summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)AuthorFilesLines
2021-10-11ice: implement low level recipes functionsGrishma Kotecha2-0/+212
Add code to manage recipes and profiles on admin queue layer. Allow the driver to add a new recipe and update an existing one. Get a recipe and get a recipe to profile association is mostly used in update existing recipes code. Only default recipes can be updated. An update is done by reading recipes from HW, changing their params and calling add recipe command. Support following admin queue commands: - ice_aqc_opc_add_recipe (0x0290) - create a recipe with protocol header information and other details that determine how this recipe filter works - ice_aqc_opc_recipe_to_profile (0x0291) - associate a switch recipe to a profile - ice_aqc_opc_get_recipe (0x0292) - get details of an existing recipe - ice_aqc_opc_get_recipe_to_profile (0x0293) - get a recipe associated with profile ID Define ICE_AQC_RES_TYPE_RECIPE resource type to hold a switch recipe. It is needed when a new switch recipe needs to be created. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: add port representor ethtool ops and statsWojciech Drewek6-7/+118
Introduce the following ethtool operations for VF's representor: -get_drvinfo -get_strings -get_ethtool_stats -get_sset_count -get_link In all cases, existing operations were used with minor changes which allow us to detect if ethtool op was called for representor. Only VF VSI stats will be available for representor. Implement ndo_get_stats64 for port representor. This will update VF VSI stats and read them. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: switchdev slow pathGrzegorz Nitka6-1/+156
Slow path means allowing packet to go from uplink to representor and from representor to correct VF on Rx site and from VF to representor and to uplink on Tx site. To accomplish this driver, has to set correct Tx descriptor. When packet is sent from representor to VF, destination should be set to VF VSI. When packet is sent from uplink port destination should be uplink to bypass switch infrastructure and send packet outside. On Rx site driver should check source VSI field from Rx descriptor and based on that forward packed to correct netdev. To allow this there is a target netdevs table in control plane VSI struct. Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: rebuild switchdev when resetting all VFsGrzegorz Nitka6-1/+130
As resetting all VFs behaves mostly like creating new VFs also eswitch infrastructure has to be recreated. The easiest way to do that is to rebuild eswitch after resetting VFs. Implement helper functions to start and stop all representors queues. This is used to disable traffic on port representors. In rebuild path: - NAPI has to be disabled - eswitch environment has to be set up - new port representors have to be created, because the old one had pointer to not existing VFs - new control plane VSI ring should be remapped - NAPI hast to be enabled - rxdid has to be set to FLEX_NIC_2, because this descriptor id support source_vsi, which is needed on control plane VSI queues - port representors queues have to be started Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: enable/disable switchdev when managing VFsGrzegorz Nitka4-2/+63
Only way to enable switchdev is to create VFs when the eswitch mode is set to switchdev. Check if correct mode is set and enable switchdev in function which creating VFs. Disable switchdev when user change number of VFs to 0. Changing eswitch mode back to legacy when VFs are created in switchdev mode isn't allowed. As switchdev takes care of managing filter rules, adding new rules on VF is blocked. In case of resetting VF driver has to update pointer in ice_repr struct, because after reset VSI related things can change. Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: introduce new type of VSI for switchdevGrzegorz Nitka6-3/+92
New type of VSI has to be defined for switchdev control plane VSI. Number of allocated Tx and Rx queue has to be equal to amount of VFs, because each port representor should have one Tx and Rx queue. Also to not increase number of used irqs too much, control plane VSI uses only one q_vector and handle all queues in one irq. To allow handling all queues in one irq , new function to clean msix for eswitch was introduced. This function will schedule napi for each representor instead of scheduling it only for one like in normal clean irq function. Only one additional msix has to be requested. Always try to request it in ice_ena_msix_range function. Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: set and release switchdev environmentGrzegorz Nitka6-13/+453
