summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2019-11-01mtd: spi-nor: Don't overwrite errno from Reg OpsTudor Ambarus1-7/+6
Do not overwrite the error numbers received the Register Operations methods. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-11-01mtd: spi-nor: Drop explicit cast to int to already int valueTudor Ambarus1-9/+6
ret is already of type int. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-11-01mtd: spi-nor: Stop compare with negative in Reg Ops methodsTudor Ambarus1-10/+13
spi_mem_exec_op() nor->controller_ops->write_reg() nor->controller_ops->read_reg() spi_nor_wait_till_ready() Return 0 on success, -errno otherwise. Stop compare with negative and compare with zero in all the register operations methods. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-11-01mtd: spi-nor: Group all Reg Ops to avoid forward declarationsTudor Ambarus1-213/+213
Group all register methods up in the file, to avoid forward declarations. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-11-01mtd: spi-nor: Drop duplicated new lineTudor Ambarus1-1/+0
Two new lines, one after another, drop one. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-11-01mtd: spi-nor: Prepend spi_nor_ to all Reg Ops methodsTudor Ambarus1-54/+56
All the core functions should begin with "spi_nor_". Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-10-30mtd: rawnand: remove unecessary checking if dmac is NULLPiotr Sroka1-2/+2
Remove unecessary checking if dmac is NULL. If Cadence nand controller driver uses DMA engine then cdns_ctrl->dmac cannot be NULL. It is verified during driver initialization. If Cadence nand controller driver does not use DMA engine then CPU IO read/write are executed instead of slave DMA transfer. In that case cdns_ctrl->dmac is not used at all. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Piotr Sroka <piotrs@cadence.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: rawnand: cadence: Remove dev_err() on platform_get_irq() failureYueHaibing1-3/+2
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: rawnand: mxic: Remove dev_err() on platform_get_irq() failureYueHaibing1-3/+1
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: rawnand: brcmnand: Fix NULL pointer assignmentFlorian Fainelli1-1/+1
Sparse complained about the following: drivers/mtd/nand/raw/brcmnand/brcmnand.c:921:40: warning: Using plain integer as NULL pointer fix this issue by assigning the pointer to NULL. Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: rawnand: denali: remove the old unified controller/chip DT supportMasahiro Yamada1-51/+4
Commit d8e8fd0ebf8b ("mtd: rawnand: denali: decouple controller and NAND chips") supported the new binding for the separate controller/chip representation, keeping the backward compatibility. All the device trees in upstream migrated to the new binding. Remove the support for the old binding. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: spear_smi: Fix Write Burst modeMiquel Raynal1-1/+37
Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-29mtd: physmap_of: add a hook for Intel IXP4xx flash probingLinus Walleij5-0/+166
In order to support device tree probing of IXP4xx NOR flash chips, a certain big-endian or mixed-endian memory access pattern need to be used. I have opted to use the pattern set by previous plug-ins to physmap for Gemini and Versatile, just override some functions and reuse most of the physmap core code as it is to minimize maintenance. Parts of drivers/mtd/ixp4xx.c are copied into this file. After we have IXP4xx converted fully to device tree, the drivers/mtd/ixp4xx.c file will be deleted and this will be the only access pattern to the IXP4xx flash. I did not keep the quirk in the flash write function after probe, where the old code for a while checks for access to odd addresses, fails and assigns a "faster" write function once it has convinced probe to only use 2-byte accesses. As we mandate that this device should be using bank-width = <2> this should not be a problem unless misconfigured. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: maps: l440gx: Avoid printing address to dmesgFuqian Huang1-1/+1
Avoid printing the address of l440gx_map.virt every time l440gx init. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-23compat_ioctl: move drivers to compat_ptr_ioctlArnd Bergmann1-33/+3
Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-23mtd: spi-nor: cadence-quadspi: Fix cqspi_command_read() definitionTudor Ambarus1-8/+7
n_tx was never used, drop it. Replace 'const u8 *txbuf' with 'u8 opcode', to comply with the SPI NOR int (*read_reg)() method. The 'const' qualifier has no meaning for parameters passed by value, drop it. Going furher, the opcode was passed to cqspi_calc_rdreg() and never used, drop it. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-10-23mtd: spi-nor: Introduce 'struct spi_nor_controller_ops'Tudor Ambarus7-96/+136
