summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2015-06-11net: igb: fix the start time for periodic output signalsRichard Cochran1-2/+2
When programming the start of a periodic output, the code wrongly places the seconds value into the "low" register and the nanoseconds into the "high" register. Even though this is backwards, it slipped through my testing, because the re-arming code in the interrupt service routine is correct, and the signal does appear starting with the second edge. This patch fixes the issue by programming the registers correctly. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04i40e: Make sure to be in VEB mode if SRIOV is enabled at probeAnjali Singhai Jain1-3/+17
If SRIOV is enabled we need to be in VEB mode not VEPA mode at probe. This fixes an NPAR bug when SRIOV is enabled in the BIOS. Change-ID: Ibf006abafd9a0ca3698ec24848cd771cf345cbbc Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-04i40e: start up in VEPA mode by defaultAnjali Singhai Jain4-5/+36
The patch fixes a bug in the default configuration which prevented a software bridge loaded on the PF interface from working correctly because broadcast packets are incorrectly looped back. Fix the general case, by loading the driver in VEPA mode Until a VF or VMDq VSI is added. This way loopback on the Main VSI is turned off until needed and can resolve the issue of unnecessary reflection for users that do not have VF or VMDq VSIs setup. The driver must now coordinate the loopback setting for the Flow Director (FDIR) VSI to make sure it is in sync with the current VEB or VEPA mode setting. The user can still switch bridge modes from the bridge commands and choose to be in VEPA mode with VF VSIs. Because of hardware requirements, the call to switch to VEB mode when no VF/VMDqs are present will be rejected. NOTE: This patch uses BIT_ULL as that is preferred going forward, a followup patch in the lower priority queue to net-next will fix up the remaining 1 << usages. Change-ID: Ib121ddb18fe4b3c4f52e9deda6fcbeb9105683d1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-04i40e/i40evf: Fix mixed size frags and linearizationAnjali Singhai Jain2-30/+20
This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-12e1000e: Add pm_qos headerDavid Ahern1-0/+1
Commit e2c6544829f moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-07igb: Fix NULL assignment to incorrect variable in igb_reset_q_vectorToshiaki Makita1-1/+1
adapter->tx_ring is set to NULL where rx_ring should be. Fixes: 5536d2102a2d ("igb: Combine q_vector and ring allocation into a single function") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-07igb: Fix oops on changing number of ringsToshiaki Makita1-0/+2
When changing the number of rings by ethtool -L, q_vectors are reused, which causes oops because of uninitialized pointers. - When an rx is reused as a tx, q_vector->rx.ring is not set to NULL, which misleads igb_poll() to determine that it has an rx ring although it actually points to the tx ring. - When a tx is reused as an rx, q_vector->rx.ring->skb (q_vector->ring[0].skb) has a value that was used as tx_stats before. Fix these problems by zeroing it out on reuseing it. Fixes: 02ef6e1d0b00 ("igb: Fix queue allocation method to accommodate changing during runtime") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-04ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skbAlexander Duyck1-1/+1
With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04fm10k: Do not assume budget will never be 0 for NAPIAlexander Duyck1-2/+2
The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-29bridge/nl: remove wrong use of NLM_F_MULTINicolas Dichtel2-5/+6
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend <john.r.fastabend@intel.com> CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko <jiri@resnulli.us> CC: Scott Feldman <sfeldma@gmail.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14i40e: Bump version to 1.3.2Catherine Sullivan1-1/+1
Bump. Change-ID: Id14baae72332d0f1a9bc5d351ea1a85cb0295ec3 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: Use new 40G speedsGreg Rose1-2/+1
The kernel has added SPEED_40000 for ethtool. Go ahead and use the new #define. Change-ID: Ic7e16e5c9e91085afe539f11ee1b7668adc4d0ef Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: get rid of unused localsJesse Brandeburg2-6/+3
These changes just remove unused variables and any code that uses them as the results of storing into these variables doesn't have any side effects that I can see or provide any benefit. Change-ID: I8a5ec7132ff1443d23aae729cef94beaaaf19e3a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: handle possible memory allocation failureJesse Brandeburg1-3/+11
The init_interrupt_scheme function had a possible failure path to allocate memory that was found by smatch. This adds the correct handling to the function to abort probe if the memory allocation fails. Change-ID: I2bf1d826a244209619da4c452d0d58b3eb5e26a3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e/i40evf: Save WR_CSR_PROT field from DEV/FUNC capabilitiesKevin Scott3-0/+7
Store the 8 bytes of the WR_CSR_PROT field returned as part of the get device/function capabilities AQ command. Change-ID: Ifcaeea2ff29885fa769e4f384c7db88a25e8afd0 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: enable user dump of internal hardware stateJesse Brandeburg3-0/+107
This is a feature to enable better debugging of user reported issues by allowing a bash script to acquire information about the internal hardware state. The data output to the kernel log is collected by the script and can then be sent to Intel. This is a critical debugging feature for helping us interpret and reproduce complex customer setups. Change-ID: Ie8b3ab09086d6870a709015f51ada05af10b41bb Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: print FCoE capability reported by the device functionVasu Dev1-0/+3
This is to allow quick check for FCoE capability is enabled or not in device function before any SW overrides. Change-ID: I5f78ba798d566f143161273156916c6f4074496e Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: For VF reset (VFR and VFLR) add some more delayAnjali Singhai Jain1-0/+3
