summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_common.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-04i40e: Add support for X710 B/P & SFP+ cardsAleksandr Loktionov1-0/+5
New device ids are created to support X710 backplane and SFP+ cards. This patch adds in i40e driver support for 2.5GbaseT and 5GbaseT speed. It's implemented by checking I40E_CAP_PHY_TYPE_2_5GBASE_T, I40E_CAP_PHY_TYPE_5GBASE_T bits from f/w and setting corresponding bits in ethtool link ksettings supported and advertising masks. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04i40e: add new pci id for X710/XXV710 N3000 cardsAleksandr Loktionov1-0/+2
New device ids are created to support X710/XXV710 N3000 cards. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov1-2/+60
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-16i40e: Fix for 10G ports LED not blinkingPiotr Marczak1-33/+0
On some hardware LEDs would not blink after command 'ethtool -p {eth-port}' in certain circumstances. Now, function does not care about the activity of the LED (though still preserves its state) but forcibly executes identification blinking and then restores the LED state. Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-16i40e: Implement DDP support in i40e driverAleksandr Loktionov1-22/+231
This patch introduces DDP (Dynamic Device Personalization) which allows loading profiles that change the way internal parser interprets processed frames. To load DDP profiles it utilizes ethtool flash feature. The files with recipes must be located in /var/lib/firmware directory. Afterwards the recipe can be loaded by invoking: ethtool -f <if_name> <file_name> 100 ethtool -f <if_name> - 100 See further details of this feature in the i40e documentation, or visit https://www.intel.com/content/www/us/en/architecture-and-technology/ethernet/dynamic-device-personalization-brief.html The driver shall verify DDP profile can be loaded in accordance with the rules: * Package with Group ID 0 are exclusive and can only be loaded the first. * Packages with Group ID 0x01-0xFE can only be loaded simultaneously with the packages from the same group. * Packages with Group ID 0xFF are compatible with all other packages. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Allow disabling FW LLDP on X722 devicesPatryk Małek1-0/+3
This patch allows disabling FW LLDP agent on X722 devices. It also changes a source of information for this feature from pf->hw_features to pf->hw.flags which are set in i40e_init_adminq. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: Add AQ command for rearrange NVM structurePiotr Azarewicz1-0/+35
During switching between old NVM structure approach (called structured NVM) to new one (called flat NVM) or backward flash needs to be rearranged to required NVM structure. This is a part of transition from one NVM structure to another. The function is introduced to command firmware to start rearrangement process. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-30i40e/i40evf: cleanup incorrect function doxygen commentsJacob Keller1-15/+22
Recent versions of the Linux kernel now warn about incorrect parameter definitions for function comments. Fix up several function comments to correctly reflect the current function arguments. This cleans up the warnings and helps ensure our documentation is accurate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-19i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATEPaweł Jabłoński1-6/+29
This fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE in the PF Reset path when Global Reset is in progress. While the driver is polling for the end of the PF Reset and the Global Reset is triggered, abandon the PF Reset path and prepare for the upcoming Global Reset. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Fix incorrect return typesDoug Dziggel1-2/+2
Fix return types from i40e_status to enum i40e_status_code. Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: add doxygen comment for new mode parameterJacob Keller1-0/+1
A recent patch updated the signature for i40e_aq_set_switch_config() to add a new parameter 'mode'. It forgot to document the parameter in the doxygen function header comment. Add the parameter to the function description now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: fix for wrong partition id calculation on OCP mezz cardsMariusz Stachura1-1/+22
This patch overwrites number of ports for X722 devices with support for OCP PHY mezzanine. The old method with checking if port is disabled in the PRTGEN_CNF register cannot be used in this case. When the OCP is removed, ports were seen as disabled, which resulted in wrong calculation of partition id, that caused WoL to be disabled on certain ports. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26i40e: Display LLDP information on vSphere Web ClientUpasana Menon1-0/+27
