summaryrefslogtreecommitdiffstats
path: root/drivers/net/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-24net: devlink: select NET_DEVLINK from driversJiri Pirko1-0/+1
Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18gtp: change NET_UDP_TUNNEL dependency to selectMatteo Croce1-2/+2
Similarly to commit a7603ac1fc8c ("geneve: change NET_UDP_TUNNEL dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which makes impossible to compile it if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26net: devlink: turn devlink into a built-inJakub Kicinski1-1/+0
Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: ipvlan_l3s: fix kconfig dependency warningRandy Dunlap1-0/+1
Fix the kconfig warning in IPVLAN_L3S when neither INET nor IPV6 is enabled: WARNING: unmet direct dependencies detected for NET_L3_MASTER_DEV Depends on [n]: NET [=y] && (INET [=n] || IPV6 [=n]) Selected by [y]: - IPVLAN_L3S [=y] && NETDEVICES [=y] && NET_CORE [=y] && NETFILTER [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12geneve: change NET_UDP_TUNNEL dependency to selectMatteo Croce1-2/+2
Due to the depends on NET_UDP_TUNNEL, at the moment it is impossible to compile GENEVE if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08ipvlan: decouple l3s mode dependencies from other modesDaniel Borkmann1-2/+4
Right now ipvlan has a hard dependency on CONFIG_NETFILTER and otherwise it cannot be built. However, the only ipvlan operation mode that actually depends on netfilter is l3s, everything else is independent of it. Break this hard dependency such that users are able to use ipvlan l3 mode on systems where netfilter is not compiled in. Therefore, this adds a hidden CONFIG_IPVLAN_L3S bool which is defaulting to y when CONFIG_NETFILTER is set in order to retain existing behavior for l3s. All l3s related code is refactored into ipvlan_l3s.c that is compiled in when enabled. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: Fix typo in NET_FAILOVER help textJonathan Neuschäfer1-1/+1
"also enables" should not be spelled as one word. Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-05net: documentation: build a directory structure for driversJakub Kicinski1-4/+4
Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Henrik Austad <henrik@austad.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28virtio_net: Extend virtio to use VF datapath when availableSridhar Samudrala1-0/+1
This patch enables virtio_net to switch over to a VF datapath when STANDBY feature is enabled and a VF netdev is present with the same MAC address. It allows live migration of a VM with a direct attached VF without the need to setup a bond/team between a VF and virtio net device in the guest. It uses the API that is exported by the net_failover driver to create and and destroy a master failover netdev. When STANDBY feature is enabled, an additional netdev(failover netdev) is created that acts as a master device and tracks the state of the 2 lower netdevs. The original virtio_net netdev is marked as 'standby' netdev and a passthru device with the same MAC is registered as 'primary' netdev. The hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: Introduce net_failover driverSridhar Samudrala1-0/+12
The net_failover driver provides an automated failover mechanism via APIs to create and destroy a failover master netdev and manages a primary and standby slave netdevs that get registered via the generic failover infrastructure. The failover netdev acts a master device and controls 2 slave devices. The original paravirtual interface gets registered as 'standby' slave netdev and a passthru/vf device with the same MAC gets registered as 'primary' slave netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. This can be used by paravirtual drivers to enable an alternate low latency datapath. It also enables hypervisor controlled live migration of a VM with direct attached VF by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27geneve: fix build with modular IPV6Tobias Regnery1-0/+1
Commit c40e89fd358e ("geneve: configure MTU based on a lower device") added an IS_ENABLED(CONFIG_IPV6) to geneve, leading to the following link error with CONFIG_GENEVE=y and CONFIG_IPV6=m: drivers/net/geneve.o: In function `geneve_link_config': geneve.c:(.text+0x14c): undefined reference to `rt6_lookup' Fix this by adding a Kconfig dependency and forcing GENEVE to be a module when IPV6 is a module. Fixes: c40e89fd358e ("geneve: configure MTU based on a lower device") Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29netdevsim: Add simple FIB resource controller via devlinkDavid Ahern1-0/+1
Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27ipvlan: fix building with modular IPV6Arnd Bergmann1-0/+1
We no longer depend on IPV6, but that now causes a link error with CONFIG_IPV6=m and CONFIG_IPVLAN=y: drivers/net/ipvlan/ipvlan_core.o: In function `ipvlan_queue_xmit': ipvlan_core.c:(.text+0x1440): undefined reference to `ip6_route_output_flags' drivers/net/ipvlan/ipvlan_core.o: In function `ipvlan_l3_rcv': ipvlan_core.c:(.text+0x1818): undefined reference to `ip6_route_input_lookup' This adds back the dependency on IPV6, with the option of building without IPV6, but forcing IPVLAN to be a module when IPV6 is a module. Fixes: 94333fac44d1 ("ipvlan: drop ipv6 dependency") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21ipvlan: selects master_l3 device instead of depending on itMatteo Croce1-1/+1
