summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igc
AgeCommit message (Collapse)AuthorFilesLines
2021-05-14igc: use XDP helpersMatteo Croce1-6/+3
Make use of the xdp_{init,prepare}_buff() helpers instead of an open-coded version. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16igc: Expose LPI countersSasha Neftin1-0/+2
Expose EEE Tx and Rx low power idle counters via ethtool A EEE TX or RX LPI event occurs when the transmitter or the receiver enters EEE (IEEE802.3az) LPI state. ethtool --statistics <iface> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igc: Fix overwrites return valueSasha Neftin1-2/+2
drivers/net/ethernet/intel/igc/igc_i225.c:235 igc_write_nvm_srwr() warn: loop overwrites return value 'ret_val' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igc: enable auxiliary PHC functions for the i225Ederson de Souza5-3/+405
The i225 device offers a number of special PTP Hardware Clock features on the Software Defined Pins (SDPs) - much like i210, which is used as inspiration for this patch. It enables two possible functions, namely time stamping external events and periodic output signals. The assignment of PHC functions to the four SDP can be freely chosen by the user. For the external events time stamping, when the SDP (configured as input by user) level changes, an interrupt is generated and the kernel Precision Time Protocol (PTP) is informed. For the periodic output signals, the i225 is configured to generate them (so the SDP level will change periodically) and the driver also has to keep updating the time of the next level change. However, this work is not necessary for some frequencies as the i225 takes care of them (namely, anything with a half-cycle of 500ms, 250ms, 125ms or < 70ms). While i225 allows up to four timers to be used to source the time used on the external events or output signals, this patch uses only one of those timers. Main reason is to keep it simple, as it's not clear how these extra timers would be exposed to users. Note that currently a NIC can expose a single PTP device. Signed-off-by: Ederson de Souza <ederson.desouza@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igc: Enable internal i225 PPSEderson de Souza3-1/+37
The i225 device can produce one interrupt on the full second, much like i210 - from where this patch is inspired. This patch sets up the full second interruption on the i225 and when receiving it, it sends a PPS event to PTP (Precision Time Protocol) kernel subsystem. The PTP subsystem exposes the PPS events via ioctl and sysfs, and one can use the `testptp` tool (tools/testing/selftests/ptp) to check that the events are being generated. Signed-off-by: Ederson de Souza <ederson.desouza@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Add support for XDP_REDIRECT actionAndre Guedes1-11/+73
Add support for the XDP_REDIRECT action which enables XDP programs to redirect packets arriving at I225 NIC. It also implements the ndo_xdp_xmit ops, enabling the igc driver to transmit packets forwarded to it by xdp programs running on other interfaces. The patch tweaks the driver's page counting and recycling scheme as described in the following two commits and implemented by other Intel drivers in order to properly support XDP_REDIRECT action: commit 8ce29c679a6e ("i40e: tweak page counting for XDP_REDIRECT") commit 75aab4e10ae6 ("i40e: avoid premature Rx buffer reuse") This patch has been tested with the sample apps "xdp_redirect_cpu" and "xdp_redirect_map" located in samples/bpf/. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Add support for XDP_TX actionAndre Guedes4-11/+204
Add support for XDP_TX action which enables XDP programs to transmit back receiving frames. I225 controller has only 4 Tx hardware queues. Since XDP programs may not even issue an XDP_TX action, this patch doesn't reserve dedicated queues just for XDP like other Intel drivers do. Instead, the queues are shared between the network stack and XDP. The netdev queue lock is used to ensure mutual exclusion. Since frames can now be transmitted via XDP_TX, the igc_tx_buffer structure is modified so we are able to save a reference to the xdp frame for later clean up once the packet is transmitted. The tx_buffer is mapped to either a skb or a xdpf so we use a union to save the skb or xdpf pointer and have a bit in tx_flags to indicate which field to use. This patch has been tested with the sample app "xdp2" located in samples/bpf/ dir. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Add initial XDP supportAndre Guedes5-12/+153