This patch enables driver to display LLDP information on the vSphere Web Client with Intel adapters (X710, XL710) and Distributed Virtual Switch. Signed-off-by: Upasana Menon <upasana.menon@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26i40e: Add returning AQ critical error to SWMichal Kosiarz1-0/+2
The FW has the ability to return a critical error on every AQ command. When this critical error occurs then we need to send the correct response to the caller. Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: Fix for blinking activity instead of link LEDsMichal Kuchta1-3/+2
This fix solves an issue occurring while calling i40e_led_set function from the driver with "blink" parameter set as TRUE. This call resulted in Activity LED blinking instead of Link LED, which may lead to errors in physically identifying the port, since Activity LED may be blinking for different reasons as well. Signed-off-by: Michal Kuchta <michal.kuchta@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags ↵Pawel Jablonski1-1/+12
for NVM update This patch adds new I40E_NVMUPD_GET_AQ_EVENT state to allow retrieval of AdminQ events as a result of AdminQ commands sent to firmware. Add preservation flags support on X722 devices for NVM update AdminQ function wrapper. Add new parameter and handling to nvmupdate admin queue function intended to allow nvmupdate tool to configure the preservation flags in the AdminQ command. This is required to implement FlatNVM on X722 devices. Signed-off-by: Pawel Jablonski <pawel.jablonski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-10i40e: track id can be 0Jingjing Wu1-5/+0
track_id == 0 is valid for “read only” profiles when profile does not have any “write” commands. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-10i40e: change ppp name to ddpJingjing Wu1-11/+11
PPP name was going to be confusing since PPP already means point to point protocol. It is decided to change pipeline personalization profile(ppp) to dynamic device personalization(ddp). Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-21i40e: Fix FLR reset timeout issueFilip Sadowski1-0/+7
This patch allows detection of upcoming core reset in case NIC gets stuck while performing FLR reset. The i40e_pf_reset() function returns I40E_ERR_NOT_READY when global reset was detected. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-21i40e: Fix for NUP NVM image downgrade failureJacob Keller1-1/+2
Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices") we've used the NVM lock to synchronize NVM reads even on devices which don't strictly need the lock. Doing so can cause a regression on older firmware prior to 1.5, especially when downgrading the firmware. Fix this by only grabbing the lock if we're running on an X722 device (which requires the lock as it uses the AdminQ to read the NVM), or if we're currently running 1.5 or newer firmware. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-31i40e: Enable cloud filters via tc-flowerAmritha Nambiar1-0/+189
This patch enables tc-flower based hardware offloads. tc flower filter provided by the kernel is configured as driver specific cloud filter. The patch implements functions and admin queue commands needed to support cloud filters in the driver and adds cloud filters to configure these tc-flower filters. The classification function of the filter is to direct matched packets to a traffic class. The hardware traffic class is set based on the the classid reserved in the range :ffe0 - :ffef. Match Dst MAC and route to TC0: prio 1 flower dst_mac 3c:fd:fe:a0:d6:70 skip_sw\ hw_tc 1 Match Dst IPv4,Dst Port and route to TC1: prio 2 flower dst_ip 192.168.3.5/32\ ip_proto udp dst_port 25 skip_sw\ hw_tc 2 Match Dst IPv6,Dst Port and route to TC1: prio 3 flower dst_ip fe8::200:1\ ip_proto udp dst_port 66 skip_sw\ hw_tc 2 Delete tc flower filter: Example: Flow Director Sideband is disabled while configuring cloud filters via tc-flower and until any cloud filter exists. Unsupported matches when cloud filters are added using enhanced big buffer cloud filter mode of underlying switch include: 1. source port and source IP 2. Combined MAC address and IP fields. 3. Not specifying L4 port These filter matches can however be used to redirect traffic to the main VSI (tc 0) which does not require the enhanced big buffer cloud filter support. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-31i40e: Cloud filter mode for set_switch_config commandAmritha Nambiar1-1/+3
Add definitions for L4 filters and switch modes based on cloud filters modes and extend the set switch config command to include the additional cloud filter mode. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-17i40e: Add new PHY types for 25G AOC and ACC supportSudheer Mogilappagari1-0/+2
This patch adds support for 25G Active Optical Cables (AOC) and Active Copper Cables (ACC) PHY types. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Krzysztof Malek <krzysztof.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-13i40e: fix link reportingAlan Brady1-1/+6
