summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2016-08-04Merge tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds8-75/+263
Pull UBI/UBIFS updates from Richard Weinberger: "This contains mostly cleanups and minor improvements of UBI and UBIFS" * tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifs: ubi: Use bitmaps in Fastmap self-check code ubi: Be more paranoid while seaching for the most recent Fastmap ubi: Check whether the Fastmap anchor matches the super block ubi: Rework Fastmap attach base code ubi: Fix whitespace issue in count_fastmap_pebs() ubi: Introduce vol_ignored() ubi: Fix scan_fast() comment ubifs: switch_gc_head: Remove redondant sync of wbuf ubi: Make volume resize power cut aware ubi: Fix early logging ubi: gluebi: Fix double refcounting ubifs: Silence early error messages if MS_SILENT is set ubi: Fix race condition between ubi device creation and udev ubifs: Update comment for ubifs_errc ubi: Only read necessary size when reading the VID header ubifs: Make xattr structures static ubifs: Silence error output if MS_SILENT is set
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada1-1/+1
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds31-246/+5540
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-07-30Merge tag 'powerpc-4.8-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - PowerNV PCI hotplug support. - Lots more Power9 support. - eBPF JIT support on ppc64le. - Lots of cxl updates. - Boot code consolidation. Bug fixes: - Fix spin_unlock_wait() from Boqun Feng - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao - mm: Ensure "special" zones are empty from Oliver O'Halloran - ftrace: Separate the heuristics for checking call sites from Michael Ellerman - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman - Fix endianness when reading TCEs from Alexey Kardashevskiy - start rtasd before PCI probing from Greg Kurz - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu Cleanups & fixes: - Drop support for MPIC in pseries from Rashmica Gupta - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman - Remove unused symbols in asm-offsets.c from Rashmica Gupta - Fix SRIOV not building without EEH enabled from Russell Currey - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh - Avoid -maltivec when using clang integrated assembler from Anton Blanchard - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes - export cpu_to_core_id() from Mauricio Faria de Oliveira - Remove old symbols from defconfigs from Andrew Donnellan - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao - Remove RELOCATABLE_PPC32 from Kevin Hao - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh Minor cleanups & fixes: - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman, Stephen Rothwell, Stewart Smith. Freescale updates from Scott: - "Highlights include more 8xx optimizations, device tree updates, and MVME7100 support." PowerNV PCI hotplug from Gavin Shan: - PCI: Add pcibios_setup_bridge() - Override pcibios_setup_bridge() - Remove PCI_RESET_DELAY_US - Move pnv_pci_ioda_setup_opal_tce_kill() around - Increase PE# capacity - Allocate PE# in reverse order - Create PEs in pcibios_setup_bridge() - Setup PE for root bus - Extend PCI bridge resources - Make pnv_ioda_deconfigure_pe() visible - Dynamically release PE - Update bridge windows on PCI plug - Delay populating pdn - Support PCI slot ID - Use PCI slot reset infrastructure - Introduce pnv_pci_get_slot_id() - Functions to get/set PCI slot state - PCI/hotplug: PowerPC PowerNV PCI hotplug driver - Print correct PHB type names Power9 idle support from Shreyas B. Prabhu: - set power_save func after the idle states are initialized - Use PNV_THREAD_WINKLE macro while requesting for winkle - make hypervisor state restore a function - Rename idle_power7.S to idle_book3s.S - Rename reusable idle functions to hardware agnostic names - Make pnv_powersave_common more generic - abstraction for saving SPRs before entering deep idle states - Add platform support for stop instruction - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES - cpuidle/powernv: cleanup cpuidle-powernv.c - cpuidle/powernv: Add support for POWER ISA v3 idle states - Use deepest stop state when cpu is offlined Power9 PMU from Madhavan Srinivasan: - factor out