summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence
AgeCommit message (Collapse)AuthorFilesLines
2022-01-06net: macb: use .mac_select_pcs() interfaceRussell King (Oracle)2-15/+14
Convert the PCS selection to use mac_select_pcs, which allows the PCS to perform any validation it needs. We must use separate phylink_pcs instances for the USX and SGMII PCS, rather than just changing the "ops" pointer before re-setting it to phylink as this interface queries the PCS, rather than requesting it to be changed. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-25net: macb: convert to phylink_generic_validate()Russell King (Oracle)1-103/+30
Populate the supported interfaces bitmap and MAC capabilities mask for the macb driver and remove the old validate implementation. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22Fix coverity issue 'Uninitialized scalar variable"Yacov Simhony1-1/+1
There are three boolean variable which were not initialized and later being used in the code. Signed-off-by: Yacov Simhony <ysimhony@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: macb: Fix several edge cases in validateSean Anderson1-39/+73
There were several cases where validate() would return bogus supported modes with unusual combinations of interfaces and capabilities. For example, if state->interface was 10GBASER and the macb had HIGH_SPEED and PCS but not GIGABIT MODE, then 10/100 modes would be set anyway. In another case, SGMII could be enabled even if the mac was not a GEM (despite this being checked for later on in mac_config()). These inconsistencies make it difficult to refactor this function cleanly. There is still the open question of what exactly the requirements for SGMII and 10GBASER are, and what SGMII actually supports. If someone from Cadence (or anyone else with access to the GEM/MACB datasheet) could comment on this, it would be greatly appreciated. In particular, what is supported by Cadence vs. vendor extension/limitation? To address this, the current logic is split into three parts. First, we determine what we support, then we eliminate unsupported interfaces, and finally we set the appropriate link modes. There is still some cruft related to NA, but this can be removed in a future patch. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211112190400.1937855-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: macb: Fix mdio child node detectionGuenter Roeck1-1/+1
Commit 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") added code to detect if a 'mdio' child node exists to the macb driver. Ths added code does, however, not actually check if the child node exists, but if the parent node exists. This results in errors such as macb 10090000.ethernet eth0: Could not attach PHY (-19) if there is no 'mdio' child node. Fix the code to actually check for the child node. Fixes: 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211026173950.353636-1-linux@roeck-us.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson1-6/+5
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: macb: Use mdio child node for MDIO bus if it existsSean Anderson1-0/+11
This allows explicitly specifying which children are present on the mdio bus. Additionally, it allows for non-phy MDIO devices on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: manually convert memcpy(dev_addr,..., sizeof(addr))Jakub Kicinski1-1/+1
A handful of drivers use sizeof(addr) for the size of the address, after manually confirming the size is indeed 6 convert them to eth_hw_addr_set(). Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petko Manolov <petkan@nucleusys.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04net: ethernet: use phylink_set_10g_modes()Russell King (Oracle)1-6/+1
Update three drivers to use the new phylink_set_10g_modes() helper: Cadence macb, Freescale DPAA2 and Marvell PP2. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30net: macb: ptp: Switch to gettimex64() interfaceLars-Peter Clausen1-4/+9
The macb PTP support currently implements the `gettime64` callback to allow to retrieve the hardware clock time. Update the implementation to provide the `gettimex64` callback instead. The difference between the two is that with `gettime64` a snapshot of the system clock is taken before and after invoking the callback. Whereas `gettimex64` expects the callback itself to take the snapshots. To get the time from the macb Ethernet core multiple register accesses have to be done. Only one of which will happen at the time reported by the function. This leads to a non-symmetric delay and adds a slight offset between the hardware and system clock time when using the `gettime64` method. This offset can be a few 100 nanoseconds. Switching to the `gettimex64` method allows for a more precise correlation of the hardware and system clocks and results in a lower offset between the two. On a Xilinx ZynqMP system `phc2sys` reports a delay of 1120 ns before and 300 ns after the patch. With the latter being mostly symmetric. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: enable mii on rgmii for sama7g5Claudiu Beznea1-2/+4
