summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/brocade
AgeCommit message (Collapse)AuthorFilesLines
2017-10-18bna: Convert timers to use timer_setup()Kees Cook1-24/+19
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Rasesh Mody <rasesh.mody@cavium.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Cc: Dept-GELinuxNICDev@cavium.com Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08bna: ethtool: Avoid reading past end of bufferKees Cook1-2/+2
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08bna: Avoid reading past end of bufferKees Cook1-1/+1
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24bna: avoid writing uninitialized data into hw registersArnd Bergmann1-3/+7
The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21bna: integer overflow bug in debugfsDan Carpenter1-1/+1
We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-4/+2
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17bna: use designated initializersKees Cook1-4/+4
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: brocade: bna: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-24/+30
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Rasesh Mody <Rasesh.Mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09bna: Add synchronization for tx ring.Benjamin Poirier1-2/+2
We received two reports of BUG_ON in bnad_txcmpl_process() where hw_consumer_index appeared to be ahead of producer_index. Out of order write/read of these variables could explain these reports. bnad_start_xmit(), as a producer of tx descriptors, has a few memory barriers sprinkled around writes to producer_index and the device's doorbell but they're not paired with anything in bnad_txcmpl_process(), a consumer. Since we are synchronizing with a device, we must use mandatory barriers, not smp_*. Also, I didn't see the purpose of the last smp_mb() in bnad_start_xmit(). Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson1-3/+4
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-28/+29
2016-09-17bna: fix crash in bnad_get_strings()Ivan Vecera1-27/+23
Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna driver foolishly depends on the structure. It uses part of it for ethtool statistics and it's not bad but the driver assumes its size is constant as it defines string for each existing entry. The problem occurs when the structure is extended because you need to modify bna driver as well. If not any attempt to retrieve ethtool statistics results in crash in bnad_get_strings(). The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of strings in the array and also removes rtnl_link_stats64 entries that are not used in output and are always zero. Fixes: 6e7333d "net: add rx_nohandler stat counter" Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17bna: add missing per queue ethtool statIvan Vecera1-1/+6
Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bna: remove global bnad_list_mutexIvan Vecera1-20/+0
Remove global bnad_list_mutex as it is not used anymore. This makes bnad_add_to_list() and bnad_remove_from_list() empty so remove them too. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bna: change type of bna_id to atomic_tIvan Vecera1-2/+2
Change type of bna_id to atomic_t. The bnad_list_mutex is used to prevent a race when bna_id is incremented. After the change the mutex can be removed in the next step. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bna: remove useless linked listIvan Vecera2-4/+0
Remove global variable bnad_list and bnad->list_entry that are used as list of bna driver instances. It is not necessary and useless. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: bna: use correct type specifier (2)xypron.glpk@gmx.de1-1/+2
add and val are read with sscanf(kern_buf, "%x:%x", &addr, &val); and used as arguments for bna_reg_offset_check and writel so they have to be unsigned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: bna: use correct type specificationsxypron.glpk@gmx.de1-1/+2
addr and len are read with sscanf(kern_buf, "%x:%x", &addr, &len); and used as arguments for bna_reg_offset_check. So they have to be unsigned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bna: fix list corruptionIvan Vecera1-1/+1
Use list_move_tail() to move MAC address entry from list of pending to list of active entries. Simple list_add_tail() leaves the entry also in the first list, this leads to list corruption. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15bna: fix Rx data corruption with VLAN stripping enabled and MTU > 4096Ivan Vecera1-13/+24
The multi-buffer Rx mode implemented in the past introduced a regression that causes a data corruption for received VLAN traffic when VLAN tag stripping is enabled. This mode is supported only be newer chipsets (1860) and is enabled when MTU > 4096. When this mode is enabled Rx queue contains buffers with fixed size 2048 bytes. Any incoming packet larger than 2048 is divided into multiple buffers that are attached as skb frags in polling routine. The driver assumes that all buffers associated with a packet except the last one is fully used (e.g. packet with size 5000 are divided into 3 buffers 2048 + 2048 + 904 bytes) and ignores true size reported in completions. This assumption is usually true but not when VLAN packet is received and VLAN tag stripping is enabled. In this case the first buffer is 2044 bytes long but as the driver always assumes 2048 bytes then 4 extra random bytes are included between the first and the second frag. Additionally the driver sets checksum as correct so the packet is properly processed by the core. The driver needs to check the size of used space in each Rx buffer reported by FW and not blindly use the fixed value. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29bna: fix error handlingAndrzej Hajda1-6/+7
Several functions can return negative value in case of error, so their return type should be fixed as well as type of variables to which this value is assigned. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20bna: check for dma mapping errorsIvan Vecera5-1/+37
Check for DMA mapping errors, recover from them and register them in ethtool stats like other errors. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10bna: fix interrupts storm caused by erroneous packetsIvan Vecera1-1/+1
