summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/marvell/octeontx2/af
AgeCommit message (Collapse)AuthorFilesLines
2022-08-05octeontx2-af: Fix key checking for source macSubbaraya Sundeep1-1/+2
Given a field with its location/offset in input packet, the key checking logic verifies whether extracting the field can be supported or not based on the mkex profile loaded in hardware. This logic is wrong wrt source mac and this patch fixes that. Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: Fix mcam entry resource leakSubbaraya Sundeep2-0/+12
The teardown sequence in FLR handler returns if no NIX LF is attached to PF/VF because it indicates that graceful shutdown of resources already happened. But there is a chance of all allocated MCAM entries not being freed by PF/VF. Hence free mcam entries even in case of detached LF. Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: suppress external profile loading warningHarman Kalra1-1/+1
The packet parser profile supplied as firmware may not be present all the time and default profile is used mostly. Hence suppress firmware loading warning from kernel due to absence of firmware in kernel image. Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries") Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: Apply tx nibble fixup alwaysStanislaw Kardach1-3/+4
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some silicon revisions. Mistakenly this fixup was only applied to the default MKEX profile while it should also be applied to any loaded profile. Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC") Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15octeontx2-af: Set NIX link credits based on max LMACSunil Goutham7-9/+102
When number of LMACs active on a CGX/RPM are 3, then current NIX link credit config based on per lmac fifo length which inturn is calculated as 'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW one of the LMAC gets half of the FIFO and rest gets 1/4th. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15octeontx2-af: Fixes static warningsRatheesh Kannoth1-11/+38
Fixes smatch static tool warning reported by smatch tool. rvu_npc_hash.c:1232 rvu_npc_exact_del_table_entry_by_id() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1312 rvu_npc_exact_add_table_entry() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1391 rvu_npc_exact_update_table_entry() error: uninitialized symbol 'hash_index'. rvu_npc_hash.c:1428 rvu_npc_exact_promisc_disable() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1473 rvu_npc_exact_promisc_enable() error: uninitialized symbol 'drop_mcam_idx'. otx2_dmac_flt.c:191 otx2_dmacflt_update() error: 'rsp' dereferencing possible ERR_PTR() otx2_dmac_flt.c:60 otx2_dmacflt_add_pfmac() error: 'rsp' dereferencing possible ERR_PTR() Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Limit link bringup time at firmwareHariprasad Kelam4-5/+15
Set the maximum time firmware should poll for a link. If not set firmware could block CPU for a long time resulting in mailbox failures. If link doesn't come up within 1second, firmware will anyway notify the status as and when LINK comes up Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20220712161815.12621-1-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13octeontx2-af: returning uninitialized variableSebin Sebastian1-1/+1
Fix coverity error 'use of uninitialized variable'. err is uninitialized and is returned which can lead to unintended results. err has been replaced with -einval. Coverity issue: 1518921 (uninitialized scalar variable) Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Remove duplicate includeJiapeng Chong1-2/+0
The include is in line 14 and 23. Remove the duplicate. Fix following checkincludes warning: ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: linux/bitfield.h is included more than once. ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: rvu_npc_hash.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Skip CGX/RPM probe incase of zero lmac countHariprasad Kelam5-4/+17
In few error cases MAC(CGX/RPM) block is having 0 lmacs. AF driver uses MAC block with lmac pair to get firmware data etc. These commands will fail as there is no LMAC associated with MAC block. This patch skips the probe of these MAC blocks such that AF driver uses correct MAC block and LMAC pair for firmware communication and define new LMAC_AF_ERROR types for command timeout etc. This patch also enables channel back pressure for all LMACs. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11octeontx2-af: Enable Exact match flag in kex profileRatheesh Kannoth1-2/+3
Enabled EXACT match flag in Kex default profile. Since there is no space in key, NPC_PARSE_NIBBLE_ERRCODE is removed Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Invoke exact match functions if supportedRatheesh Kannoth2-0/+41
If exact match table is supported, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Wrapper functions for MAC addr add/del/update/resetRatheesh Kannoth2-12/+370
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2: Modify mbox request and response structuresRatheesh Kannoth2-8/+23
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Debugsfs support for exact match.Ratheesh Kannoth1-0/+179
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Drop rules for NPC MCAMRatheesh Kannoth6-6/+481
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: FLR handler for exact match table.Ratheesh Kannoth3-0/+31
FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: devlink configuration supportRatheesh Kannoth3-2/+101
CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Exact match scan from kex profileRatheesh Kannoth2-3/+35
CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Exact match supportRatheesh Kannoth6-1/+1029
CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Use hashed field in MCAM keyRatheesh Kannoth12-17/+554
CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-08octeontx2-af: Don't reset previous pfc configHariprasad Kelam3-13/+23
