summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
AgeCommit message (Collapse)AuthorFilesLines
2022-03-08ixgbevf: add disable link stateSlawomir Mrozowicz1-0/+2
Add possibility to disable link state if it is administratively disabled in PF. It is part of the general functionality that allows the PF driver to control the state of the virtual link VF devices. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17ixgbevf: Mailbox improvementsRadoslaw Tyl1-0/+5
Improve reliability of the mailbox communication and remove its potential flaws that may lead to the undefined or faulty behavior. Recently some users reported issues on ESX with 10G Intel NICs which were found to be caused by incorrect implementation of the PF-VF mailbox communication. Technical investigation highlighted areas to improve in the communication between PF or VF that wants to send the message (sender) and the other part which receives the message (receiver): - Locking the mailbox when the sender wants to send a message - Releasing the mailbox when the communication ends - Returning the result of the mailbox message execution Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17ixgbevf: Add legacy suffix to old API mailbox functionsRadoslaw Tyl1-1/+1
Add legacy suffix to mailbox functions which should be backwards compatible with older PF drivers. Communication during API negotiation always has to be done using the earlier implementation. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher1-1/+0
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alek Loktionov <aleksandr.loktionov@intel.com> CC: Kevin Liedtke <kevin.d.liedtke@intel.com> CC: Aaron Rowden <aaron.f.rowden@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2018-10-31ixgbe/ixgbevf: fix XFRM_ALGO dependencyJeff Kirsher1-2/+2
Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann <arnd@arndb.de> CC: Shannon Nelson <shannon.nelson@oracle.com> Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2018-08-28ixgbevf: enable VF IPsec offload operationsShannon Nelson1-0/+25
Add the IPsec initialization into the driver startup and add the Rx and Tx processing hooks. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-28ixgbevf: add VF IPsec offload codeShannon Nelson1-0/+8
Add the IPsec offload support code. This is based off of the similar code in ixgbe, but instead of writing the SA registers, the VF asks the PF to setup the offload by sending the offload information to the PF via the standard mailbox. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: Fix coexistence of malicious driver detection with XDPAlexander Duyck1-0/+1
In the case of the VF driver it is supposed to provide a context descriptor that allows us to provide information about the header offsets inside of the frame. However in the case of XDP we don't really have any of that information since the data is minimally processed. As a result we were seeing malicious driver detection (MDD) events being triggered when the PF had that functionality enabled. To address this I have added a bit of new code that will "prime" the XDP ring by providing one context descriptor that assumes the minimal setup of an Ethernet frame which is an L2 header length of 14. With just that we can provide enough information to make the hardware happy so that we don't trigger MDD events. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23ixgbevf: Add support for XDP_TX actionTony Nguyen1-1/+19
This implements the XDP_TX action which is modeled on the ixgbe implementation. However instead of using CPU id to determine which XDP queue to use, this uses the received RX queue index, which is similar to i40e. Doing this eliminates the restriction that number of CPUs not exceed number of XDP queues that ixgbe has. Also, based on the number of queues available, the number of TX queues may be reduced when an XDP program is loaded in order to accommodate the XDP queues. Based largely on commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add XDP support for pass and drop actionsTony Nguyen1-3/+7
Implement XDP_PASS and XDP_DROP based on the ixgbe implementation. Based largely on commit 924708081629 ("ixgbe: add XDP support for pass and drop actions"). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26ixgbevf: allocate the rings as part of q_vectorEmil Tantilov1-1/+6
Make it so that all rings allocations are made as part of q_vector. The advantage to this is that we can keep all of the memory related to a single interrupt in one page. The goal is to bring the logic of handling rings closer to ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add support for padding packetEmil Tantilov1-0/+11
Following the logic from commit 2de6aa3a666e ("ixgbe: Add support for padding packet") Add support for providing a buffer with headroom and tail room to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this combined with the DMA changes we can start using build_skb to build frames around an incoming Rx buffer instead of having to memcpy the headers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add support for using order 1 pages to receive large framesEmil Tantilov1-8/+44
Based on commit 8649aaef4044 ("igb: Add support for using order 1 pages to receive large frames") Add support for using 3K buffers in order 1 page. We are reserving 1K for now to have space available for future tail room and head room when we enable build_skb support. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add ethtool private flag for legacy RxEmil Tantilov1-0/+2
Introduce legacy-rx private flag that will allow switching between the old and new (build_skb based) Rx code paths. The implementation is the same as in commit e08912985b29 ("igb: Add support for ethtool private flag to allow use of legacy Rx") This provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add counters for Rx page allocationsEmil Tantilov1-2/+4
We already had placehloders for failed page and buffer allocations. Added alloc_rx_page and made sure the stats are properly updated and exposed in ethtool. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: update code to better handle incrementing page countEmil Tantilov1-1/+6