Both MAC IPs available on SAMA7G5 support MII on RGMII feature. Enable these by adding proper capability to proper macb_config objects. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: add support for mii on rgmiiClaudiu Beznea2-0/+6
Cadence IP has option to enable MII support on RGMII interface. This could be selected though bit 28 of network control register. This option is not enabled on all the IP versions thus add a software capability to be selected by the proper implementation of this IP. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: align for OSSMODE offsetClaudiu Beznea1-1/+1
Align for OSSMODE offset. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: add description for SRTSMClaudiu Beznea1-1/+1
Add description for SRTSM bit. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net: macb: fix use after free on rmmodTong Zhang1-1/+1
plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+10
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-25net: macb: Add a NULL check on desc_ptpHarini Katakam1-1/+10
macb_ptp_desc will not return NULL under most circumstances with correct Kconfig and IP design config register. But for the sake of the extreme corner case, check for NULL when using the helper. In case of rx_tstamp, no action is necessary except to return (similar to timestamp disabled) and warn. In case of TX, return -EINVAL to let the skb be free. Perform this check before marking skb in progress. Fixes coverity warning: (4) Event dereference: Dereferencing a null pointer "desc_ptp" Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann1-0/+1
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13net: macb: Add PTP support for SAMA5D29Hari Prasath1-0/+9
Add PTP capability to the macb config object for sama5d29. Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com> Link: https://lore.kernel.org/r/20210812074422.13487-1-Hari.PrasathGE@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07net: macb: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-2/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-23net: macb: ensure the device is available before accessing GEMGXL control ↵Zong Li1-0/+3
registers If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: cadence: Demote non-compliant kernel-doc headersYang Shen2-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/cadence/macb_pci.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/ethernet/cadence/macb_ptp.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: macb: Remove redundant assignment to queueJiapeng Chong1-2/+2
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-14net: macb: fix the restore of cmp registersClaudiu Beznea1-1/+1
Commit a14d273ba159 ("net: macb: restore cmp registers on resume path") introduces the restore of CMP registers on resume path. In case the IP doesn't support type 2 screeners (zero on DCFG8 register) the struct macb::rx_fs_list::list is not initialized and thus the list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in commit a14d273ba159 ("net: macb: restore cmp registers on resume path") will access an uninitialized list leading to crash. Thus, initialize the struct macb::rx_fs_list::list without taking into account if the IP supports type 2 screeners or not. Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-8/+3
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+7
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-02net: macb: restore cmp registers on resume pathClaudiu Beznea1-0/+7
Restore CMP screener registers on resume path. Fixes: c1e85c6ce57ef ("net: macb: save/restore the remaining registers and features") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17net: macb: simplify clk_init with dev_err_probeMichael Tretter1-11/+9
On some platforms, e.g., the ZynqMP, devm_clk_get can return -EPROBE_DEFER if the clock controller, which is implemented in firmware, has not been probed yet. As clk_init is only called during probe, use dev_err_probe to simplify the error message and hide it for -EPROBE_DEFER. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12net: macb: Disable PCS auto-negotiation for SGMII fixed-link modeRobert Hancock2-0/+30
When using a fixed-link configuration in SGMII mode, it's not really sensible to have auto-negotiation enabled since the link settings are fixed by definition. In other configurations, such as an SGMII connection to a PHY, it should generally be enabled. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12net: macb: poll for fixed link state in SGMII modeRobert Hancock1-0/+14
When using a fixed-link configuration with GEM in SGMII mode, such as for a chip-to-chip interconnect, the link state was always showing as established regardless of the actual connectivity state. We can monitor the pcs_link_state bit in the Network Status register to determine whether the PCS link state is actually up. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03net: macb: Add default usrio config to default gem configAtish Patra1-7/+8
There is no usrio config defined for default gem config leading to a kernel panic devices that don't define a data. This issue can be reprdouced with microchip polar fire soc where compatible string is defined as "cdns,macb". Fixes: edac63861db7 ("add userio bits as platform configuration") Signed-off-by: Atish Patra <atish.patra@wdc.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-21net: macb: ignore tx_clk if MII is usedMichael Walle1-0/+4