Switchdev environment has to be set up when user create VFs and eswitch mode is switchdev. Release is done when user delete all VFs. Data path in this implementation is based on control plane VSI. This VSI is used to pass traffic from port representors to corresponding VFs and vice versa. Default TX rule has to be added to forward packet to control plane VSI. This will redirect packets from VFs which don't match other rules to control plane VSI. On RX side default rule is added on uplink VSI to receive all traffic that doesn't match other rules. When setting switchdev environment all other rules from VFs should be removed. Packet to VFs will be forwarded by control plane VSI. As VF without any mac rules can't send any packet because of antispoof mechanism, VSI antispoof should be turned off on each VFs. To send packet from representor to correct VSI, destination VSI field in TX descriptor will have to be filled. Allow that by setting destination override bit in control plane VSI security config. Packet from VFs will be received on control plane VSI. Driver should decide to which netdev forward the packet. Decision is made based on src_vsi field from descriptor. There is a target netdev list in control plane VSI struct which choose netdev based on src_vsi number. Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: allow changing lan_en and lb_en on dflt rulesMichal Swiatkowski4-1/+94
There is no way to change default lan_en and lb_en flags while adding new rule. Add function that allows changing these flags on ICE_SW_LKUP_DFLT recipe and any rule id. lan_en allows packet to go outside if rule is matched. Clearing this bit will block packet from sending it outside. lb_en allows packet to be forwarded to other VSI. Clearing this bit will block packet from forwarding it to other VSI. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: manage VSI antispoof and destination overrideMichal Swiatkowski2-0/+73
Implement functions to make setting VSI security config easier. Main function ice_update_security fills security section field and checks against error in updating VSI. Reset functions are responsible for correct filling config according to user expectations. This helper is needed because destination override is located in this section. Driver has to set this bit to allow strering Tx packet on VSI based on value in Tx descriptors. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: allow process VF opcodes in different waysMichal Swiatkowski3-37/+225
In switchdev driver shouldn't add MAC, VLAN and promisc filters on iavf demand but should return success to not break normal iavf flow. Achieve that by creating table of functions pointer with default functions used to parse iavf command. While parse iavf command, call correct function from table instead of calling function direct. When port representors are being created change functions in table to new one that behaves correctly for switchdev puprose (ignoring new filters). Change back to default ops when representors are being removed. Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: introduce VF port representorMichal Swiatkowski6-2/+286
Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: Move devlink port to PF/VF structWojciech Drewek7-37/+103
Keeping devlink port inside VSI data structure causes some issues. Since VF VSI is released during reset that means that we have to unregister devlink port and register it again every time reset is triggered. With the new changes in devlink API it might cause deadlock issues. After calling devlink_port_register/devlink_port_unregister devlink API is going to lock rtnl_mutex. It's an issue when VF reset is triggered in netlink operation context (like setting VF MAC address or VLAN), because rtnl_lock is already taken by netlink. Another call of rtnl_lock from devlink API results in dead-lock. By moving devlink port to PF/VF we avoid creating/destroying it during reset. Since this patch, devlink ports are created during ice_probe, destroyed during ice_remove for PF and created during ice_repr_add, destroyed during ice_repr_rem for VF. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: support basic E-Switch mode controlMichal Swiatkowski5-0/+102
Write set and get eswitch mode functions used by devlink ops. Use new pf struct member eswitch_mode to track current eswitch mode in driver. Changing eswitch mode is only allowed when there are no VFs created. Create new file for eswitch related code. Add config flag ICE_SWITCHDEV to allow user to choose if switchdev support should be enabled or disabled. Use case examples: - show current eswitch mode ('legacy' is the default one) [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode legacy - move to 'switchdev' mode [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode switchdev [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode switchdev - create 2 VFs [root@localhost]# echo 2 > /sys/class/net/ens4f1/device/sriov_numvfs - unsuccessful attempt to change eswitch mode while VFs are created [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy devlink answers: Operation not supported - destroy VFs [root@localhost]# echo 0 > /sys/class/net/ens4f1/device/sriov_numvfs - restore 'legacy' mode [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode legacy Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-2/+2