The L3 Master device is just a glue between the core networking code and device drivers, so it should be selected automatically rather than requiring to be enabled explicitly. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21ipvlan: drop ipv6 dependencyMatteo Croce1-1/+0
IPVlan has an hard dependency on IPv6, refactor the ipvlan code to allow compiling it with IPv6 disabled, move duplicate code into addr_equal() and refactor series of if-else into a switch. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03netdevsim: add software driver for testing offloadsJakub Kicinski1-0/+11
To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-10-02net: Add support for networking over Thunderbolt cableAmir Levy1-0/+12
ThunderboltIP is a protocol created by Apple to tunnel IP/ethernet traffic over a Thunderbolt cable. The protocol consists of configuration phase where each side sends ThunderboltIP login packets (the protocol is determined by UUID in the XDomain packet header) over the configuration channel. Once both sides get positive acknowledgment to their login packet, they configure high-speed DMA path accordingly. This DMA path is then used to transmit and receive networking traffic. This patch creates a virtual ethernet interface the host software can use in the same way as any other networking interface. Once the interface is brought up successfully network packets get tunneled over the Thunderbolt cable to the remote host and back. The connection is terminated by sending a ThunderboltIP logout packet over the configuration channel. We do this when the network interface is brought down by user or the driver is unloaded. Signed-off-by: Amir Levy <amir.jer.levy@intel.com> Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross1-1/+1
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-24VSOCK: Add vsockmon deviceGerard Garcia1-0/+8
Add vsockmon virtual network device that receives packets from the vsock transports and exposes them to user space. Based on the nlmon device. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17vmxnet3: prevent building with 64K pagesArnd Bergmann1-0/+3
I got a warning about broken code on ARM64 with 64K pages: drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_rq_init': drivers/net/vmxnet3/vmxnet3_drv.c:1679:29: error: large integer implicitly truncated to unsigned type [-Werror=overflow] rq->buf_info[0][i].len = PAGE_SIZE; 'len' here is a 16-bit integer, so this clearly won't work. I don't think this driver is used much on anything other than x86, so there is no need to fix this properly and we can work around it with a Kconfig dependency to forbid known-broken configurations. qemu in theory supports it on other architectures too, but presumably only for compatibility with x86 guests that also run on vmware. CONFIG_PAGE_SIZE_64KB is used on hexagon, mips, sh and tile, the other symbols are architecture-specific names for the same thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11ipvtap: IP-VLAN based tap driverSainath Grandhi1-0/+13
This patch adds a tap character device driver that is based on the IP-VLAN network interface, called ipvtap. An ipvtap device can be created in the same way as an ipvlan device, using 'type ipvtap', and then accessed using the tap user space interface. Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11tap: tap as an independent moduleSainath Grandhi1-0/+7
This patch makes tap a separate module for other types of virtual interfaces, for example, ipvlan to use. Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08gro_cells: move to net/core/gro_cells.cEric Dumazet1-0/+3
We have many gro cells users, so lets move the code to avoid duplication. This creates a CONFIG_GRO_CELLS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20ipvlan: Fix dependency issueMahesh Bandewar1-0/+1
kbuild-build-bot reported that if NETFILTER is not selected, the build fails pointing to netfilter symbols. Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19ipvlan: Introduce l3s modeMahesh Bandewar1-0/+1
In a typical IPvlan L3 setup where master is in default-ns and each slave is into different (slave) ns. In this setup egress packet processing for traffic originating from slave-ns will hit all NF_HOOKs in slave-ns as well as default-ns. However same is not true for ingress processing. All these NF_HOOKs are hit only in the slave-ns skipping them in the default-ns. IPvlan in L3 mode is restrictive and if admins want to deploy iptables rules in default-ns, this asymmetric data path makes it impossible to do so. This patch makes use of the l3_rcv() (added as part of l3mdev enhancements) to perform input route lookup on RX packets without changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN to change the skb->dev just before handing over skb to L4. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)Pablo Neira1-0/+17
This is an initial implementation of a netdev driver for GTP datapath (GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060 standards. This tunneling protocol is used to prevent subscribers from accessing mobile carrier core network infrastructure. This implementation requires a GGSN userspace daemon that implements the signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon updates the PDP context database that represents active subscriber sessions through a genetlink interface. For more context on this tunneling protocol, you can check the slides that were presented during the NetDev 1.1 [2]. Only IPv4 is supported at this time. [1] http://git.osmocom.org/openggsn/ [2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdf Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net: dummy: remove note about being Y by defaultIvan Babrou1-3/+2
Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17macsec: fix crypto Kconfig dependencyArnd Bergmann1-0/+1
The new MACsec driver uses the AES crypto algorithm, but can be configured even if CONFIG_CRYPTO is disabled, leading to a build error: warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO) warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO) crypto/built-in.o: In function `gcm_enc_copy_hash': aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor' aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy' This adds an explicit 'select CRYPTO' statement the way that other drivers handle it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13macsec: introduce IEEE 802.1AE driverSabrina Dubroca1-0/+7
This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Add IPv6 support to VRF deviceDavid Ahern1-1/+3
Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Add support for l3mdev ops to VRF driverDavid Ahern1-0/+1
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Consolidate Geneve functionality in single module.Pravin B Shelar1-2/+2
geneve_core module handles send and receive functionality. This way OVS could use the Geneve API. Now with use of tunnel meatadata mode OVS can directly use Geneve netdevice. So there is no need for separate module for Geneve. Following patch consolidates Geneve protocol processing in single module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24fjes: Introduce FUJITSU Extended Socket Network Device driverTaku Izumi1-0/+7
This patch adds the basic code of FUJITSU Extended Socket Network Device driver. When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR" to check if "PNP0C02" is for Extended Socket device driver and retrieves ACPI resource information. Then creates platform_device. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20virtio_net: use DECLARE_EWMAJohannes Berg1-1/+0
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA() to create static inlines. On x86/64 this results in no change in code size for me, but reduces the struct receive_queue size by the two unsigned long values that store the parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Introduce VRF device driverDavid Ahern1-0/+7
This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-04Merge tag 'ntb-4.2' of git://github.com/jonmason/ntbLinus Torvalds1-2/+2
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
2015-07-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+14
Pull virtio/vhost cross endian support from Michael Tsirkin: "I have just queued some more bugfix patches today but none fix regressions and none are related to these ones, so it looks like a good time for a merge for -rc1. The motivation for this is support for legacy BE guests on the new LE hosts. There are two redeeming properties that made me merge this: - It's a trivial amount of code: since we wrap host/guest accesses anyway, almost all of it is well hidden from drivers. - Sane platforms would never set flags like VHOST_CROSS_ENDIAN_LEGACY, and when it's clear, there's zero overhead (as some point it was tested by compiling with and without the patches, got the same stripped binary). Maybe we could create a Kconfig symbol to enforce the second point: prevent people from enabling it eg on x86. I will look into this" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-pci: alloc only resources actually used. macvtap/tun: cross-endian support for little-endian hosts vhost: cross-endian support for legacy devices virtio: add explicit big-endian support to memory accessors vhost: introduce vhost_is_little_endian() helper vringh: introduce vringh_is_little_endian() helper macvtap: introduce macvtap_is_little_endian() helper tun: add tun_is_little_endian() helper virtio: introduce virtio_is_little_endian() helper
2015-07-02NTB: Move files in preparation for NTB abstractionAllen Hubbe1-2/+2
This patch only moves files to their new locations, before applying the next two patches adding the NTB Abstraction layer. Splitting this patch from the next is intended make distinct which code is changed only due to moving the files, versus which are substantial code changes in adding the NTB Abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-06-01macvtap/tun: cross-endian support for little-endian hostsGreg Kurz1-0/+14
The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers that are always little-endian. It can also be used to handle the special case of a legacy little-endian device implemented by a big-endian host. Let's add a flag and ioctls for big-endian devices as well. If both flags are set, little-endian wins. Since this is isn't a common usecase, the feature is controlled by a kernel config option (not set by default). Both macvtap and tun are covered by this patch since they share the same API with userland. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-05-13geneve: add initial netdev driver for GENEVE tunnelsJohn W. Linville1-0/+14
This is an initial implementation of a netdev driver for GENEVE tunnels. This implementation uses a fixed UDP port, and only supports point-to-point links with specific partner endpoints. Only IPv4 links are supported at this time. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ipvlan: Fix text that talks about ip util supportMahesh Bandewar1-1/+1
ipvlan was added into 3.19 release and iproute2 added support for the same in iproute2-3.19 package. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06rcu: Make SRCU optional by using CONFIG_SRCUPranith Kumar1-0/+1
