summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2020-06-10Merge tag 'for-linus-5.8-rc1' of ↵Linus Torvalds4-25/+57
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI update from Richard Weinberger: "This contains a single change for UBI: - Select fastmap anchor PEBs considering wear level rules" * tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Select fastmap anchor PEBs considering wear level rules
2020-06-10Merge tag 'mtd/for-5.8' of ↵Linus Torvalds83-2484/+4131
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05mtd: clear cache_state to avoid writing to bad blocks repeatedlyXiaoming Ni1-4/+7
The function call process is as follows: mtd_blktrans_work() while (1) do_blktrans_request() mtdblock_writesect() do_cached_write() write_cached_data() /*if cache_state is STATE_DIRTY*/ erase_write() write_cached_data() returns failure without modifying cache_state and cache_offset. So when do_cached_write() is called again, write_cached_data() will be called again to perform erase_write() on the same cache_offset. But if this cache_offset points to a bad block, erase_write() will always return -EIO. Writing to this mtdblk is equivalent to losing the current data, and repeatedly writing to the bad block. Repeatedly writing a bad block has no real benefits, but brings some negative effects: 1 Lost subsequent data 2 Loss of flash device life 3 erase_write() bad blocks are very time-consuming. For example: the function do_erase_oneblock() in chips/cfi_cmdset_0020.c or chips/cfi_cmdset_0002.c may take more than 20 seconds to return Therefore, when erase_write() returns -EIO in write_cached_data(), clear cache_state to avoid writing to bad blocks repeatedly. Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-05mtd: parser: cmdline: Support MTD names containing one or more colonsBoris Brezillon1-3/+20
Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ron Minnich <rminnich@google.com> Tested-by: Ron Minnich <rminnich@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-05mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'Jason Yan1-5/+0
It's not used by anyone now, remove it. Fix the following gcc warning: drivers/mtd/maps/physmap-gemini.c:49:34: warning: ‘syscon_match’ defined but not used [-Wunused-const-variable=] static const struct of_device_id syscon_match[] = { ^~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-03Merge tag 'cfi/for-5.8' of ↵Richard Weinberger1-5/+8
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes: * Support the absence of protection registers for Intel CFI flashes * Replace zero-length array with flexible-arrays
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02ubi: Select fastmap anchor PEBs considering wear level rulesArne Edholm4-25/+57
There is a risk that the fastmap anchor PEB is alternating between just two PEBs, the current anchor and the previous anchor that was just deleted. As the fastmap pools gets the first take on free PEBs, the pools may leave no free PEBs to be selected as the new anchor, resulting in the two PEBs alternating behaviour. If the anchor PEBs gets a high erase count the PEBs will not be used by the pools but remain in ubi->free, even more increasing the likelihood they will be used as anchors. Getting stuck using only a couple of PEBs continuously will result in an uneven wear, eventually leading to failure. To fix this: - Choose the fastmap anchor when the most free PEBs are available. This is during rebuilding of the fastmap pools, after the unused pool PEBs are added to ubi->free but before the pools are populated again from the free PEBs. Also reserve an additional second best PEB as a candidate for the next time the fast map anchor is updated. If a better PEB is found the next time the fast map anchor is updated, the candidate is made available for building the pools. - Enable anchor move within the anchor area again as it is useful for distributing wear. - The anchor candidate for the next fastmap update is the most suited free PEB. Check this PEB's erase count during wear leveling. If the wear leveling limit is exceeded, the PEB is considered unsuitable for now. As all other non used anchor area PEBs should be even worse, free up the used anchor area PEB with the lowest erase count. Signed-off-by: Arne Edholm <arne.edholm@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02mm: remove the pgprot argument to __vmallocChristoph Hellwig1-2/+2
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv] Acked-by: Gao Xiang <xiang@kernel.org> [erofs] Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01Merge tag 'pstore-v5.8-rc1' of ↵Linus Torvalds3-0/+589
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore updates from Kees Cook: "Fixes and new features for pstore. This is a pretty big set of changes (relative to past pstore pulls), but it has been in -next for a while. The biggest change here is the ability to support a block device as a pstore backend, which has been desired for a while. A lot of additional fixes and refactorings are also included, mostly in support of the new features. - refactor pstore locking for safer module unloading (Kees Cook) - remove orphaned records from pstorefs when backend unloaded (Kees Cook) - refactor dump_oops parameter into max_reason (Pavel Tatashin) - introduce pstore/zone for common code for contiguous storage (WeiXiong Liao) - introduce pstore/blk for block device backend (WeiXiong Liao) - introduce mtd backend (WeiXiong Liao)" * tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits) mtd: Support kmsg dumper based on pstore/blk pstore/blk: Introduce "best_effort" mode pstore/blk: Support non-block storage devices pstore/blk: Provide way to query pstore configuration pstore/zone: Provide way to skip "broken" zone for MTD devices Documentation: Add details for pstore/blk pstore/zone,blk: Add ftrace frontend support pstore/zone,blk: Add console frontend support pstore/zone,blk: Add support for pmsg frontend pstore/blk: Introduce backend for block devices pstore/zone: Introduce common layer to manage storage zones ramoops: Add "max-reason" optional field to ramoops DT node pstore/ram: Introduce max_reason and convert dump_oops pstore/platform: Pass max_reason to kmesg dump printk: Introduce kmsg_dump_reason_str() printk: honor the max_reason field in kmsg_dumper printk: Collapse shutdown types into a single dump reason pstore/ftrace: Provide ftrace log merging routine pstore/ram: Refactor ftrace buffer merging pstore/ram: Refactor DT size parsing ...
