summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2018-08-23Merge tag 'upstream-4.19-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds6-11/+47
Pull UBI/UBIFS updates from Richard Weinberger: - Year 2038 preparations - New UBI feature to skip CRC checks of static volumes - A new Kconfig option to disable xattrs in UBIFS - Lots of fixes in UBIFS, found by our new test framework * tag 'upstream-4.19-rc1' of git://git.infradead.org/linux-ubifs: (21 commits) ubifs: Set default assert action to read-only ubifs: Allow setting assert action as mount parameter ubifs: Rework ubifs_assert() ubifs: Pass struct ubifs_info to ubifs_assert() ubifs: Turn two ubifs_assert() into a WARN_ON() ubi: expose the volume CRC check skip flag ubi: provide a way to skip CRC checks ubifs: Use kmalloc_array() ubifs: Check data node size before truncate Revert "UBIFS: Fix potential integer overflow in allocation" ubifs: Add comment on c->commit_sem ubifs: introduce Kconfig symbol for xattr support ubifs: use swap macro in swap_dirty_idx ubifs: tnc: use monotonic znode timestamp ubifs: use timespec64 for inode timestamps ubifs: xattr: Don't operate on deleted inodes ubifs: gc: Fix typo ubifs: Fix memory leak in lprobs self-check ubi: Initialize Fastmap checkmapping correctly ubifs: Fix synced_i_size calculation for xattr inodes ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-15ubi: expose the volume CRC check skip flagQuentin Schulz2-0/+14
Now that we have the logic for skipping CRC check for static UBI volumes in the core, let's expose it to users. This makes use of a padding byte in the volume description data structure as a flag. This flag only tell for now whether we should skip the CRC check of a volume. This checks the UBI volume for which we are trying to skip the CRC check is static. Let's also make sure that the flags passed to verify_mkvol_req are valid. We voluntarily do not take into account the skip_check flag in vol_cdev_write() as we want to make sure what we wrote was correctly written. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: provide a way to skip CRC checksQuentin Schulz5-1/+23
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: Initialize Fastmap checkmapping correctlyRichard Weinberger1-10/+10
We cannot do it last, otherwithse it will be skipped for dynamic volumes. Reported-by: Lachmann, Juergen <juergen.lachmann@harman.com> Fixes: 34653fd8c46e ("ubi: fastmap: Check each mapping only once") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-14Merge tag 'sound-4.19-rc1' of ↵Linus Torvalds1-16/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types" * tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits) ASoC: adav80x: mark expected switch fall-through ASoC: da7219: Add delays to capture path to remove DC offset noise ALSA: usb-audio: Mark expected switch fall-through ALSA: mixart: Mark expected switch fall-through ALSA: opl3: Mark expected switch fall-through ALSA: hda/ca0132 - Add exit commands for Recon3D ALSA: hda/ca0132 - Change mixer controls for Recon3D ALSA: hda/ca0132 - Add Recon3D input and output select commands ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D ALSA: hda/ca0132 - Add Recon3D startup functions and setup ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio ALSA: hda/ca0132 - Add Recon3D pincfg ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D ALSA: hda/ca0132 - Add alt_functions unsolicited response ALSA: hda/ca0132 - Clean up ca0132_init function. ALSA: hda/ca0132 - Create mmio gpio function to make code clearer ASoC: wm_adsp: Make DSP name configurable by codec driver ASoC: wm_adsp: Declare firmware controls from codec driver ASoC: max98373: Added software reset register to readable registers ASoC: wm_adsp: Correct DSP pointer for preloader control ...
