summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
AgeCommit message (Collapse)AuthorFilesLines
2015-12-12ixgbe: Simplify configuration of setting VLVF and VLVFBAlexander Duyck1-54/+34
This patch addresses several issues within the VLVF and VLVFB configuration First was the fact that code was overly complicated with multiple conditional paths depending on if we adding or removing and which bit we were going to add or remove. Instead of messing with all that I have simplified it by using (vid / 32) and (1 - vid / 32) to identify our register and the other vlvfb register. Second was the fact that we were likely leaking a few packets into the PF in cases where we were deleting an entry and the VFTA filter for that entry as the ordering was such that we deleted the pool and then the VLAN filter instead of the other way around. I have updated that by adding a check for no bits being set and if that occurs we clear things up in the proper order. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Reduce VT code indent in set_vfta by introducing jump labelAlexander Duyck1-72/+70
In order to clear the way for upcoming work I thought it best to drop the level of indent in the ixgbe_set_vfta_generic function. Most of the code is held in the virtualization specific section. So the easiest approach is to just add a jump label and jump past the bulk of the code if it is not enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Simplify definitions for regidx and bit in set_vftaAlexander Duyck1-29/+19
This patch simplifies the logic for setting the VFTA register by removing the number of conditional checks needed. Instead we just use some boolean logic to generate vfta_delta, and if that is set then we xor the vfta by that value and write it back. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Wait for master disable to be setMark Rustad1-1/+13
According to the datasheets, the driver should wait for the master disable bit to read as being set before checking the status register for master disable. Reported-by: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Fix FCRTH value in VM-to-VM loopback modeMark Rustad1-3/+4
The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what the value should be set to. It has now been determined that the correct value is RXPBSIZE - (24*1024). This setting is also required for later devices. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Only clear adapter_stopped if ixgbe_setup_fc succeededMark Rustad1-3/+3
A logic error here results in the adapter_stopped flag only being cleared when ixgbe_setup_fc returns an error. Correct the logic. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Update ixgbe_disable_pcie_master flow for X550*Mark Rustad1-0/+3
This patch skips the PCI transactions pending check in ixgbe_disable_pcie_master. This is done to addresses a known HW issue where the PCI transactions pending bit sticks high when there are pending transactions. HW engineering instructed to workaround this issue by wait and then continue with our reset flow. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Add X550EM_x dual-speed SFP+ supportMark Rustad1-0/+210
This patch adds X550EM_x SFP+ dual-speed support. 82599 fiber link code was moved from ixgbe_82599.c to ixgbe_common.c for use by X550EM. SFP MAC link code is added to x550EM. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add new function to check for management presenceDon Skidmore1-0/+15
This patch adds a support function that will indicate for the existence of management FW. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: fix bug in not clearing counters for X550 devicesDon Skidmore1-1/+1
This check was missed in when this new MAC type was added. Since these counts can be incremented for X550 we need to clear them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: add support for WoL and autoneg FC for some X550 devicesDon Skidmore1-0/+2
These Device ID could support both WoL and autoneg flow control. In the case of WoL this is indicated by the eeprom. This patch enables these devices this support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: add array of MAC type dependent valuesDon Skidmore1-27/+32
Some of the register addresses and format where unfortunately changed between MAC types. To get around this we add a const u32 *mvals pointer to the ixgbe_hw struct to point to an array of mac-type-dependent values. These can include register offsets, masks, whatever can be in a u32. When the ixgbe_hw struct is initialized, a pointer to the appropriate array must be set. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbe: enable relaxed ordering for SPARCJeff Kirsher1-2/+6
This patch makes sure that relaxed ordering is not disabled when on SPARC, where it helps with performance. CC: <kernel-team@fb.com> CC: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2015-03-13ixgbe: add new wrapper for X550 supportDon Skidmore1-2/+46
For the X550 mac type we have to do additional steps around enabling/disabling Rx. This patch will add a layer of indirection around these support functions to enable this. CC: <kernel-team@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add X550 support function pointersDon Skidmore1-3/+3
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: cleanup checksum to allow error resultsDon Skidmore1-32/+54
Currently the shared code checksum calculation function only returns a u16 and cannot return an error code. Unfortunately a variety of errors can happen that completely prevent the calculation of a checksum. So, change the function return value from a u16 to an s32 and return a negative value on error, or the positive checksum value when there is no error. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add x550 SW/FW semaphore supportDon Skidmore1-2/+2
The X550 hardware will use more bits in the mask, so change the prototypes to match. This larger mask will require changes in callers which use the higher bits. Likewise since X550 will use different semaphore mask values and will use the lan_id value. So save these values in the ixgbe_phy_info struct. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add timeout parameter to ixgbe_host_interface_commandDon Skidmore1-10/+31
Since on X550 we use host interface commands to read,write and erase some commands require more time to complete. So this adds a timeout parameter to ixgbe_host_interface_command as wells as a return_data parameter allowing us to return with any data. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11ixgbe: Add new support for X550 MAC'sDon Skidmore1-9/+21
This patch will add in the new MAC defines and fit it into the switch cases throughout the driver. New functionality and enablement support will be added in following patches. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11ixgbe: fix X540 Completion timeoutDon Skidmore1-1/+19
On topologies including few levels of PCIe switching X540 can run into an unexpected completion error. We get around this by waiting after enabling loopback a sufficient amount of time until Tx Data Fetch is sent. We then poll the pending transaction bit to ensure we received the completion. Only then do we go on to clear the buffers. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Make return values more directMark Rustad1-335/+239
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Convert some udelays to usleep_rangeMark Rustad1-3/+3