Move all SPI NOR controller driver specific ops in a dedicated structure. 'struct spi_nor' becomes lighter. Use size_t for lengths in 'int (*write_reg)()' and 'int (*read_reg)()'. Rename wite/read_buf to buf, the name of the functions are suggestive enough. Constify buf in int (*write_reg). Comply with these changes in the SPI NOR controller drivers. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-10-23mtd: spi-nor: hisi-sfc: Drop nor->erase NULL assignmentTudor Ambarus1-1/+0
The pointer to 'struct spi_nor' is kzalloc'ed above in the code. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-10-23mtd: spi-nor: add support for en25qh16DENG Qingfang1-0/+2
Tested on HiWiFi C526A Datasheet is available at: http://www.xinyahong.com/upLoad/product/month_1411/201411201256018276.pdf Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-23mtd: spi-nor: intel-spi: add support for Intel Cannon Lake SPI flashJethro Beekman2-0/+16
Now that SPI flash controllers without a software sequencer are supported, it's trivial to add support for CNL and its PCI ID. Values from https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/300-series-chipset-pch-datasheet-vol-2.pdf Signed-off-by: Jethro Beekman <jethro@fortanix.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-23mtd: spi-nor: intel-spi: support chips without software sequencerJethro Beekman1-7/+16
Some flash controllers don't have a software sequencer. Avoid configuring the register addresses for it, and double check everywhere that its not accidentally trying to be used. Every use of `sregs` is now guarded by a check of `sregs` or `swseq_reg`. The check might be done in the calling function. Signed-off-by: Jethro Beekman <jethro@fortanix.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08mtd: st_spi_fsm: remove unused field from struct stfsmBartosz Golaszewski1-1/+0
The 'region' field in struct stfsm is unused and can be removed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: Initialize all parameters of mtd_oob_opsMiquel Raynal1-5/+5
Most of the time the ooboffs parameter of the mtd_oob_ops structure was initialized only when needed. Since the introduction of the SPI-NAND subsystem, this parameter is transferred into nand_page_io_req structure automatically and may be used by any SPI-NAND user. Before this happens, initialize all the structure parameters when they are created in mtdchar.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: spear_smi: remove set but not used variable 'flash_info'zhengbin1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/spear_smi.c: In function spear_smi_probe_config_dt: drivers/mtd/devices/spear_smi.c:780:32: warning: variable flash_info set but not used [-Wunused-but-set-variable] It is not used since commit 6551ab5d30d6 ("mtd: add device-tree support to spear_smi") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: Remove dev_err() usage after platform_get_irq()Stephen Boyd13-37/+11
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-07mtd: rawnand: au1550nd: Fix au_read_buf16() prototypePaul Burton1-3/+2
Commit 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks") modified the prototype of the struct nand_chip read_buf function pointer. In the au1550nd driver we have 2 implementations of read_buf. The previously mentioned commit modified the au_read_buf() implementation to match the function pointer, but not au_read_buf16(). This results in a compiler warning for MIPS db1xxx_defconfig builds: drivers/mtd/nand/raw/au1550nd.c:443:57: warning: pointer type mismatch in conditional expression Fix this by updating the prototype of au_read_buf16() to take a struct nand_chip pointer as its first argument, as is expected after commit 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks"). Note that this shouldn't have caused any functional issues at runtime, since the offset of the struct mtd_info within struct nand_chip is 0 making mtd_to_nand() effectively a type-cast. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks") Cc: stable@vger.kernel.org # v4.20+ Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: spi-nor: Fix direction of the write_sr() transferTudor Ambarus1-1/+1
write_sr() sends data to the SPI memory, fix the direction. Fixes: b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: John Garry <john.garry@huawei.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: rawnand: Add new Cadence NAND driver to MTD subsystemPiotr Sroka3-0/+3039
Add new Cadence NAND driver to MTD subsystem Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: rawnand: Change calculating of position page containing BBMPiotr Sroka2-3/+9