power8 pmu macros and defines - factor out power8 pmu functions - factor out power8 __init_pmu code - Add power9 event list macros for generic and cache events - Power9 PMU support - Export Power9 generic and cache events to sysfs Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt: - Add XICS emulation APIs - Move a few exception common handlers to make room - Add support for HV virtualization interrupts - Add mechanism to force a replay of interrupts - Add ICP OPAL backend - Discover IODA3 PHBs - pci: Remove obsolete SW invalidate - opal: Add real mode call wrappers - Rename TCE invalidation calls - Remove SWINV constants and obsolete TCE code - Rework accessing the TCE invalidate register - Fallback to OPAL for TCE invalidations - Use the device-tree to get available range of M64's - Check status of a PHB before using it - pci: Don't try to allocate resources that will be reassigned Other Power9: - Send SIGBUS on unaligned copy and paste from Chris Smart - Large Decrementer support from Oliver O'Halloran - Load Monitor Register Support from Jack Miller Performance improvements from Anton Blanchard: - Avoid load hit store in __giveup_fpu() and __giveup_altivec() - Avoid load hit store in setup_sigcontext() - Remove assembly versions of strcpy, strcat, strlen and strcmp - Align hot loops of some string functions eBPF JIT from Naveen N. Rao: - Fix/enhance 32-bit Load Immediate implementation - Optimize 64-bit Immediate loads - Introduce rotate immediate instructions - A few cleanups - Isolate classic BPF JIT specifics into a separate header - Implement JIT compiler for extended BPF Operator Panel driver from Suraj Jitindar Singh: - devicetree/bindings: Add binding for operator panel on FSP machines - Add inline function to get rc from an ASYNC_COMP opal_msg - Add driver for operator panel on FSP machines Sparse fixes from Daniel Axtens: - make some things static - Introduce asm-prototypes.h - Include headers containing prototypes - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE - kvm: Clarify __user annotations - Pass endianness to sparse - Make ppc_md.{halt, restart} __noreturn MM fixes & cleanups from Aneesh Kumar K.V: - radix: Update LPCR HR bit as per ISA - use _raw variant of page table accessors - Compile out radix related functions if RADIX_MMU is disabled - Clear top 16 bits of va only on older cpus - Print formation regarding the the MMU mode - hash: Update SDR1 size encoding as documented in ISA 3.0 - radix: Update PID switch sequence - radix: Update machine call back to support new HCALL. - radix: Add LPID based tlb flush helpers - radix: Add a kernel command line to disable radix - Cleanup LPCR defines Boot code consolidation from Benjamin Herrenschmidt: - Move epapr_paravirt_early_init() to early_init_devtree() - cell: Don't use flat device-tree after boot - ge_imp3a: Don't use the flat device-tree after boot - mpc85xx_ds: Don't use the flat device-tree after boot - mpc85xx_rdb: Don't use the flat device-tree after boot - Don't test for machine type in rtas_initialize() - Don't test for machine type in smp_setup_cpu_maps() - dt: Add of_device_compatible_match() - Factor do_feature_fixup calls - Move 64-bit feature fixup earlier - Move 64-bit memory reserves to setup_arch() - Use a cachable DART - Move FW feature probing out of pseries probe() - Put exception configuration in a common place - Remove early allocation of the SMU command buffer - Move MMU backend selection out of platform code - pasemi: Remove IOBMAP allocation from platform probe() - mm/hash: Don't use machine_is() early during boot - Don't test for machine type to detect HEA special case - pmac: Remove spurrious machine type test - Move hash table ops to a separate structure - Ensure that ppc_md is empty before probing for machine type - Move 64-bit probe_machine() to later in the boot process - Move 32-bit probe() machine to later in the boot process - Get rid of ppc_md.init_early() - Move the boot time info banner to a separate function - Move setting of {i,d}cache_bsize to initialize_cache_info() - Move the content of setup_system() to setup_arch() - Move cache info inits to a separate function - Re-order the call to smp_setup_cpu_maps() - Re-order setup_panic() - Make a few boot functions __init - Merge 32-bit and 64-bit setup_arch() Other