2020-06-01Merge tag 'spi-nor/for-5.8' of ↵Richard Weinberger12-44/+122
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - add, update support and fix few flashes - prepare BFPT parsing for JESD216 rev D - kernel doc fixes
2020-06-01Merge tag 'nand/for-5.8' of ↵Richard Weinberger68-2423/+3974
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).
2020-05-31mtd: Support kmsg dumper based on pstore/blkWeiXiong Liao3-0/+589
This introduces mtdpstore, which is similar to mtdoops but more powerful. It uses pstore/blk, and aims to store panic and oops logs to a flash partition, where pstore can later read back and present as files in the mounted pstore filesystem. To make mtdpstore work, the "blkdev" of pstore/blk should be set as MTD device name or MTD device number. For more details, see Documentation/admin-guide/pstore-blk.rst This solves a number of issues: - Work duplication: both of pstore and mtdoops do the same job storing panic/oops log. They have very similar logic, registering to kmsg dumper and storing logs to several chunks one by one. - Layer violations: drivers should provides methods instead of polices. MTD should provide read/write/erase operations, and allow a higher level drivers to provide the chunk management, kmsg dump configuration, etc. - Missing features: pstore provides many additional features, including presenting the logs as files, logging dump time and count, and supporting other frontends like pmsg, console, etc. Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com> Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/ Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31mtd: rawnand: Add an invalid ECC mode to discriminate with valid onesMiquel Raynal1-1/+1
NAND ECC modes (or providers) have their own enumeration but, unlike their algorithms counterpart, there is no invalid or uninitialized value to discriminate between an error and having chosen a no-ECC situation. Add an "invalid" entry for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-7-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Return an enum from of_get_nand_ecc_algo()Miquel Raynal1-16/+19
There is an enumeration to list ECC algorithm, let's use it instead of returning an int. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-6-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Drop OOB_FIRST placement schemeMiquel Raynal2-109/+98
This scheme has been introduced for the Davinci controller and means that the OOB area must be read *before* the rest of the data. This has nothing to do with the ECC in OOB placement as it could be understood and most importantly, there is no point in having this function out of the Davinci NAND controller driver. A DT property for this scheme has been added but never used, even by the Davinci driver which only uses this scheme to change the default nand_read_page(). Move the main read_page() helper into the Davinci driver and remove the remaining boilerplate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-4-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Avoid a typedefMiquel Raynal1-2/+2
In new code, the use of typedef is discouraged. Turn this one in the raw NAND core into a regular enumeration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-3-miquel.raynal@bootlin.com
2020-05-31mtd: Fix typo in mtd_ooblayout_set_databytes() descriptionMiquel Raynal1-1/+1
Fix a probable copy/paste error: the function works like mtd_ooblayout_set_bytes(), not *_get_bytes(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-2-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Stop using nand_release()Miquel Raynal1-12/+0
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Now that all drivers have been converted to do not use nand_release() anymore, let's remove this helper. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-63-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Reorganize ns_cleanup_module()Miquel Raynal1-22/+22
Reorganize ns_cleanup_module() to fit the reworked exit path of ns_init_module(). There is no need for a ns_free_lists() function anymore, so drop it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-18-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Rename a label in ns_init_module()Miquel Raynal1-3/+3
Rename the "error" label to gave it a meaning. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-17-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Manage lists on error in ns_init_module()Miquel Raynal1-4/+19
Lists are filled with calls to ns_parse_weakblocks(), ns_parse_weakpages() and ns_parse_gravepages(). Handle them in the error path, all at the same time. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-16-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup()Miquel Raynal1-3/+3
Drop the generic err_exit. The remaining operation to do from this goto statement is to cleanup the NAND allocations, so rename it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-15-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Free erase_block_wear on errorMiquel Raynal1-1/+3
Free erase_block_wear on error, which is allocated by ns_setup_wear_reporting(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-14-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Use an additional label when freeing the nandsim objectMiquel Raynal1-3/+4
Cosmetic change to give a meaning to all labels in this complicated error path. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-13-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Stop using nand_release()Miquel Raynal1-2/+4
nand_release() basically calls mtd_device_unregister() and nand_cleanup(). Both helpers should be called after MTD device registration and NAND scan, respectively. Drop nand_release() and use the two helpers directly so that they fit the error path and the labels there. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-12-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Free the partition names in ns_free()Miquel Raynal1-6/+6