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-60/+48
Daniel Borkmann says: ==================== bpf-next 2021-10-02 We've added 85 non-merge commits during the last 15 day(s) which contain a total of 132 files changed, 13779 insertions(+), 6724 deletions(-). The main changes are: 1) Massive update on test_bpf.ko coverage for JITs as preparatory work for an upcoming MIPS eBPF JIT, from Johan Almbladh. 2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool, with driver support for i40e and ice from Magnus Karlsson. 3) Add legacy uprobe support to libbpf to complement recently merged legacy kprobe support, from Andrii Nakryiko. 4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky. 5) Support saving the register state in verifier when spilling <8byte bounded scalar to the stack, from Martin Lau. 6) Add libbpf opt-in for stricter BPF program section name handling as part of libbpf 1.0 effort, from Andrii Nakryiko. 7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov. 8) Fix skel_internal.h to propagate errno if the loader indicates an internal error, from Kumar Kartikeya Dwivedi. 9) Fix build warnings with -Wcast-function-type so that the option can later be enabled by default for the kernel, from Kees Cook. 10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it otherwise errors out when encountering them, from Toke Høiland-Jørgensen. 11) Teach libbpf to recognize specialized maps (such as for perf RB) and internally remove BTF type IDs when creating them, from Hengqi Chen. 12) Various fixes and improvements to BPF selftests. ==================== Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28ice: Prefer kcalloc over open coded arithmeticLen Baker1-1/+1
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic sizes: both sides of the multiplication are constant values. However it is best to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix macro name for IPv4 fragment flagJeff Guo2-2/+2
In IPv4 header, fragment flags indicate whether the packet needs to be fragmented or not. The value 0x20 represents MF (More Fragment); fix the macro name to match this. Signed-off-by: Ting Xu <ting.xu@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: refactor devlink getter/fallback functions to voidJacob Keller1-83/+50
After commit a8f89fa27773 ("ice: do not abort devlink info if board identifier can't be found"), the getter/fallback() functions no longer report an error. Convert the interface to a void so that it is no longer possible to add a version field that is fatal. This makes sense, because we should not fail to report other versions just because one of the version pieces could not be found. Finally, clean up the getter functions line wrapping so that none of them take more than 80 columns, as is the usual style for networking files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix link mode handlingAnirudh Venkataramanan1-2/+6
The messaging for unsupported module detection is different for lenient mode and strict mode. Update the code to print the right messaging for a given link mode. Media topology conflict is not an error in lenient mode, so return an error code only if not in lenient mode. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add feature bitmap, helpers and a check for DSCPAnirudh Venkataramanan5-2/+63
DSCP a.k.a L3 QoS is only supported on certain devices. To enforce this, this patch introduces a bitmap of features and helper functions. The feature bitmap is set based on device IDs on driver init. Currently, DSCP is the only feature in this bitmap, but there will be more in the future. In the DCB netlink flow, check if the feature bit is set before exercising DSCP. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add DSCP supportDave Ertman11-56/+464
Implement code to handle submission of APP TLV's containing DSCP to TC mapping. The first such mapping received on an interface will cause that PF to switch to L3 DSCP QoS mode, apply the default config for that mode, and apply the received mapping. Only one such mapping will be allowed per DSCP value, and when the last DSCP mapping is deleted, the PF will switch back into L2 VLAN QoS mode, applying the appropriate default QoS settings. L3 DSCP QoS mode will only be allowed in SW DCBx mode, in other words, when the FW LLDP engine is disabled. Commands that break this mutual exclusivity will be blocked. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Use the xsk batched rx allocation interfaceMagnus Karlsson1-25/+19
