summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)AuthorFilesLines
2020-07-06net: hns3: fix use-after-free when doing self testYonglong Liu1-3/+6
Enable promisc mode of PF, set VF link state to enable, and run iperf of the VF, then do self test of the PF. The self test will fail with a low frequency, and may cause a use-after-free problem. [ 87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 87.159722] ================================================================== [ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608 [ 87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186 [ 87.201012] [ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4 [ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020 [ 87.238292] Call trace: [ 87.243173] dump_backtrace+0x0/0x280 [ 87.250491] show_stack+0x24/0x30 [ 87.257114] dump_stack+0xe8/0x140 [ 87.263911] print_address_description.isra.8+0x70/0x380 [ 87.274538] __kasan_report+0x12c/0x230 [ 87.282203] kasan_report+0xc/0x18 [ 87.288999] __asan_load1+0x60/0x68 [ 87.295969] hex_dump_to_buffer+0x140/0x608 [ 87.304332] print_hex_dump+0x140/0x1e0 [ 87.312000] hns3_lb_check_skb_data+0x168/0x170 [ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0 [ 87.329422] hns3_self_test+0x708/0x8c0 The length of packet sent by the selftest process is only 128 + 14 bytes, and the min buffer size of a BD is 256 bytes, and the receive process will make sure the packet sent by the selftest process is in the linear part, so only check the linear part in hns3_lb_check_skb_data(). So fix this use-after-free by using skb_headlen() to dump skb->data instead of skb->len. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: add a missing uninit debugfs when unload driverHuazhong Tan1-2/+1
When unloading driver, if flag HNS3_NIC_STATE_INITED has been already cleared, the debugfs will not be uninitialized, so fix it. Fixes: b2292360bb2a ("net: hns3: Add debugfs framework registration") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: fix for mishandle of asserting VF reset failHuazhong Tan1-0/+5
When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE and handshake status should not set, otherwise the retry will fail. So adds a check for asserting VF reset and returns directly when fails. Fixes: ef5f8e507ec9 ("net: hns3: stop handling command queue while resetting VF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: check reset pending after FLR prepareHuazhong Tan1-1/+1
If there is a PF reset pending before FLR prepare, FLR's preparatory work will not fail, but the FLR rebuild procedure will fail for this pending. So this PF reset pending should be handled in the FLR preparatory. Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25hns: do not cast return value of napi_gro_receive to nullJason A. Donenfeld1-1/+1
Basically no drivers care about the return value here, and there's no __must_check that would make casting to void sensible, so remove it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-11/+11
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-30net: hns3: remove some unused codes in hns3_nic_set_features()Huazhong Tan1-6/+0
NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature for the HNS3 driver, so the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_nic_set_features() won't be called, remove it. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix two coding style issues in hclgevf_main.cHuazhong Tan1-2/+1
Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(), and fix a reverse xmas tree coding style issue in hclgevf_set_rss_tc_mode(). Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix an incorrect comment for num_tqps in struct hclgevf_devHuazhong Tan1-1/+1
struct hclgevf_dev stands for VF device, its field num_tqps indicates the number of VF's task queue pairs, so the comment is incorrect, replace 'PF' with 'VF'. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove two unused macros in hclgevf_cmd.cHuazhong Tan1-3/+0
Macro hclgevf_ring_to_dma_dir and hclgevf_is_csq defined in hclgevf_cmd.c, but not used, so remove them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove an unused macro hclge_is_csqHuazhong Tan1-2/+0
Macro hclge_is_csq defined in hcgle_cmd.c has not been used, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix a print format issue in hclge_mac_mdio_config()Huazhong Tan1-1/+1
Use %d to print int variable 'ret' in hclge_mac_mdio_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: print out speed info when parsing speed failsHuazhong Tan1-1/+2
When calling hclge_parse_speed() fails, printing out the speed is helpful for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hclge_devHuazhong Tan1-6/+0
Remove some fields in struct hclge_dev which have not been used. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove two duplicated register macros in hclgevf_main.hHuazhong Tan2-6/+4
HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG, replace the former with the latter, and rename macro HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of 'state'. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove unused struct hnae3_unic_private_infoHuazhong Tan1-11/+0