When querying the NVM for supported phy_types, on some firmware versions, we were failing to actually fill out the phy_types which means ethtool wouldn't report any link types. Testing-hints: Check 'ethtool <iface>' if you have the right (wrong?) firmware. Without this patch, no link modes will be reported. Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangsJayaprakash Shanmugam1-13/+29
- When the I2C is busy, the PHY reads are delayed. The firmware will return EGAIN in these cases with an expectation that the SW will trigger the reads again - This patch retries the operation for a maximum period of 500ms Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Stop dropping 802.1ad tags - eth proto 0x88a8Scott Peterson1-1/+5
Enable i40e to pass traffic with VLAN tags using the 802.1ad ethernet protocol ID (0x88a8). This requires NIC firmware providing version 1.7 of the API. With older NIC firmware 802.1ad tagged packets will continue to be dropped. No VLAN offloads nor RSS are supported for 802.1ad VLANs. Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: use admin queue for setting LEDs behaviorMariusz Stachura1-24/+91
Instead of accessing register directly, use newly added AQC in order to blink LEDs. Introduce and utilize a new flag to prevent excessive API version checking. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Add support for 'ethtool -m'Filip Sadowski1-0/+69
This patch adds support for 'ethtool -m' command which displays information about (Q)SFP+ module plugged into NIC's cage. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Fix reporting of supported link modesFilip Sadowski1-1/+10
This patch fixes incorrect reporting of supported link modes on some NICs. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-29i40e: refactor FW version checkingMitch Williams1-2/+4
The i40e driver now supports two different devices with two different firmware versions. So be smart about how we handle these. Move the FW version macros to the appropriate header file, and add a convenience macro that checks the version based on the device. Then use this macro to check whether or not the driver can use the new link info API. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: prevent snprintf format specifier truncationJacob Keller1-2/+2
Increase the size of the prefix buffer so that it can hold enough characters for every possible input. Although 20 is enough for all expected inputs, it is possible for the values to be larger than expected, resulting in a possibly truncated string. Additionally, lets use sizeof(prefix) in order to ensure we use the correct size if we need to change the array length in the future. New versions of GCC starting at 7 now include warnings to prevent truncation unless you handle the return code. At most 27 bytes can be written here, so lets just increase the buffer size even if for all expected hw->bus.* values we only needed 20. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: Store the requested FEC informationMariusz Stachura1-0/+4
Store information about FEC modes, that were requested. It will be used in printing link status information function and this way there is no need to call admin queue there. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: comment that udp_port must be in host byte orderJacob Keller1-1/+5
The firmware expects the port number passed when setting up the UDP tunnel configuration to be in Little Endian format. The i40e_aq_add_udp_tunnel command byte swaps the value from host order to Little Endian. Since commit fe0b0cd97b4f ("i40e: send correct port number to AdminQ when enabling UDP tunnels") we've correctly sent the value in host order. Let's also add a comment to the function explaining that it must be in host order, as the port numbers are commonly stored as Big Endian values. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40e: use new unified virtchnl header fileJesse Brandeburg1-1/+1
This patch changes the i40e driver to start using the new virtchnl interface header file, and removes an already existing duplicate of the i40e_virtchnl.h file contained in the i40e directory. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-19i40e: new AQ commandsJingjing Wu1-0/+212
Add admin queue functions for Pipeline Personalization Profile AQ commands: - Write Recipe Command buffer (Opcode: 0x0270) - Get Applied Profiles list (Opcode: 0x0271) Change-ID: I558b4145364140f624013af48d4bbf79d21ebb0d Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-29i40e: use register for XL722 control register read/writePaul M Stillwell Jr1-2/+6
The XL722 doesn't support the AQ command to read/write the control register so enable it to bypass the check and use the direct read/write method. Change-ID: Iefecc737b57207485c90845af5989d5af518bf16 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-27i40e: Drop FCoE code from core driver filesAlexander Duyck1-27/+0
