summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/dec
AgeCommit message (Collapse)AuthorFilesLines
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker2-10/+4
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net: tulip: rearrange order of searching for substringsRasmus Villemoes1-5/+5
Currently, two of the branches are dead code, since an earlier smaller substring would have been found ("TP" in the "TP_NW" case and either of "BNC" and "AUI" in the "BNC_AUI" case). Rearrange the strstr() calls so that the longer strings are searched for first. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03drivers/net/ethernet/dec/tulip/uli526x.c: fix misleading indentation in ↵David Malcolm1-1/+1
uli526x_timer This code in drivers/net/ethernet/dec/tulip/uli526x.c function "uli526x_timer": 1086 } else 1087 if ((tmp_cr12 & 0x3) && db->link_failed) { [...snip...] 1109 } 1110 else if(!(tmp_cr12 & 0x3) && db->link_failed) 1111 { [...snip...] 1117 } 1118 db->init=0; is misleadingly indented: the db->init=0 is indented as if part of the else clause at line 1086, but it is independent of it (no braces before the "if" at line 1087). This patch fixes the indentation to reflect the actual meaning of the code, though is it actually meant to be part of the "else" clause? (I'm a compiler developer, not a kernel person). It also adds spaces around the assignment, to placate checkpatch.pl. Seen via an experimental new gcc warning I'm working on for gcc 6, -Wmisleading-indentation, using gcc r223098 adding -Werror=misleading-indentation to KBUILD_CFLAGS in Makefile. The experimental GCC emits this warning (as an error), rightly IMHO: drivers/net/ethernet/dec/tulip/uli526x.c: In function ‘uli526x_timer’: drivers/net/ethernet/dec/tulip/uli526x.c:1118:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] db->init=0; ^ drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: note: ...this ‘else’ clause, but it is not } else ^ Hope this is helpful Dave Signed-off-by: David Malcolm <dmalcolm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13tulip_core.c : out-of-bounds check.Ameen Ali1-1/+1
Array index 'j' is used before limits check. Suggest put limit check before index use. Signed-off-by : <Ameenali023@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches2-2/+2
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/tulip: don't warn about unknown ARM architectureArnd Bergmann1-1/+1
ARM has 32-byte cache lines, which according to the comment in the init registers function seems to work best with the default value of 0x4800 that is also used on sparc and parisc. This adds ARM to the same list, to use that default but no longer warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09uli526x: fix misspelling of current function in stringJulia Lawall1-1/+1
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dmfe: fix misspelling of current function in stringJulia Lawall1-1/+1
The function name contains cleanup, not clean. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: tulip: Remove private "strncmp"Rasmus Villemoes1-17/+3
The comment says that the built-in strncmp didn't work. That is not surprising, as apparently "str" semantics are not really what is wanted (hint: de4x5_strncmp only stops when two different bytes are encountered or the end is reached; not if either byte happens to be 0). de4x5_strncmp is actually a memcmp (except for the signature and that bytes are not necessarily treated as unsigned char); since only the boolean value of the result is used we can just replace de4x5_strncmp with memcmp. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27tulip: dmfe: Fix global namespace pollution of phy accessors.David S. Miller1-76/+76
The dmfe driver has "phy_read()" and "phy_write()" functions, which we need to rename because the generic phy layer is about to export generic interfaces with the same name. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine7-8/+8
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-20net: tulip: remove unnecessary break after returnFabian Frederick1-1/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-22tulip: Poll link status more frequently for Comet chipsOndrej Zary1-1/+1
It now takes up to 60 seconds to detect cable (un)plug on ADMtek Comet chips. That's too slow and might cause people to think that it doesn't work at all. Poll link status every 2 seconds instead of 60 for ADMtek Comet chips. That should be fast enough while not stressing the system too much. Tested with ADMtek AN983B. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24uli526x: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.Eric W. Biederman1-2/+2
Replace dev_kfree_skb with dev_kfree_skb_any in uli562x_start_xmit that can be called in hard irq and other contexts, when the packet is dropped. Replace dev_kfree_skb with dev_consume_skb_any in uli562x_start_xmit that can be called in hard irq and other contexts, when the packet is transmitted. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-24dmfe: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.Eric W. Biederman1-2/+2
Replace dev_kfree_skb with dev_kfree_skb_any in dmfe_start_xmit that can be called in hard irq and other contexts, when the packet is dropped. Replace dev_kfree_skb with dev_consume_skb_any in dmfe_start_xmit that can be called in hard irq and other contexts, when the packet is transmitted. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-02-17drivers/net: tulip_remove_one needs to call pci_disable_device()Ingo Molnar1-0/+1
Otherwise the device is not completely shut down. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23tulip: cleanup by using ARRAY_SIZE()Dan Carpenter1-1/+1