Since field .uinfo in struct hnae3_handle never be used, so remove it and its structure definition. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3; remove unused HNAE3_RESTORE_CLIENT in enum hnae3_reset_notify_typeHuazhong Tan1-1/+0
Remove HNAE3_RESTORE_CLIENT which is not needed now. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hns3_nic_privHuazhong Tan1-22/+0
Remove some fileds which defined in struct hns3_nic_priv, but not used, and remove the related definition of struct hns3_udp_tunnel and enum hns3_udp_tnl_type. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclge_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclge_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_query_bd_num_cmd_send()Huazhong Tan1-9/+12
In order to improve code maintainability and readability, rewrite the process of BDs' initialization in hclge_query_bd_num_cmd_send(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_config_tso()Huazhong Tan1-13/+4
Since parameters 'tso_mss_min' and 'tso_mss_max' only indicate the minimum and maximum MSS, the hnae3_set_field() calls are meaningless, remove them and change the type of these two parameters to u16. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a missing mutex destroy in hclge_init_ad_dev()Huazhong Tan1-0/+1
Add a mutex destroy call in hclge_init_ae_dev() when fails. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove an unnecessary 'goto' in hclge_init_ae_dev()Huazhong Tan1-4/+2
Remove the redundant 'goto' and return -ENOMEM directly, when allocating memory for 'hdev' fails in hclge_init_ae_dev(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: add a print for initializing CMDQ when reset pendingHuazhong Tan1-0/+3
When initializing CMDQ fails because of reset pending, there is no hint for debugging, so adds a log for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: remove unnecessary MAC enable in app loopbackYufeng Mo1-2/+0
Packets will not pass through MAC during app loopback. Therefore, it is meaningless to enable MAC while doing app loopback. This patch removes this unnecessary action. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: change the order of reinitializing RoCE and NIC client during resetYufeng Mo1-5/+4
The HNS RDMA driver will support VF device later, whose re-initialization should be done after PF's. This patch changes the order of hclge_reset_prepare_up() and hclge_notify_roce_client(), so that PF's RoCE client will be reinitialized before VF's. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: add a resetting check in hclgevf_init_nic_client_instance()Guangbin Huang1-0/+9
To prevent from initializing VF NIC client in reset handling state, this patch adds resetting check in hclgevf_init_nic_client_instance(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove unnecessary frag list checking in hns3_nic_net_xmit()Huazhong Tan1-4/+1
The skb_has_frag_list() in hns3_nic_net_xmit() is redundant, since skb_walk_frags() includes this checking implicitly. Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove some unused macrosHuazhong Tan1-17/+0
There are some macros defined in hns3_enet.h, but not used in anywhere. Reported-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify an incorrect error log in hclge_mbx_handler()Huazhong Tan1-1/+1
When handling HCLGE_MBX_GET_LINK_STATUS, PF will return the link status to the VF, so the error log of hclge_get_link_info() is incorrect. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove a duplicated printing in hclge_configure()Huazhong Tan1-3/+1
Since hclge_get_cfg() already has error print, so hclge_configure() should not print error when calling hclge_get_cfg() fail. Reported-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify some incorrect spellingHuazhong Tan2-8/+8
This patch modifies some incorrect spelling. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-10net: hns3: disable auto-negotiation off with 1000M setting in ethtoolYufeng Mo1-1/+6
The 802.3 specification does not specify the behavior of auto-negotiation off with 1000M in PHY. Therefore, some PHY compatibility issues occur. This patch forbids the setting of this unreasonable mode by ethtool in driver. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: hns3: optimized the judgment of the input parameters of dump ncl configYufeng Mo1-5/+10
This patch optimizes the judgment of the input parameters of dump ncl config by checking the number and value of the input parameters apart. It's clearer and more reasonable. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: hns3: provide .get_cmdq_stat interface for the clientHuazhong Tan2-0/+10
This patch provides a new interface for the client to query whether CMDQ is ready to work. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: hns3: modify two uncorrect macro namesHuazhong Tan2-4/+4
According to the UM, command 0x0B03 and 0x0B13 are used to query the statistics about TX and RX, not the status, so modifies the unsuitable macro name of these two command. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: hns3: remove a redundant register macro definitionHuazhong Tan2-8/+5