ns_free() is the helper that is called symmetrically to ns_init() and so should free the same objects, including the partition names. Now, callers of ns_free() do not need to free this partition names themselves. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-11-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Free the allocated device on error in ns_init()Miquel Raynal1-1/+3
The nandsim device is allocated and initialized inside ns_init() by a call to ns_alloc_device(), free it on error. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-10-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Free partition names on error in ns_init()Miquel Raynal1-4/+13
The ns_init() function shall free the partition names allocated by ns_get_partition_name() on error. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-9-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Fix the two ns_alloc_device() error pathsMiquel Raynal1-9/+17
The ns_alloc_device() helper has actually two distinct path. Handle errors in both of them. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-8-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Remove debugfs entries at unload timeMiquel Raynal1-0/+6
Create a ns_debugfs_remove() helper for that and call it in ns_cleanup_module(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-7-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Keep track of the created debugfs entriesMiquel Raynal1-4/+6
Debugfs entries should be removed in the error path, so first, keep track of them. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-6-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Clean error handlingMiquel Raynal1-19/+27
Many function calls are done this way: if ((retval = func()) != 0) return retval; while we expect in the kernel function calls like: retval = func(); if (retval) return retval; Apply this change where possible and also use "ret" instead of "retval" in ns_init_module for consistency, as it is only used in this function. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-5-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Use a consistent ns_ prefix for all functionsMiquel Raynal1-117/+131
Some functions are prefixed "nandsim_", others "ns_" and many are simply not prefixed at all. Make this file consistent by prefixing all functions by "ns_". This is a mechanical change. Sometimes the line is a bit reworked as well to fit the kernel coding style. For instance, there are several places where displayed strings are cut. When one of this line is changed because of the naming update, the two parts of the strings gets concatenated. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-4-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Use octal permissionsMiquel Raynal1-1/+1
Symbolic permissions 'S_IRUSR' are not preferred. Checkpatch.pl advises to use octal permissions '0400'. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-3-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: nandsim: Consistent use of 'ns' instead of 'dev'Miquel Raynal1-4/+4
The nandsim object is called 'ns' almost everywhere, keep it that way everywhere for consistency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200525085851.17682-2-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: brcmnand: support v2.1-v2.2 controllersÁlvaro Fernández Rojas1-9/+76
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename page sizesÁlvaro Fernández Rojas1-2/+2
Current pages sizes apply to controllers after v3.4 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-4-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas1-2/+3
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename v4 registersÁlvaro Fernández Rojas1-4/+4
These registers are also used on v3.3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-2-noltari@gmail.com
2020-05-31mtd: rawnand: gpmi: Use nand_extract_bits()Miquel Raynal1-164/+10
Drop the use of gpmi_copy_bits() in favor of the NAND helper nand_extract_bits(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200508171805.8627-1-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: omap_elm: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522104008.28340-1-dinghao.liu@zju.edu.cn
2020-05-31mtd: rawnand: gpmi: Fix runtime PM imbalance in gpmi_nand_probeDinghao Liu1-1/+1
There is no reason that the failure of __gpmi_enable_clk() could lead to PM usage counter decrement. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522101713.24350-1-dinghao.liu@zju.edu.cn
2020-05-31mtd: rawnand: gpmi: Fix runtime PM imbalance on errorDinghao Liu1-1/+3
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522095139.19653-1-dinghao.liu@zju.edu.cn
2020-05-31mtd: rawnand: ingenic: Convert the driver to exec_op()Boris Brezillon1-56/+83
Let's convert the driver to exec_op() to have one less driver relying on the legacy interface. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519232454.374081-4-boris.brezillon@collabora.com
2020-05-31mtd: rawnand: ingenic: Fix the RB gpio active-high property on qi, lb60Boris Brezillon1-1/+13
The rb-gpios semantics was undocumented and qi,lb60 (along with the ingenic driver) got it wrong. The active state encodes the NAND ready state, which is high level. Since there's no signal inverter on this board, it should be active-high. Let's fix that here for older DTs so we can re-use the generic nand_gpio_waitrdy() helper, and be consistent with what other drivers do. Suggested-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519232454.374081-3-boris.brezillon@collabora.com
2020-05-31mtd: rawnand: xway: Stop using nand_release()Miquel Raynal1-1/+5
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-62-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: xway: Fix the probe error pathMiquel Raynal1-1/+1
nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: vf610: Stop using nand_release()Miquel Raynal1-1/+5
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Stefan Agner <stefan@agner.ch> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-60-miquel.raynal@bootlin.com