Current implementation is such that driver first resets the existing PFC config before applying new pfc configuration. This creates a problem like once PF or VFs requests PFC config previous pfc config by other PFVfs is getting reset. This patch fixes the problem by removing unnecessary resetting of PFC config. Also configure Pause quanta value to smaller as current value is too high. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06Revert "Merge branch 'octeontx2-af-next'"Jakub Kicinski16-2808/+37
This reverts commit 2ef8e39f58f08589ab035223c2687830c0eba30f, reversing changes made to e7ce9fc9ad38773b660ef663ae98df4f93cb6a37. There are build warnings here which break the normal build due to -Werror. Ratheesh was nice enough to quickly follow up with fixes but didn't hit all the warnings I see on GCC 12 so to unlock net-next from taking patches let get this series out for now. Link: https://lore.kernel.org/r/20220707013201.1372433-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06octeontx2-af: Enable Exact match flag in kex profileRatheesh Kannoth1-2/+3
Enabled EXACT match flag in Kex default profile. Since there is no space in key, NPC_PARSE_NIBBLE_ERRCODE is removed Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Invoke exact match functions if supportedRatheesh Kannoth2-0/+41
If exact match table is suppoted, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Wrapper functions for MAC addr add/del/update/resetRatheesh Kannoth2-11/+363
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2: Modify mbox request and response structuresRatheesh Kannoth2-8/+23
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Debugsfs support for exact match.Ratheesh Kannoth1-0/+179
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Drop rules for NPC MCAMRatheesh Kannoth6-6/+476
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: FLR handler for exact match table.Ratheesh Kannoth3-0/+31
FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: devlink configuration supportRatheesh Kannoth3-2/+100
CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Exact match scan from kex profileRatheesh Kannoth2-3/+35
CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Exact match supportRatheesh Kannoth6-1/+1016
CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06octeontx2-af: Use hashed field in MCAM keyRatheesh Kannoth12-17/+554
CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01octeontx2-af: fix operand size in bitwise operationShijith Thotton1-2/+2
Made size of operands same in bitwise operations. The patch fixes the klocwork issue, operands in a bitwise operation have different size at line 375 and 483. Signed-off-by: Shijith Thotton <sthotton@marvell.com> Link: https://lore.kernel.org/r/f4fba33fe4f89b420b4da11d51255e7cc6ea1dbf.1656586269.git.sthotton@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01marvell/octeontx2/af: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'so'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-01octeontx2-af: fix error code in is_valid_offset()Dan Carpenter1-1/+1
The is_valid_offset() function returns success/true if the call to validate_and_get_cpt_blkaddr() fails. Fixes: ecad2ce8c48f ("octeontx2-af: cn10k: Add mailbox to configure reassembly timeout") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YpXDrTPb8qV01JSP@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02octeontx2-af: debugfs: fix error return of allocationsNiels Dossche1-2/+2
Current memory failure code in the debugfs returns -ENOSPC. This is normally used for indicating that there is no space left on the device and is not applicable for memory allocation failures. Replace this with -ENOMEM. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Link: https://lore.kernel.org/r/20220430194656.44357-1-dossche.niels@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-26octeontx2-af: initialize action variableTom Rix1-8/+7
Clang static analysis reports this representative issue rvu_npc.c:898:15: warning: Assigned value is garbage or undefined req.match_id = action.match_id; ^ ~~~~~~~~~~~~~~~ The initial setting of action is conditional on if (is_mcam_entry_enabled(...)) The later check of action.op will sometimes be garbage. So initialize action. Reduce setting of *(u64 *)&action = 0x00; to *(u64 *)&action = 0; Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds11-136/+677
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-24Merge tag 'flexible-array-transformations-5.18-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
2022-03-21Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - hwrng core now credits for low-quality RNG devices. Algorithms: - Optimisations for neon aes on arm/arm64. - Add accelerated crc32_be on arm64. - Add ffdheXYZ(dh) templates. - Disallow hmac keys < 112 bits in FIPS mode. - Add AVX assembly implementation for sm3 on x86. Drivers: - Add missing local_bh_disable calls for crypto_engine callback. - Ensure BH is disabled in crypto_engine callback path. - Fix zero length DMA mappings in ccree. - Add synchronization between mailbox accesses in octeontx2. - Add Xilinx SHA3 driver. - Add support for the TDES IP available on sama7g5 SoC in atmel" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits) crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list crypto: dh - Remove the unused function dh_safe_prime_dh_alg() hwrng: nomadik - Change clk_disable to clk_disable_unprepare crypto: arm64 - cleanup comments crypto: qat - fix initialization of pfvf rts_map_msg structures crypto: qat - fix initialization of pfvf cap_msg structures crypto: qat - remove unneeded assignment crypto: qat - disable registration of algorithms crypto: hisilicon/qm - fix memset during queues clearing crypto: xilinx: prevent probing on non-xilinx hardware crypto: marvell/octeontx - Use swap() instead of open coding it crypto: ccree - Fix use after free in cc_cipher_exit() crypto: ccp - ccp_dmaengine_unregister release dma channels crypto: octeontx2 - fix missing unlock hwrng: cavium - fix NULL but dereferenced coccicheck error crypto: cavium/nitrox - don't cast parameter in bit operations crypto: vmx - add missing dependencies MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver crypto: xilinx - Add Xilinx SHA3 driver ...
