summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-26net: hns3: use atomic_t replace u32 for arq's countHuazhong Tan1-1/+1
Since irq handler and mailbox task will both update arq's count, so arq's count should use atomic_t instead of u32, otherwise its value may go wrong finally. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14net: hns3: code optimization for command queue' spin lockPeng Li1-2/+2
This patch removes some redundant BH disable when initializing and uninitializing command queue. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: hns3: add error handler for initializing command queueHuazhong Tan1-3/+8
This patch adds error handler for the failure of command queue initialization both PF and VF. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns3: simplify hclgevf_cmd_csq_cleanHuazhong Tan1-11/+24
csq is used as a ring buffer, the value of the desc will be replaced in next use. This patch removes the unnecessary memset, and just updates the next_to_clean. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: clear command queue's registers when unloading VF driverHuazhong Tan1-0/+20
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-3/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-09net: hns3: stop handling command queue while resetting VFHuazhong Tan1-1/+12
According to hardware's description, after the reset occurs, the driver needs to re-initialize the command queue before sending and receiving any commands. Therefore, the VF's driver needs to identify the command queue needs to re-initialize with HCLGEVF_STATE_CMD_DISABLE, and does not allow sending or receiving commands before the re-initialization. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: hns3: fix for cmd queue memory not freed problem during resetHuazhong Tan1-61/+80
It is not necessary to reallocate the descriptor and remap the descriptor memory in reset process, otherwise it may cause memory not freed problem. Also, this patch initializes the cmd queue's spinlocks in hclgevf_alloc_cmd_queue, and take the spinlocks when reinitializing cmd queue' registers. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: hns3: Add handle for default caseJian Shen1-4/+4
There are a few "switch-case" codes missed handle for default case. For some abnormal case, it should return error code instead of return 0. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Fix cmdq registers initialization issue for vfJian Shen1-2/+2
According to hardware's description, the head pointer register should be written before the tail pointer register while initializing the vf command queue. Otherwise, it may trigger an interrupt even though there is no command received. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: hns3: use dma_zalloc_coherent instead of kzalloc/dma_map_singleHuazhong Tan1-17/+9
Reference to Documentation/DMA-API-HOWTO.txt, Streaming DMA mappings which are usually mapped for one DMA transfer, Network card DMA ring descriptors should use Consistent DMA mappings. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: hns3: Changes to support ARQ(Asynchronous Receive Queue)Salil Mehta1-0/+6
Current mailbox CRQ could consists of both synchronous and async responses from the PF. Synchronous responses are time critical and should be handed over to the waiting tasks/context as quickly as possible otherwise timeout occurs. Above problem gets accentuated if CRQ consists of even single async message. Hence, it is important to have quick handling of synchronous messages and maybe deferred handling of async messages This patch introduces separate ARQ(async receive queues) for the async messages. These messages are processed later with repsect to mailbox task while synchronous messages still gets processed in context to mailbox interrupt. ARQ is important as VF reset introduces some new async messages like MBX_ASSERTING_RESET which adds up to the presssure on the responses for synchronousmessages and they timeout even more quickly. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interfaceSalil Mehta1-0/+342
This patch adds support of command interface for communication with the IMP(Integrated Management Processor) for HNS3 Virtual Function Driver. Each VF has support of CQP(Command Queue Pair) ring interface. Each CQP consis of send queue CSQ and receive queue CRQ. There are various commands a VF may support, like to query frimware version, TQP management, statistics, interrupt related, mailbox etc. This also contains code to initialize the command queue, manage the command queue descriptors and Rx/Tx protocol with the command processor in the form of various commands/results and acknowledgements. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>