SRCU is not necessary to be compiled by default in all cases. For tinification efforts not compiling SRCU unless necessary is desirable. The current patch tries to make compiling SRCU optional by introducing a new Kconfig option CONFIG_SRCU which is selected when any of the components making use of SRCU are selected. If we do not select CONFIG_SRCU, srcu.o will not be compiled at all. text data bss dec hex filename 2007 0 0 2007 7d7 kernel/rcu/srcu.o Size of arch/powerpc/boot/zImage changes from text data bss dec hex filename 831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before 829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after so the savings are about ~2000 bytes. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Josh Triplett <josh@joshtriplett.org> CC: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2014-11-29ipvlan: ipvlan depends on INET and IPV6Mahesh Bandewar1-0/+2
This driver uses ip_out_local() and ip6_route_output() which are defined only if CONFIG_INET and CONFIG_IPV6 are enabled respectively. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24ipvlan: Initial check-in of the IPVLAN driver.Mahesh Bandewar1-0/+18
This driver is very similar to the macvlan driver except that it uses L3 on the frame to determine the logical interface while functioning as packet dispatcher. It inherits L2 of the master device hence the packets on wire will have the same L2 for all the packets originating from all virtual devices off of the same master device. This driver was developed keeping the namespace use-case in mind. Hence most of the examples given here take that as the base setup where main-device belongs to the default-ns and virtual devices are assigned to the additional namespaces. The device operates in two different modes and the difference in these two modes in primarily in the TX side. (a) L2 mode : In this mode, the device behaves as a L2 device. TX processing upto L2 happens on the stack of the virtual device associated with (namespace). Packets are switched after that into the main device (default-ns) and queued for xmit. RX processing is simple and all multicast, broadcast (if applicable), and unicast belonging to the address(es) are delivered to the virtual devices. (b) L3 mode : In this mode, the device behaves like a L3 device. TX processing upto L3 happens on the stack of the virtual device associated with (namespace). Packets are switched to the main-device (default-ns) for the L2 processing. Hence the routing table of the default-ns will be used in this mode. RX processins is somewhat similar to the L2 mode except that in this mode only Unicast packets are delivered to the virtual device while main-dev will handle all other packets. The devices can be added using the "ip" command from the iproute2 package - ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ] Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Laurent Chavey <chavey@google.com> Cc: Tim Hockin <thockin@google.com> Cc: Brandon Philips <brandon.philips@coreos.com> Cc: Pavel Emelianov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30drivers/net: macvtap and tun depend on INETBen Hutchings1-0/+2
These drivers now call ipv6_proxy_select_ident(), which is defined only if CONFIG_INET is enabled. However, they have really depended on CONFIG_INET for as long as they have allowed sending GSO packets from userland. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Fixes: b9fb9ee07e67 ("macvtap: add GSO/csum offload support") Fixes: 5188cd44c55d ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07openvswitch: fix a compilation error when CONFIG_INET is not setW!Andy Zhou1-1/+0
Fix a openvswitch compilation error when CONFIG_INET is not set: ===================================================== In file included from include/net/geneve.h:4:0, from net/openvswitch/flow_netlink.c:45: include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads': >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration] >> return iptunnel_handle_offloads(skb, udp_csum, type); >> ^ >> >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast >> >> cc1: some warnings being treated as errors ===================================================== Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14vxlan: Call udp_sock_createTom Herbert1-0/+1
In vxlan driver call common function udp_sock_create to create the listener UDP port. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)Eric W. Biederman1-5/+0
The netpoll packet receive code only becomes active if the netpoll rx_skb_hook is implemented, and there is not a single implementation of the netpoll rx_skb_hook in the kernel. All of the out of tree implementations I have found all call netpoll_poll which was removed from the kernel in 2011, so this change should not add any additional breakage. There are problems with the netpoll packet receive code. __netpoll_rx does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq context. netpoll_neigh_reply leaks every skb it receives. Reception of packets does not work successfully on stacked devices (aka bonding, team, bridge, and vlans). Given that the netpoll packet receive code is buggy, there are no out of tree users that will be merged soon, and the code has not been used for in tree for a decade let's just remove it. Reverting this commit can server as a starting point for anyone who wants to resurrect netpoll packet reception support. Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>