2022-02-21octeontx2-af: cn10k: add workaround for ptp errataNaveen Mamindlapalli1-7/+80
This patch adds workaround for PTP errata given below. 1. At the time of 1 sec rollover of nano-second counter, the nano-second counter is set to 0. However, it should be set to (existing counter_value - 10^9). This leads to an accumulating error in the timestamp value with each sec rollover. 2. Additionally, the nano-second counter currently is rolling over at 'h3B9A_C9FF. It should roll over at 'h3B9A_CA00. The workaround for issue #1 is to speed up the ptp clock by adjusting PTP_CLOCK_COMP register to the desired value to compensate for the nanoseconds lost per each second. The workaround for issue #2 is to slow down the ptp clock such that the rollover occurs at ~1sec. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21octeontx2-pf: cn10k: add support for new ptp timestamp formatNaveen Mamindlapalli2-1/+45
The cn10k hardware ptp timestamp format has been modified primarily to support 1-step ptp clock. The 64-bit timestamp used by hardware is split into two 32-bit fields, the upper one holds seconds, the lower one nanoseconds. A new register (PTP_CLOCK_SEC) has been added that returns the current seconds value. The nanoseconds register PTP_CLOCK_HI resets after every second. The cn10k RPM block provides Rx/Tx timestamps to the NIX block using the new timestamp format. The software can read the current timestamp in nanoseconds by reading both PTP_CLOCK_SEC & PTP_CLOCK_HI registers. This patch provides support for new timestamp format. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17treewide: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva1-3/+3
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This code was transformed with the help of Coccinelle: (next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch) @@ identifier S, member, array; type T1, T2; @@ struct S { ... T1 member; T2 array[ - 0 ]; }; UAPI and wireless changes were intentionally excluded from this patch and will be sent out separately. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2022-02-11octeontx2-af: fix array bound errorHariprasad Kelam1-2/+3
This patch fixes below error by using proper data type. drivers/net/ethernet/marvell/octeontx2/af/rpm.c: In function 'rpm_cfg_pfc_quanta_thresh': include/linux/find.h:40:23: error: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u16[1]' {aka 'short unsigned int[1]'} [-Werror=array-bounds] 40 | val = *addr & GENMASK(size - 1, offset); Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20220211155539.13931-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10octeontx2-pf: Add TC feature for VFsSubbaraya Sundeep1-0/+1
This patch adds TC feature for VFs also. When MCAM rules are allocated for a VF then either TC or ntuple filters can be used. Below are the commands to use TC feature for a VF(say lbk0): devlink dev param set pci/0002:01:00.1 name mcam_count value 16 \ cmode runtime ethtool -K lbk0 hw-tc-offload on ifconfig lbk0 up tc qdisc add dev lbk0 ingress tc filter add dev lbk0 parent ffff: protocol ip flower skip_sw \ dst_mac 98:03:9b:83:aa:12 action police rate 100Mbit burst 5000 Also to modify any fields of the hardware context with NIX_AQ_INSTOP_WRITE command then corresponding masks of those fields must be set as per hardware. This was missing in ingress ratelimiting context. This patch sets those masks also. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Flow control resource managementHariprasad Kelam9-48/+276
CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Priority flow control configuration supportSunil Kumar Kori7-15/+251
Prirority based flow control (802.1Qbb) mechanism is similar to ethernet pause frames (802.3x) instead pausing all traffic on a link, PFC allows user to selectively pause traffic according to its class. Oceteontx2 MAC block (CGX) and CN10K Mac block (RPM) both supports PFC. As upper layer mbox handler is same for both the MACs, this patch configures PFC by calling apporopritate callbacks. Signed-off-by: Sunil Kumar Kori <skori@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Don't enable Pause frames by defaultHariprasad Kelam3-69/+27
Current implementation is such that 802.3x pause frames are enabled by default. As CGX and RPM blocks support PFC (priority flow control) also, instead of driver enabling one between them enable them upon request from PF or its VFs. Also add support to disable pause frames in driver unbind. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 23:51:56 +0000