp2: divide fifo for dts-active ports onlyStefan Chulski2-44/+108
Tx/Rx FIFO is a HW resource limited by total size, but shared by all ports of same CP110 and impacting port-performance. Do not divide the FIFO for ports which are not enabled in DTS, so active ports could have more FIFO. No change in FIFO allocation if all 3 ports on the communication processor enabled in DTS. The active port mapping should be done in probe before FIFO-init. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/1606154073-28267-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski1-0/+1
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21octeontx2-af: Add support for RSS hashing based on Transport protocol fieldGeorge Cherian3-1/+10
Add support to choose RSS flow key algorithm with IPv4 transport protocol field included in hashing input data. This will be enabled by default. There-by enabling 3/5 tuple hash Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20201120093906.2873616-1-george.cherian@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-af: Fix access of iter->entry after iter object has been kfree'dColin Ian King1-3/+5
The call to pc_delete_flow can kfree the iter object, so the following dev_err message that accesses iter->entry can accessmemory that has just been kfree'd. Fix this by adding a temporary variable 'entry' that has a copy of iter->entry and also use this when indexing into the array mcam->entry2target_pffunc[]. Also print the unsigned value using the %u format specifier rather than %d. Addresses-Coverity: ("Read from pointer after free") Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201118143803.463297-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-af: Fix return of uninitialized variable errColin Ian King1-1/+1
Currently the variable err may be uninitialized if several of the if statements are not executed in function nix_tx_vtag_decfg and a garbage value in err is returned. Fix this by initialized ret at the start of the function. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201118132502.461098-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-pf: Fix unintentional sign extension issueColin Ian King1-1/+1
The shifting of the u16 result from ntohs(proto) by 16 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the return from ntohs(proto) is set then all then all the upper 32 bits of a 64 bit long end up as also being set because of the sign-extension. Fix this by casting to a u64 long before the shift. Addresses-Coverity: ("Unintended sign extension") Fixes: f0c2982aaf98 ("octeontx2-pf: Add support for SR-IOV management function") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201118130520.460365-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-af: add debugfs entries for CPT blockSrujana Challa2-0/+273
Add entries to debugfs at /sys/kernel/debug/octeontx2/cpt. cpt_pc: dump cpt performance HW registers. Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_pc cpt_ae_sts: show cpt asymmetric engines current state Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_ae_sts cpt_se_sts: show cpt symmetric engines current state Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_se_sts cpt_engines_info: dump cpt engine control registers. Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_engines_info cpt_lfs_info: dump cpt lfs control registers. Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_lfs_info cpt_err_info: dump cpt error registers. Usage: cat /sys/kernel/debug/octeontx2/cpt/cpt_err_info Signed-off-by: Suheil Chandran <schandran@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-af: add mailbox interface for CPTSrujana Challa4-7/+325
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a mailbox interface for CPT PFs and VFs to allocate resources for cryptography. It also adds hardware CPT AF register defines. Signed-off-by: Suheil Chandran <schandran@marvell.com> Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20octeontx2-pf: move lmt flush to include/linux/socSrujana Challa1-12/+1
On OcteonTX2 platform CPT instruction enqueue and NIX packet send are only possible via LMTST operations which uses LDEOR instruction. This patch moves lmt flush function from OcteonTX2 nic driver to include/linux/soc since it will be used by OcteonTX2 CPT and NIC driver for LMTST. Signed-off-by: Suheil Chandran <schandran@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-4/+8
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Delete NIX_RXVLAN_ALLOC mailbox messageSubbaraya Sundeep4-90/+0
Since mailbox message for installing flows is in place, remove the RXVLAN_ALLOC mbox message which is redundant. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Add new mbox messages to retrieve MCAM entriesNaveen Mamindlapalli2-0/+92
This patch introduces new mailbox mesages to retrieve a given MCAM entry or base flow steering rule of a VF installed by its parent PF. This helps while updating the existing MCAM rules with out re-framing the whole mailbox request again. The INSTALL FLOW mailbox consumer can read-modify-write the existing entry. Similarly while installing new flow rules for a VF, the base flow steering rule match creteria is copied to the new flow rule and the deltas are appended to the new rule. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Co-developed-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Handle PF-VF mac address changesHariprasad Kelam4-4/+36
This patch handles the VF mac address changes as given below. 1. mac addr configrued by VF will be retained until VF module unload. 2. mac addr configred by PF for VF will be retained until power cycle. 3. mac addr confgired by PF for its VF can't be overwritten by VF. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-pf: Add support for SR-IOV management functionsNaveen Mamindlapalli9-2/+420
This patch adds support for ndo_set_vf_mac, ndo_set_vf_vlan and ndo_get_vf_config handlers. The traffic redirection based on the VF mac address or vlan id is done by installing MCAM rules. Reserved RX_VTAG_TYPE7 in each NIXLF for VF VLAN which strips the VLAN tag from ingress VLAN traffic. The NIX PF allocates two MCAM entries for VF VLAN feature, one used for ingress VTAG strip and another entry for egress VTAG insertion. This patch also updates the MAC address in PF installed VF VLAN rule upon receiving nix_lf_start_rx mbox request for VF since Administrative Function driver will assign a valid MAC addr in nix_lf_start_rx function. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Co-developed-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-pf: Implement ingress/egress VLAN offloadHariprasad Kelam8-4/+167