With a HW issue that was recently discovered, after a VFLR HW might be indicating to us a reset completion little too early. So wait another 10 msec for cache to be cleaned up. Change-ID: I6a24dcf5dd7ffcd6500246e717411ef58532d1e9 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: move VF notification routines upMitch Williams1-123/+123
Move the VF notification functions to the top of the file. This eliminates an unnecessary declaration. Change-ID: I036171f14180ee9f0ce4e0a21334d6a217d06c94 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: notify VFs of link stateMitch Williams1-19/+31
Gratuitously notify VFs of link state when they activate their queues. In general, this is the last thing that a VF driver will do as it opens its interface, so this is a good time to notify the VF. Currently, VF devices assume link is up unless told otherwise, which means that VFs instantiated on a PF with no link will report the wrong state. This change corrects that issue. Change-ID: Iea53622904ecc681ac3f8938d81c30033ef9a0a6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40evf: remove aq_pendingMitch Williams3-38/+12
The aq_pending field in the adapter structure is actually redundant with the current_op field. Remove the aq_pending field and expunge all traces of it from the official record. This simplifies the code significantly, especially in the virtual channel completion routine. Change-ID: Ib2957c8c19882bd0cecc6fcd133912c24b46a1ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: Add support to program FDir SB rules for VF from PF through ethtoolAnjali Singhai Jain1-0/+26
With this patch we can now add Flow director Sideband rules for a VF from it's PF. Here is an example on how it can be done when VF id = 5 and queue = 2: "ethtool -N ethx flow-type udp4 src-ip x.x.x.x dst-ip y.y.y.y src-port p1 dst-port p2 action 2 user-def 5" User-def specifies VF id and action specifies queue. Change-ID: Ib37d6dff3823a4d85caffde638473891c38c2b89 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40evf: fix bad indentationMitch Williams1-1/+1
Not sure how this slipped through. Cosmetic change only. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40e: stop VF ringsMitch Williams1-0/+5
Explicitly stop the rings belonging to each VF when disabling SR-IOV. Even though the VFs were gone, and the associated VSIs were removed, the rings were not stopped, and in some circumstances the hardware would continue to access the memory formerly used by the rings, causing memory corruption or DMAR errors, both of which would lead to general malaise of the kernel. To relieve this condition, explicitly stop all the rings associated with each VF before releasing its resources. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Bump driver version to 0.15.2Jeff Kirsher1-1/+1
With the recent driver changes, bump the version. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-14fm10k: corrected VF multicast updateJeff Kirsher1-2/+5
VFs were being improperly added to the switch's multicast group. The error stems from the fact that incorrect arguments were passed to the "update_mc_addr" function. It would seem to be a copy paste error since the parameters are similar to the "update_uc_addr" function. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: mbx_update_max_size does not drop all oversized messagesJeff Kirsher1-3/+6
When we call update_max_size it does not drop all oversized messages. This is due to the difficulty in performing this operation, since it is a FIFO which makes updating anything other than head or tail very difficult. To fix this, modify validate_msg_size to ensure that we error out later when trying to transmit the message that could be oversized. This will generally be a rare condition, as it requires the FIFO to include a message larger than the max_size negotiated during mailbox connect. Note that max_size is always smaller than rx.size so it should be safe to use here. Also, update the update_max_size function header comment to clearly indicate that it does not drop all oversized messages, but only those at the head of the FIFO. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: reset head instead of calling update_max_sizeJeff Kirsher1-2/+16
When we forcefully shutdown the mailbox, we then go about resetting max size to 0, and clearing all messages in the FIFO. Instead, we should just reset the head pointer so that the FIFO becomes empty, rather than changing the max size to 0. This helps prevent increment in tx_dropped counter during mailbox negotiation, which is confusing to viewers of Linux ethtool statistics output. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: renamed mbx_tx_dropped to mbx_tx_oversizedJeff Kirsher1-1/+1
The use of dropped doesn't really mean dropped mailbox messages, but rather specifically messages which were too large to fit in the remote Rx FIFO. Rename the stat to more clearly indicate what it means. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: update xcast mode before synchronizing multicast addressesJeff Kirsher1-11/+11
When the PF receives a request to update a multicast address for the VF, it checks the enabled multicast mode first. Fix a bug where the VF tried to set a multicast address before requesting the required xcast mode. This ensures the multicast addresses are honored as long as the xcast mode was allowed. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: start service timer on probeJeff Kirsher1-3/+6
Since the service task handles varying work that doesn't all require the interface to be up, launch the service timer immediately. This ensures that we continually check the mailbox, as well as handle other tasks while the device is down. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: fix function header commentJeff Kirsher1-2/+1
The header comment included a miscopy of a C-code line, and also mis-used Rx FIFO when it clearly meant Tx FIFO Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: comment next_vf_mbx flowJeff Kirsher1-0/+11
Add a header comment explaining why we have the somewhat crazy mailbox flow. This flow is necessary as it prevents the PF<->SM mailbox from being flooded by the VF messages, which normally trigger a message to the PF. This helps prevent the case where we see a PF mailbox timeout. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: don't handle mailbox events in iov_event path and always process mailboxJeff Kirsher2-32/+5