Use the new xsk batched rx allocation interface for the zero-copy data path. As the array of struct xdp_buff pointers kept by the driver is really a ring that wraps, the allocation routine is modified to detect a wrap and in that case call the allocation function twice. The allocation function cannot deal with wrapped rings, only arrays. As we now know exactly how many buffers we get and that there is no wrapping, the allocation function can be simplified even more as all if-statements in the allocation loop can be removed, improving performance. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210922075613.12186-5-magnus.karlsson@gmail.com
2021-09-28ice: Use xdp_buf instead of rx_buf for xsk zero-copyMagnus Karlsson2-39/+33
In order to use the new xsk batched buffer allocation interface, a pointer to an array of struct xsk_buff pointers need to be provided so that the function can put the result of the allocation there. In the ice driver, we already have a ring that stores pointers to xdp_buffs. This is only used for the xsk zero-copy driver and is a union with the structure that is used for the regular non zero-copy path. Unfortunately, that structure is larger than the xdp_buffs pointers which mean that there will be a stride (of 20 bytes) between each xdp_buff pointer. And feeding this into the xsk_buff_alloc_batch interface will not work since it assumes a regular array of xdp_buff pointers (each 8 bytes with 0 bytes in-between them on a 64-bit system). To fix this, remove the xdp_buff pointer from the rx_buf union and move it one step higher to the union above which only has pointers to arrays in it. This solves the problem and we can directly feed the SW ring of xdp_buff pointers straight into the allocation function in the next patch when that interface is used. This will improve performance. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210922075613.12186-4-magnus.karlsson@gmail.com
2021-09-27ice: Open devlink when device is readyLeon Romanovsky1-4/+2
Move devlink_registration routine to be the last command, when the device is fully initialized. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24ice: Delete always true check of PF pointerLeon Romanovsky1-3/+0
PF pointer is always valid when PCI core calls its .shutdown() and .remove() callbacks. There is no need to check it again. Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky3-16/+4
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10ice: Correctly deal with PFs that do not support RDMADave Ertman2-0/+8
There are two cases where the current PF does not support RDMA functionality. The first is if the NVM loaded on the device is set to not support RDMA (common_caps.rdma is false). The second is if the kernel bonding driver has included the current PF in an active link aggregate. When the driver has determined that this PF does not support RDMA, then auxiliary devices should not be created on the auxiliary bus. Without a device on the auxiliary bus, even if the irdma driver is present, there will be no RDMA activity attempted on this PF. Currently, in the reset flow, an attempt to create auxiliary devices is performed without regard to the ability of the PF. There needs to be a check in ice_aux_plug_dev (as the central point that creates auxiliary devices) to see if the PF is in a state to support the functionality. When disabling and re-enabling RDMA due to the inclusion/removal of the PF in a link aggregate, we also need to set/clear the bit which controls auxiliary device creation so that a reset recovery in a link aggregate situation doesn't try to create auxiliary devices when it shouldn't. Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Reported-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-16/+63
include/linux/netdevice.h net/socket.c d0efb16294d1 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls") 876f0bf9d0d5 ("net: socket: simplify dev_ifconf handling") 29c4964822aa ("net: socket: rework compat_ifreq_ioctl()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27ice: Only lock to update netdev dev_addrBrett Creeley1-4/+9
commit 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync list") introduced calls to netif_addr_lock_bh() and netif_addr_unlock_bh() in the driver's ndo_set_mac() callback. This is fine since the driver is updated the netdev's dev_addr, but since this is a spinlock, the driver cannot sleep when the lock is held. Unfortunately the functions to add/delete MAC filters depend on a mutex. This was causing a trace with the lock debug kernel config options enabled when changing the mac address via iproute. [ 203.273059] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 203.273065] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6698, name: ip [ 203.273068] Preemption disabled at: [ 203.273068] [<ffffffffc04aaeab>] ice_set_mac_address+0x8b/0x1c0 [ice] [ 203.273097] CPU: 31 PID: 6698 Comm: ip Tainted: G S W I 5.14.0-rc4 #2 [ 203.273100] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 