Convert some udelay calls to the preferred usleep_range. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-13ixgbe: remove unnecessary break after gotoFabian Frederick1-2/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23ixgbe: add braces around else blockJacob Keller1-2/+2
This commit fixes a checkpatch.pl warning for style, by adding braces around the else block, since the if block requires braces. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix several concatenated strings to single lineJacob Keller1-11/+6
This patch fixes various log strings that are split over multiple lines in the ixgbe driver. This cleans up checkpatch.pl warnings, and makes it easier to search the code for warning strings displayed to the kernel log. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-12/+12
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/intel/igb/e1000_mac.c net/core/filter.c Both conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22ixgbe: convert low_water into an arrayJacob Keller1-13/+22
Since fc.high_water is an array, we should treat low_water as an array also. This allows the algorithm to output different values for different TCs, and then we can distinguish between them. In addition, this patch changes one path that didn't honor the return value from ixgbe_setup_fc. Reported-by: Aaron Salter <aaron.k.salter@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-18e1000e/igb/ixgbe/i40e: fix message terminationsJakub Kicinski1-1/+1
Add \n at the end of messages where missing, remove all \r. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbe: Break recursion in case of removalMark Rustad1-0/+3
When an adapter is removed and registers all read as all one's, an infinite recursion can happen between ixgbe_clear_vmdq_generic and ixgbe_clear_rar_generic. Adding a check for removal breaks this recursion. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: use ixgbe_read_pci_cfg_wordJacob Keller1-8/+3
This patch replaces some direct uses of pci_read_config_word with the protected ixgbe_read_pci_cfg_word function, which checks for whether the adapter is removed when LER is enabled. We shouldn't use the pci_read_config_word calls directly because of these checks. This patch also cleans up an unnecessary save of a pointer to the mac object, as our standard style is to just use the hw pointer. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: remove unused media typeJacob Keller1-3/+0
This patch reverts the addition of the fiber_fixed type, which ended up never being used. We don't have plans to support this type going forward, and there is no reason to keep an unused type around polluting the code. Reverts: 4e8e1bca6e2 ("ixgbe: add new media type") CC: Arun Sharma <asharma@fb.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: fix errors related to protected AUTOC callsDon Skidmore1-5/+5
Found several incorrect conditionals after calling the prot_autoc_* functions. Likewise we weren't always freeing the FWSW semaphore after grabbing it. This would lead to DA cables being unable to link along with possible other errors. CC: Arun Sharma <asharma@fb.com> CC: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller1-0/+1
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-02ixgbe: Check config reads for removalMark Rustad1-7/+9
Configuration space reads should also be checked for removal. So add some checks related to config space accesses. v2: * Fixed indent Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore1-59/+59
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: fix to use correct timeout interval for memory read completionDon Skidmore1-2/+52
Currently we were just always polling for a hard coded 80 ms and not respecting the system-wide timeout interval. Since up until now all devices have been tested with this 80ms value we continue to use this value as a hard minimum. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad1-22/+45
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-31ixgbe: clear semaphore bits on timeoutsEmil Tantilov1-24/+21
This patch changes the error code path in ixgbe_acquire_swfw_sync() to deal with cases where acquiring SW semaphore times out. In cases where the SW/FW semaphore bits were set (i.e. due to a crash) the driver will hang on load. With this patch the driver will clear the stuck bits if the semaphore was not acquired in the allotted time. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-30ixgbe: add new media type.Don Skidmore1-0/+3
This patch adds support for a new media type fiber_fixed. This is useful to avoid all the SFP+ hot plug support path on devices who's fix fiber need not worry about such things. This patch is needed for a following patch that adds support for "fiber_fixed" devices. v2: cleaned up logging message based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-30ixgbe: fix fc autoneg ethtool reporting.Don Skidmore1-9/+33
Originally ixgbe_device_supports_autoneg_fc() was only expected to be called by copper devices. This would lead to false information to be displayed via ethtool. v2: changed ixgbe_device_supports_autoneg_fc() to a bool function, it returns bool. Based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: create conversion functions from link_status to bus/speedJacob Keller1-32/+32
This patch cleans up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in a follow on patch that needs to convert between the link_status PCIe config values into ixgbe's internal enum representations. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: Enable support for recognizing PCI-e Gen3 link speedJacob Keller1-0/+3
This patch adds support for displaying PCIe Gen3 link speed, which was previously missing from the driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: don't do arithmetic operations on bitmasksEmil Tantilov1-1/+1
Make the calculation of eerd consistent between the read and write functions by using | instead of + for IXGBE_EEPROM_RW_REG_START Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06ixgbe: Use is_valid_ether_addrJoe Perches1-25/+1
Use the normal kernel test instead of a module specific one. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22ixgbe: ethtool correctly identify autoneg settingJacob Keller1-2/+1
This patch enables ethtool to correctly identify flow control (pause frame) auto negotiation, as well as disallow enabling it when it is not supported. The ixgbe_device_supports_autoneg_fc function is exported and used for this purpose. There is also one minor cleanup of the device_supports_autoneg_fc by removing an unnecessary return statement. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-29ixgbe: Add support for pipeline resetDon Skidmore1-3/+67
Calling the ixgbe_reset_pipeline_82599 function will ensure a full pipeline reset on all 82599 devices. This is necessary to avoid possible link issues. Since this patch accomplishes this by modifying AUTOC.LMS we need to wrap all AUTOC writes when LESM is enabled. v2- fix LMS behaviour based on feedback by Martin Josefsson CC: Martin Josefsson <gandalf@mjufs.se> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22ixgbe: using is_zero_ether_addr() to simplify the codeWei Yongjun1-2/+1
Using is_zero_ether_addr() to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: add support for X540-AT1joshua.a.hay@intel.com1-0/+1
This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 20:40:29 +0000