summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/calxeda
AgeCommit message (Collapse)AuthorFilesLines
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-3/+2
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: calxeda: xgmac: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-9/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson1-15/+5
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches1-10/+10
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser1-1/+0
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02net: calxedaxgmac: fix driver dependenciesBartlomiej Zolnierkiewicz1-0/+1
Calxeda 1G/10G XGMAC Ethernet support should be available only on Calxeda ECX-1000/2000 (Highbank/Midway) platforms. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24xgmac: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.Eric W. Biederman1-3/+3
Replace dev_kfree_skb with dev_consume_skb_any in xgmac_tx_complete that can be called in hard irq and other contexts. Replace dev_kfree_skb with dev_kfree_skb_any in xgmac_xmit that can be called in hard irq and other contexts. dev_consume_skb_any is used in xgamc_tx_complete as skbs that reach there have been successfully transmitted, dev_kfree_skby_any is used in xgmac_xmit as skbs that are freed there are being dropped. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07net: calxedaxgmac: Fix panic caused by MTU change of active interfaceAndreas Herrmann1-6/+4
Changing MTU size of an xgmac network interface while it is active can cause a panic like skbuff: skb_over_panic: text:c03bc62c len:1090 put:1090 head:edfb6900 data:edfb6942 tail:0xedfb6d84 end:0xedfb6bc0 dev:eth0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 762 Comm: python Tainted: G W 3.10.0-00015-g3e33cd7 #309 task: edcfe000 ti: ed67e000 task.ti: ed67e000 PC is at skb_panic+0x64/0x70 LR is at wake_up_klogd+0x5c/0x68 This happens because xgmac_change_mtu modifies dev->mtu before the network interface is quiesced. And thus there still might be buffers in use which have a buffer size based on the old MTU. To fix this I moved the change of dev->mtu after the call to xgmac_stop. Another modification is required (in xgmac_stop) to ensure that xgmac_xmit is really not called anymore (xgmac_tx_complete might wake up the queue again). I've tested the fix by switching MTU size every second between 600 and 1500 while network traffic was going on. The test box survived a test of several hours (until I've stopped it) whereas w/o this fix above panic occurs after several minutes (at most). Change since v1: - remove call to netif_stop_queue at beginning of xgmac_stop - use netif_tx_disable instead of locking+netif_stop_queue Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net: calxedaxgmac: determine number of address filters at runtimeRob Herring1-4/+11
Highbank and Midway xgmac h/w have different number of MAC address filter registers with 7 and 31, respectively. Highbank has been wrong, so fix it and detect the number of filter registers at run-time. Unfortunately, the version register is the same on both SOCs, so simply test if write to the last filter register will take a value. It always reads as 0 if not. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net: calxedaxgmac: add uc and mc filter addresses in promiscuous modeRob Herring1-4/+2
Even in promiscuous mode, we need to add filter addresses for correct operation. This fixes silent failures when using a bridge and adding addresses using the "bridge fdb add" command. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net: calxedaxgmac: fix clearing of old filter addressesRob Herring1-2/+2
In commit 2ee68f621af280 (net: calxedaxgmac: fix various errors in xgmac_set_rx_mode), a fix to clean-up old address entries was added. However, the loop to zero out the entries failed to increment the register address resulting in only 1 entry getting cleared. Fix this to correctly use the loop index. Also, the end of the loop condition was off by 1 and should have been <= rather than <. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix xgmac_xmit DMA mapping error handlingRob Herring1-5/+26
On a DMA mapping error in xgmac_xmit, we should simply free the skb and return NETDEV_TX_OK rather than -EIO. In the case of errors in mapping frags, we need to undo everything that has been setup. Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix rx DMA mapping API size mismatchesRob Herring1-6/+12
Fix the mismatch in the DMA mapping and unmapping sizes for receive. The unmap size must be equal to the map size and should not be the actual received frame length. The map size should also be adjusted by the NET_IP_ALIGN size since the h/w buffer size (dma_buf_sz) includes this offset. Also, add a missing dma_mapping_error check in xgmac_rx_refill. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: remove some unused statistic countersRob Herring1-3/+0
rx_sa_filter_fail and tx_undeflow events are unused and impossible to occur based on how the h/w is used. We never filter on source MAC address and TX store and forward mode prevents underflow events. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix various errors in xgmac_set_rx_modeRob Herring1-4/+13
