summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igb
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01igb: Fix use-after-free error during resetVinicius Costa Gomes1-0/+2
Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc) Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reported-by: Erez Geva <erez.geva.ext@siemens.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24intel: Remove rcu_read_lock() around XDP program invocationToke Høiland-Jørgensen1-2/+0
The Intel drivers all have rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> # i40e Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20210624160609.292325-12-toke@redhat.com
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-37/+43
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03igb: add correct exception tracing for XDPMagnus Karlsson1-4/+6
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 9cbc948b5a20 ("igb: add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-03igb: Fix XDP with PTP enabledKurt Kanzenbach3-33/+37
When using native XDP with the igb driver, the XDP frame data doesn't point to the beginning of the packet. It's off by 16 bytes. Everything works as expected with XDP skb mode. Actually these 16 bytes are used to store the packet timestamps. Therefore, pull the timestamp before executing any XDP operations and adjust all other code accordingly. The igc driver does it like that as well. Tested with Intel i210 card and AF_XDP sockets. Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-01igb: Fix -Wunused-const-variable warningYueHaibing1-1/+1
If CONFIG_IGB_HWMON is n, gcc warns: drivers/net/ethernet/intel/igb/e1000_82575.c:2765:17: warning: ‘e1000_emc_therm_limit’ defined but not used [-Wunused-const-variable=] static const u8 e1000_emc_therm_limit[4] = { ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/e1000_82575.c:2759:17: warning: ‘e1000_emc_temp_data’ defined but not used [-Wunused-const-variable=] static const u8 e1000_emc_temp_data[4] = { ^~~~~~~~~~~~~~~~~~~ Move it into #ifdef block to fix this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26igb: override two checker warningsJesse Brandeburg1-2/+2
The igb PTP code was using htons() on a constant to try to byte swap the value before writing it to a register. This byte swap has the consequence of triggering sparse conflicts between the register write which expect cpu ordered input, and the code which generated a big endian constant. Just override the cast to make sure code doesn't change but silence the warning. Can't do a __swab16 in this case because big endian systems would then write the wrong value. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb: fix assignment on big endian machinesJesse Brandeburg1-2/+2
The igb driver was trying hard to be sparse correct, but somehow ended up converting a variable into little endian order and then tries to OR something with it. A much plainer way of doing things is to leave all variables and OR operations in CPU (non-endian) mode, and then convert to little endian only once, which is what this change does. This probably fixes a bug that might have been seen only on big endian systems. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb: handle vlan types with checker enabledJesse Brandeburg1-2/+3
The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too. Also change the vlan_tci assignment to override the sparse warning without changing functionality. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb/igc: use strongly typed pointerJesse Brandeburg1-1/+1
The igb and igc driver both use a trick of creating a local type pointer on the stack to ease dealing with a receive descriptor in 64 bit chunks for printing. Sparse however was not taken into account and receive descriptors are always in little endian order, so just make the unions use __le64 instead of u64. No functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26intel: remove checker warningJesse Brandeburg1-1/+1
The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igb: Add double-check MTA_REGISTER for i210 and i211Grzegorz Siwik1-0/+27
Add new function which checks MTA_REGISTER if its filled correctly. If not then writes again to same register. There is possibility that i210 and i211 could not accept MTA_REGISTER settings, specially when you add and remove many of multicast addresses in short time. Without this patch there is possibility that multicast settings will be not always set correctly in hardware. Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igb: Redistribute memory for transmit packet buffers when in Qav modeEderson de Souza2-6/+6