In this situation then ARRAY_SIZE() and sizeof() are the same, but we're really dealing with array indexes and not byte offsets so ARRAY_SIZE() is cleaner. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker3-3/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03net: tulip: delete useless tests on netdev_privJulia Lawall1-6/+0
Netdev_priv performs an addition, not a pointer dereference, so it seems quite unlikely that its result would ever be NULL. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ statement S; @@ - if (!netdev_priv(...)) S // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22net: tulip: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21net: tulip: remove unnecessary pci_set_drvdata()Jingoo Han6-12/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-12net: tulip: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/dec/tulip/de4x5.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: tulip: use pci_{get,set}_drvdata()Jingoo Han1-1/+1
Use the wrapper functions for getting and setting the driver data using pci_dev instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02ethernet: Convert mac address uses of 6 to ETH_ALENJoe Perches1-3/+5
Use the normal #define to help grep find mac addresses and ensure that addresses are aligned. pasemi.h has an unaligned access to mac_addr, unchanged for now. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Olof Johansson <olof@lixom.net> # pasemi_mac pieces Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: Move MII out from under NET_CORE and hide itBen Hutchings1-1/+0
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+6
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13tulip: Properly check dma mapping resultNeil Horman1-0/+6
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31tulip: remove redundant D0 power state setYijing Wang1-6/+0
pci_enable_device() will set device power state to D0, so it's no need to do it again in tulip_init_one(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net/ethernet/dec/tulip/xircom_cb: Use module_pci_driver to register driverPeter Hüwe1-13/+1
Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17ethernet/tulip: DE4x5 needs VIRT_TO_BUSArnd Bergmann1-0/+1
The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches1-6/+3
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-01-22drivers/net: delete Digital EtherWorks-3 support.Paul Gortmaker4-2300/+0
This is another one that makes sense to target for obsolescence, since it (a)appeared pre-1995, and (b)was rather rare, and (c)did not really have any statistically significant active linux user base. Removing this ISA 10Mbit driver support is unlikely to be even noticed by the user base of 3.9+ linux kernels, especially when the documentation clearly indicates the vintage with this text: "...designed to work with all kernels > 1.1.33" Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-01-11drivers/net/ethernet/dec/tulip: remove depends on CONFIG_EXPERIMENTALKees Cook1-2/+2
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko1-4/+4
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman5-11/+6
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03tulip: remove __dev* attributesBill Pemberton9-50/+51
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28ewrk3: remove outdated commentPaul Bolle1-1/+0
Remove an outdated comment, that should have been removed in the patch named "MODULE_PARM conversions" from early 2005. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28ewrk3: silence GCC warningPaul Bolle1-1/+1
Building ewrk3.o triggers this GCC warning: drivers/net/ethernet/dec/ewrk3.c: In function '__check_irq': drivers/net/ethernet/dec/ewrk3.c:1915:1: warning: return from incompatible pointer type [enabled by default] This can be trivially fixed by changing the 'irq' parameter from int to byte (which is an alias for unsigned char for module parameters). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07drivers/net/ethernet/dec/tulip/dmfe.c: fix error return codePeter Senna Tschudin1-3/+9
The function dmfe_init_one() return 0 for success and negative value for most of its internal tests failures. There are three exceptions that are error cases going to err_out_*:. Fore this three cases the function abort its success execution path, but returns non negative value, making it dificult for a caller function to notice the error. This patch fixes the error cases that do not return negative values. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06drivers/net/ethernet/dec/tulip: Use standard __set_bit_le() functionTakuya Yoshikawa2-10/+4
To introduce generic set_bit_le() later, we remove our own definition and use a proper non-atomic bitops function: __set_bit_le(). Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Acked-by: Grant Grundler <grundler@parisc-linux.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06sections: fix section conflicts in drivers/netAndi Kleen2-2/+2
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-06ethernet: Remove casts to same typeJoe Perches1-1/+1
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10drivers/net: Convert compare_ether_addr to ether_addr_equalJoe Perches2-2/+3
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17dmfe: enforce consistent timing delay.françois romieu1-1/+5
The driver does not always use the same timing for what looks like the same operations. - DCR0 Use the same udelay everywhere for reset. Upper bound is 100 us. - DCR9 Use 5us delay for srom clock. 1us delay for phy_write_1bit (writes PHY_DATA_[01]) are not changed as they stay withing a 2,5MHz MDIO clock range. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07dmfe: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu1-142/+153
This is a pure PCI driver, no ISA here. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 22:29:46 +0000