Fix xgmac_set_rx_mode to handle several conditions that were not handled correctly as Lennert Buytenhek describes: If we have, say, 100 unicast addresses, and 5 multicast addresses, the unicast address count check will evaluate to true, and set use_hash to true. The multicast address check will however evaluate to false, and use_hash won't be set to true again, and XGMAC_FRAME_FILTER_HMC won't be OR'd into XGMAC_FRAME_FILTER, but since use_hash was still true from the unicast check, netdev_for_each_mc_addr() will program the multicast addresses into the hash table instead of using the MAC address registers, but since the HMC bit wasn't set, the hash table won't be checked for multicast addresses on receive, and we'll stop receiving multicast packets entirely. Also, there is no code that zeroes out MAC address registers reg..31 at the end of this function, meaning that under the right conditions, unicast/multicast addresses that were previously in the filter but were then deleted won't be cleared out. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: enable interrupts after napi_enableRob Herring1-3/+5
Fix a race condition where the interrupt handler may have called napi_schedule before napi_enable is called. This would disable interrupts and never actually schedule napi to run. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix race with tx queue stop/wakeRob Herring1-5/+15
Since the xgmac transmit start and completion work locklessly, it is possible for xgmac_xmit to stop the tx queue after the xgmac_tx_complete has run resulting in the tx queue never being woken up. Fix this by ensuring that ring buffer index updates are visible and recheck the ring space after stopping the queue. Also fix an off-by-one bug where we need to stop the queue when the ring buffer space is equal to MAX_SKB_FRAGS. The implementation used here was copied from drivers/net/ethernet/broadcom/tg3.c. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: update ring buffer tx_head after barriersRob Herring1-1/+2
Ensure that the descriptor writes are visible before the ring buffer head is updated. Since writel is a barrier, we can simply update the head after the writel. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix possible skb free before tx completeRob Herring1-31/+24
The TX completion code may have freed an skb before the entire sg list was transmitted. The DMA unmap calls for the fragments could also get skipped. Now set the skb pointer on every entry in the ring, not just the head of the sg list. We then use the FS (first segment) bit in the descriptors to determine skb head vs. fragment. This also fixes similar bug in xgmac_free_tx_skbufs where clean-up of a sg list that wraps at the end of the ring buffer would not get unmapped. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: fix race between xgmac_tx_complete and xgmac_tx_errRob Herring1-20/+18
It is possible for the xgmac_tx_complete to run concurrently with xgmac_tx_err since there are no locks. Fix this by moving the tx error handling to a workqueue so we can disable napi while we reset the transmitter. Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: read correct field in xgmac_desc_get_buf_lenRob Herring1-1/+1
xgmac_desc_get_buf_len appears to have a copy/paste error. flags is the wrong field to read. We should be reading buf_size field. cpu_to_le32 should also be le32_to_cpu. This never really mattered as this function is only used for DMA mapping calls which happen to be nops with coherent DMA. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: calxedaxgmac: remove NETIF_F_FRAGLIST settingRob Herring1-1/+1
The xgmac does not actually handle frag lists, so this option should not be set. It does not appear to have had any impact though. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `xgmac_xmit': drivers/net/ethernet/calxeda/xgmac.c:1102: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25net: calxedaxgmac: fix condition in xgmac_set_features()Dan Carpenter1-1/+1
The "changed" variable should be a 64 bit type, otherwise it can't store all the features. The way the code is now the test for whether NETIF_F_RXCSUM changed is always false and we return immediately. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16xgmac: Remove unneeded PM_OPS definitionsFabio Estevam1-5/+2
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29net: calxedaxgmac: Wake-on-LAN fixesRob Herring1-1/+5
WOL is broken because the magic packet status bit is getting set rather than the enable bit. The PMT interrupt is not getting serviced because the PMT interrupt is also enabled on the global interrupt, but not cleared by the global interrupt and the global interrupt is higher priority. This fixes both of these issues to get WOL working. There's still a problem with receive after resume, but at least now we can wake-up. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29net: calxedaxgmac: fix rx ring handling when OOMRob Herring1-0/+3
If skb allocation for the rx ring fails repeatedly, we can reach a point were the ring is empty. In this condition, the driver is out of sync with the h/w. While this has always been possible, the removal of the skb recycling seems to have made triggering this problem easier. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net: calxedaxgmac: throw away overrun framesRob Herring1-0/+4