i210 has a total of 24KB of transmit packet buffer. When in Qav mode, this buffer is divided into four pieces, one for each Tx queue. Currently, 8KB are given to each of the two SR queues and 4KB are given to each of the two SP queues. However, it was noticed that such distribution can make best effort traffic (which would usually go to the SP queues when Qav is enabled, as the SR queues would be used by ETF or CBS qdiscs for TSN-aware traffic) perform poorly. Using iperf3 to measure, one could see the performance of best effort traffic drop by nearly a third (from 935Mbps to 578Mbps), with no TSN traffic competing. This patch redistributes the 24KB to each queue equally: 6KB each. On tests, there was no notable performance reduction of best effort traffic performance when there was no TSN traffic competing. Below, more details about the data collected: All experiments were run using the following qdisc setup: qdisc taprio 100: root refcnt 9 tc 4 map 3 3 3 2 3 0 0 3 3 3 3 3 3 3 3 3 queues offset 0 count 1 offset 1 count 1 offset 2 count 1 offset 3 count 1 clockid TAI base-time 0 cycle-time 10000000 cycle-time-extension 0 index 0 cmd S gatemask 0xf interval 10000000 qdisc etf 8045: parent 100:1 clockid TAI delta 1000000 offload on deadline_mode off skip_sock_check off TSN traffic, when enabled, had this characteristics: Packet size: 1500 bytes Transmission interval: 125us ---------------------------------- Without this patch: ---------------------------------- - TCP data: - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.35 GBytes 578 Mbits/sec 0 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.07 GBytes 460 Mbits/sec 1 - TCP data limiting iperf3 buffer size to 4K: - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.35 GBytes 579 Mbits/sec 0 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.08 GBytes 462 Mbits/sec 0 - TCP data limiting iperf3 buffer size to 192 bytes (smallest size without serious performance degradation): - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.34 GBytes 577 Mbits/sec 0 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.07 GBytes 461 Mbits/sec 1 - UDP data at 1000Mbit/sec: - No TSN traffic: [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-20.00 sec 1.36 GBytes 586 Mbits/sec 0.000 ms 0/1011407 (0%) - With TSN traffic: [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-20.00 sec 1.05 GBytes 451 Mbits/sec 0.000 ms 0/778672 (0%) ---------------------------------- With this patch: ---------------------------------- - TCP data: - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 0 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.50 GBytes 646 Mbits/sec 1 - TCP data limiting iperf3 buffer size to 4K: - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 2.17 GBytes 931 Mbits/sec 0 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0 - TCP data limiting iperf3 buffer size to 192 bytes (smallest size without serious performance degradation): - No TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 1 - With TSN traffic: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0 - UDP data at 1000Mbit/sec: - No TSN traffic: [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-20.00 sec 2.23 GBytes 956 Mbits/sec 0.000 ms 0/1650226 (0%) - With TSN traffic: [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-20.00 sec 1.51 GBytes 649 Mbits/sec 0.000 ms 0/1120264 (0%) Signed-off-by: Ederson de Souza <ederson.desouza@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-6/+5
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-24/+50
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23igb: Fix fall-through warnings for ClangGustavo A. R. Silva3-0/+3
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-23intel: clean up mismatched header commentsJesse Brandeburg2-4/+4
A bunch of header comments were showing warnings when compiling with W=1. Fix them all at once. This changes only comments. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igb: check timestamp validityJesse Brandeburg3-14/+32
Add a couple of checks to make sure timestamping is on and that the timestamp value from DMA is valid. This avoids any functional issues that could come from a misinterpreted time stamp. One of the functions changed doesn't need a return value added because there was no value in checking from the calling locations. While here, fix a couple of reverse christmas tree issues next to the code being changed. Fixes: f56e7bba22fa ("igb: Pull timestamp from fragment before adding it to skb") Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igb: Fix duplicate include guardTom Seewald1-3/+3
The include guard "_E1000_HW_H_" is used by two separate header files in two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the same include guard macro in more than one header file may cause unexpected behavior from the compiler. Fix this by renaming the duplicate guard in the igb driver. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Tom Seewald <tseewald@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi1-6/+5
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-03-17intel: Update drivers to use ethtool_sprintfAlexander Duyck1-26/+14
