Age | Commit message (Collapse) | Author | Files | Lines | |
---|---|---|---|---|---|
2022-06-30 | intel/ixgbevf:fix repeated words in comments | Jilin Yuan | 2 | -2/+2 | |
Delete the redundant word 'slot'. Delete the redundant word 'we'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2022-06-30 | intel: remove unused macros | Jesse Brandeburg | 1 | -4/+0 | |
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2022-05-06 | ixgbe: propagate XFRM offload state direction instead of flags | Leon Romanovsky | 2 | -4/+4 | |
Convert the ixgbe driver to rely on XFRM offload state direction instead of flags bits that were not checked at all. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> | |||||
2022-03-08 | ixgbevf: add disable link state | Slawomir Mrozowicz | 5 | -1/+57 | |
Add possibility to disable link state if it is administratively disabled in PF. It is part of the general functionality that allows the PF driver to control the state of the virtual link VF devices. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2022-02-23 | ixgbevf: clean up some inconsistent indenting | Yang Li | 1 | -1/+1 | |
Eliminate the follow smatch warning: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:2756 ixgbevf_alloc_q_vector() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2022-02-10 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | Jakub Kicinski | 1 | -6/+7 | |
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||||
2022-02-04 | ixgbevf: Require large buffers for build_skb on 82599VF | Samuel Mendoza-Jonas | 1 | -6/+7 | |
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb around new data in the page buffer shared with the ixgbe PF. This uses either a 2K or 3K buffer, and offsets the DMA mapping by NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to ensure the PF does not write a full 2K bytes into the buffer, which is actually 2K minus the offset. However on the 82599 virtual function, the RXDCTL mechanism is not available. The driver attempts to work around this by using the SET_LPE mailbox method to lower the maximm frame size, but the ixgbe PF driver ignores this in order to keep the PF and all VFs in sync[0]. This means the PF will write up to the full 2K set in SRRCTL, causing it to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer. With 4K pages split into two buffers, this means it either writes NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA mapping. Avoid this by only enabling build_skb when using "large" buffers (3K). These are placed in each half of an order-1 page, preventing the PF from writing past the end of the mapping. [0]: Technically it only ever raises the max frame size, see ixgbe_set_vf_lpe() in ixgbe_sriov.c Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2022-01-27 | ixgbevf: Remove useless DMA-32 fallback configuration | Christophe JAILLET | 1 | -14/+6 | |
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-12-31 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next | David S. Miller | 1 | -1/+1 | |
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-12-28 | ixgbevf: switch to napi_build_skb() | Alexander Lobakin | 1 | -1/+1 | |
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbevf driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-12-13 | bpf: Let bpf_warn_invalid_xdp_action() report more info | Paolo Abeni | 1 | -1/+1 | |
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com | |||||
2021-11-22 | ethtool: extend ringparam setting/getting API with rx_buf_len | Hao Chen | 1 | -2/+6 | |
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-11-17 | ixgbevf: Add support for new mailbox communication between PF and VF | Radoslaw Tyl | 4 | -2/+23 | |
Provide improved mailbox communication, between PF and VF, which is defined as API version 1.5. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-11-17 | ixgbevf: Mailbox improvements | Radoslaw Tyl | 6 | -84/+265 | |
Improve reliability of the mailbox communication and remove its potential flaws that may lead to the undefined or faulty behavior. Recently some users reported issues on ESX with 10G Intel NICs which were found to be caused by incorrect implementation of the PF-VF mailbox communication. Technical investigation highlighted areas to improve in the communication between PF or VF that wants to send the message (sender) and the other part which receives the message (receiver): - Locking the mailbox when the sender wants to send a message - Releasing the mailbox when the communication ends - Returning the result of the mailbox message execution Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-11-17 | ixgbevf: Add legacy suffix to old API mailbox functions | Radoslaw Tyl | 3 | -9/+9 | |
Add legacy suffix to mailbox functions which should be backwards compatible with older PF drivers. Communication during API negotiation always has to be done using the earlier implementation. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-11-17 | ixgbevf: Improve error handling in mailbox | Radoslaw Tyl | 3 | -5/+13 | |