new features: - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas - powerpc: Add module autoloading based on CPU features from Alastair D'Silva - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt - xmon: Dump ISA 2.06 SPRs from Michael Ellerman - xmon: Dump ISA 2.07 SPRs from Michael Ellerman - Add a parameter to disable 1TB segs from Oliver O'Halloran - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli - pseries: Add pseries hotplug workqueue from John Allen - pseries: Add support for hotplug interrupt source from John Allen - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen - pseries: Move property cloning into its own routine from Nathan Fontenot - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot - pseries: Auto-online hotplugged memory from Nathan Fontenot - pseries: Remove call to memblock_add() from Nathan Fontenot cxl: - Add set and get private data to context struct from Michael Neuling - make base more explicitly non-modular from Paul Gortmaker - Use for_each_compatible_node() macro from Wei Yongjun - Frederic Barrat - Abstract the differences between the PSL and XSL - Make vPHB device node match adapter's - Philippe Bergheaud - Add mechanism for delivering AFU driver specific events - Ignore CAPI adapters misplaced in switched slots - Refine slice error debug messages - Andrew Donnellan - static-ify variables to fix sparse warnings - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state - Add cxl_check_and_switch_mode() API to switch bi-modal cards - remove dead Kconfig options - fix potential NULL dereference in free_adapter() - Ian Munsie - Update process element after allocating interrupts - Add support for CAPP DMA mode - Fix allowing bogus AFU descriptors with 0 maximum processes - Fix allocating a minimum of 2 pages for the SPA - Fix bug where AFU disable operation had no effect - Workaround XSL bug that does not clear the RA bit after a reset - Fix NULL pointer dereference on kernel contexts with no AFU interrupts - powerpc/powernv: Split cxl code out into a separate file - Add cxl_slot_is_supported API - Enable bus mastering for devices using CAPP DMA mode - Move cxl_afu_get / cxl_afu_put to base - Allow a default context to be associated with an external pci_dev - Do not create vPHB if there are no AFU configuration records - powerpc/powernv: Add support for the cxl kernel api on the real phb - Add support for using the kernel API with a real PHB - Add kernel APIs to get & set the max irqs per context - Add preliminary workaround for CX4 interrupt limitation - Add support for interrupts on the Mellanox CX4 - Workaround PE=0 hardware limitation in Mellanox CX4 - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n selftests: - Test unaligned copy and paste from Chris Smart - Load Monitor Register Tests from Jack Miller - Cyril Bur - exec() with suspended transaction - Use signed long to read perf_event_paranoid - Fix usage message in context_switch - Fix generation of vector instructions/types in context_switch - Michael Ellerman - Use "Delta" rather than "Error" in normal output - Import Anton's mmap & futex micro benchmarks - Add a test for PROT_SAO" * tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits) powerpc/mm: Parenthesise IS_ENABLED() in if condition tty/hvc: Use opal irqchip interface if available tty/hvc: Use IRQF_SHARED for OPAL hvc consoles selftests/powerpc: exec() with suspended transaction powerpc: Improve comment explaining why we modify VRSAVE powerpc/mm: Drop unused externs for hpte_init_beat[_v3]() powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header powerpc/mm: Fix build break when PPC_NATIVE=n crypto: vmx - Convert to CPU feature based module autoloading powerpc: Add module autoloading based on CPU features powerpc/powernv/ioda: Fix endianness when reading TCEs powerpc/mm: Add memory barrier in __hugepte_alloc() powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call powerpc/ftrace: Separate the heuristics for checking call sites powerpc: Merge 32-bit and 64-bit setup_arch() powerpc/64: Make a few boot functions __init powerpc: Re-order setup_panic() powerpc: Re-order the call to smp_setup_cpu_maps() powerpc/32: Move cache info inits to a separate function powerpc/64: Move the content of setup_system() to setup_arch() ...
