summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2017-07-11bnxt_en: Fix SRIOV on big-endian architecture.Michael Chan1-5/+10
The PF driver sets up a list of firmware commands from the VF driver that needs to be forwarded to the PF for approval. This list is a 256-bit bitmap. The code that sets up the bitmap falls apart on big-endian architecture. __set_bit() does not work because it operates on long types whereas the firmware interface is defined in u32 types, causing bits in the wrong 32-bit word to be set. Fix it by setting the proper bits on an array of u32. Fixes: de68f5de5651 ("bnxt_en: Fix bitmap declaration to work on 32-bit arches.") Reported-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix bug in ethtool -L.Michael Chan4-9/+8
When changing channels from combined to rx/tx or vice versa, the code uses the wrong "sh" parameter to determine if we are reserving rings for shared or non-shared mode. It should be using the ethtool requested "sh" parameter instead of the current "sh" parameter. Fix it by passing the "sh" parameter to bnxt_reserve_rings(). For ethtool, we will pass in the requested "sh" parameter. Fixes: 391be5c27364 ("bnxt_en: Implement new scheme to reserve tx rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix race conditions in .ndo_get_stats64().Michael Chan2-2/+17
.ndo_get_stats64() may not be protected by RTNL and can race with .ndo_stop() or other ethtool operations that can free the statistics memory. Fix it by setting a new flag BNXT_STATE_READ_STATS and then proceeding to read statistics memory only if the state is OPEN. The close path that frees the memory clears the OPEN state and then waits for the BNXT_STATE_READ_STATS to clear before proceeding to free the statistics memory. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-11/+58
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25bnx2x: Don't log mc removal needlesslyMintz, Yuval1-1/+1
When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: bcmgenet: Remove special handling of "internal" phy-modeFlorian Fainelli1-16/+8
The PHY library now supports an "internal" phy-mode, thus making our custom parsing code now unnecessary. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23bnxt_en: Fix netpoll handling.Michael Chan1-6/+48
To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23bnxt_en: Add missing logic to handle TPA end error conditions.Michael Chan2-4/+9
When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16bpf: bnxt: Report bpf_prog ID during XDP_QUERY_PROGMartin KaFai Lau1-0/+1
Add support to bnxt to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by: Alexei Starovoitov <ast@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg1-1/+1
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-6/+29
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13networking: use skb_put_zero()Johannes Berg1-2/+1
Use the recently introduced helper to replace the pattern of skb_put() && memset(), this transformation was done with the following spatch: @@ identifier p; expression len; expression skb; @@ -p = skb_put(skb, len); -memset(p, 0, len); +p = skb_put_zero(skb, len); Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com4-4/+13
Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10bnx2x: Don't post statistics to malicious VFsMintz, Yuval2-1/+13
Once firmware indicates that a given VF is malicious and until that VF passes an FLR all bets are off - PF can't know anything is happening to the VF [since VF can't communicate anything to its PF]. But PF is currently still periodically asking device to collect statistics for the VF which might in turn fill logs by IOMMU blocking memory access done by the VF's PCI function [in the case VF has unmapped its buffers]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10bnx2x: Allow vfs to disable txvlan offloadMintz, Yuval1-4/+15
VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko3-6/+6
We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07bnx2x: fix pf2vf bulletin DMA mapping leakMichal Schmidt1-1/+1
When freeing VF's DMA mappings, an already NULLed pointer was checked again due to an apparent copy&paste error. Consequently, the pf2vf bulletin DMA mapping was not freed. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+6
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02net: systemport: Fix missing Wake-on-LAN interrupt for SYSTEMPORT LiteFlorian Fainelli1-2/+5
On SYSTEMPORT Lite, since we have the main interrupt source in the first cell, the second cell is the Wake-on-LAN interrupt, yet the code was not properly updated to fetch the second cell, and instead looked at the third and non-existing cell for Wake-on-LAN. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01bnx2x: Fix Multi-CosMintz, Yuval1-1/+1
Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e6d27 ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Fix xmit_more with BQL.Michael Chan1-1/+1
We need to write the doorbell if BQL has stopped the queue and skb->xmit_more is set. Otherwise it is possible for the tx queue to rot and cause tx timeout. Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.") Suggested-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Pass in sh parameter to bnxt_set_dflt_rings().Michael Chan1-3/+2
In the existing code, the local variable sh is hardcoded to true to calculate default rings for shared ring configuration. It is better to have the caller determine the value of sh. Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Implement xmit_more.Michael Chan1-1/+5