This patch implements egress VLAN offload by appending NIX_SEND_EXT_S header to NIX_SEND_HDR_S. The VLAN TCI information is specified in the NIX_SEND_EXT_S. The VLAN offload in the ingress path is implemented by configuring the NIX_RX_VTAG_ACTION_S to strip and capture the outer vlan fields. The NIX PF allocates one MCAM entry for Rx VLAN offload. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entriesVamsi Attunuru3-13/+250
This patch modifies the existing nix_vtag_config mailbox message to allocate and free TX VTAG entries as requested by a NIX PF. The TX VTAG entries are global resource that shared by all PFs and each entry specifies the size of VTAG to insert and the VTAG header data to insert. The mailbox response contains the entry index which is used by mailbox requester in configuring the NPC_TX_VTAG_ACTION for any MCAM entry. Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Add debugfs entry to dump the MCAM rulesSubbaraya Sundeep1-0/+197
Add debugfs support to dump the MCAM rules installed using NPC_INSTALL_FLOW mbox message. Debugfs file can display mcam entry, counter if any, flow type and counter hits. Ethtool will dump the ntuple flows related to the PF only. The debugfs file gives systemwide view of the MCAM rules installed by all the PF's. Below is the example output when the debugfs file is read: ~ # mount -t debugfs none /sys/kernel/debug ~ # cat /sys/kernel/debug/octeontx2/npc/mcam_rules Installed by: PF1 direction: RX mcam entry: 227 udp source port 23 mask 0xffff Forward to: PF1 VF0 action: Direct to queue 0 enabled: yes counter: 1 hits: 0 Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-pf: Add support for unicast MAC address filteringHariprasad Kelam3-7/+143
Add unicast MAC address filtering support using install flow message. Total of 8 MCAM entries are allocated for adding unicast mac filtering rules. If the MCAM allocation fails, the unicast filtering support will not be advertised. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-pf: Add support for ethtool ntuple filtersSubbaraya Sundeep5-5/+707
This patch adds support for adding and deleting ethtool ntuple filters. The filters for ether, ipv4, ipv6, tcp, udp and sctp are supported. The mask is also supported. The supported actions are drop and direct to a queue. Additionally we support FLOW_EXT field vlan_tci and FLOW_MAC_EXT. The NIX PF will allocate total 32 MCAM entries for the use of ethtool ntuple filters. The Administrative Function(AF) will install/delete the MCAM rules when NIX PF sends mailbox message to install/delete the ntuple filters. Ethtool ntuple filters support is restricted to PFs as of now and PF can install ntuple filters to direct the traffic to its VFs. Hence added a separate callback for VFs to get/set RSS configuration. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Add mbox messages to install and delete MCAM rulesSubbaraya Sundeep8-52/+1064
Added new mailbox messages to install and delete MCAM rules. These mailbox messages will be used for adding/deleting ethtool n-tuple filters by NIX PF. The installed MCAM rules are stored in a list that will be traversed later to delete the MCAM entries when the interface is brought down or when PCIe FLR is received. The delete mailbox supports deleting a single MCAM entry or range of entries or all the MCAM entries owned by the pcifunc. Each MCAM entry can be associated with a HW match stat entry if the mailbox requester wants to check the hit count for debugging. Modified adding default unicast DMAC match rule using install flow API. The default unicast DMAC match entry installed by Administrative Function is saved and can be changed later by the mailbox user to fit additional fields, or the default MCAM entry rule action can be used for other flow rules installed later. Modified rvu_mbox_handler_nix_lf_free mailbox to add a flag to disable or delete the MCAM entries. The MCAM entries are disabled when the interface is brought down and deleted in FLR handler. The disabled MCAM entries will be re-enabled when the interface is brought up again. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Generate key field bit mask from KEX profileSubbaraya Sundeep5-3/+658
Key Extraction(KEX) profile decides how the packet metadata such as layer information and selected packet data bytes at each layer are placed in MCAM search key. This patch reads the configured KEX profile parameters to find out the bit position and bit mask for each field. The information is used when programming the MCAM match data by SW to match a packet flow and take appropriate action on the flow. This patch also verifies the mandatory fields such as channel and DMAC are not overwritten by the KEX configuration of other fields. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Verify MCAM entry channel and PF_FUNCSubbaraya Sundeep3-2/+82
This patch adds support to verify the channel number sent by mailbox requester before writing MCAM entry for Ingress packets. Similarly for Egress packets, verifying the PF_FUNC sent by the mailbox user. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Modify default KEX profile to extract TX packet fieldsStanislaw Kardach3-14/+120
The current default Key Extraction(KEX) profile can only use RX packet fields while generating the MCAM search key. The profile can't be used for matching TX packet fields. This patch modifies the default KEX profile to add support for extracting TX packet fields into MCAM search key. Enabled Tx KPU packet parsing by configuring TX PKIND in tx_parse_cfg. Modified the KEX profile to extract 2 bytes of VLAN TCI from an offset of 2 bytes from LB_PTR. The LB_PTR points to the byte offset where the VLAN header starts. The NPC KPU parser profile has been modified to point LB_PTR to the starting byte offset of VLAN header which points to the tpid field. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: mvneta: fix possible memory leak in mvneta_swbm_add_rx_fragmentLorenzo Bianconi1-2/+3
Recycle the page running page_pool_put_full_page() in mvneta_swbm_add_rx_fragment routine when the last descriptor contains just the FCS or if the received packet contains more than MAX_SKB_FRAGS fragments Fixes: ca0e014609f0 ("net: mvneta: move skb build after descriptors processing") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/df6a2bad70323ee58d3901491ada31c1ca2a40b9.1605291228.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-2/+18
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14net: mvpp2: Add xdp tx return bulking supportLorenzo Bianconi1-1/+9
Convert mvpp2 driver to xdp_return_frame_bulk APIs. XDP_REDIRECT (upstream codepath): 1.79Mpps XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Matteo Croce <mcroce@microsoft.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/0b38c295e58e8ce251ef6b4e2187a2f457f9f7a3.1605267335.git.lorenzo@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 07:23:38 +0000