Change calculating of position page containing BBM If none of BBM flags are set then function nand_bbm_get_next_page reports EINVAL. It causes that BBM is not read at all during scanning factory bad blocks. The result is that the BBT table is build without checking factory BBM at all. For Micron flash memories none of these flags are set if page size is different than 2048 bytes. Address this regression by: - adding NAND_BBM_FIRSTPAGE chip flag without any condition. It solves issue only for Micron devices. - changing the nand_bbm_get_next_page_function. It will return 0 if no of BBM flag is set and page parameter is 0. After that modification way of discovering factory bad blocks will work similar as in kernel version 5.1. Cc: stable@vger.kernel.org Fixes: f90da7818b14 (mtd: rawnand: Support bad block markers in first, second or last page) Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: nand: brcmnand: Add support for flash-dma v0Kamal Dasu1-2/+19
This change adds support for flash dma v0.0. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-544/+0
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-21Merge tag 'upstream-5.4-rc1' of ↵Linus Torvalds3-11/+44
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI, UBIFS and JFFS2 updates from Richard Weinberger: "UBI: - Be less stupid when placing a fastmap anchor - Try harder to get an empty PEB in case of contention - Make ubiblock to warn if image is not a multiple of 512 UBIFS: - Various fixes in error paths JFFS2: - Various fixes in error paths" * tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix memory leak in jffs2_scan_eraseblock() error path jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree() ubi: block: Warn if volume size is not multiple of 512 ubifs: Fix memory leak bug in alloc_ubifs_info() error path ubifs: Fix memory leak in __ubifs_node_verify_hmac error path ubifs: Fix memory leak in read_znode() error path ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB ubi: Don't do anchor move within fastmap area ubifs: Remove redundant assignment to pointer fname
2019-09-21Merge tag 'mtd/for-5.4' of ↵Linus Torvalds43-1414/+2273
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - add debugfs nodes for querying the flash name and id - mtd parser reorganization SPI NOR core changes: - always use bounce buffer for register read/writes - move m25p80 code in spi-nor.c - rework hwcaps selection for the spi-mem case - rework the core in order to move the manufacturer specific code out of it: - regroup flash parameters in 'struct spi_nor_flash_parameter' - add default_init() and post_sfdp() hooks to tweak the flash parameters - introduce the ->set_4byte(), ->convert_addr() and ->setup() methods, to deal with manufacturer specific code - rework the SPI NOR lock/unlock logic - fix an error code in spi_nor_read_raw() - fix a memory leak bug - enable the debugfs for the partname and partid - add support for few flashes SPI NOR controller drivers changes: - intel-spi: - Whitelist 4B read commands - Add support for Intel Tiger Lake SPI serial flash - aspeed-smc: Add of_node_put() - hisi-sfc: add of_node_put() - cadence-quadspi: Fix QSPI RCU Schedule Stall NAND core: - Fixing typos - Adding missing of_node_put() in various drivers Raw NAND controller drivers: - Macronix: new controller driver - Omap2: fix the number of bitflips returned - Brcmnand: fix a pointer not iterating over all the page chunks - W90x900: driver removed - Onenand: fix a memory leak - Sharpsl: missing include guard - STM32: avoid warnings when building with W=1 - Ingenic: fix a coccinelle warning - r852: call a helper to simplify the code CFI core: - Kill useless initializer in mtd_do_chip_probe() - Fix a rare write failure seen on some cfi_cmdset_0002 compliant Parallel NORs - Bunch of cleanups for cfi_cmdset_0002 driver's write functions by Tokunori Ikegami" * tag 'mtd/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (77 commits) mtd: pmc551: Remove set but not used variable 'soff_lo' mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing mode mtd: sm_ftl: Fix memory leak in sm_init_zone() error path mtd: parsers: Move CMDLINE parser mtd: parsers: Move OF parser mtd: parsers: Move BCM63xx parser mtd: parsers: Move BCM47xx parser mtd: parsers: Move TI AR7 parser mtd: pismo: Simplify getting the adapter of a client mtd: phram: Module parameters add writable permissions mtd: pxa2xx: Use ioremap_cache insted of ioremap_cached mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)" mtd: spi-nor: Add support for mt35xu02g mtd: rawnand: omap2: Fix number of bitflips reporting with ELM mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfips mtd: spi-nor: remove superfluous pass of nor->info->sector_size mtd: spi-nor: enable the debugfs for the partname and partid mtd: mtdcore: add debugfs nodes for querying the flash name and id mtd: spi-nor: hisi-sfc: Add of_node_put() before break mtd: spi-nor: aspeed-smc: Add of_node_put() ...
