summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice/ice_virtchnl.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23ice: Fix configuring VIRTCHNL_OP_CONFIG_VSI_QUEUES with unbalanced queuesMarcin Szycik1-20/+17
Currently the VIRTCHNL_OP_CONFIG_VSI_QUEUES command may fail if there are less RX queues than TX queues requested. To fix it, only configure RXDID if RX queue exists. Fixes: e753df8fbca5 ("ice: Add support Flex RXD") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-14ice: virtchnl rss hena supportMd Fahad Iqbal Polash1-0/+112
Add support for 2 virtchnl msgs: VIRTCHNL_OP_SET_RSS_HENA VIRTCHNL_OP_GET_RSS_HENA_CAPS The first one allows VFs to clear all previously programmed RSS configuration and customize it. The second one returns the RSS HENA bits allowed by the hardware. Introduce ice_err_to_virt_err which converts kernel specific errors to virtchnl errors. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27ice: Add support Flex RXDMichal Jaron1-0/+86
Add new VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC flag, opcode VIRTCHNL_OP_GET_SUPPORTED_RXDIDS and add member rxdid in struct virtchnl_rxq_info to support AVF Flex RXD extension. Add support to allow VF to query flexible descriptor RXDIDs supported by DDP package and configure Rx queues with selected RXDID for IAVF. Add code to allow VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message to be processed. Add necessary macros for registers. Signed-off-by: Leyi Rong <leyi.rong@intel.com> Signed-off-by: Xu Ting <ting.xu@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221025161252.1952939-1-jacob.e.keller@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-17ice: Fix VF not able to send tagged traffic with no VLAN filtersSylwester Dziedziuch1-7/+50
VF was not able to send tagged traffic when it didn't have any VLAN interfaces and VLAN anti-spoofing was enabled. Fix this by allowing VFs with no VLAN filters to send tagged traffic. After VF adds a VLAN interface it will be able to send tagged traffic matching VLAN filters only. Testing hints: 1. Spawn VF 2. Send tagged packet from a VF 3. The packet should be sent out and not dropped 4. Add a VLAN interface on VF 5. Send tagged packet on that VLAN interface 6. Packet should be sent out and not dropped 7. Send tagged packet with id different than VLAN interface 8. Packet should be dropped Fixes: daf4dd16438b ("ice: Refactor spoofcheck configuration functions") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-29Merge branch '100GbE' of ↵Jakub Kicinski1-25/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-07-28 This series contains updates to ice driver only. Michal allows for VF true promiscuous mode to be set for multiple VFs and adds clearing of promiscuous filters when VF trust is removed. Maciej refactors ice_set_features() to track/check changed features instead of constantly checking against netdev features and adds support for NETIF_F_LOOPBACK. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: allow toggling loopback mode via ndo_set_features callback ice: compress branches in ice_set_features() ice: Fix promiscuous mode not turning off ice: Introduce enabling promiscuous mode on multiple VF's ==================== Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28ice: Fix promiscuous mode not turning offMichal Wilczynski1-8/+1
When trust is turned off for the VF, the expectation is that promiscuous and allmulticast filters are removed. Currently default VSI filter is not getting cleared in this flow. Example: ip link set enp236s0f0 vf 0 trust on ip link set enp236s0f0v0 promisc on ip link set enp236s0f0 vf 0 trust off /* promiscuous mode is still enabled on VF0 */ Remove switch filters for both cases. This commit fixes above behavior by removing default VSI filters and allmulticast filters when vf-true-promisc-support is OFF. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ice: Introduce enabling promiscuous mode on multiple VF'sMichal Wilczynski1-25/+33
In current implementation default VSI switch filter is only able to forward traffic to a single VSI. This limits promiscuous mode with private flag 'vf-true-promisc-support' to a single VF. Enabling it on the second VF won't work. Also allmulticast support doesn't seem to be properly implemented when vf-true-promisc-support is true. Use standard ice_add_rule_internal() function that already implements forwarding to multiple VSI's instead of constructing AQ call manually. Add switch filter for allmulticast mode when vf-true-promisc-support is enabled. The same filter is added regardless of the flag - it doesn't matter for this case. Remove unnecessary fields in switch structure. From now on book keeping will be done by ice_add_rule_internal(). Refactor unnecessarily passed function arguments. To test: 1) Create 2 VM's, and two VF's. Attach VF's to VM's. 2) Enable promiscuous mode on both of them and check if traffic is seen on both of them. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix max VLANs available for VFPrzemyslaw Patynowski1-1/+2
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-27/+26
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14ice: Fix queue config fail handlingPrzemyslaw Patynowski1-27/+26
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ice: remove VLAN representor specific opsMichal Swiatkowski1-40/+4
In switchdev mode VF VLAN caps will not be set there is no need to have specific VLAN ops for representor that only returns not supported error. As VLAN configuration commands will be blocked, the VF driver can't disable VLAN stripping at initialization. It leads to the situation when VLAN stripping on VF VSI is on, but in kernel it is off. To prevent this, disable VLAN stripping in VSI initialization. It doesn't break other usecases, because it is set according to kernel settings. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ice: don't set VF VLAN caps in switchdevMichal Swiatkowski1-27/+50
In switchdev mode any VLAN manipulation from VF side isn't allowed. In order to prevent parsing VLAN commands don't set VF VLAN caps. This will result in removing VLAN specific opcodes from allowlist. If VF send any VLAN specific opcode PF driver will answer with not supported error. With this approach VF driver know that VLAN caps aren't supported so it shouldn't send VLAN specific opcodes. Thanks to that, some ugly errors will not show up in dmesg (ex. on creating VFs in switchdev mode there are errors about not supported VLAN insertion and stripping) Move setting VLAN caps to separate function, including switchdev mode specific code. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+50
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06ice: clear stale Tx queue settings before configuringAnatolii Gerasymenko1-18/+50
