summaryrefslogtreecommitdiffstats
path: root/drivers/mux
AgeCommit message (Collapse)AuthorFilesLines
2022-02-04mux: Fix struct mux_state kernel-doc commentYang Li1-1/+1
A warning is reported because a colon was dropped, it is found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/mux/core.c:44: warning: Function parameter or member 'state' not described in 'mux_state' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/a9a970fc-63f9-5ab9-4983-fba5b01bebe2@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: fix grammar, missing "is".Peter Rosin1-1/+1
This makes it easier to parse. Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/75067db8-0264-c49c-daa8-d7a877932711@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: add missing mux_state_getPeter Rosin1-11/+29
And implement devm_mux_state_get in terms of the new function. Now we have both mux_state_get and mux_state_put as convenient functions ready to be exported should someone ever need unmanaged interfaces. Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/6f8cfdfd-9fa6-40d1-09b3-0c9fc50835ac@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: Add support for reading mux state from consumer DT nodeAswath Govindraju1-21/+198
In some cases, we might need to provide the state of the mux to be set for the operation of a given peripheral. Therefore, pass this information using mux-states property. Link: https://lore.kernel.org/lkml/20211123081222.27979-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> (minor edits) Link: https://lore.kernel.org/r/aac25be8-9515-a980-f7cb-709938c84822@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21mux: add support for delay after muxingVincent Whitchurch1-6/+32
Hardware may require some time for the muxed analog signals to settle after the muxing is changed. Allow users of the mux subsystem to specify this delay with the new mux_control_select_delay() function (and the _try equivalent). Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20211007134641.13417-2-vincent.whitchurch@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-02mux: gpio: Simplify code by using dev_err_probe()Andy Shevchenko1-6/+3
Use already prepared dev_err_probe() introduced by the commit a787e5400a1c ("driver core: add device probe log helper"). It simplifies EPROBE_DEFER handling. Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210330193325.68362-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02mux: gpio: Make it OF independentAndy Shevchenko1-2/+2
Module doesn't use OF APIs anyhow, make it OF independent by replacing headers and dropping useless of_match_ptr() call. Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210330193325.68362-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02mux: gpio: Use bitmap API instead of direct assignmentAndy Shevchenko1-2/+4
Assigning bitmaps like it's done in the driver might be error prone. Fix this by using bitmap API. Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210330193325.68362-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-29mux: adgs1408: Add mod_devicetable.h and remove of_match_ptrAndy Shevchenko1-3/+3
Enables probing via the ACPI PRP0001 route but more is mostly about removing examples of this that might get copied into new drivers. Also fixes drivers/mux/adgs1408.c:112:34: warning: unused variable 'adgs1408_of_match as has been reported recently. Fixes: e9e40543ad5b ("spi: Add generic SPI multiplexer") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200529145726.5708-1-peda@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30drivers: Introduce device lookup variants by of_nodeSuzuki K Poulose1-6/+1
Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: devicetree@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Alan Tull <atull@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Peter Rosin <peda@axentia.se> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # I2C part Acked-by: Moritz Fischer <mdf@kernel.org> # For FPGA part Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21mux: mmio: add generic regmap bitfield-based multiplexerPankaj Bansal2-7/+11
Generic register bitfield-based multiplexer that controls the multiplexer producer defined under a parent node. The driver corresponding to parent node provides register read/write capabilities. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-23Merge tag 'gpio-v4.20-1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver" * tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits) gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip() gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip() gpio: Drop parent irq assignment during cascade setup mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap gpio: fix SNPS_CREG kconfig dependency warning gpiolib: Initialize gdev field before is used gpio: fix kernel-doc after devres.c file rename gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip gpio: syscon: Fix possible NULL ptr usage gpiolib: Show correct direction from the beginning pinctrl: msm: Use init_valid_mask exported function gpiolib: Add init_valid_mask exported function GPIO: add single-register GPIO via CREG driver dt-bindings: Document the Synopsys GPIO via CREG bindings gpio: mockup: use device properties instead of platform_data gpio: Slightly more helpful debugfs gpio: omap: Remove set but not used variable 'dev' gpio: omap: drop omap_gpio_list Accept partial 'gpio-line-names' property. gpio: omap: get rid of the conditional PM runtime calls ...