2016-07-29ubi: Use bitmaps in Fastmap self-check codeRichard Weinberger1-9/+11
...don't waste memory by allocating one sizeof(int) per PEB. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Be more paranoid while seaching for the most recent FastmapRichard Weinberger2-4/+27
Since PEB erasure is asynchornous it can happen that there is more than one Fastmap on the MTD. This is fine because the attach logic will pick the Fastmap data structure with the highest sequence number. On a not so well configured MTD stack spurious ECC errors are common. Causes can be different, bad hardware, wrong operating modes, etc... If the most current Fastmap renders bad due to ECC errors UBI might pick an older Fastmap to attach from. While this can only happen on an anyway broken setup it will show completely different sympthoms and makes finding the root cause much more difficult. So, be debug friendly and fall back to scanning mode of we're facing an ECC error while scanning for Fastmap. Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Check whether the Fastmap anchor matches the super blockRichard Weinberger1-0/+7
This helps to detect cases where an user copies an UBI image to another target with different bad blocks. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Rework Fastmap attach base codeRichard Weinberger4-42/+162
Introduce a new list to the UBI attach information object to be able to deal better with old and corrupted Fastmap eraseblocks. Also move more Fastmap specific code into fastmap.c. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Fix whitespace issue in count_fastmap_pebs()Richard Weinberger1-1/+1
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Introduce vol_ignored()Richard Weinberger2-6/+33
This makes the logic more easy to follow. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Fix scan_fast() commentRichard Weinberger1-1/+1
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Make volume resize power cut awareRichard Weinberger1-7/+18
When the volume resize operation shrinks a volume, LEBs will be unmapped. Since unmapping will not erase these LEBs immediately we have to wait for that operation to finish. Otherwise in case of a power cut right after writing the new volume table the UBI attach process can find more LEBs than the volume table knows. This will render the UBI image unattachable. Fix this issue by waiting for erase to complete and write the new volume table afterward. Cc: <stable@vger.kernel.org> Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Fix early loggingRichard Weinberger1-4/+4
We cannot use ubi_* logging functions before the UBI object is initialized. Cc: <stable@vger.kernel.org> Fixes: 3260870331 ("UBI: Extend UBI layer debug/messaging capabilities") Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: gluebi: Fix double refcountingRichard Weinberger1-5/+0
There is no need to call get/put on the module reference in gluebi_get/put_device() callbacks. Since mtd->owner is the gluebi module itself mtdcore.c will take care of proper refcounting in __get/put_mtd_device() before executing the callbacks. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Fix race condition between ubi device creation and udevIosif Harutyunov1-1/+4
Install the UBI device object before we arm sysfs. Otherwise udev tries to read sysfs attributes before UBI is ready and udev rules will not match. Cc: <stable@vger.kernel.org> Signed-off-by: Iosif Harutyunov <iharutyunov@sonicwall.com> [rw: massaged commit message] Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Only read necessary size when reading the VID headerSascha Hauer1-1/+1
When reading the vid hdr from the device UBI always reads a whole page. Instead, read only the data we actually need and speed up attachment of UBI devices by potentially making use of reading subpages if the NAND driver supports it. Since the VID header may be at offset vid_hdr_shift in the page and we can only read from the beginning of a page we have to add that offset to the read size. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+1
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-25Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2016-07-22 I'm sick so I have to keep this short, but here's the last pull request to net-next. This time there's a trivial conflict with mtd tree: http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au We concluded with Brian (CCed) that it's best that we ask Linus to fix this. The patches have been in linux-next for a couple of days. This time I haven't done any merge tests so I don't know if there are any other conflicts etc. Please let me know if there are any problems. wireless-drivers-next patches for 4.8 Major changes: wl18xx * add initial mesh support bcma * serial flash support on non-MIPS SoCs ath10k * enable support for QCA9888 * disable wake_tx_queue() mac80211 op for older devices to workaround throughput regression ath9k * implement temperature compensation support for AR9003+ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19mtd: spi-nor: don't build Cadence QuadSPI on non-ARMBrian Norris1-1/+1
This controller driver is used only on ARM but is mostly written portably so it can build on other arch'es. Unfortunately, at least x86 doesn't provibe readsl()/writesl() accessors. We could possibly fix this issue in the future by using io{read,write}32_rep() instead, but let's just drop the architectures we aren't using for now. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-19mtd: mtk-nor: remove duplicated include from mtk-quadspi.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-19mtd: nand: fix bug writing 1 byte less than page sizeHector Palacios1-1/+1