Update the Intel drivers to make use of ethtool_sprintf. The general idea is to reduce code size and overhead by replacing the repeated pattern of string printf statements and ETH_STRING_LEN counter increments. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15net: ethernet: intel: igb: Typo fix in the file igb_main.cBhaskar Chowdhury1-1/+1
s/structue/structure/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12igb: avoid premature Rx buffer reuseLi RongQing1-7/+15
Igb needs a similar fix as commit 75aab4e10ae6a ("i40e: avoid premature Rx buffer reuse") The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Longer explanation: Intel NICs have a recycle mechanism. The main idea is that a page is split into two parts. One part is owned by the driver, one part might be owned by someone else, such as the stack. t0: Page is allocated, and put on the Rx ring +--------------- used by NIC ->| upper buffer (rx_buffer) +--------------- | lower buffer +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX t1: Buffer is received, and passed to the stack (e.g.) +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 1 t2: Buffer is received, and redirected +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- Now, prior calling xdp_do_redirect(): page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 2 This means that buffer *cannot* be flipped/reused, because the skb is still using it. The problem arises when xdp_do_redirect() actually frees the segment. Then we get: page count == USHRT_MAX - 1 rx_buffer->pagecnt_bias == USHRT_MAX - 2 From a recycle perspective, the buffer can be flipped and reused, which means that the skb data area is passed to the Rx HW ring! To work around this, the page count is stored prior calling xdp_do_redirect(). Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-10net: add a helper to avoid issues with HW TX timestamping and SO_TXTIMEVladimir Oltean1-1/+1
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware timestamping on TX queues with tc-etf enabled"), hardware TX timestamping requires an skb with skb->tstamp = 0. When a packet is sent with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp, so the drivers need to explicitly reset skb->tstamp to zero after consuming the TX time. Create a helper named skb_txtime_consumed() which does just that. All drivers which offload TC_SETUP_QDISC_ETF should implement it, and it would make it easier to assess during review whether they do the right thing in order to be compatible with hardware timestamping or not. Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-04Merge branch '1GbE' of ↵Jakub Kicinski1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-02-03 This series contains updates to igc, igb, e1000e, and e1000 drivers. Sasha adds counting of good transmit packets and reporting of NVM version and gPHY version in ethtool firmware version. Replaces the use of strlcpy to the preferred strscpy. Fixes a typo that caused the wrong register to be output. He also removes an unused function pointer, some unneeded defines, and a non-applicable comment. All changes for igc. Gal Hammer fixes a typo which caused the RDBAL register values to be shown instead of TDBAL for igb. Nick Lowe enables RSS support for i211 devices for igb. Tom Rix fixes checkpatch warning by removing h from printk format specifier for igb. Kaixu Xia removes setting of a variable that is overwritten before next use for e1000e. Sudip Mukherjee removes an unneeded assignment for e1000. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: drop unneeded assignment in e1000_set_itr() e1000e: remove the redundant value assignment in e1000_update_nvm_checksum_spt igb: remove h from printk format specifier igb: Enable RSS for Intel I211 Ethernet Controller igb: fix TDBAL register show incorrect value igc: Fix TDBAL register show incorrect value igc: Remove unused FUNC_1 mask igc: Remove unused local receiver mask igc: Prefer strscpy over strlcpy igc: Expose the gPHY firmware version igc: Expose the NVM version igc: Add Host Good Packets Transmitted Count igc: Remove MULR mask define igc: Remove igc_set_fw_version comment igc: Clean up nvm_operations structure ==================== Link: https://lore.kernel.org/r/20210204004259.3662059-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: use the new dev_page_is_reusable() instead of private versionsAlexander Lobakin1-7/+2
Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03igb: remove h from printk format specifierTom Rix1-1/+1
This change fixes the checkpatch warning described in this commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igb: Enable RSS for Intel I211 Ethernet ControllerNick Lowe1-2/+1