Add the initial XDP support to the igc driver. For now, only XDP_PASS, XDP_DROP, XDP_ABORTED actions are supported. Upcoming patches will add support for the remaining XDP actions. XDP configuration helpers are defined in a new file, igc_xdp.c. These helpers are utilized in igc_main.c to implement the ndo_bpf callback. XDP-related code that belongs to the driver's hot path is landed in igc_main.c. By default, the driver uses Rx buffers with 2 KB size. When XDP is enabled, it uses larger buffers so we have enough space to accommodate the headroom and tailroom required by XDP infrastructure. Also, the driver doesn't support XDP functionality with frames that span over multiple buffers so jumbo frames are not allowed for now. The approach implemented follows the approach implemented in other Intel drivers as much as possible for the sake of consistency across the drivers. Quick comment regarding igc_build_skb(): this patch doesn't touch it because the function is never called. It seems its support is incomplete/in progress. The function was added by commit 0507ef8a0372b ("igc: Add transmit and receive fastpath and interrupt handlers") but ring_uses_build_skb() always return False since the IGC_RING_FLAG_RX_ BUILD_SKB_ENABLED isn't set anywhere in the driver code. This patch has been tested with the sample app "xdp1" located in samples/bpf/ dir. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Add set/clear large buffer helpersAndre Guedes1-0/+4
While commit 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") introduced code to handle larger packet buffers, it missed the set/clear helpers which enable/disable that feature. Introduce the missing helpers which will be use in the next patch. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Refactor Rx timestamp handlingAndre Guedes3-24/+34
Refactor the Rx timestamp handling in preparation to land XDP support. Rx timestamps are put in the Rx buffer by hardware, before the packet data. When creating the xdp buffer, we will need to check the Rx descriptor to determine if the buffer contains timestamp information and consider the offset when setting xdp.data. The Rx descriptor check is already done in igc_construct_skb(). To avoid code duplication, this patch moves the timestamp handling to igc_clean_rx_irq() so both skb and xdp paths can reuse it. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Introduce igc_get_rx_frame_truesize() helperAndre Guedes1-11/+18
The RX frame truesize calculation is scattered throughout the RX code. This patch creates the helper function igc_get_rx_frame_truesize() and uses it where applicable. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Introduce igc_rx_buffer_flip() helperAndre Guedes1-22/+21
The igc driver implements the same page recycling scheme from other Intel drivers which reuses the page by flipping the buffer. The code to handle buffer flips is duplicated in many locations so introduce the igc_rx_buffer_flip() helper and use it where applicable. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29igc: Remove unused argument from igc_tx_cmd_type()Andre Guedes1-2/+2
The 'skb' argument from igc_tx_cmd_type() is not used so remove it. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-36/+54
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23igc: Fix prototype warningSasha Neftin1-1/+1
Correct report warnings in igc_i225.c Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Assign boolean values to a bool variableJiapeng Zhong1-8/+8
Fix the following coccicheck warnings: ./drivers/net/ethernet/intel/igc/igc_main.c:4961:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4955:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4933:1-13: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4592:1-24: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4438:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4396:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4018:2-25: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_LOOPBACKSasha Neftin1-1/+0
MII_CR_LOOPBACK masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_SPEEDSasha Neftin1-3/+0
Force PHY speed not supported for i225 devices. MII_CR_SPEED masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_RESETSasha Neftin1-1/+0
MII_CR_RESET mask not in use in i225 device and can be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: Fix igc_ptp_rx_pktstamp()Andre Guedes2-33/+41
The comment describing the timestamps layout in the packet buffer is wrong and the code is actually retrieving the timestamp in Timer 1 reference instead of Timer 0. This hasn't been a big issue so far because hardware is configured to report both timestamps using Timer 0 (see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp() helper). This patch fixes the comment and the code so we retrieve the timestamp in Timer 0 reference as expected. This patch also takes the opportunity to get rid of the hw.mac.type check since it is not required. Fixes: 81b055205e8ba ("igc: Add support for RX timestamping") Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: Fix Supported Pause Frame Link SettingMuhammad Husaini Zulkifli1-0/+3
