summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/atheros/alx
AgeCommit message (Collapse)AuthorFilesLines
2016-11-14net: alx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-24/+35
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/atheros: use core min/max MTU checkingJarod Wilson2-8/+3
atl2: min_mtu 40, max_mtu 1504 - Remove a few redundant defines that already have equivalents in if_ether.h. atl1: min_mtu 42, max_mtu 10218 atl1e: min_mtu 42, max_mtu 8170 atl1c: min_mtu 42, max_mtu 6122/1500 - GbE hardware gets a max_mtu of 6122, slower hardware gets 1500. alx: min_mtu 34, max_mtu 9256 - Not so sure that minimum MTU number is really what was intended, but that's what the math actually makes it out to be, due to max_frame manipulations and comparison in alx_change_mtu, rather than just comparing new_mtu. (I think 68 was the intended min_mtu value). CC: netdev@vger.kernel.org CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-15alx: fix error handling in __alx_openTobias Regnery1-1/+3
In commit 9ee7b683ea63 we moved the enablement of msi interrupts earlier in alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns with an error but msi (or msi-x) interrupts stays enabled. Add a new error label to disable msi (or msi-x) interrupts. Fixes: 9ee7b683ea63 ("alx: refactor msi enablement and disablement") Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: add module parameter to enable msi-x supportTobias Regnery1-1/+4
msi-x support is default disabled in the alx driver. In order to test msi-x interrupts for regressions add a module parameter to the driver. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: add msi-x supportTobias Regnery4-8/+184
Add msi-x support to the alx driver. This is in preparation for multi queue support. msi-x interrupts are disabled by default because without multi queue support there is no advantage over msi interrupts. The performance numbers observed with iperf stay the same. Based on information of the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: factor out part of the interrupt handlerTobias Regnery1-14/+20
Factor out the handling of misc interrupts into a new function. This function can be reused later for msi-x interrupts. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: refactor msi enablement and disablementTobias Regnery2-9/+26
Introduce a new flag field for the advanced interrupt capatibilities and add new functions to enable and disable msi interrupts. These functions will be extended later to cover msi-x interrupts. We enable msi interrupts earlier in alx_init_intr because with msi-x and multi queue support the number of queues must be set before we allocate resources for the rx and tx paths. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+3
All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-29Add Killer E2500 device ID in alx driver.Owen Lin2-0/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26alx: add tso supportTobias Regnery1-4/+71
Add tso/tso6 support to the alx driver. Based on information from the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas2-51/+14
Conflicts: drivers/nvme/host/pci.c
2016-06-23alx: Use pci_(request|release)_mem_regionsJohannes Thumshirn1-7/+5
Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the ethernet drivers. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: David S. Miller <davem@davemloft.net>
2016-06-14net: alx: Work around the DMA RX overflow issueFeng Tang2-51/+14
Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow issue. But from debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. So one idea is instead of adding a new allocator, why not just hitting the right target by avaiding the error-prone DMA address? This patch will actually * Remove the commit 26c5f03 * Apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. In theory this method should also apply to atl1c driver, which I can't find anyone who can help to test on real devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Eric Dumazet <edumazet@google.com> Tested-by: Ole Lukoie <olelukoie@mail.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-25net: alx: use custom skb allocatorFeng Tang2-1/+51
This patch follows Eric Dumazet's commit 7b70176421 for Atheros atl1c driver to fix one exactly same bug in alx driver, that the network link will be lost in 1-5 minutes after the device is up. My laptop Lenovo Y580 with Atheros AR8161 ethernet device hit the same problem with kernel 4.4, and it will be cured by Jarod Wilson's commit c406700c for alx driver which get merged in 4.5. But there are still some alx devices can't function well even with Jarod's patch, while this patch could make them work fine. More details on https://bugzilla.kernel.org/show_bug.cgi?id=70761 The debug shows the issue is very likely to be related with the RX DMA address, specifically 0x...f80, if RX buffer get 0x...f80 several times, their will be RX overflow error and device will stop working. For kernel 4.5.0 with Jarod's patch which works fine with my AR8161/Lennov Y580, if I made some change to the __netdev_alloc_skb --> __alloc_page_frag() to make the allocated buffer can get an address with 0x...f80, then the same error happens. If I make it to 0x...f40 or 0x....fc0, everything will be still fine. So I tend to believe that the 0x..f80 address cause the silicon to behave abnormally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Cc: Eric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Tested-by: Ole Lukoie <olelukoie@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-1/+1
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ethernet/atheros/alx: sanitize buffer sizing and paddingJarod Wilson3-12/+14
This is based on the work done by Przemek Rudy in bug 70761 at bugzilla.kernel.org, but with some work done to disentagle and clarify things a bit. Similar to Przemek's work and other drivers, we're adding a padding of 16 here, but we're also disentangling mtu size calculations from max buffer size calculations a bit, and adding ETH_HLEN to the value written into ALX_MTU. Hopefully, with a bit more consistency and clarity, things behave better here. Sadly, I can only test in my alx-driven E2200, which worked just fine before this patch. In comment #58 of bug 70761, Eugene A. Shatokhin reports that this patch does help considerably for a ROSA Linux user of his with an AR8162 network adapter when patched into a 4.1.x-based kernel, with several days of normal operation where wired network previously wasn't usable without setting MTU to 9000 as a work-around. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 CC: "Eugene A. Shatokhin" <eugene.shatokhin@rosalab.ru> CC: Przemek Rudy <prudy1@o2.pl> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+3