The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko1-1/+0
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: ip align receive buffersRob Herring1-5/+6
On gcc 4.7, we will get alignment traps in the ip stack if we don't align the ip headers on receive. The h/w can support this, so use ip aligned allocations. Cut down the unnecessary padding on the allocation. The buffer can start on any byte alignment, but the size including the begining offset must be 8 byte aligned. So the h/w buffer size must include the NET_IP_ALIGN offset. Thanks to Eric Dumazet for the initial patch highlighting the padding issues. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: rework transmit ring handlingRob Herring1-12/+12
Only generate tx interrupts on every ring size / 4 descriptors. Move the netif_stop_queue call to the end of the xmit function rather than checking at the beginning. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: drop some unnecessary register writesRob Herring1-6/+0
The interrupts have already been cleared, so we don't need to clear them again. Also, we could miss interrupts if they are cleared, but we don't process the packet. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: use raw i/o accessors in rx and tx pathsRob Herring1-6/+6
The standard readl/writel accessors involve a spinlock and cache sync operation on ARM platforms with an outer cache. Only DMA triggering accesses need this, so use the raw variants instead in the critical paths. The relaxed variants would be more appropriate, but don't exist on all arches. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: remove explicit rx dma buffer pollingRob Herring1-3/+1
New received frames will trigger the rx DMA to poll the DMA descriptors, so there is no need to tell the h/w to poll. We also want to enable dropping frames from the fifo when there is no buffer. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: enable operate on 2nd frame modeRob Herring1-2/+2
Enable the tx dma to start reading the next frame while sending the current frame. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07net: remove skb recyclingEric Dumazet1-17/+2
Over time, skb recycling infrastructure got litle interest and many bugs. Generic rx path skb allocation is now using page fragments for efficient GRO / TCP coalescing, and recyling a tx skb for rx path is not worth the pain. Last identified bug is that fat skbs can be recycled and it can endup using high order pages after few iterations. With help from Maxime Bizon, who pointed out that commit 87151b8689d (net: allow pskb_expand_head() to get maximum tailroom) introduced this regression for recycled skbs. Instead of fixing this bug, lets remove skb recycling. Drivers wanting really hot skbs should use build_skb() anyway, to allocate/populate sk_buff right before netif_receive_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: enable rx cut-thru modeRob Herring1-2/+3
Enabling RX cut-thru mode yields better performance as received frames start getting written to memory before a whole frame is received. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: set outstanding AXI bus transactions to 8Rob Herring1-1/+1
Increase the number of outstanding read and write AXI transactions from 1 to 8 for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: fix hang on rx refillRob Herring1-15/+12
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This can happen on a rx error when we just leave the skb allocated to the entry. [ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies) [ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4) [ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) [ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48) [ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94) [ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8) [ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) [ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24) [ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) [ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c) [ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c) [ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8) [ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) [ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc) [ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200) [ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc) Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: fix net timeout recoveryRob Herring1-0/+1
Fix net tx watchdog timeout recovery. The descriptor ring was reset, but the DMA engine was not reset to the beginning of the ring. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka1-1/+2
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05xgmac: cleanupsstephen hemminger1-2/+2
Make local function static, make ethtool_ops const. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-27net: calxeda xgmac ethernet driver add missing HAS_IOMEM dependencyHeiko Carstens1-1/+1
Fix allyesconfig build on architectures without IOMEM: drivers/net/ethernet/calxeda/xgmac.c:1800:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: add calxeda xgmac ethernet driverRob Herring3-0/+1936
Add support for the XGMAC 10Gb ethernet device in the Calxeda Highbank SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>