The Supported Pause Frame always display "No" even though the Advertised pause frame showing the correct setting based on the pause parameters via ethtool. Set bit in link_ksettings to "Supported" for Pause Frame. Before output: Supported pause frame use: No Expected output: Supported pause frame use: Symmetric Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: Fix Pause Frame AdvertisingMuhammad Husaini Zulkifli1-3/+1
Fix Pause Frame Advertising when getting the advertisement via ethtool. Remove setting the "advertising" bit in link_ksettings during default case when Tx and Rx are in off state with Auto Negotiate off. Below is the original output of advertisement link during Tx and Rx off: Advertised pause frame use: Symmetric Receive-only Expected output: Advertised pause frame use: No Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: reinit_locked() should be called with rtnl_lockSasha Neftin1-0/+9
This commit applies to the igc_reset_task the same changes that were applied to the igb driver in commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock") and fix possible race in reset subtask. Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-10net: add a helper to avoid issues with HW TX timestamping and SO_TXTIMEVladimir Oltean1-1/+1
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware timestamping on TX queues with tc-etf enabled"), hardware TX timestamping requires an skb with skb->tstamp = 0. When a packet is sent with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp, so the drivers need to explicitly reset skb->tstamp to zero after consuming the TX time. Create a helper named skb_txtime_consumed() which does just that. All drivers which offload TC_SETUP_QDISC_ETF should implement it, and it would make it easier to assess during review whether they do the right thing in order to be compatible with hardware timestamping or not. Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-04Merge branch '1GbE' of ↵Jakub Kicinski9-9/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-02-03 This series contains updates to igc, igb, e1000e, and e1000 drivers. Sasha adds counting of good transmit packets and reporting of NVM version and gPHY version in ethtool firmware version. Replaces the use of strlcpy to the preferred strscpy. Fixes a typo that caused the wrong register to be output. He also removes an unused function pointer, some unneeded defines, and a non-applicable comment. All changes for igc. Gal Hammer fixes a typo which caused the RDBAL register values to be shown instead of TDBAL for igb. Nick Lowe enables RSS support for i211 devices for igb. Tom Rix fixes checkpatch warning by removing h from printk format specifier for igb. Kaixu Xia removes setting of a variable that is overwritten before next use for e1000e. Sudip Mukherjee removes an unneeded assignment for e1000. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: drop unneeded assignment in e1000_set_itr() e1000e: remove the redundant value assignment in e1000_update_nvm_checksum_spt igb: remove h from printk format specifier igb: Enable RSS for Intel I211 Ethernet Controller igb: fix TDBAL register show incorrect value igc: Fix TDBAL register show incorrect value igc: Remove unused FUNC_1 mask igc: Remove unused local receiver mask igc: Prefer strscpy over strlcpy igc: Expose the gPHY firmware version igc: Expose the NVM version igc: Add Host Good Packets Transmitted Count igc: Remove MULR mask define igc: Remove igc_set_fw_version comment igc: Clean up nvm_operations structure ==================== Link: https://lore.kernel.org/r/20210204004259.3662059-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: use the new dev_page_is_reusable() instead of private versionsAlexander Lobakin1-7/+2
Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03igc: Fix TDBAL register show incorrect valueSasha Neftin1-1/+1
Fixed a typo which caused the registers dump function to read the RDBAL register when printing TDBAL register values. _reg_dump method has been partially derived from i210 and have same typo. Suggested-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Remove unused FUNC_1 maskSasha Neftin1-1/+0
FUNC_1 mask not in use in i225 device and could be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Remove unused local receiver maskSasha Neftin1-1/+0
Local receiver mask SR_1000T_LOCAL_RX_STATUS not in use in i225 device and could be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Prefer strscpy over strlcpySasha Neftin1-1/+1
Use the strscpy method instead of strlcpy method. See: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr _i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Expose the gPHY firmware versionSasha Neftin5-3/+28
Extend reporting of NVM image version to include the gPHY (i225 PHY) firmware version. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Expose the NVM versionSasha Neftin3-2/+17
Expose the NVM map version via drvinfo in ethtool NVM image version is reported as firmware version for i225 device Minor typo fix - remove space Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Add Host Good Packets Transmitted CountSasha Neftin1-0/+1