203.273102] Call Trace: [ 203.273107] dump_stack_lvl+0x33/0x42 [ 203.273113] ? ice_set_mac_address+0x8b/0x1c0 [ice] [ 203.273124] ___might_sleep.cold.150+0xda/0xea [ 203.273131] mutex_lock+0x1c/0x40 [ 203.273136] ice_remove_mac+0xe3/0x180 [ice] [ 203.273155] ? ice_fltr_add_mac_list+0x20/0x20 [ice] [ 203.273175] ice_fltr_prepare_mac+0x43/0xa0 [ice] [ 203.273194] ice_set_mac_address+0xab/0x1c0 [ice] [ 203.273206] dev_set_mac_address+0xb8/0x120 [ 203.273210] dev_set_mac_address_user+0x2c/0x50 [ 203.273212] do_setlink+0x1dd/0x10e0 [ 203.273217] ? __nla_validate_parse+0x12d/0x1a0 [ 203.273221] __rtnl_newlink+0x530/0x910 [ 203.273224] ? __kmalloc_node_track_caller+0x17f/0x380 [ 203.273230] ? preempt_count_add+0x68/0xa0 [ 203.273236] ? _raw_spin_lock_irqsave+0x1f/0x30 [ 203.273241] ? kmem_cache_alloc_trace+0x4d/0x440 [ 203.273244] rtnl_newlink+0x43/0x60 [ 203.273245] rtnetlink_rcv_msg+0x13a/0x380 [ 203.273248] ? rtnl_calcit.isra.40+0x130/0x130 [ 203.273250] netlink_rcv_skb+0x4e/0x100 [ 203.273256] netlink_unicast+0x1a2/0x280 [ 203.273258] netlink_sendmsg+0x242/0x490 [ 203.273260] sock_sendmsg+0x58/0x60 [ 203.273263] ____sys_sendmsg+0x1ef/0x260 [ 203.273265] ? copy_msghdr_from_user+0x5c/0x90 [ 203.273268] ? ____sys_recvmsg+0xe6/0x170 [ 203.273270] ___sys_sendmsg+0x7c/0xc0 [ 203.273272] ? copy_msghdr_from_user+0x5c/0x90 [ 203.273274] ? ___sys_recvmsg+0x89/0xc0 [ 203.273276] ? __netlink_sendskb+0x50/0x50 [ 203.273278] ? mod_objcg_state+0xee/0x310 [ 203.273282] ? __dentry_kill+0x114/0x170 [ 203.273286] ? get_max_files+0x10/0x10 [ 203.273288] __sys_sendmsg+0x57/0xa0 [ 203.273290] do_syscall_64+0x37/0x80 [ 203.273295] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.273296] RIP: 0033:0x7f8edf96e278 [ 203.273298] Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 63 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 [ 203.273300] RSP: 002b:00007ffcb8bdac08 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 203.273303] RAX: ffffffffffffffda RBX: 000000006115e0ae RCX: 00007f8edf96e278 [ 203.273304] RDX: 0000000000000000 RSI: 00007ffcb8bdac70 RDI: 0000000000000003 [ 203.273305] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007ffcb8bda5b0 [ 203.273306] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 203.273306] R13: 0000555e10092020 R14: 0000000000000000 R15: 0000000000000005 Fix this by only locking when changing the netdev->dev_addr. Also, make sure to restore the old netdev->dev_addr on any failures. Fixes: 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync list") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27ice: restart periodic outputs around time changesJacob Keller1-0/+49
When we enabled auxiliary input/output support for the E810 device, we forgot to add logic to restart the output when we change time. This is important as the periodic output will be incorrect after a time change otherwise. This unfortunately includes the adjust time function, even though it uses an atomic hardware interface. The atomic adjustment can still cause the pin output to stall permanently, so we need to stop and restart it. Introduce wrapper functions to temporarily disable and then re-enable the clock outputs. Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha D Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27ice: add lock around Tx timestamp tracker flushJacob Keller1-0/+4
The driver didn't take the lock while flushing the Tx tracker, which could cause a race where one thread is trying to read timestamps out while another thread is trying to read the tracker to check the timestamps. Avoid this by ensuring that flushing is locked against read accesses. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27ice: remove dead code for allocating pin_configJacob Keller1-11/+0
We have code in the ice driver which allocates the pin_config structure if n_pins is > 0, but we never set n_pins to be greater than zero. There's no reason to keep this code until we actually have pin_config support. Remove this. We can re-add it properly when we implement support for pin_config for E810-T devices. Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27ice: fix Tx queue iteration for Tx timestamp enablementJacob Keller1-1/+1
The driver accidentally copied the ice_for_each_rxq iterator when implementing enablement of the ptp_tx bit for the Tx rings. We still load the Tx rings and set the ptp_tx field, but we iterate over the count of the num_rxq. If the number of Tx and Rx queues differ, this could either cause a buffer overrun when accessing the tx_rings list if num_txq is greater than num_rxq, or it could cause us to fail to enable Tx timestamps for some rings. This was not noticed originally as we generally have the same number of Tx and Rx queues. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-4/+8
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19ice: do not abort devlink info if board identifier can't be foundJacob Keller1-1/+3