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds1-189/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-18Merge branch 'work.mount-base' of ↵Linus Torvalds2-2/+178
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API infrastructure updates from Al Viro: "Infrastructure bits of mount API conversions. The rest is more of per-filesystem updates and that will happen in separate pull requests" * 'work.mount-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mtd: Provide fs_context-aware mount_mtd() replacement vfs: Create fs_context-aware mount_bdev() replacement new helper: get_tree_keyed() vfs: set fs_context::user_ns for reconfigure
2019-09-15mtd: pmc551: Remove set but not used variable 'soff_lo'zhengbin1-6/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/pmc551.c: In function pmc551_erase: drivers/mtd/devices/pmc551.c:142:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_read: drivers/mtd/devices/pmc551.c:232:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_write: drivers/mtd/devices/pmc551.c:289:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] It is not used since commit cdf0a7d16980 ("[MTD] pmc551 whitespace cleanup") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing modeTokunori Ikegami1-1/+1
The chip state is set to erasing by the function after getting chip. So it should be to get chip as erasing mode at first. But previously it was to get chip as writing mode then fix as erasing. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: sm_ftl: Fix memory leak in sm_init_zone() error pathWenwen Wang1-1/+4
In sm_init_zone(), 'zone->lba_to_phys_table' is allocated through kmalloc_array() and 'zone->free_sectors' is allocated in kfifo_alloc() respectively. However, they are not deallocated in the following execution if sm_read_sector() fails, leading to memory leaks. To fix this issue, free them before returning -EIO. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: parsers: Move CMDLINE parserLinus Walleij5-38/+38
This moves the CMDLINE partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: parsers: Move OF parserLinus Walleij5-10/+11
This moves the OF/device tree partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: parsers: Move BCM63xx parserLinus Walleij5-10/+10
This moves the BCM63xx partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: parsers: Move BCM47xx parserLinus Walleij5-8/+8
This moves the BCM47xx partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: parsers: Move TI AR7 parserLinus Walleij5-6/+6
This moves the TI AR7 partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: pismo: Simplify getting the adapter of a clientWolfram Sang1-2/+1
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: phram: Module parameters add writable permissionsXiaoming Ni1-1/+1
The phram code implements managing multiple devices through a linked list. However, due to the module parameter permission of 0, the /sys/module/phram/parameters/phram interface is missing. The command line arguments in insmod can only create one device. Therefore, add writable permissions to the module parameters, create /sys/module/phram/parameters/phram interface, and create multi-device support. Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: pxa2xx: Use ioremap_cache insted of ioremap_cachedChristoph Hellwig1-2/+1
pxa2xx-flash is the only user of ioremap_cached, which is an alias for ioremap_cache anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15Merge tag 'cfi/for-5.4-rc1' of https://github.com/r-vignesh/linux into ↵Richard Weinberger2-113/+186
mtd/for-5.4 CFI core * Kill useless initializer in mtd_do_chip_probe() * Fix a rare write failure seen on some cfi_cmdset_0002 compliant Parallel NORs * Bunch of cleanups for cfi_cmdset_0002 driver's write functions by Tokunori Ikegami <ikegami.t@gmail.com>
2019-09-15Merge tag 'spi-nor/for-5.4' of ↵Richard Weinberger11-827/+1358
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/for-5.4 MTD core changes: - add debugfs nodes for querying the flash name and id SPI NOR core changes: - always use bounce buffer for register read/writes - move m25p80 code in spi-nor.c - rework hwcaps selection for the spi-mem case - rework the core in order to move the manufacturer specific code out of it: - regroup flash parameters in 'struct spi_nor_flash_parameter' - add default_init() and post_sfdp() hooks to tweak the flash parameters - introduce the ->set_4byte(), ->convert_addr() and ->setup() methods, to deal with manufacturer specific code - rework the SPI NOR lock/unlock logic - fix an error code in spi_nor_read_raw() - fix a memory leak bug - enable the debugfs for the partname and partid - add support for few flashes SPI NOR controller drivers changes: - intel-spi: - Whitelist 4B read commands - Add support for Intel Tiger Lake SPI serial flash - aspeed-smc: Add of_node_put() - hisi-sfc: Add of_node_put() - cadence-quadspi: Fix QSPI RCU Schedule Stall
2019-09-15Merge tag 'nand/for-5.4' of ↵Richard Weinberger16-389/+645
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/for-5.4 NAND core * Fixing typos * Adding missing of_node_put() in various drivers Raw NAND controller drivers: * Macronix: new controller driver * Omap2: Fixing the number of bitflips returned * Brcmnand: Fix a pointer not iterating over all the page chunks * W90x900: Driver removed * Onenand: Fix a memory leak * Sharpsl: Missing include guard * STM32: Avoid warnings when building with W=1 * Ingenic: Fix a coccinelle warning * r852: Call a helper to simplify the code
2019-09-15ubi: block: Warn if volume size is not multiple of 512Richard Weinberger1-8/+35
If volume size is not a multiple of 512, ubi block cuts off the last bytes of an volume since the block layer works on 512 byte sectors. This can happen especially on NOR flash with minimal io size of 1. To avoid unpleasant surprises, print a warning. Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 06:25:31 +0000