Add new handling for error codes: IXGBE_ERR_CONFIG - ixgbe_mbx_operations is not correctly set IXGBE_ERR_TIMEOUT - mailbox operation, e.g. poll for message, timeout Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-11-17 | ixgbevf: Rename MSGTYPE to SUCCESS and FAILURE | Radoslaw Tyl | 3 | -23/+27 | |
There is name similarity within IXGBE_VT_MSGTYPE_ACK and PFMAILBOX.ACK / VFMAILBOX.ACK. MSGTYPE macros are renamed to SUCCESS and FAILURE because they are not specified in datasheet and now will be easily distinguishable. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-10-29 | net: ixgbevf: Remove redundant initialization of variable ret_val | Colin Ian King | 1 | -1/+1 | |
The variable ret_val is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-10-02 | ethernet: use eth_hw_addr_set() instead of ether_addr_copy() | Jakub Kicinski | 1 | -3/+3 | |
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-08-24 | ethtool: extend coalesce setting uAPI with CQE mode | Yufeng Mo | 1 | -2/+6 | |
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||||
2021-07-06 | ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct ↵ | Taehee Yoo | 1 | -7/+13 | |
xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, ixgbevf should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip link add bond0 type bond #eth0 is ixgbevf interface ip link set eth0 master bond0 ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf] Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f RSP: 0018:ffff8880089af390 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11 R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000 R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040 FS: 00007fdf9883a680(0000) GS:ffff88811a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf] ? rcu_read_lock_sched_held+0x91/0xc0 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf] ? lock_acquire+0x191/0x720 ? bond_ipsec_add_sa+0x48/0x350 [bonding] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? rcu_read_lock_held+0x91/0xa0 ? rcu_read_lock_sched_held+0xc0/0xc0 bond_ipsec_add_sa+0x193/0x350 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-06-24 | intel: Remove rcu_read_lock() around XDP program invocation | Toke Høiland-Jørgensen | 1 | -2/+0 | |
The Intel drivers all have rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> # i40e Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20210624160609.292325-12-toke@redhat.com | |||||
2021-06-07 | Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -0/+3 | |
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-06-03 | ixgbevf: add correct exception tracing for XDP | Magnus Karlsson | 1 | -0/+3 | |
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-05-26 | intel: call csum functions with well formatted arguments | Jesse Brandeburg | 1 | -1/+1 | |
The sparse build (C=2) found that there were two drivers who had not been convered to call the csum_replace_by_diff() function with sparse clean arguments. Most if not all drivers force the cast like this patch does. So these drivers are now joining the party (a bit late), but with no functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-04-13 | net: intel: Remove unused function pointer typedef ixgbe_mc_addr_itr | Chen Lin | 1 | -3/+0 | |
Remove the 'ixgbe_mc_addr_itr' typedef as it is not used. Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-03-23 | ixgbevf: Fix fall-through warnings for Clang | Gustavo A. R. Silva | 1 | -0/+1 | |
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-03-23 | intel: clean up mismatched header comments | Jesse Brandeburg | 1 | -5/+13 | |
A bunch of header comments were showing warnings when compiling with W=1. Fix them all at once. This changes only comments. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-03-04 | ixgbe: fail to create xfrm offload of IPsec tunnel mode SA | Antony Antony | 1 | -0/+5 | |
Based on talks and indirect references ixgbe IPsec offlod do not support IPsec tunnel mode offload. It can only support IPsec transport mode offload. Now explicitly fail when creating non transport mode SA with offload to avoid false performance expectations. Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Antony Antony <antony@phenome.org> Acked-by: Shannon Nelson <snelson@pensando.io> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2021-02-04 | net: use the new dev_page_is_reusable() instead of private versions | Alexander Lobakin | 1 | -7/+2 | |
Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||||
2021-01-19 | net: ixgbevf: use skb_csum_is_sctp instead of protocol check | Xin Long | 1 | -13/+1 | |
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and yet it also makes ixgbevf support SCTP CRC checksum offload for UDP and GRE encapped packets, just as it does in igb driver. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||||
