summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2012-03-21cnic: Fix parity error code conflictMichael Chan3-34/+10
The recently added parity error handling used an error code that was already defined for a different error. This could lead to bnx2x firmware assert. We need to fix this with new error codes that are defined for parity error only. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21tg3: Fix RSS ring refill race conditionMichael Chan2-3/+23
The RSS feature in tg3 hardware has only one rx producer ring for all RSS rings. NAPI vector 1 is special and handles the refilling of the rx producer ring on behalf of all RSS rings. There is a race condition between these RSS NAPIs and the NAPI[1]. If NAPI[1] finishes checking for refill and then another RSS ring empties the rx producer ring before NAPI[1] exits NAPI, the chip will be completely out of SKBs in the rx producer ring. We fix this by adding a flag tp->rx_refill and rely on napi_schedule()/ napi_complete() to help synchronize it to close the race condition. Update driver version to 3.123. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: validate FW trace prior to its printingDmitry Kravkov2-1/+13
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: consistent statistics for old FWYuval Mintz3-41/+6
Previously applied patch making the bnx2x statistics consistent did not apply to old FWs. This remedies it, extending the consistent behaviour to all drivers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: changed iscsi/fcoe mac init and macrosDmitry Kravkov4-44/+64
This includes changes in macros to better distinguish between the two protocols, and slightly changed the way their macs are set. Notice this file contains string print lines with more than 80 characters, as to not break prints. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: added TLV_NOT_FOUND flags to the dcbDmitry Kravkov2-7/+17
The new error flags are supported by the bnx2x FW. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: changed initial dcb configurationDmitry Kravkov1-29/+16
The changes were mostly made to enable back-to-back data flow with dcb. Other changes were simply deemed as a better 'clean' initial configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: removed dcb unused codeYuval Mintz1-20/+0
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: reduced sparse warningsYuval Mintz6-29/+18
This patch reduces sparse warnings in the bnx2x code, mostly by changing functions into static and changing initialization of structures. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: revised driver printsMerav Sicron9-727/+694
We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: added 'likely' to fast-path skb existenceYuval Mintz1-1/+2
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-46/+41
2012-03-16bnx2x: fix memory leak in bnx2x_init_firmware()Michal Schmidt1-26/+24
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16bnx2x: fix a crash on corrupt firmware fileMichal Schmidt1-0/+1
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: code doesn't use stats for allocating Rx BDsDmitry Kravkov1-8/+9
Previously, allocation used queue statistics directly in its calcualtion. This change causes these calculations to be summed into the statistics, without being affected by them. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: ethtool returns req. AN even when AN failsYuval Mintz1-1/+1
Previously, if autoneg failed, ethtool would return the achieved autoneg. This patch corrects this, causing ethtool to return the requested autoneg capabilities even if autoneg fails. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: ethtool now returns unknown speed/duplexYuval Mintz1-11/+18
Previously, unless both interface and link were up, ethtool returned the requested speed/duplex when asked for the interface's settings. This change will now enable the driver to answer correctly (i.e., return unknown as its answer). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: mark functions as loaded on shared memoryYuval Mintz1-0/+17
This change enables the FW to make more accurate decisions regarding the active functions. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: use param's id instead of sp_obj's idYuval Mintz3-1/+5
Previously, we've used the object's function id instead of using the input's value. This is remedied, as in other flows. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: set_one_mac_e1x uses raw's state as inputYuval Mintz1-1/+1
Previously, we used a hard-coded value as paramater, instead of using the input's value. This is now remedied, as in other flows. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: removed unused function bnx2x_queue_set_cos_cidYuval Mintz1-7/+0
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: move LLH_CAM to header, apply naming conventionsYuval Mintz2-9/+11
These definitions are united into the header. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: FCoE statistics id fixedYuval Mintz1-3/+9
FCoE statistics ids were distinguished from the L2's statistics ids. However, not all of the change was committed. This causes a possible collision of indices when FCoE is present. This patch fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: dcb bit indices flags used as bitsYuval Mintz2-4/+6
DCB flags were updated using the flags' bit offsets instead of the actual bits. This is now fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: added cpu_to_le16 when preparing ramrod's dataAriel Elior1-1/+1
Fixed endianess issue when passing arguments to FW. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: pfc statistics counts pfc events twiceYuval Mintz1-12/+0
When pfc statistics were counted, the delta change from last count was summed twice. This fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+3
2012-03-06tg3: Fix to use multi queue BQL interfacesTom Herbert1-3/+3
Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert <therbert@google.com> Reported-by: Christoph Lameter <cl@gentwo.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04tg3: Recode PCI MRRS adjustment as a PCI quirkMatt Carlson1-6/+0
This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04tg3: Fix poor tx performance on 57766 after MTU changeMichael Chan1-2/+8
GRC reset causes the read DMA engine to go into a mode that breaks up requests into 256 bytes. A PHY reset is required to bring it back to the normal mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04tg3: Add memory barriers to sync BD dataMichael Chan1-0/+9
for weak memory model architectures to ensure that the chip will DMA valid BD data. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04tg3: Fix jumbo loopback test on 5719Michael Chan1-3/+11
Loopback on 9K packet fails because the chip has a DMA limit of 4K. The loopback test logic uses a single BD for simplicity. Fix it by reducing the jumbo packet size to the DMA limit. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-02net: dcb: getnumtcs()/setnumtcs() should return an intJohn Fastabend1-2/+2