nand_do_write_ops() determines if it is writing a partial page with the formula: part_pagewr = (column || writelen < (mtd->writesize - 1)) When 'writelen' is exactly 1 byte less than the NAND page size the formula equates to zero, so the code doesn't process it as a partial write, although it should. As a consequence the function remains in the while(1) loop with 'writelen' becoming 0xffffffff and iterating endlessly. The bug may not be easy to reproduce in Linux since user space tools usually force the padding or round-up the write size to a page-size multiple. This was discovered in U-Boot where the issue can be reproduced by writing any size that is 1 byte less than a page-size multiple. For example, on a NAND with 2K page (0x800): => nand erase.part <partition> => nand write $loadaddr <partition> 7ff [Editor's note: the bug was added in commit 29072b96078f, but moved around in commit 66507c7bc8895 ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer")] Fixes: 29072b96078f ("[MTD] NAND: add subpage write support") Signed-off-by: Hector Palacios <hector.palacios@digi.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-19mtd: add arch dependency for MTD_BCM47XXSFLASH symbolRafał Miłecki1-1/+1
We dropped strict MIPS dependency for bcm47xxsflash driver in: commit 5651d6aaf489 ("mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()") but using ioremap_cache still limits building it to few selected architectures only. A recent commit 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") automatically dropped MIPS dependency for MTD_BCM47XXSFLASH which broke building e.g. on powerpc and cris. The bcma change is alright as it doesn't break building bcma code in any way. MTD_BCM47XXSFLASH on the other hand should be limited to archs which need it and can build it (by providing ioremap_cache). Fixes: 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mtd: update description of MTD_BCM47XXSFLASH symbolRafał Miłecki1-2/+2
For years now we support writing to BCMA SoC serial flash, so don't describe this driver as providing read-only support anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-18mtd: spi-nor: Add driver for Cadence Quad SPI Flash ControllerGraham Moore3-0/+1311
Add support for the Cadence QSPI controller. This controller is present in the Altera SoCFPGA SoCs and this driver has been tested on the Cyclone V SoC. Signed-off-by: Graham Moore <grmoore@opensource.altera.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alan Tull <atull@opensource.altera.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Graham Moore <grmoore@opensource.altera.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Yves Vandervennet <yvanderv@opensource.altera.com> Cc: devicetree@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-16mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmdFlorian Fainelli1-1/+1
Change the BUG_ON() condition in brcmnand_send_cmd() which checks for the interrupt status "controller ready" bit to a WARN_ON. There is no good reason to kill the system when this condition occur because we could have systems which listed the NAND controller as available (e.g: from Device Tree), but the NAND chip could be malfunctioning and not responding. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-15mtd: pmcmsp-flash: Allocating too much in init_msp_flash()Dan Carpenter1-3/+3
There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa87f6d ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-15mtd: maps: sa1100-flash: potential NULL dereferenceDan Carpenter1-1/+3
We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755cf36 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-16Merge tag 'for-linus-20160715' of git://git.infradead.org/linux-mtdLinus Torvalds1-2/+5
Pull MTD fix from Brian Norris: "Late MTD fix for v4.7: One regression in the Device Tree handling for OMAP NAND handling of the ELM node. TI migrated to using the property name "ti,elm-id", but forgot to keep compatibility with the old "elm_id" property. Also, might as well send out this MAINTAINERS fixup now" * tag 'for-linus-20160715' of git://git.infradead.org/linux-mtd: mtd: nand: omap2: Add check for old elm binding MAINTAINERS: Add file patterns for mtd device tree bindings
2016-07-15mtd: atmel-quadspi: add driver for Atmel QSPI controllerCyrille Pitchen3-0/+742
This driver add support to the new Atmel QSPI controller embedded into sama5d2x SoCs. It expects a NOR memory to be connected to the QSPI controller. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-15mtd: nand: omap2: fix return value check in omap_nand_probe()Wei Yongjun1-2/+2
In case of error, the function dma_request_chan() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: aa7abd312c11 ('mtd: nand: omap2: Support parsing dma channel information from DT') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-15Merge tag 'nand/for-4.8' of github.com:linux-nand/linux into mtdBrian Norris13-122/+2806
Pull NAND changes from Boris Brezillon: """ This pull request contains only one notable change: * Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: * A few fixes/improvements for the xway NAND controller driver * A few fixes for the sunxi NAND controller driver * Support for DMA in the sunxi NAND driver * Support for the sunxi NAND controller IP embedded in A23/A33 SoCs * Addition for bitflips detection in erased pages to the brcmnand driver * Support for new brcmnand IPs * Update of the OMAP-GPMC binding to support DMA channel description """