Based on commit bd4171a5d4c2 ("igb: update code to better handle incrementing page count") Update the driver code so that we do bulk updates of the page reference count instead of just incrementing it by one reference at a time. The advantage to doing this is that we cut down on atomic operations and this in turn should give us a slight improvement in cycles per packet. In addition if we eventually move this over to using build_skb the gains will be more noticeable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERINGEmil Tantilov1-0/+3
Based on commit 5be5955425c2 ("igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC") and commit 7bd175928280 ("igb: Add support for DMA_ATTR_WEAK_ORDERING") Convert the calls to dma_map/unmap_page() to the attributes version and add DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING which should help improve performance on some platforms. Move sync_for_cpu call before we perform a prefetch to avoid invalidating the first 128 bytes of the packet on architectures where that call may invalidate the cache. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: Check for RSS key before setting valueTony Nguyen1-1/+1
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-03ixgbevf: get rid of custom busy polling codeEric Dumazet1-113/+0
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03ixgbevf: Add support for VF promiscuous modeDon Skidmore1-0/+1
This patch extends the mailbox message to allow for VF promiscuous mode support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18ixgbevf: change hw_dbg to use netdev_dbgEmil Tantilov1-7/+4
Instead of the home brewed macro make use of netdev_dbg same as the ixgbe driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: add VF support for new hardwareDon Skidmore1-0/+2
This patch add VF support for the new X553 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Use mac_ops instead of trying to identify NIC typeAlexander Duyck1-1/+0
This change makes it so that we can just use function pointers instead of having to identify if a given VF is running on a Linux or Windows PF. By doing this we can avoid having to pull too much information out of the lower layers and can instead just make use of the mac_ops pointers since they should differ between the two types of VFs anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Support Windows hosts (Hyper-V)KY Srinivasan1-0/+11
On Hyper-V, the VF/PF communication is a via software mediated path as opposed to the hardware mailbox. Make the necessary adjustments to support Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: make use of BIT() macro to avoid shift of signed valuesJacob Keller1-4/+4
Also cleanup a case where we're bit shifting a value into place, and use an unsigned constant. Make use of the unsigned postfix in places where BIT() macro is not appropriate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: add support for per-queue ethtool statsEmil Tantilov1-10/+0
Implement per-queue statistics for packets, bytes and busy poll specific counters. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbevf: use bit operations for setting and checking resetsEmil Tantilov1-7/+2
Move the reset flags to adapter->state in order to make use of bit operations. This is an alternative patch to the one previously submitted by John Greene. Suggested-by: Alexander Duyck <aduyck@mirantis.com> Reported-by: Scott Otto <otts62@yahoo.com> Reported-by: John Greene <jogreene@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-29ixgbevf: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann1-0/+2
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23ixgbevf: Limit lowest interrupt rate for adaptive interrupt moderation to 12KAlexander Duyck1-2/+1
This patch is the ixgbevf version of commit 8ac34f10a5ea4 "ixgbe: Limit lowest interrupt rate for adaptive interrupt moderation to 12K" The same logic applies here as well as the same results since a netperf test will starve for memory in the time from one Tx interrupt to the next. As a result the ixgbevf driver underperformed when compared to vhost_net. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23ixgbe, ixgbevf: Add new mbox API xcast modeHiroshi Shimamoto1-0/+6
The limitation of the number of multicast address for VF is not enough for the large scale server with SR-IOV feature. IPv6 requires the multicast MAC address for each IP address to handle the Neighbor Solicitation message. We couldn't assign over 30 IPv6 addresses to a single VF. This patch introduces the new mailbox API, IXGBE_VF_UPDATE_XCAST_MODE, to update multicast mode of VF. This adds 3 modes; - NONE only L2 exact match addresses or Flow Director enabled - MULTI BAM and ROMPE set - ALLMULTI BAM, ROMPE and MPE set If a guest VF user wants over 30 MAC multicast addresses, set IFF_ALLMULTI to request PF to update xcast mode to enable VF multicast promiscuous mode. On the other hand, enabling VF multicast promiscuous mode may affect security and performance in the network of the NIC. Only trusted VF can enable multicast promiscuous mode. The behavior of untrusted VF is the same as previous version. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23ixgbevf: add support for reporting RSS key and hash table for X550Emil Tantilov1-2/+7
This patch extends the reporting of the RSS key and hash table by adding support for X550 VFs. The difference is that X550 VFs have their own registers for RSS key and indirection table, so there is no need to query the PF. The RSS key and indirection table are stored in the adapter structure during the configuration of VFRSSRK and VFRETA which in turn can be used in ethtool for reporting. The logic for writing VFRETA is also changed to make sure that the indirection table is reported correctly. In addition this patch adds defines for the VFRETA entries and number of VFRSSRK registers as well as some whitespace cleanups. Reported-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add RSS Key query codeVlad Zolotarov1-0/+1