Do not write the TX doorbell if skb->xmit_more is set unless the TX queue is full. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Optimize doorbell write operations for newer chips.Michael Chan4-21/+23
Older chips require the doorbells to be written twice, but newer chips do not. Add a new common function bnxt_db_write() to write all doorbells appropriately depending on the chip. Eliminating the extra doorbell on newer chips has a significant performance improvement on pktgen. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add additional chip ID definitions.Michael Chan2-8/+27
Add additional chip definitions and macros for all supported chips. Add a new macro BNXT_CHIP_P4_PLUS for the newer generation of chips and use the macro to properly determine the features supported by these newer chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.Michael Chan3-0/+22
When bnxt_en gets a PCI shutdown call, we need to have a new callback to inform the RDMA driver to do proper shutdown and removal. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add PCI IDs for BCM57454 VF devices.Deepak Khungar1-0/+2
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Support for Short Firmware MessageDeepak Khungar2-1/+69
The new short message format is used on the new BCM57454 VFs. Each firmware message is a fixed 16-byte message sent using the standard firmware communication channel. The short message has a DMA address pointing to the legacy long firmware message. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar1-0/+1
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+5
2017-05-17bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST.Michael Chan1-2/+4
Otherwise, all the host based DCBX settings from lldpad will fail if the firmware DCBX agent is running. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration.Michael Chan1-2/+1
In the current code, bnxt_dcb_init() is called too early before we determine if the firmware DCBX agent is running or not. As a result, we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED flags properly to report to DCBNL. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16bnx2x: Remove open coded carrier checkLeon Romanovsky1-1/+1
There is inline function to test if carrier present, so it makes open-coded solution redundant. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16bnxt: add dma mapping attributesShannon Nelson1-22/+34
On the SPARC platform we need to use the DMA_ATTR_WEAK_ORDERING attribute in our Rx path dma mapping in order to get the expected performance out of the receive path. Adding it to the Tx path has little effect, so that's not a part of this patch. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: Tom Saeger <tom.saeger@oracle.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+1
Pull MIPS updates from James Hogan: "math-emu: - Add missing clearing of BLTZALL and BGEZALL emulation counters - Fix BC1EQZ and BC1NEZ condition handling - Fix BLEZL and BGTZL identification BPF: - Add JIT support for SKF_AD_HATYPE - Use unsigned access for unsigned SKB fields - Quit clobbering callee saved registers in JIT code - Fix multiple problems in JIT skb access helpers Loongson 3: - Select MIPS_L1_CACHE_SHIFT_6 Octeon: - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL - Remove unused L2C types and macros. - Remove unused SLI types and macros. - Fix compile error when USB is not enabled. - Octeon: Remove unused PCIERCX types and macros. - Octeon: Clean up platform code. SNI: - Remove recursive include of cpu-feature-overrides.h Sibyte: - Export symbol periph_rev to sb1250-mac network driver. - Fix Kconfig warning. Generic platform: - Enable Root FS on NFS in generic_defconfig SMP-MT: - Use CPU interrupt controller IPI IRQ domain support UASM: - Add support for LHU for uasm. - Remove needless ISA abstraction mm: - Add 48-bit VA space and 4-level page tables for 4K pages. PCI: - Add controllers before the specified head irqchip driver for MIPS CPU: - Replace magic 0x100 with IE_SW0 - Prepare for non-legacy IRQ domains - Introduce IPI IRQ domain support MAINTAINERS: - Update email-id of Rahul Bedarkar NET: - sb1250-mac: Add missing MODULE_LICENSE() CPUFREQ: - Loongson2: drop set_cpus_allowed_ptr() Misc: - Disable Werror when W= is set - Opt into HAVE_COPY_THREAD_TLS - Enable GENERIC_CPU_AUTOPROBE - Use common outgoing-CPU-notification code - Remove dead define of ST_OFF - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} - Stengthen IPI IRQ domain sanity check - Remove confusing else statement in __do_page_fault() - Don't unnecessarily include kmalloc.h into <asm/cache.h>. - Delete unused definition of SMP_CACHE_SHIFT. - Delete redundant definition of SMP_CACHE_BYTES" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits) MIPS: Sibyte: Fix Kconfig warning. MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver. NET: sb1250-mac: Add missing MODULE_LICENSE() MAINTAINERS: Update email-id of Rahul Bedarkar MIPS: Remove confusing else statement in __do_page_fault() MIPS: Stengthen IPI IRQ domain sanity check MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support irqchip: mips-cpu: Introduce IPI IRQ domain support irqchip: mips-cpu: Prepare for non-legacy IRQ domains irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} MIPS: generic: Enable Root FS on NFS in generic_defconfig MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h MIPS: Opt into HAVE_COPY_THREAD_TLS CPUFREQ: Loongson2: drop set_cpus_allowed_ptr() MIPS: uasm: Remove needless ISA abstraction MIPS: Remove dead define of ST_OFF MIPS: Use common outgoing-CPU-notification code MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters ...