2021-01-08 | net, xdp: Introduce xdp_prepare_buff utility routine | Lorenzo Bianconi | 1 | -6/+6 | |
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> | |||||
2021-01-08 | net, xdp: Introduce xdp_init_buff utility routine | Lorenzo Bianconi | 1 | -4/+3 | |
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> | |||||
2020-12-01 | xsk: Propagate napi_id to XDP socket Rx path | Björn Töpel | 1 | -1/+1 | |
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com | |||||
2020-09-29 | net: intel: Remove in_interrupt() warnings | Sebastian Andrzej Siewior | 1 | -2/+0 | |
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-09-25 | intel-ethernet: clean up W=1 warnings in kdoc | Jesse Brandeburg | 1 | -1/+2 | |
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-08-26 | net: Take common prefetch code structure into a function | Tariq Toukan | 1 | -8/+3 | |
Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-08-03 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next | David S. Miller | 1 | -6/+0 | |
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-08-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 135 files changed, 4603 insertions(+), 1013 deletions(-). The main changes are: 1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko. 2) Add BPF iterator for map elements and to iterate all BPF programs for efficient in-kernel inspection, from Yonghong Song and Alexei Starovoitov. 3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid unwinder errors, from Song Liu. 4) Allow cgroup local storage map to be shared between programs on the same cgroup. Also extend BPF selftests with coverage, from YiFei Zhu. 5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM load instructions, from Jean-Philippe Brucker. 6) Follow-up fixes on BPF socket lookup in combination with reuseport group handling. Also add related BPF selftests, from Jakub Sitnicki. 7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for socket create/release as well as bind functions, from Stanislav Fomichev. 8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct xdp_statistics, from Peilin Ye. 9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime. 10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6} fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin. 11) Fix a bpftool segfault due to missing program type name and make it more robust to prevent them in future gaps, from Quentin Monnet. 12) Consolidate cgroup helper functions across selftests and fix a v6 localhost resolver issue, from John Fastabend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-07-30 | ixgbevf: use generic power management | Vaibhav Gupta | 1 | -34/+10 | |
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), and pci_enable/disable_device(), which is not recommended. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2020-07-25 | bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commands | Andrii Nakryiko | 1 | -6/+0 | |
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com | |||||
2020-07-01 | ethernet/intel: Convert fallthrough code comments | Jeff Kirsher | 2 | -8/+8 | |
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | |||||
2020-06-25 | net/intel: remove driver versions from Intel drivers | Jeff Kirsher | 3 | -9/+1 | |
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alek Loktionov <aleksandr.loktionov@intel.com> CC: Kevin Liedtke <kevin.d.liedtke@intel.com> CC: Aaron Rowden <aaron.f.rowden@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> | |||||
2020-05-14 | ixgbevf: Add XDP frame size to VF driver | Jesper Dangaard Brouer | 1 | -7/+27 | |
This patch mirrors the changes to ixgbe in previous patch. This VF driver doesn't support XDP_REDIRECT, but correct tailroom is still necessary for BPF-helper xdp_adjust_tail. In legacy-mode + larger PAGE_SIZE, due to lacking tailroom, we accept that xdp_adjust_tail shrink doesn't work. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Link: https://lore.kernel.org/bpf/158945345984.97035.13518286183248025173.stgit@firesoul | |||||
2020-03-12 | net: ixgbevf: reject unsupported coalescing params | Jakub Kicinski | 1 | -0/+1 | |
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-01-19 | Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -5/+0 | |
2020-01-09 | ixgbevf: Remove limit of 10 entries for unicast filter list | Radoslaw Tyl | 1 | -5/+0 | |
Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> | |||||
2019-12-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -2/+2 | |
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 1 | -1/+1 | |
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-12-09 | treewide: Use sizeof_field() macro | Pankaj Bharadiya | 1 | -2/+2 | |
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net | |||||
2019-09-15 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -1/+2 | |
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net> |