{g|s}etnumtcs() today returns a u8 that is only used by the DCB code to verify no error occurred. Today the driver implementations return negative error codes which end up being non-zero so the logic works out but triggers some sparse warnings. To fix the sparse warnings convert the return value to an int. CC: Eilon Greenstein <eilong@broadcom.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-21/+22
Conflicts: drivers/net/ethernet/broadcom/tg3.c Conflicts in the statistics regression bug fix from 'net', but happily Matt Carlson originally posted the fix against 'net-next' so I used that to resolve this. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-29tg3: Fix tg3_get_stats64 for 5700 / 5701 devsMatt Carlson1-22/+23
tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700 and bcm5701 devices. However, functions that call tg3_halt() have already acquired tp->lock. When tg3_get_stats64() is called in tg3_halt(), deadlock will occur. This patch fixes the problem by separating the stat gathering code into a new tg3_get_nstats() function. tg3_get_stats64() is recoded to call this function and take tp->lock. The code that takes tp->lock in tg3_calc_crc_errors() has been removed. Function signatures have been cleaned up too. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+6
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23ethernet: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka2-2/+2
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Create timer helper functionsMatt Carlson1-96/+112
This patch seeks to clean up the timer related code. It begins by moving one-time timer setup code from tg3_open() to tg3_init_one(). It then creates a function that encapsulates the code needed to start the timer. A tg3_timer_stop() function was added for parity. Finally, this patch moves all the timer functions to a more suitable location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Clear RECOVERY_PENDING with reset_task_cancelMatt Carlson1-1/+1
If an error happens in the tx completion thread, tg3_reset_task will be scheduled and TX_RECOVERY_PENDING will be set. The TX_RECOVERY_PENDING flag causes tg3_poll[_msix] to return early before doing much of its work. Tg3_reset_task() gets canceled when the configuration of the device is changing, which always results in a chip reset. When this happens, the TX_RECOVERY_PENDING flag may be left set, which would unnecessarily hinder tg3_poll from doing work. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Remove SPEED_UNKNOWN checksMatt Carlson1-44/+23
tg3_phy_copper_begin() has code that configures the link advertisements through the use of the link_config.speed and link_config.duplex members. The driver does not internally use these members in this way, nor is it (currently) permitted via the ethtool interface. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Fix link check in tg3_adjust_linkMatt Carlson2-2/+5
The tg3 driver tried to detect link changes by comparing the tg3 local active_speed member with SPEED_UNKNOWN (or formerly SPEED_INVALID). This check is not correct, since phylib will never set its speed member to either of these two values. The code only appeared to work because tg3 initializes active_speed to SPEED_INVALID during tg3_init_one. This patch introduces a new "old_link" tg3 member and then compares the phy_device's link member against it to detect link state changes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22ethernet/broadcom: ip6_route_output() never returns NULL.RongQing.Li1-1/+5
ip6_route_output() never returns NULL, so it is wrong to check if the return value is NULL. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22tg3: remove IRQF_SAMPLE_RANDOM flagDavidlohr Bueso1-1/+1
This driver is the last user of the IRQF_SAMPLE_RANDOM flag for net drivers, and since add_*_randomness interfaces have now deprecated the flag as a source of external noise, we can remove it. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20bnx2x: update driver version to 1.72.10-0Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20bnx2x: add gro_checkDmitry Kravkov4-0/+25
The patch provides workaround for BUG in FW 7.2.16, which in GRO mode may miscalculate buffer and place on SGE one frag less than it could. It may happen only for some MTUs, we mark these MTUs with gro_check flag during device initialization or MTU change. Next FW should include fix for the issue and the patch could be reverted. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20cnic: update for FW 7.2.xxMichael Chan1-12/+12
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20use FW 7.2.16Dmitry Kravkov8-82/+177
The patch integrates FW 7.2.16 HSI and implements driver part of GRO flow. FW 7.2.16 adds the ability to aggregate packets for GRO (and not just LRO) and also fixes some bugs. 1. Added new aggregation mode: GRO. In this mode packets are aggregated such that the original packets can be reconstructed by the OS. 2. 57712 HW bug workaround - initialized all CAM TM registers to 0x32. 3. Adding the FCoE statistics structures to the BNX2X HSI. 4. Wrong configuration of TX HW input buffer size may cause theoretical performance effect. Performed configuration fix. 5. FCOE - Arrival of packets beyond task IO size can lead to crash. Fix firmware data-in flow. 6. iSCSI - In rare cases of on-chip termination the graceful termination timer hangs, and the termination doesn't complete. Firmware fix to MSL timer tolerance. 7. iSCSI - Chip hangs when target sends FIN out-of-order or with isles open at the initiator side. Firmware implementation corrected to drop FIN received out-of-order or with isles still open. 8. iSCSI - Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. Firmware implementation corrected to support arbitrary aligned retransmissions. 9. iSCSI - Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to crash. Firmware fix to relevant flow. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19bnx2x: make bnx2x_close() static againMichal Schmidt2-3/+3
Commit 8304859a "bnx2x: add fan failure event handling" made the function bnx2x_close() non-static unnecessarily. The function is not called from other sources. Make it static again. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19b44: remove __exit from b44_pci_exit()Nikola Pajkovsky1-1/+1
WARNING: drivers/net/ethernet/broadcom/built-in.o(.init.text+0x5d): Section mismatch in reference from the function b44_init() to the function .exit.text:b44_pci_exit() module exits with b44_cleanup() Signed-off-by: Nikola Pajkovsky <n.pajkovsky@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-21/+6
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c Small minor conflict in bnx2x, wherein one commit changed how statistics were stored in software, and another commit fixed endianness bugs wrt. reading the values provided by the chip in memory. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-10 09:08:23 +0000