2016-07-14mtd: nand: omap2: Add check for old elm bindingTeresa Remmet1-2/+5
commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") removes the check for the old elm phandle binding. Add it again to keep backward compatibility. Fixes: commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-13mtd: spi-nor: add hisilicon spi-nor flash controller driverJiancheng Xue3-0/+497
Add hisilicon spi-nor flash controller driver Signed-off-by: Binquan Peng <pengbinquan@hisilicon.com> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-13mtd: spi-nor: support dual, quad, and WP for GigadeviceBrian Norris1-4/+20
Gigadevice flash support BP{0,1,2,3,4} bits, where BP3 means the same as the existing supported TB (Top/Bottom), and BP4 means the same as the not-yet-supported 4K bit used on other flash (e.g., Winbond). Let's support lock/unlock with the same feature flags as w25q32dw/w25q64dw. Tested on gd25lq64c, but I checked datasheets for the other 3, to make sure. While I was at it, I noticed that these all support dual and quad as well. I noted them, but can't test them at the moment, since my test system only supports standard 1x SPI. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-13mtd: spi-nor: Added support for n25q00a.P L Sai Krishna1-0/+1
Add Micron (n25q00a) 1Gbit NOR Flash in the list of supported devices. This part is different from n25q00 in Memory Type. Memory Type for n25q00 - BAh Memory Type for n25q00a - BBh Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-13memory: Update dependency of IFC for LayerscapeRaghav Dogra1-1/+1
This patch enables IFC NAND support on ARM layerscape platform. It fixes the dependency to enable NAND. The include files are being modified to ensure complilation for both PowerPC and ARM architectures. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-11mtd: nand: jz4780: Update MODULE_AUTHOR email addressHarvey Hunt2-2/+2
Emails will bounce from my imgtec address, so update it to a new one. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Harvey Hunt <harveyhuntnexus@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: sunxi: prevent a small memory leakDan Carpenter1-3/+3
I moved the sanity check on ecc->size before the allocation so that we don't leak memory on error. Fixes: 05af074a4b73 ('mtd: nand: sunxi: check ecc->size values') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: sunxi: add reset line supportIcenowy Zheng1-2/+23
The NAND controller on some sun8i chips needs its reset line to be deasserted before they can enter working state. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: add nandaddr to own structHauke Mehrtens1-16/+14
Instead of using IO_ADDR_W and IO_ADDR_R use an own pointer to the NAND controller memory area. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: add missing write_buf and read_buf to nand driverHauke Mehrtens1-0/+18
This driver needs a special write_buf and read_buf function, because we have to read from a specific address to tell the controller this is a read from the nand controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: extract read and write functionHauke Mehrtens1-9/+19
Extract the functions to read and write to the register of the NAND flash controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: fix nand lockingJohn Crispin1-12/+8
The external Bus Unit (EBU) can control different flash devices, but these NAND flash commands have to be atomic and should not be interrupted in between. Lock the EBU from the beginning of the command till the end by moving the lock to the chip select. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: remove manual resetHauke Mehrtens1-20/+0
nand_scan() already resets the NAND flash chip, this driver does not have to call it manually. The xway_reset_chip() functions does the same as the normal NAND reset function. The waiting for the NAND_WAIT_WR_C is done in xway_cmd_ctrl(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: Avoid messing up with IO_ADDR_W in ->cmd_ctrl()John Crispin1-15/+11
The ->cmd_ctrl() function is adjusting the ->IO_ADDR_W value depending on the command type each time NAND_CTRL_CHANGE is passed. This is not only useless but can lead to an ->IO_ADDR_W corruption. Get rid of this logic and rely on the NAND_CLE and NAND_ALE flags to deduce the iomem address to write the cmd argument to. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: convert to normal platform driverHauke Mehrtens2-37/+80
Instead of hacking this into the plat_nand driver just make this a normal nand driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nand: xway: add some more documentationHauke Mehrtens1-6/+15
This adds some register documentation which should make it easier to understand how this controller works. In addition it makes now use of BIT() macro and adds some more defines. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-11mtd: nandbiterrs: Support for NAND biterrors test on platforms without raw writeIwo Mergler1-1/+1
Support for NAND biterrors test on platforms without raw write While the default test mode relies on raw write (mtd_write_oob) to introduce bit errors into a page, the rewrite test mode doesn't need it. Changed the overwrite test to use normal writes. The default test mode is unaffected and still requires raw write as before. Signed-off-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>