If the MII interface is used, the PHY is the clock master, thus don't set the clock rate. On Zynq-7000, this will prevent the following warning: macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120194303.28268-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flagCharles Keepax1-1/+1
A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of macb_set_tx_clk were gated on the presence of this flag. - if (!clk) + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) However the flag was not added to anything other than the new sama7g5_gem, turning that function call into a no op for all other systems. This breaks the networking on Zynq. The commit message adding this states: a new capability so that macb_set_tx_clock() to not be called for IPs having this capability This strongly implies that present of the flag was intended to skip the function not absence of the flag. Update the if statement to this effect, which repairs the existing users. Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10Revert "macb: support the two tx descriptors on at91rm9200"Willy Tarreau2-40/+8
This reverts commit 0a4e9ce17ba77847e5a9f87eed3c0ba46e3f82eb. The code was developed and tested on an MSC313E SoC, which seems to be half-way between the AT91RM9200 and the AT91SAM9260 in that it supports both the 2-descriptors mode and a Tx ring. It turns out that after the code was merged I could notice that the controller would sometimes lock up, and only when dealing with sustained bidirectional transfers, in which case it would report a Tx overrun condition right after having reported being ready, and will stop sending even after the status is cleared (a down/up cycle fixes it though). After adding lots of traces I couldn't spot a sequence pattern allowing to predict that this situation would happen. The chip comes with no documentation and other bits are often reported with no conclusive pattern either. It is possible that my change is wrong just like it is possible that the controller on the chip is bogus or at least unpredictable based on existing docs from other chips. I do not have an RM9200 at hand to test at the moment and a few tests run on a more recent 9G20 indicate that this code path cannot be used there to test the code on a 3rd platform. Since the MSC313E works fine in the single-descriptor mode, and that people using the old RM9200 very likely favor stability over performance, better revert this patch until we can test it on the original platform this part of the driver was written for. Note that the reverted patch was actually tested on MSC313E. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/ Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: add support for sama7g5 emac interfaceClaudiu Beznea1-0/+9
Add support for SAMA7G5 10/100Mbps interface. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: add support for sama7g5 gem interfaceClaudiu Beznea1-0/+17
Add support for SAMA7G5 gigabit ethernet interface. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: unprepare clocks in case of failureClaudiu Beznea1-6/+18
Unprepare clocks in case of any failure in fu540_c000_clk_init(). Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: add function to disable all macb clocksClaudiu Beznea1-17/+21
Add function to disable all macb clocks. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: add capability to not set the clock rateClaudiu Beznea2-9/+10
SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or by the external clock provided by the PHY. The internal IP logic divides properly this clock depending on the link speed. The patch adds a new capability so that macb_set_tx_clock() to not be called for IPs having this capability (the clock rate, in case of generic clock, is set at the boot time via device tree and the driver only enables it). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: macb: add userio bits as platform configurationClaudiu Beznea2-4/+34
This is necessary for SAMA7G5 as it uses different values for PHY interface and also introduces hdfctlen bit. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-04ethernet: select CONFIG_CRC32 as neededArnd Bergmann1-0/+1
A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by: Mark Einon <mark.einon@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14net: macb: Fix passing zero to 'PTR_ERR'YueHaibing1-8/+2
Check PTR_ERR with IS_ERR to fix this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07net: macb: fix NULL dereference due to no pcs_config methodParshuram Thombare1-2/+15
This patch fixes NULL pointer dereference due to NULL pcs_config in pcs_ops. Fixes: e4e143e26ce8 ("net: macb: add support for high speed interface") Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Link: https://lore.kernel.org/netdev/2db854c7-9ffb-328a-f346-f68982723d29@microchip.com/ Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1604599113-2488-1-git-send-email-pthombar@cadence.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 20:47:31 +0000