HCLGE_MISC_VECTOR_INT_STS and HCLGE_VECTOR_PF_OTHER_INT_STS_REG both represent the misc interrupt status register(0x20800), so removes HCLGE_VECTOR_PF_OTHER_INT_STS_REG and replaces it with HCLGE_MISC_VECTOR_INT_STS. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-07net: hisilicon: Make CONFIG_HNS invisibleGeert Uytterhoeven1-1/+1
The HNS config symbol enables the framework support for the Hisilicon Network Subsystem. It is already selected by all of its users, so there is no reason to make it visible. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: hns3: adds support for reading module eeprom infoYonglong Liu4-0/+196
This patch adds support for reading the optical module eeprom info via "ethtool -m". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: remove an unnecessary check in hclge_set_umv_space()Huazhong Tan1-2/+1
Since hclge_set_umv_space() is only called by hclge_init_umv_space(), parameter 'allocated_size' will not be NULL. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: optimize the filter table entries handling when resettingJian Shen8-105/+94
Currently, the PF driver removes all (including its VFs') MAC/VLAN flow director table entries when resetting, and restores them after reset completed. In fact, the hardware will clear all table entries only in IMP reset and global reset. So driver only needs to restore the table entries in these cases, and needs do nothing when PF reset, FLR or other function level reset. This patch optimizes it by removing unnecessary table entries clear and restoring handling in the reset flow, and doing the restoring after reset completed. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: use mutex vport_lock instead of mutex umv_lockJian Shen2-13/+19
Currently, the driver use mutex umv_lock to protect the variable vport->share_umv_size. And there is already a mutex vport_lock being defined in the driver, which is designed to protect the resource of vport. So we can use vport_lock instead of umv_lock. Furthermore, there is a time window for protect share_umv_size between checking UMV space and doing MAC configuration in the lin function hclge_add_uc_addr_common(). It should be extended. This patch uses mutex vport_lock intead of spin lock umv_lock to protect share_umv_size, and adjusts the mutex's range. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: refactor the promisc mode settingJian Shen8-46/+122
As the HNS3 driver doesn't update the MAC address directly in function hns3_set_rx_mode() now, it can't know whether the MAC table is full from __dev_uc_sync() and __dev_mc_sync(), so it's senseless to handle the overflow promisc here. This patch removes the handle of overflow promisc from function hns3_set_rx_mode(), and updates the promisc mode in the service task. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: add support for dumping UC and MC MAC listJian Shen2-0/+53
This patch adds support for dumping entries of UC and MC MAC list, which help checking whether a MAC address being added into hardware or not. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: refactor the MAC address configureJian Shen6-218/+860
Currently, the HNS3 driver sync and unsync MAC address in function hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly in the path of dev_set_rx_mode(). If failed, it won't retry until next calling of hns3_set_rx_mode(). On the other hand, if request add and remove a same address many times at a short interval, each request must be done one by one, can't be merged. For VF, it sends mailbox messages to PF to request adding or deleting MAC address in the path of function hns3_set_rx_mode(), no matter the address is configured success. This patch refines it by recording the MAC address in function hns3_set_rx_mode(), and updating MAC address in the service task. If failed, it will retry by the next calling of periodical service task. It also uses some state to mark the state of each MAC address in the MAC list, which can help merge configure request for a same address. With these changes, when global reset or IMP reset occurs, we can restore the MAC table with the MAC list. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: replace num_req_vfs with num_alloc_vport in hclge_reset_umv_space()Jian Shen1-1/+1
Like the calculation elsewhere, replaces num_req_vfs with num_alloc_vport in hclge_reset_umv_space(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: remove unnecessary parameter 'is_alloc' in hclge_set_umv_space()Jian Shen1-9/+5
Since hclge_set_umv_space() is only called by hclge_init_umv_space(), so parameter 'is_alloc' is redundant. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: hns3: refine for unicast MAC VLAN space managementJian Shen1-48/+24
Currently, firmware helps manage the unicast MAC VLAN table space for each PF. PF just needs to tell firmware its wanted space when initializing, and unnecessary to free it when un-intializing. So this patch removes the umv space free handle, and removes the forward statement of hclge_set_umv_space() by defining hclge_init_umv_space() after it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-05 12:08:54 +0000