The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa33 ("bna: Enable Multi Buffer RX") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker1-3/+1
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: remove superfluous parenthesesIvan Vecera6-66/+66
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: make pointers to read-only inputs constIvan Vecera4-21/+20
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: remove unnecessary cast of BIT valueIvan Vecera2-4/+3
BIT value is already unsigned so casting is not necessary. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use netdev_* and dev_* instead of printk and pr_*Ivan Vecera4-55/+36
...and remove some of them. It is not necessary to log when .probe() and .remove() are called or when TxQ is started or stopped. Also log level of some of them was changed to more appropriate one (link up/down, firmware loading failure. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: fix timeout API argument typeIvan Vecera3-19/+13
Timeout functions are defined with 'void *' ptr argument. They should be defined directly with 'struct bfa_ioc *' type to avoid type conversions. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use list_for_each_entry where appropriateIvan Vecera4-149/+37
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: get rid of private macros for manipulation with listsIvan Vecera7-308/+130
Remove macros for manipulation with struct list_head and replace them with standard ones. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove useless pointer assignmentIvan Vecera1-1/+0
Pointer cmpl used to iterate through completion entries is updated at the beginning of while loop as well as at the end. The update at the end of the loop is useless. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use memdup_user to copy userspace buffersIvan Vecera1-19/+8
Patch converts kzalloc->copy_from_user sequence to memdup_user. There is also one useless assignment of NULL to bnad->regdata as it is followed by assignment of kzalloc output. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: correct comparisons/assignments to boolIvan Vecera1-4/+4
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove TX_E_PRIO_CHANGE event and BNA_TX_F_PRIO_CHANGED flagIvan Vecera2-19/+4
TX_E_PRIO_CHANGE event is never sent for bna_tx so it doesn't need to be handled. After this change bna_tx->flags cannot contain BNA_TX_F_PRIO_CHANGED flag and it can be also eliminated. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove paused from bna_rx_config and flags from bna_rxfIvan Vecera2-41/+1
The bna_rx_config struct member paused can be removed as it is never written and as it cannot have non-zero value the bna_rxf struct member flags also cannot have BNA_RXF_F_PAUSED value and is always zero. So the flags member can be removed as well as bna_rxf_flags enum and the code-paths that needs to have non-zero bna_rxf->flags. This clean-up makes bna_rxf_sm_paused state unsed and can be also removed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove RXF_E_PAUSE and RXF_E_RESUME eventsIvan Vecera2-77/+0
RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait and function bna_rxf_fltr_clear are unused after this so remove them also. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove prio_change_cbfn oper_state_cbfn from struct bna_txIvan Vecera2-16/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove oper_state_cbfn from struct bna_rxfIvan Vecera3-25/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove pause_cbfn from struct bna_enetIvan Vecera2-18/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove unused cbfn parameterIvan Vecera5-59/+25
removed: bna_rx_ucast_add bna_rx_ucast_del simplified: bna_enet_pause_config bna_rx_mcast_delall bna_rx_mcast_listset bna_rx_mode_set bna_rx_ucast_listset bna_rx_ucast_set Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use BIT(x) instead of (1 << x)Ivan Vecera6-83/+83
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: get rid of duplicate and unused macrosIvan Vecera8-163/+9
replaced macros: BNA_MAC_IS_EQUAL -> ether_addr_equal BNA_POWER_OF_2 -> is_power_of_2 BNA_TO_POWER_OF_2_HIGH -> roundup_pow_of_two removed unused macros: bfa_fsm_get_state bfa_ioc_clr_stats bfa_ioc_fetch_stats bfa_ioc_get_alt_ioc_fwstate bfa_ioc_isr_mode_set bfa_ioc_maxfrsize bfa_ioc_mbox_cmd_pending bfa_ioc_ownership_reset bfa_ioc_rx_bbcredit bfa_ioc_state_disabled bfa_sm_cmp_state bfa_sm_get_state bfa_sm_send_event bfa_sm_set_state bfa_sm_state_decl BFA_STRING_32 BFI_ADAPTER_IS_{PROTO,TTV,UNSUPP) BFI_IOC_ENDIAN_SIG BNA_{C,RX,TX}Q_PAGE_INDEX_MAX BNA_{C,RX,TX}Q_PAGE_INDEX_MAX_SHIFT BNA_{C,RX,TX}Q_QPGE_PTR_GET BNA_IOC_TIMER_FREQ BNA_MESSAGE_SIZE BNA_QE_INDX_2_PTR BNA_QE_INDX_RANGE BNA_Q_GET_{C,P}I BNA_Q_{C,P}I_ADD BNA_Q_FREE_COUNT BNA_Q_IN_USE_COUNT BNA_TO_POWER_OF_2 containing_rec Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: replace pragma(pack) with attribute __packedIvan Vecera6-127/+103
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: get rid of mac_tIvan Vecera12-32/+26
The patch converts mac_t type to widely used 'u8 [ETH_ALEN]'. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use ether_addr_copy instead of memcpyIvan Vecera2-18/+16
Parameters of all ether_addr_copy instances were checked for proper alignment. Alignment of bnad_bcast_addr is forced to 2 as the implicit alignment is 1. I have also renamed address parameter of bnad_set_mac_address() to addr. The name mac_addr was a little bit confusing as the real parameter is struct sockaddr *. v2: added __aligned directive to bnad_bcast_addr, renamed parameter of bnad_set_mac_address() (thx joe@perches.com) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10bna: remove obsolete use of EXTRA_CFLAGSJiri Slaby1-2/+0
EXTRA_CFLAGS should be used on the command line only. Since EXTRA_CFLAGS here add only a non-existant path to compiler include paths (by -I), remove EXTRA_CFLAGS completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30bna: fix soft lock-up during firmware initialization failureIvan Vecera1-2/+2
Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 08:16:23 +0000