2018-10-12mux: adgs1408: use the correct MODULE_LICENSEPeter Rosin1-1/+1
The file is GPL v2 or later. Acked-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik1-1/+2
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik1-9/+4
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-02mux: adgs1408: new driver for Analog Devices ADGS1408/1409 muxMircea Caprioru3-0/+143
This patch adds basic support for Analog Device ADGS1408/09 SPI mux controller. The device is probed and set to a disabled state. It uses the new mux controller framework. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23mux: adg792a: switch to using .probe_newPeter Rosin1-3/+2
Use the new probe style for i2c drivers. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds6-16/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-01-09mux: add SPDX identifiers to all mux source filesPeter Rosin6-16/+6
Remove all free-text license texts. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. No copyright headers or other non-license-description text was removed. Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09mux: core: fix double get_device()Hans de Goede1-1/+3
class_find_device already does a get_device on the returned device. So the device returned by of_find_mux_chip_by_node is already referenced and we should not reference it again (and unref it on error). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Rosin <peda@axentia.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29mux: make device_type constBhumika Goyal1-1/+1
Make this const as it is only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28mux: zap mux- prefix from the source filesPeter Rosin5-0/+5
Preserve the module names with Makefile additions. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28mux: convert to using %pOF instead of full_nameRob Herring1-6/+6
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17mux: mux-core: unregister mux_class in mux_exit()Kuppuswamy Sathyanarayanan1-1/+1
Fixes an obvious and nasty typo. Fixes: a3b02a9c6591 ("mux: minimal mux subsystem") Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17mux: remove the Kconfig question for the subsystemPeter Rosin1-14/+5
The MULTIPLEXER question in the Kconfig might be confusing and is of dubious value. Remove it. This makes consumers responsible for selecting MULTIPLEXER, which they already do. Signed-off-by: Peter Rosin <peda@axentia.se> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09mux: adg792a: always require I2C supportArnd Bergmann1-1/+1
COMPILE_TEST makes no sense when I2C is disabled, as the driver cannot compile in that configuration: drivers/mux/mux-adg792a.c: In function 'adg792a_write_cmd': drivers/mux/mux-adg792a.c:34:9: error: implicit declaration of function 'i2c_smbus_write_byte_data'; did you mean 'i2c_set_clientdata'? [-Werror=implicit-function-declaration] drivers/mux/mux-adg792a.o: In function `adg792a_driver_init': mux-adg792a.c:(.init.text+0x14): undefined reference to `i2c_register_driver' drivers/mux/mux-adg792a.o: In function `adg792a_probe': mux-adg792a.c:(.text.adg792a_probe+0x94): undefined reference to `i2c_smbus_write_byte_data' drivers/mux/mux-adg792a.o: In function `adg792a_set': mux-adg792a.c:(.text.adg792a_set+0x80): undefined reference to `i2c_smbus_write_byte_data' Fixes: afda08c4caa9 ("mux: adg792a: add mux controller driver for ADG792A/G") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03mux: mmio-based syscon mux controllerPhilipp Zabel3-0/+155
This adds a driver for mmio-based syscon multiplexers controlled by bitfields in a syscon register range. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03mux: adg792a: add mux controller driver for ADG792A/GPeter Rosin3-0/+170
Analog Devices ADG792A/G is a triple 4:1 mux. Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03mux: gpio: add mux controller driver for gpio based multiplexersPeter Rosin3-0/+133
The driver builds a single multiplexer controller using a number of gpio pins. For N pins, there will be 2^N possible multiplexer states. The GPIO pins can be connected (by the hardware) to several multiplexers, which in that case will be operated in parallel. Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03mux: minimal mux subsystemPeter Rosin3-0/+568
Add a new minimalistic subsystem that handles multiplexer controllers. When multiplexers are used in various places in the kernel, and the same multiplexer controller can be used for several independent things, there should be one place to implement support for said multiplexer controller. A single multiplexer controller can also be used to control several parallel multiplexers, that are in turn used by different subsystems in the kernel, leading to a need to coordinate multiplexer accesses. The multiplexer subsystem handles this coordination. Thanks go out to Lars-Peter Clausen, Jonathan Cameron, Rob Herring, Wolfram Sang, Paul Gortmaker, Dan Carpenter, Colin Ian King, Greg Kroah-Hartman and last but certainly not least to Philipp Zabel for helpful comments, reviews, patches and general encouragement! Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 09:43:07 +0000