2017-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+2
Pull networking fixes from David Miller: 1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko. 2) cdc_ncm doesn't actually fully zero out the padding area is allocates on TX, from Jim Baxter. 3) Don't leak map addresses in BPF verifier, from Daniel Borkmann. 4) If we randomize TCP timestamps, we have to do it everywhere including SYN cookies. From Eric Dumazet. 5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous. 6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from Dan Carpenter. 7) Add missing memory allocation return value check to DSA loop driver, from Christophe Jaillet. 8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy Kalluru. 9) Don't inherit MC list from parent inet connection sockets, another syzkaller spotted gem. Fix from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) dccp/tcp: do not inherit mc_list from parent qede: Split PF/VF ndos. qed: Correct doorbell configuration for !4Kb pages qed: Tell QM the number of tasks qed: Fix VF removal sequence qede: Fix XDP memory leak on unload net/mlx4_core: Reduce harmless SRIOV error message to debug level net/mlx4_en: Avoid adding steering rules with invalid ring net/mlx4_en: Change the error print to debug print drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison DECnet: Use container_of() for embedded struct Revert "ipv4: restore rt->fi for reference counting" net: mdio-mux: bcm-iproc: call mdiobus_free() in error path net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf net: cdc_ncm: Fix TX zero padding stmmac: pci: split out common_default_data() helper stmmac: pci: RX queue routing configuration stmmac: pci: TX and RX queue priority configuration stmmac: pci: set default number of rx and tx queues ...
2017-05-08treewide: spelling: correct diffrent[iate] and banlance typosJoe Perches1-1/+1
Add these misspellings to scripts/spelling.txt too Link: http://lkml.kernel.org/r/962aace119675e5fe87be2a88ddac1a5486f8e60.1490931810.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08bnxt_en: allocate enough space for ->ntp_fltr_bmapDan Carpenter1-1/+2
We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03tg3: don't clear stats while tg3_closeYueHaibing1-4/+0
Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse its salves to get statistics,cumulative the increment.If a tg3 NIC is added to bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value (ex.1638.3 PiB) because of negative increment. Fixes: 92feeabf3f67 ("tg3: Save stats across chip resets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30bnx2x: Align RX buffersScott Wood1-0/+1
The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30bnx2x: Get rid of useless temporary variableAndy Shevchenko1-9/+5
Replace pattern int status; ... status = func(...); return status; by return func(...); No functional change intented. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30bnx2x: Reuse bnx2x_null_format_ver()Andy Shevchenko1-11/+9
Reuse bnx2x_null_format_ver() in functions where it's appropriated instead of open coded variant. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30bnx2x: Replace custom scnprintf()Andy Shevchenko1-70/+9
Use scnprintf() when printing version instead of custom open coded variants. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Restrict a PF in Multi-Host mode from changing port PHY configurationDeepak Khungar2-5/+12
This change restricts the PF in multi-host mode from setting any port level PHY configuration. The settings are controlled by firmware in Multi-Host mode. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Check the FW_LLDP_AGENT flag before allowing DCBX host agent.Michael Chan1-1/+2
Check the additional flag in bnxt_hwrm_func_qcfg() before allowing DCBX to be done in host mode. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Add 100G link speed reporting for BCM57454 ASIC in ethtoolDeepak Khungar3-3/+18
Added support for 100G link speed reporting for Broadcom BCM57454 ASIC in ethtool command. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Fix VF attributes reporting.Michael Chan1-3/+5
The .ndo_get_vf_config() is returning the wrong qos attribute. Fix the code that checks and reports the qos and spoofchk attributes. The BNXT_VF_QOS and BNXT_VF_LINK_UP flags should not be set by default during init. time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Pass DCB RoCE app priority to firmware.Michael Chan2-1/+108
When the driver gets the RoCE app priority set/delete call through DCBNL, the driver will send the information to the firmware to set up the priority VLAN tag for RDMA traffic. [ New version using the common ETH_P_IBOE constant in if_ether.h ] Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21NET: sb1250-mac: Add missing MODULE_LICENSE()Ralf Baechle1-0/+1
As per comment, the code has always been GPLv2 licensed. This fixes the follwoing modpost warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/broadcom/sb1250-mac.o Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-18/+36
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-05 07:20:37 +0000