Since we already schedule the service task, we can just wait for this task to handle the mailbox events from the VF. This reduces some complex code flow, and makes it so we have a single path for handling the VF messages. There is a possibility that we have a slight delay in handling VF messages, but it should be minimal. The result of tx_complete and !rx_ready is insufficient to determine whether we need to process the mailbox. There is a possible race condition whereby the VF fills up the mbmem for us, but we have already recently processed the mailboxes in the interrupt. During this time, the interrupt is disabled. Thus, our Rx FIFO is empty, but the mbmem now has data in it. Since we continually check whether Rx FIFO is empty, we then never call process. This results in the possibility to prevent PF from handling the VF mailbox messages. Instead, just call process every time, despite the fact that we may or may not have anything to process for the VF. There should be minimal overhead for doing this, and it resolves an issue where the VF never comes up due to never getting response for its SET_LPORT_STATE message. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: use separate workqueue for fm10k driverJeff Kirsher3-1/+16
Since we run the watchdog periodically, which might take a while and potentially monopolize the system default workqueue, create our own separate work queue. This also helps reduce and stabilize latency between scheduling the work in our interrupt and actually performing the work. Still use a timer for the regular scheduled interval but queue the work onto its own work queue. It seemed overkill to create a single workqueue per interface, so we just spawn a single work queue for all interfaces upon driver load. For this reason, use a multi-threaded workqueue with one thread per processor, rather than single threaded queue. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Set PF queues to unlimited bandwidth during virtualizationJeff Kirsher1-1/+2
When returning virtualization queues from the VF back to the PF, do not retain the VF rate limiter. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Todd Russell <todd.a.russell@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: expose tx_timeout_count as an ethtool statJeff Kirsher1-0/+2
Named it tx_hang_count to differentiate it from tx_hwtstamp_timeout. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: only increment tx_timeout_count in Tx hang pathJeff Kirsher1-1/+0
We were incrementing the tx_timeout_count for both the Tx hang and then for all reset flows. Instead, we should only increment tx_timeout_count in the Tx hang path, so that our Tx hang counter does not increment when it was not caused by a Tx hang. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: remove extraneous "Reset interface" messageJeff Kirsher1-1/+0
Since we already print this message when a reset is requested via the RESET_REQUESTED flag, we do not need to print it before setting the flag. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: separate PF only stats so that VF does not display themJeff Kirsher1-14/+37
This patch resolves an issue with ethtool stats displaying useless values on the VF, because some stats simply have no meaning to the VF. Resolve this by splitting these out into PF_STATS and only showing them if we aren't the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: use hw->mac.max_queues for statsJeff Kirsher2-8/+12
Even though it shouldn't strictly matter, don't count queue stats higher than the max_queues value stored for this mac. This ensures that we don't attempt to check queues which don't belong to use in VFs. This shouldn't be a visible change, as the VFs should see zero for queues which don't belong to them. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: only show actual queues, not the maximum in hardwareJeff Kirsher1-2/+3
Currently, we show statistics for all 128 queues, even though we don't necessarily have that many queues available especially in the VF case. Instead, use the hw->mac.max_queues value, which tells us how many queues we actually have, rather than the space for the rings we allocated. In this way, we prevent dumping statistics that are useless on the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: allow creation of VLAN on default vidJeff Kirsher1-4/+4
Previously, the user was not allowed to create a VLAN interface on top of the switch default vid. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: fix unused warningsJeff Kirsher7-37/+35
The were several functions which had parameters which were never or sometimes used in functions. To resolve possible compiler warnings, use __always_unused or __maybe_unused kernel macros to resolve. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Add netconsole supportJeff Kirsher3-0/+28
This change adds a function called "fm10k_netpoll" that's used to define "ndo_poll_controller" in "fm10k_netdev_ops". This is required to enable support for "netconsole" in fm10k. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Have the VF get the default VLAN during initJeff Kirsher1-1/+5
Currently, the VFs do not read the default VLAN during initialization, so they will not be able to indicate untagged frames properly. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Correct spelling mistakeJeff Kirsher1-2/+2
Corrected a spelling mistake that was found over time. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Remove redundant rx_errors in ethtoolJeff Kirsher3-7/+4
Output of ethtool was reporting 2 rx_errors entries. This change removes one of the redundant entries. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-14fm10k: Corrected an error in Tx statisticsJeff Kirsher1-2/+2
The function collecting Tx statistics was actually using values from the RX ring. Thus, Tx and Rx statistics values reported by "ifconfig" will return identical values. This change corrects this error and the Tx statistics is now reading from the Tx ring. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-13e1000e: Move pm_qos_req to e1000e adapterThomas Graf2-4/+5
e1000e is the only driver requiring pm_qos_req, instead of causing every device to waste up to 240 bytes. Allocate it for the specific driver. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-10 19:07:01 +0000