The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13ice: Fix perout start time roundingMaciej Machnikowski1-1/+1
Internal tests found out that the latest code doesn't bring up 1PPS out as expected. As a result of incorrect define used to round the time up the time was round down to the past second boundary. Fix define used for rounding to properly round up to the next Top of second in ice_ptp_cfg_clkout to fix it. Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210813165018.2196013-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-8/+28
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09ice: don't remove netdev->dev_addr from uc sync listBrett Creeley1-8/+15
In some circumstances, such as with bridging, it's possible that the stack will add the device's own MAC address to its unicast address list. If, later, the stack deletes this address, the driver will receive a request to remove this address. The driver stores its current MAC address as part of the VSI MAC filter list instead of separately. So, this causes a problem when the device's MAC address is deleted unexpectedly, which results in traffic failure in some cases. The following configuration steps will reproduce the previously mentioned problem: > ip link set eth0 up > ip link add dev br0 type bridge > ip link set br0 up > ip addr flush dev eth0 > ip link set eth0 master br0 > echo 1 > /sys/class/net/br0/bridge/vlan_filtering > modprobe -r veth > modprobe -r bridge > ip addr add 192.168.1.100/24 dev eth0 The following ping command fails due to the netdev->dev_addr being deleted when removing the bridge module. > ping <link partner> Fix this by making sure to not delete the netdev->dev_addr during MAC address sync. After fixing this issue it was noticed that the netdev_warn() in .set_mac was overly verbose, so make it at netdev_dbg(). Also, there is a possibility of a race condition between .set_mac and .set_rx_mode. Fix this by calling netif_addr_lock_bh() and netif_addr_unlock_bh() on the device's netdev when the netdev->dev_addr is going to be updated in .set_mac. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Liang Li <liali@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-09ice: Stop processing VF messages during teardownAnirudh Venkataramanan2-0/+8
When VFs are setup and torn down in quick succession, it is possible that a VF is torn down by the PF while the VF's virtchnl requests are still in the PF's mailbox ring. Processing the VF's virtchnl request when the VF itself doesn't exist results in undefined behavior. Fix this by adding a check to stop processing virtchnl requests when VF teardown is in progress. Fixes: ddf30f7ff840 ("ice: Add handler to configure SR-IOV") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-09ice: Prevent probing virtual functionsAnirudh Venkataramanan1-0/+5
The userspace utility "driverctl" can be used to change/override the system's default driver choices. This is useful in some situations (buggy driver, old driver missing a device ID, trying a workaround, etc.) where the user needs to load a different driver. However, this is also prone to user error, where a driver is mapped to a device it's not designed to drive. For example, if the ice driver is mapped to driver iavf devices, the ice driver crashes. Add a check to return an error if the ice driver is being used to probe a virtual function. Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-2/+2
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-3/+3
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-8/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-25ice: Fix a memory leak in an error handling path in 'ice_pf_dcb_cfg()'Christophe JAILLET1-2/+4
If this 'kzalloc()' fails we must free some resources as in all the other error handling paths of this function. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-25ice: remove unnecessary VSI assignmentTony Nguyen1-1/+0
ice_get_vf_vsi() is being called twice for the same VSI. Remove the unnecessary call/assignment. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-06-25ice: remove the VSI info from previous aggVictor Raj1-2/+22
Remove the VSI info from previous aggregator after moving the VSI to a new aggregator. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-25ice: add support for auxiliary input/output pinsMaciej Machnikowski4-0/+366
The E810 device supports programmable pins for enabling both input and output events related to the PTP hardware clock. This includes both output signals with programmable period, as well as timestamping of events on input pins. Add support for enabling these using the CONFIG_PTP_1588_CLOCK interface. This allows programming the software defined pins to take advantage of the hardware clock features. Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-28 17:29:22 +0000