Add the ixgbevf_get_rss_key() function that queries the PF for an RSS Random Key using a new VF-PF channel IXGBE_VF_GET_RSS_KEY command. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add a RETA query codeVlad Zolotarov1-0/+1
We will currently support only 82599 and x540 devices. Support for other devices will be added later. - Added a new API version support. - Added the query implementation in the ixgbevf. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbevf: Fix code comments and whitespaceJeff Kirsher1-37/+45
Fix the code comments to align with drivers/net/ code commenting style, as well as whitespace issues. The whitespace issues resolve checkpatch errors, like lines exceeding 80 chars (except for strings) and the use of tabs where possible. CC: <kernel-team@fb.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2015-02-05ixgbevf: combine all of the tasks into a single service taskEmil Tantilov1-7/+6
This change combines the reset and watchdog tasklets into a single task. The advantage of this is that we can avoid multiple schedules of the reset task when we have a reset event needed due to either the mailbox going down or transmit packets being present on a link down. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: rewrite watchdog task to function similar to igbvfEmil Tantilov1-0/+1
This patch cleans up the logic dealing with link down/up by breaking down the link detection and up/down events into separate functions - similar to how these events are handled in other drivers. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: Add code to check for Tx hangEmil Tantilov1-1/+20
This patch adds code to allow for Tx hang checking. The idea is to provide more robust debug info in the event of a transmit unit hang. Similar to the logic in ixgbe. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: enable multiple queue supportEmil Tantilov1-0/+1
This patch enables multiple queues and RSS support for the VF. Maximum of 2 queues are supported due to available vectors. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbevf: add support for X550 VFsEmil Tantilov1-0/+4
This patch adds initial support for VFs on a new mac - X550. The patch adds the basic structures and device IDs for the X550 VFs that would allow the driver to load and pass traffic. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: add netpoll supportEmil Tantilov1-1/+1
This patch adds ixgbevf_netpoll() a callback for .ndo_poll_controller to allow for the VF interface to be used with netconsole. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Change receive model to use double buffered page based receivesEmil Tantilov1-15/+9
This patch changes the basic receive path for ixgbevf so that instead of receiving the data into an skb it is received into a double buffered page. The main change is that the receives will be done in pages only and then pull the header out of the page and copy it into the sk_buff data. This has the advantages of reduced cache misses and improved performance on IOMMU enabled systems. v2: - added pfmemalloc check to a new function for reusable page - moved atomic_inc outside of #if/else in ixgbevf_add_rx_frag() - reverted the removal of the api check in ixgbevf_change_mtu() CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Update Rx next to clean in real timeEmil Tantilov1-2/+0
Since the next_to_clean value is only accessed by the Rx interrupt handler we can save on stack space by just storing our updated values back in next_to_clean instead of using the stack variable i. This should help to reduce stack space and we can further collapse the size of the function. Also removed non_eop_descs counter as it was never shown in the stats. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Combine the logic for post Rx processing into single functionEmil Tantilov1-1/+3
This patch cleans up ixgbevf_clean_rx_irq() by merging several similar operations into a new function - ixgbevf_process_skb_fields(). CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Test Rx status bits directly out of the descriptorEmil Tantilov1-0/+7
Instead of keeping a local copy of the status bits from the descriptor we can just read them directly - this is accomplished with the addition of ixgbevf_test_staterr(). In addition instead of doing a byteswap on the status bits value, we can byteswap the constant values we are testing since that can be done at compile time which should help to improve performance on big-endian systems. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbevf: remove useless bd_number from struct ixgbevf_adapterEthan Zhao1-1/+0
It is useless and buggy, just remove it. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11ixgbevf: Add bit to mark work queue initializationMark Rustad1-0/+1
An indication of work queue initialization is needed. This is because register accesses prior to that time can detect a removal and attempt to schedule the watchdog task. Adding the __IXGBEVF_WORK_INIT bit allows this to be checked and if not set prevent the watchdog task scheduling. By checking for a removal right after initialization, the probe can be failed at that point without getting the watchdog task involved. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31ixgbevf: Fix rcu warnings induced by LERMark Rustad1-0/+1
Resolve some rcu warnings produced when LER actions take place. This appears to be due to not holding the rtnl lock when calling ixgbe_down, so hold the lock. Also avoid disabling the device when it is already disabled. This check is necessary because the callback can be called more than once in some cases. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Check register reads for adapter removalMark Rustad1-0/+1
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Since this patch adds so much to ixgbe_read_reg, stop inlining it, to reduce driver bloat. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 08:28:01 +0000