This counter counts the number of good (non-erred) packets transmitted sent by the host. A good transmit packet is considered one that is 64 or more bytes in length (from <Destination Address> through <CRC>, inclusively) in length Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Remove MULR mask defineSasha Neftin1-1/+0
Multiple Tx Data Read Requests is hardware pipeline feature and is not controlled by software Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Remove igc_set_fw_version commentSasha Neftin1-1/+0
i225 device not supported and do not plan to support configuration of fw version string for ethtool Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Clean up nvm_operations structureSasha Neftin1-1/+0
valid_led_default function pointer not in use and can be removed from nvm_operations structure. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-4/+4
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01igc: check return value of ret_val in igc_config_fc_after_link_upKevin Lo1-1/+1
Check return value from ret_val to make error check actually work. Fixes: 4eb8080143a9 ("igc: Add setup link functionality") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwrKevin Lo1-2/+1
This patch sets the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM write EEWR timeout. Fixes: ab4056126813 ("igc: Add NVM support") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng1-1/+2
Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+18
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26igc: fix link speed advertisingCorinna Vinschen1-6/+18
Link speed advertising in igc has two problems: - When setting the advertisement via ethtool, the link speed is converted to the legacy 32 bit representation for the intel PHY code. This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being beyond bit 31). As a result, any call to `ethtool -s ...' drops the 2500Mbit/s link speed from the PHY settings. Only reloading the driver alleviates that problem. Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the Intel PHY ADVERTISE_2500_FULL bit explicitly. - Rather than checking the actual PHY setting, the .get_link_ksettings function always fills link_modes.advertising with all link speeds the device is capable of. Fix this by checking the PHY autoneg_advertised settings and report only the actually advertised speeds up to ethtool. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-19net: igc: use skb_csum_is_sctp instead of protocol checkXin Long1-13/+1
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and yet it also makes igc support SCTP CRC checksum offload for UDP and GRE encapped packets, just as it does in igb driver. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10igc: Add new device IDSasha Neftin3-0/+3
Add new device ID for the next step of the silicon and reflect the I226_K part. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-10igc: Fix returning wrong statisticsVinicius Costa Gomes1-6/+8
'igc_update_stats()' was not updating 'netdev->stats', so the returned statistics, for example, requested by: $ ip -s link show dev enp3s0 were not being updated and were always zero. Fix by returning a set of statistics that are actually being updated (adapter->stats64). Fixes: c9a11c23ceb6 ("igc: Add netdev") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29net: intel: Remove in_interrupt() warningsSebastian Andrzej Siewior1-1/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28igc: Clean up nvm_info structureSasha Neftin1-3/+0
flash_bank_size and flash_base_addr field not in use and can be removed from a nvm_info structure Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Reject schedules with a base_time in the futureVinicius Costa Gomes1-2/+23
When we set the BASET registers of i225 with a base_time in the future, i225 will "hold" all packets until that base_time is reached, causing a lot of TX Hangs. As this behaviour seems contrary to the expectations of the IEEE 802.1Q standard (section 8.6.9, especially 8.6.9.4.5), let's start by rejecting these types of schedules. If this is too limiting, we can for example, setup a timer to configure the BASET registers closer to the start time, only blocking the packets for a "short" while. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Export a way to read the PTP timerVinicius Costa Gomes2-4/+4
The next patch will need a way to retrieve the current timestamp from the NIC's PTP clock. The 'i225' suffix is removed, if anything model specific is needed, those specifics should be hidden by this function. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igc: Remove reset disable flagSasha Neftin1-1/+0
Boolean reset disable flag not applicable for i225 device and could be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-24 05:07:35 +0000