The Intel I211 Ethernet Controller supports 2 Receive Side Scaling (RSS) queues. It should not be excluded from having this feature enabled. Via commit c883de9fd787 ("igb: rename igb define to be more generic") E1000_MRQC_ENABLE_RSS_4Q was renamed to E1000_MRQC_ENABLE_RSS_MQ to indicate that this is a generic bit flag to enable queues and not a flag that is specific to devices that support 4 queues The bit flag enables 2, 4 or 8 queues appropriately depending on the part. Tested with a multicore CPU and frames were then distributed as expected. This issue appears to have been introduced because of confusion caused by the prior name. Signed-off-by: Nick Lowe <nick.lowe@gmail.com> Tested-by: David Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igb: fix TDBAL register show incorrect valueGal Hammer1-1/+1
Fixed a typo which caused the registers dump function to read the RDBAL register when printing TDBAL register values. Signed-off-by: Gal Hammer <ghammer@redhat.com> Tested-by: David Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-19net: igb: use skb_csum_is_sctp instead of protocol checkXin Long1-13/+1
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and there is no need to parse the packet to check its proto field, especially when it's a UDP or GRE encapped packet. So this patch also makes igb support SCTP CRC checksum offload for UDP and GRE encapped packets. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi1-6/+6
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi1-3/+3
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-11/+31
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09igb: avoid transmit queue timeout in xdp pathSven Auhagen1-0/+5
Since we share the transmit queue with the network stack, it is possible that we run into a transmit queue timeout. This will reset the queue. This happens under high load when XDP is using the transmit queue pretty much exclusively. netdev_start_xmit() sets the trans_start variable of the transmit queue to jiffies which is later utilized by dev_watchdog(), so to avoid timeout, let stack know that XDP xmit happened by bumping the trans_start within XDP Tx routines to jiffies. Fixes: 9cbc948b5a20 ("igb: add XDP support") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: use xdp_do_flushSven Auhagen1-1/+1
Since it is a new XDP implementation change xdp_do_flush_map to xdp_do_flush. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: skb add metasize for xdpSven Auhagen1-0/+4
add metasize if it is set in xdp Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: XDP extack message on errorSven Auhagen1-5/+12
Add an extack error message when the RX buffer size is too small for the frame size. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: take VLAN double header into accountSven Auhagen2-4/+8
Increase the packet header padding to include double VLAN tagging. This patch uses a macro for this. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: XDP xmit back fix error codeSven Auhagen1-1/+1
The igb XDP xmit back function should only return defined error codes. Fixes: 9cbc948b5a20 ("igb: add XDP support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel1-1/+1
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-09-29net: intel: Remove in_interrupt() warningsSebastian Andrzej Siewior1-1/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28igb: read PBA number from flashGal Hammer1-1/+3
Fixed flash presence check for 82576 controllers so the part number string is read and displayed correctly. Signed-off-by: Gal Hammer <ghammer@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28igb: add XDP supportSven Auhagen3-36/+481
Add XDP support to the IGB driver. The implementation follows the IXGBE XDP implementation closely and I used the following patches as basis: 1. commit 924708081629 ("ixgbe: add XDP support for pass and drop actions") 2. commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") 3. commit ed93a3987128 ("ixgbe: tweak page counting for XDP_REDIRECT") Due to the hardware constraints of the devices using the IGB driver we must share the TX queues with XDP which means locking the TX queue for XDP. I ran tests on an older device to get better numbers. Test machine: Intel(R) Atom(TM) CPU C2338 @ 1.74GHz (2 Cores) 2x Intel I211 Routing Original Driver Network Stack: 382 Kpps Routing XDP Redirect (xdp_fwd_kern): 1.48 Mpps XDP Drop: 1.48 Mpps Using XDP we can achieve line rate forwarding even on an older Intel Atom CPU. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg6-22/+27
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+0
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-26net: Take common prefetch code structure into a functionTariq Toukan1-8/+2
Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+0
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+9
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30igb: use eth_zero_addr() to clear mac addressMiaohe Lin1-2/+2
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-30igb: Remove unnecessary usages of memsetSuraj Upadhyay1-2/+2
Replace memsets of 1 byte with simple assignment. Issue found with checkpatch.pl Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-26 13:48:43 +0000