summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ethoc.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-06net: ethoc: enable NAPI before poll may be scheduledMax Filippov1-1/+2
ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: ethoc: Use ether_addr_copy()Tobias Klauser1-2/+2
Use ether_addr_copy() instead of memcpy() to set netdev->dev_addr (which is 2-byte aligned). Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: ethoc: Use eth_hw_addr_random()Tobias Klauser1-8/+2
Use eth_hw_addr_random() to set a random dev_addr and update addr_assign_type instead of open-coding it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17net: ethoc: Make needlessly global struct ethtool_ops staticTobias Klauser1-1/+1
Make the needlessly global struct ethtool_ops ethoc_ethtool_ops static to fix a sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05net: ethoc: Remove unused members from struct ethocTobias Klauser1-7/+0
The io_region_size and dma_alloc members of struct ethoc are only written but never read, so they might as well be removed. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ethoc: Demote packet dropped error message to debugFlorian Fainelli1-1/+1
Spamming the console with: net eth1: packet dropped can happen fairly frequently if the adapter is busy transmitting, demote the message to a debug print. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ethoc: Utilize of_get_mac_address()Florian Fainelli1-4/+3
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ethoc: Account for duplex changesFlorian Fainelli1-0/+35
ethoc_mdio_poll() which is our PHYLIB adjust_link callback does nothing, we should at least react to duplex changes and change MODER accordingly. Speed changes is not a problem, since the OpenCores Ethernet core seems to be reacting okay without us telling it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethoc: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+11
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phydev from struct net_devicePhilippe Reynes1-13/+7
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12net: ethoc: Correctly pad short packetsFlorian Fainelli1-0/+6
Even though the hardware can be doing zero padding, we want the SKB to be going out on the wire with the appropriate size. This fixes packet truncations observed with e.g: ARP packets. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12net: ethoc: Fix early error pathsFlorian Fainelli1-5/+5
In case any operation fails before we can successfully go the point where we would register a MDIO bus, we would be going to an error label which involves unregistering then freeing this yet to be created MDIO bus. Update all error paths to go to label free which is the only one valid until either the clock is enabled, or the MDIO bus is allocated and registered. This fixes kernel oops observed while trying to dereference the MDIO bus structure which is not yet allocated. Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01net/ethoc: fix null dereference on error exit pathColin Ian King1-3/+4
priv is assigned to NULL however some of the early error exit paths to label 'free' dereference priv, causing a null pointer dereference. Move the label 'free' to just the free_netdev statement, and add a new exit path 'free2' for the error cases were clk_disable_unprepare needs calling before the final free. Fixes issue found by CoverityScan, CID#113260 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net/ethoc: do not free array priv->mdio->irqColin Ian King1-1/+0
priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn1-2/+2
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn1-13/+1
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23net/ethoc: support big-endian register layoutMax Filippov1-2/+12
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: ethoc: Remove unnecessary #ifdef CONFIG_OFTobias Klauser1-6/+1
For !CONFIG_OF of_get_property() is defined to always return NULL. Thus there's no need to protect the call to of_get_property() with #ifdef CONFIG_OF. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: ethoc: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: ethernet: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser1-2/+0
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21net: ethoc: remove ethoc_configFlorian Fainelli1-6/+0
ethoc_config() returns -ENOSYS and does not implement anything useful, let's remove it such that net/core/dev_ioctl.c::dev_ifsioc can return something meaningful like -EOPNOTSUPP. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: ethoc: remove empty MDIO bus functionFlorian Fainelli1-6/+0
ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04net: ethoc: set up MII management bus clockMax Filippov1-2/+30
MII management bus clock is derived from the MAC clock by dividing it by MIIMODER register CLKDIV field value. This value may need to be set up in case it is undefined or its default value is too high (and communication with PHY is too slow) or too low (and communication with PHY is impossible). The value of CLKDIV is not specified directly, but is derived from the MAC clock for the default MII management bus frequency of 2.5MHz. The MAC clock may be specified in the platform data, or in the 'clocks' device tree attribute. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04net: ethoc: don't advertise gigabit speed on attached PHYMax Filippov1-0/+5
OpenCores 10/100 Mbps MAC does not support speeds above 100 Mbps, but does not disable advertisement when PHY supports them. This results in non-functioning network when the MAC is connected to a gigabit PHY connected to a gigabit switch. The fix is to disable gigabit speed advertisement on attached PHY unconditionally. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-01net: ethoc: implement ethtool get/set ring parametersMax Filippov1-0/+51
TX and RX rings share memory and descriptors. Maximal number of descriptors reported is one less than the total available nuber of descriptors. For the set operation the requested number of TX descriptors is rounded down to the nearest power of two (driver logic requirement). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-01net: ethoc: implement ethtool get registersMax Filippov1-0/+20
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-01net: ethoc: implement ethtool get/set settingsMax Filippov1-0/+24
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-01net: ethoc: implement basic ethtool operationsMax Filippov1-0/+6
The following methods are implemented: - get link state (standard implementation); - get timestamping info (standard implementation). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30net: ethoc: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ethoc: Cleanup driver formatBarry Grussling1-17/+17
Cleanup the format of ethoc.c to meet network driver style as per checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli1-2/+2
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethoc: fix mac address setJiri Pirko1-11/+11
Function ethoc_set_mac_address() was incorrectly using passed pointer as pointer to address, that is not correct. Struct sockaddr have to be be used here. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko1-1/+0
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: set dev->addr_assign_type correctlyJiri Pirko1-1/+1
Not a bitfield, but a plain value. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03net/ethernet: remove __dev* attributesBill Pemberton1-4/+4
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16ethernet: Use eth_random_addrJoe Perches1-1/+1
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings1-2/+2
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17ethoc: set addr_assign_type if random_ether_addr() usedDanny Kukawka1-2/+18
Set addr_assign_type correctly to NET_ADDR_RANDOM in case a random MAC address was generated and assigned to the netdevice. Fixed ethoc_set_mac_address() to check if the given mac address is valid and set also dev_addr of the net_device. Check also the return value of ethoc_set_mac_address() in ethoc_probe(). Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: set net_device->dev_addr in ethoc_set_mac_address(), check if given address is valid Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches1-1/+0
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30drivers/net: fix up stale paths from driver reorgPaul Gortmaker1-1/+1
The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/net/ethernet/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jonas Bonn <jonas@southpole.se> Cc: Sebastian Poehn <sebastian.poehn@belden.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31drivers/net: Add module.h to drivers who were implicitly using itPaul Gortmaker1-0/+1
The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+1
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12ethoc: Move the Avionic driverJeff Kirsher1-0/+1203
Move the Avionic driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 07:21:45 +0000