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03alx: remove pointless assignmentJarod Wilson1-1/+0
Reasonably sure this doesn't serve any purpose. CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18ethernet/atheros/alx: add Killer E2400 device IDBen Pope2-0/+3
This patch adds the PCI device ID (0xe0a1) and alx_pci_tbl entry for the Killer E2400 Ethernet controller, modeled after the Killer E2200 controller support (0xe091) already present in the alx driver. This patch was originally authored by Ben Pope, but it got held up by issues in the commit message, so I'm resubmitting it on his behalf. I've extensively used a kernel with this patch on a System76 serw9 laptop and am quite confident it works well (at least on the hardware I have available for testing). Note that as a favor to System76, Ubuntu has been carrying this as a sauce patch in their 4.2 based Wily kernel, which presumably has given it real-world testing on other E2400 equipped hardware (I don't know of any Ubuntu kernel bugs filed about it): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1498633 Signed-off-by: Jason Gerard DeRose <jason@system76.com> Signed-off-by: Ben Pope <benpope81@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-11alx: fix alx_poll()Eric Dumazet1-11/+13
Commit d75b1ade567f ("net: less interrupt masking in NAPI") uncovered wrong alx_poll() behavior. A NAPI poll() handler is supposed to return exactly the budget when/if napi_complete() has not been called. It is also supposed to return number of frames that were received, so that netdev_budget can have a meaning. Also, in case of TX pressure, we still have to dequeue received packets : alx_clean_rx_irq() has to be called even if alx_clean_tx_irq(alx) returns false, otherwise device is half duplex. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Reported-by: Oded Gabbay <oded.gabbay@amd.com> Bisected-by: Oded Gabbay <oded.gabbay@amd.com> Tested-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26alx: Remove casts of pointer to same typeJoe Perches1-1/+1
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+4
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24alx: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in alx_start_xmit that can be called in hard irq and other contexts. dev_kfree_skb_any is used as alx_start_xmit only frees skbs when dropping them. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-17ATHEROS-ALX: Use dma_set_mask_and_coherent and fix a bugPeter Senna Tschudin1-10/+4
1. For the 64 bits dma mask use dma_set_mask_and_coherent instead of dma_set_mask and dma_set_coherent_mask. 2. For the 32 bits dma mask dma_set_coherent_mask is only called if dma_set_mask fails, which is unusual. Assuming this as a bug, fixes it by replacing calls to dma_set_mask and dma_set_coherent_mask by a call to dma_set_mask_and_coherent. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10alx: add missing stats_lock spinlock initJohn Greene1-0/+1
Trivial fix for init time stack trace occuring in alx_get_stats64 upon start up. Should have been part of commit adding the spinlock: f1b6b106 alx: add alx_get_stats64 operation Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-11alx: add stats to ethtoolSabrina Dubroca2-1/+107
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-11alx: add alx_get_stats64 operationSabrina Dubroca2-0/+53
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-11alx: add stats update functionSabrina Dubroca2-0/+62
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-11alx: add constants for the stats fieldsSabrina Dubroca1-4/+48
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-11alx: add a hardware stats structureSabrina Dubroca1-0/+62
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14alx: Reset phy speed after resumehahnjo1-0/+3
This fixes bug 62491 (https://bugzilla.kernel.org/show_bug.cgi?id=62491). After resuming some users got the following error flooding the kernel log: alx 0000:02:00.0: invalid PHY speed/duplex: 0xffff Signed-off-by: Jonas Hahnfeld <linux@hahnjo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18net: alx: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13alx: remove redundant D0 power state setYijing Wang1-7/+2
Pci_enable_device_mem() will set device power state to D0, so it's no need to do it again in alx_probe(). Also remove redundant PM Cap find code, because pci core has been saved the pci device pm cap value. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11alx: fix lockdep annotationMaarten Lankhorst1-3/+2
Move spin_lock_init to be called before the spinlocks are used, preventing a lockdep splat. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03alx: remove WoL supportJohannes Berg4-323/+15
Unfortunately, WoL is broken and the system will immediately resume after suspending, and I can't seem to figure out why. Remove WoL support until the issue can be found. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix ethtool support codeJohannes Berg1-35/+29
A number of places treated features wrongly, listing not-supported features instead of supported ones. Also, the get_drvinfo ethtool callback isn't needed, and alx_get_pauseparam can be simplified. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix MAC address alignment problemJohannes Berg1-4/+4
In two places, parts of MAC addresses are used as u32/u16 values. This can cause alignment problems, use put_unaligned and get_unaligned to fix this. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: separate link speed/duplex fieldsJohannes Berg4-125/+106
As suggested by Ben Hutchings, use separate fields to track current link speed and duplex setting. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: make sizes unsignedJohannes Berg1-4/+4
The ring sizes should be unsigned, pointed out by Ben Hutchings. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix 100mbit/half duplex speed translationJohannes Berg1-1/+1
100mbit half duplex is ADVERTISED_100baseT_Half, not ADVERTISED_10baseT_Half. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: treat flow control correctly in alx_set_pauseparam()Johannes Berg1-1/+2
Even when alx_setup_speed_duplex() is called, we still need to call alx_cfg_mac_flowcontrol() and set hw->flowctrl if flow control changed. This was a bug I accidentally introduced while simplifying the original driver. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17alx: add a simple AR816x/AR817x device driverJohannes Berg7-0/+4549
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 21:23:49 +0000