summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/mv88e6060.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli1-1/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: introduce dsa_user_ports helperVivien Didelot1-3/+2
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: add dsa_to_port helperVivien Didelot1-1/+1
The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6060: setup random mac addressVivien Didelot1-17/+26
As for mv88e6xxx, setup the switch from within the mv88e6060 driver with a random MAC address, and remove the .set_addr implementation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6060: fix switch MAC addressVivien Didelot1-2/+8
The 88E6060 Ethernet switch always transmits the multicast bit of the switch MAC address as a zero. It re-uses the corresponding bit 8 of the register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr". If the "DiffAddr" bit is 0, then all ports transmit the same source address. If it is set to 1, then bit 2:0 are used for the port number. The mv88e6060 driver is currently wrongly shifting the MAC address byte 0 by 9. To fix this, shift it by 8 as usual and clear its bit 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: dsa: use dedicated CPU portVivien Didelot1-1/+1
Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-1/+1
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Make dsa_switch_ops constFlorian Fainelli1-1/+1
Now that we have properly encapsulated and made drivers utilize exported functions, we can switch dsa_switch_ops to be a annotated with const. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Encapsulate legacy switch drivers into dsa_switch_driverFlorian Fainelli1-2/+6
In preparation for making struct dsa_switch_ops const, encapsulate it within a dsa_switch_driver which has a list pointer and a pointer to dsa_switch_ops. This allows us to take the list_head pointer out of dsa_switch_ops, which is written to by {un,}register_switch_driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: dsa: remove ds_to_privVivien Didelot1-2/+2
Access the priv member of the dsa_switch structure directly, instead of having an unnecessary helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-24net: dsa: rename switch operations structureVivien Didelot1-3/+3
Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: dsa: Allow the DSA driver to indicate the tag protocolAndrew Lunn1-1/+6
DSA drivers may drive different families of switches which need different tag protocol. Rather than hard code the tag protocol in the driver structure, have a callback for the DSA core to call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: constify probed nameVivien Didelot1-5/+5
Change the dsa_switch_driver.probe function to return a const char *. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13dsa: Rename phys_port_mask to enabled_port_maskAndrew Lunn1-1/+1
The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Rename DSA probe function.Andrew Lunn1-3/+4
Rename the function called from the DSA to perform a probe for the switch. This makes the normal _probe() name available for a standard Linux device driver probe function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Keep the mii bus and address in the private structureAndrew Lunn1-18/+26
Rather than looking up the mii bus and address every time, do it once at probe, and keep it in the private structure. Centralise this probe code in mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Have the switch driver allocate there own private memoryAndrew Lunn1-1/+2
Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Pass the dsa device to the switch driversAndrew Lunn1-1/+2
By passing a device structure to the switch devices, it allows them to use devm_* methods for resource management. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net: dsa: mv88e6060: replace magic values with register definesNeil Armstrong1-27/+37
To align with the mv88e6xxx code, use the register defines to access all the register addresses and bit fields. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net: dsa: mv88e6060: use the correct bit shift for mac0Neil Armstrong1-1/+2
According to the mv88e6060 datasheet, the first mac byte must be at position 9 instead of 8 since the bit 8 is used to select if the mac address must differ for each port for Pause frames. Use the correct shift and set the same mac address for all port. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net: dsa: mv88e6060: use the correct MaxFrameSize bitNeil Armstrong1-1/+1
According to the mv88e6060 datasheet, the MaxFrameSize bit position is 10 instead of 11 which is reserved. Use the bit correctly to setup max frame size to 1536. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net: dsa: mv88e6060: use the correct InitReady bitNeil Armstrong1-1/+1
According to the mv88e6060 datasheet, the InitReady bit position is 11 and the polarity is inverted. Use the bit correctly to detect the end of initialization. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15net: dsa: mv88e6060: remove poll_link callbackNeil Armstrong1-49/+0
As of mv88e6xxx remove the poll_link callback since the link state change polling is now handled by the phylib. Tested on a mv88e6060 B0 device with a TI DM816X SoC. Suggested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23net: dsa: Make mv88e6060 use nested mdiobus read/writeNeil Armstrong1-2/+2
Like mv88e6xxx and mdio-mux, to avoid lockdep give false positives because of nested MDIO busses, switch to previously introduced nested mdiobus_read/write variants. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Report known silicon revisions for Marvell 88E6060Guenter Roeck1-1/+4
Report known silicon revisions when probing Marvell 88E6060 switches. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17dsa: Fix conversion from host device to mii busGuenter Roeck1-4/+12
Commit b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") replaces mii_bus with a generic host_dev, and introduces dsa_host_dev_to_mii_bus() to support conversion from host_dev to mii_bus. However, in some cases it uses to_mii_bus to perform that conversion. Since host_dev is not the phy bus device but typically a platform device, this fails and results in a crash with the affected drivers. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81781d35>] __mutex_lock_slowpath+0x75/0x100 PGD 406783067 PUD 406784067 PMD 0 Oops: 0002 [#1] SMP ... Call Trace: [<ffffffff810a538b>] ? pick_next_task_fair+0x61b/0x880 [<ffffffff81781de3>] mutex_lock+0x23/0x37 [<ffffffff81533244>] mdiobus_read+0x34/0x60 [<ffffffff8153b95a>] __mv88e6xxx_reg_read+0x8a/0xa0 [<ffffffff8153b9bc>] mv88e6xxx_reg_read+0x4c/0xa0 Fixes: b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Replace mii_bus with a generic host deviceAlexander Duyck1-4/+9
This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: dsa: change tag_protocol to an enumFlorian Fainelli1-1/+1
Now that we introduced an additional multiplexing/demultiplexing layer with commit 3e8a72d1dae37 ("net: dsa: reduce number of protocol hooks") that lives within the DSA code, we no longer need to have a given switch driver tag_protocol be an actual ethertype value, instead, we can replace it with an enum: dsa_tag_protocol. Do this replacement in the drivers, which allows us to get rid of the cpu_to_be16()/htons() dance, and remove ETH_P_BRCMTAG since we do not need it anymore. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert printk calls to netdev_info callsBarry Grussling1-5/+6
Convert DSA printk calls to netdev_info calls as recommended by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert repeated msleep calls to timeoutsBarry Grussling1-4/+8
Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert DSA comments to network-style commentsBarry Grussling1-22/+9
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24drivers/net: dsa/mv88e6xxx.c files need linux/module.hPaul Gortmaker1-0/+1
An implicit instance of module.h leaked back into existence and was masking the fact that these drivers weren't calling out the include for itself. Fix the drivers before we remove the implicit include path via net/netprio_cgroup.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings1-0/+293
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 00:51:55 +0000