The iAVF driver uses 3 virtchnl op codes to communicate with the PF regarding the VF Tx queues: * VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware logic for the Tx queues * VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts * VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings. There is a bug in the iAVF driver due to the race condition between VF reset request and shutdown being executed in parallel. This leads to a break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent. If this occurs, the PF driver never cleans up the Tx queues. This results in leaving behind stale Tx queue settings in the hardware and firmware. The most obvious outcome is that upon the next VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx scheduler node due to a lack of space. We need to protect ICE driver against such situation. To fix this, make sure we clear existing stale settings out when handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the previous settings. Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if the queue is not configured. The function already handles the case when the Tx queue is not currently configured and exits with a 0 return in that case. Fixes: 7ad15440acf8 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-05ice: always check VF VSI pointer valuesJacob Keller1-0/+5
The ice_get_vf_vsi function can return NULL in some cases, such as if handling messages during a reset where the VSI is being removed and recreated. Several places throughout the driver do not bother to check whether this VSI pointer is valid. Static analysis tools maybe report issues because they detect paths where a potentially NULL pointer could be dereferenced. Fix this by checking the return value of ice_get_vf_vsi everywhere. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-05ice: introduce common helper for retrieving VSI by vsi_numMaciej Fijalkowski1-20/+2
Both ice_idc.c and ice_virtchnl.c carry their own implementation of a helper function that is looking for a given VSI based on provided vsi_num. Their functionality is the same, so let's introduce the common function in ice.h that both of the mentioned sites will use. This is a strictly cleanup thing, no functionality is changed. Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-26ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()Ivan Vecera1-7/+5
Previous patch labelled "ice: Fix incorrect locking in ice_vc_process_vf_msg()" fixed an issue with ignored messages sent by VF driver but a small race window still left. Recently caught trace during 'ip link set ... vf 0 vlan ...' operation: [ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0 [ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF [ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task [ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3 [ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1 Setting of VLAN for VF causes a reset of the affected VF using ice_reset_vf() function that runs with cfg_lock taken: 1. ice_notify_vf_reset() informs IAVF driver that reset is needed and IAVF schedules its own reset procedure 2. Bit ICE_VF_STATE_DIS is set in vf->vf_state 3. Misc initialization steps 4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that clears ICE_VF_STATE_DIS in vf->vf_state Step 3 is mentioned race window because IAVF reset procedure runs in parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES message (opcode==3). This message is handled in ice_vc_process_vf_msg() and if it is received during the mentioned race window then it's marked as invalid and error is returned to VF driver. Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid this race condition. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Tested-by: Fei Liu <feliu@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-26ice: Fix incorrect locking in ice_vc_process_vf_msg()Ivan Vecera1-14/+7
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect because message sent from VF is ignored and never processed. Use mutex_lock() instead to fix the issue. It is safe because this mutex is used to prevent races between VF related NDOs and handlers processing request messages from VF and these handlers are running in ice_service_task() context. Additionally move this mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential races during allowlist access. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-05ice: Do not skip not enabled queues in ice_vc_dis_qs_msgAnatolii Gerasymenko1-2/+2
Disable check for queue being enabled in ice_vc_dis_qs_msg, because there could be a case when queues were created, but were not enabled. We still need to delete those queues. Normal workflow for VF looks like: Enable path: VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10) VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6) VIRTCHNL_OP_ENABLE_QUEUES (opcode 8) Disable path: VIRTCHNL_OP_DISABLE_QUEUES (opcode 9) VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11) The issue appears only in stress conditions when VF is enabled and disabled very fast. Eventually there will be a case, when queues are created by VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by VIRTCHNL_OP_ENABLE_QUEUES. In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES, because there is a check whether queues are enabled in ice_vc_dis_qs_msg. When we bring up the VF again, we will see the "Failed to set LAN Tx queue context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This happens because old 16 queues were not deleted and VF requests to create 16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to find a parent node for first newly requested queue (because all nodes are allocated to 16 old queues). Testing Hints: Just enable and disable VF fast enough, so it would be disabled before reaching VIRTCHNL_OP_ENABLE_QUEUES. while true; do ip link set dev ens785f0v0 up sleep 0.065 # adjust delay value for you machine ip link set dev ens785f0v0 down done Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-15ice: remove PF pointer from ice_check_vf_initJacob Keller1-6/+6
The ice_check_vf_init function takes both a PF and a VF pointer. Every caller looks up the PF pointer from the VF structure. Some callers only use of the PF pointer is call this function. Move the lookup inside ice_check_vf_init and drop the unnecessary argument. Cleanup the callers to drop the now unnecessary local variables. In particular, replace the local PF pointer with a HW structure pointer in ice_vc_get_vf_res_msg which simplifies a few accesses to the HW structure in that function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-15ice: introduce ice_virtchnl.c and ice_virtchnl.hJacob Keller1-0/+3785
Just as we moved the generic virtualization library logic into ice_vf_lib.c, move the virtchnl message handling into ice_virtchnl.c Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 11:13:19 +0000