Looking over the code for FCoE it looks like the Rx path has been broken at least since the last major Rx refactor almost a year ago. It seems like FCoE isn't supported for any of the Fortville/Fortpark hardware so there isn't much point in carrying the code around, especially if it is broken and untested. Change-ID: I892de8fa551cb129ce2361e738ff82ce55fa229e Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-18i40e: refactor AQ CMD buffer debug printingAlan Brady1-7/+12
This patch refactors the '%*ph' printk format specifier to instead use the print_hex_dump function, as recommended by the '%*ph' documentation. This produces better/more standardized output. Change-ID: Id56700b4e8abc40ff8c04bc8379e7df04cb4d6fd Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-11i40e: Save link FEC info from link up eventHenry Tieman1-0/+2
Store the FEC status bits from the link up event into the hw_link_info structure. Change-ID: I9a7b256f6dfb0dce89c2f503075d0d383526832e Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Add functions which apply correct PHY access method for read and write ↵Michal Kosiarz1-0/+72
operation Depending on external PHY type, register access method should be different. Clause22 or Clause45 can be chosen for different PHYs. Implemented functions apply correct access method for used device. Change-ID: If39d5f0da9c0b905a8cbdc1ab89885535e7d0426 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Add FEC for 25gCarolyn Wyborny1-0/+2
This patch adds adminq support for Forward Error Correction ("FEC")for 25g products. Change-ID: Iaff4910737c239d2c730e5c22a313ce9c37d3964 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Add support for 25G devicesCarolyn Wyborny1-1/+10
Add support for 25G devices - defines and data structures. One tricky part here is that the firmware support for these Devices introduces a mismatch between the PHY type enum and the bitfields for the phy types. This change creates a macro and uses it to increment the 25G PHY values when creating 25G bitfields. Change-ID: I69b24d837d44cf9220bf5cb8dd46c5be89ce490b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: set broadcast promiscuous mode for each active VLANJacob Keller1-0/+34
A previous workaround added to ensure receipt of all broadcast frames incorrectly set the broadcast promiscuous mode unconditionally regardless of active VLAN status. Replace this partial workaround with a complete solution that sets the broadcast promiscuous filters in i40e_sync_vsi_filters. This new method sets the promiscuous mode based on when broadcast filters are added or removed. I40E_VLAN_ANY will request a broadcast filter for all VLANs, (as we're in untagged mode) while a broadcast filter on a specific VLAN will only request broadcast for that VLAN. Thus, we restore addition of broadcast filter to the array, but we add special handling for these such that they enable the broadcast promiscuous mode instead of being sent as regular filters. The end result is that we will correctly receive all broadcast packets (even those with a *source* address equal to the broadcast address) but will not receive packets for which we don't have an active VLAN filter. Change-ID: I7d0585c5cec1a5bf55bf533b42e5e817d5db6a2d Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Pass unknown PHY type for unknown PHYsHenry Tieman1-1/+2
The PHY type value for unrecognized PHYs and cables was changed based on firmware version number. Newer hardware use lower firmware version numbers and this was causing some PHYs to be identified as type 0x16 instead of 0xe (unknown). Without this patch, newer card will incorrectly identify unknown PHYs and cables. This change adds hardware type to the check for firmware version so the PHY type is reported correctly. Change-ID: I0723cbfd263c76fc73ff1a5275d1639051376c9a Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Remove unreachable codeHenry Tieman1-8/+1
The code at the end of i40e_read_phy_register_clause22() contained unreachable code and redundant control statements. This change removes the unreachable code. And deletes the redundant goto statement and if statement. Change-ID: I713032b1585396f40f903cbcfdea987abd874400 Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add protocols over MCTP to i40e_aq_discover_capabilitiesPiotr Raczynski1-0/+8
Add logical_id to I40E_AQ_CAP_ID_MNG_MODE capability starting from major version 2. Change-ID: Idb29214b172ea5c70cbd45a99e6745c0215af7e4 Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add Clause22 implementationMichal Kosiarz1-43/+137
Some external PHYs require Clause22 method for accessing registers. This patch also adds some defines to support blink led on devices using 10CBaseT PHY. Change-ID: I868a4326911900f6c89e7e522fda4968b0825f14 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Fix for division by zeroMichal Kosiarz1-2/+4
For some cases when reading from device are incorrect or image is incorrect, this part of code causes crash due to division by zero. Change-ID: I8961029a7a87b0a479995823ef8fcbf6471405e1 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-01 10:58:00 +0000