2018-08-14Merge tag 'spi-v4.19' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite an active release for the SPI subsystem, lots of small updates and fixes scattered about with highlights including: - 3-wire support in the GPIO driver. - support for setting a custom memory name in the memory mapped flash drivers. - support for extended mode in the Freescale DSPI controller. - support for the non-standard integration with the Microsemi Ocelot platform in the DesignWare driver. - new driver for the SocioNext UniPhier" * tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits) spi: davinci: fix a NULL pointer dereference spi: spi-mem: Constify spi_mem->name mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name spi: spi-mem: Extend the SPI mem interface to set a custom memory name spi: spi-mem: Fix a typo in the documentation of struct spi_mem spi: uniphier: remove unnecessary include headers spi: spi-gpio: add SPI_3WIRE support spi: add flags parameter to txrx_word function pointers spi: add SPI controller driver for UniPhier SoC spi: add DT bindings for UniPhier SPI controller spi: dw: document Microsemi integration spi: img-spfi: Set device select bits for SPFI port state spi: omap2-mcspi: remove several redundant variables spi: dw-mmio: add MSCC Ocelot support spi: dw: export dw_spi_set_cs spi: spi-fsl-espi: Log fifo counters on error spi: imx: Use the longuest possible burst size when in dynamic_burst spi: imx: remove unnecessary check in spi_imx_can_dma spi: imx: Use correct number of bytes per words spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32 ...
2018-08-14Merge tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtdLinus Torvalds88-2074/+5690
Pull mtd updates from Boris Brezillon: "JFFS2 changes: - Support 64-bit timestamps MTD core changes: - Support sub-partitions - Clarify mtd_oob_ops documentation - Make Kconfig formatting consistent - Fix potential overflows in mtdchar_{write,read}() - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing and no OOB data were requested - Remove VLA usage in the bch lib MTD driver changes: - Use mtd_device_register() instead of mtd_device_parse_register() where applicable - Use proper printk format to print physical addresses in the solutionengine driver - Add missing mtd_set_of_node() call in the powernv driver - Remove unneeded variables in a few drivers - Plug the TRX part parser to the DT partition parsers logic - Check ioremap_cache() return code in the gpio-addr-flash driver - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c SPI NOR core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT SPI NOR driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op()" * tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits) mtd: rawnand: atmel: Select GENERIC_ALLOCATOR MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support mtd: rawnand: allocate dynamically ONFI parameters during detection mtd: spi-nor: only apply reset hacks to broken hardware mtd: spi-nor: cadence-quadspi: fix timeout handling mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h mtd: spi-nor: intel-spi: use mtd_device_register() mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK" mtd: spi-nor: atmel-quadspi: add suspend/resume hooks mtd: rawnand: allocate model parameter dynamically mtd: rawnand: do not export nand_scan_[ident|tail]() anymore mtd: rawnand: txx9ndfmc: convert driver to nand_scan() mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation mtd: rawnand: tegra: convert driver to nand_scan() mtd: rawnand: jz4740: convert driver to nand_scan() mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls mtd: rawnand: jz4740: fix probe function error path mtd: rawnand: docg4: convert driver to nand_scan() mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero mtd: rawnand: atmel: convert driver to nand_scan() ...
2018-08-11mtd: rawnand: atmel: Select GENERIC_ALLOCATORBoris Brezillon1-0/+1
The driver uses genalloc functions. Select GENERIC_ALLOCATOR to prevent build errors when selected through COMPILE_TEST. Fixes: 88a40e7dca00 ("mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Randy Dunlap <rdunlap@infradead.org>
2018-08-11Merge tag 'spi-nor/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon7-23/+52
Pull SPI NOR updates from Boris Brezillon: " Core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT Driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver "
2018-08-11Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon63-1989/+5591
Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "
2018-08-10Merge branch 'spi-4.19' into spi-nextMark Brown1-0/+3
2018-08-09Merge branch 'asoc-4.19' into asoc-nextMark Brown1-16/+1
2018-08-02mtd: m25p80: Call spi_mem_get_name() to let controller set a custom nameFrieder Schrempf1-0/+3
By calling spi_mem_get_name(), the driver of the (Q)SPI controller can set a custom name for the memory device if necessary. This is useful to keep mtdparts compatible when controller drivers are ported from the MTD to the SPI layer. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01mtd: rawnand: allocate dynamically ONFI parameters during detectionMiquel Raynal3-29/+44
Now that it is possible to do dynamic allocations during the identification phase, convert the onfi_params structure (which is only needed with ONFI compliant chips) into a pointer that will be allocated only if needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: only apply reset hacks to broken hardwareBrian Norris1-2/+16
Commit 59b356ffd0b0 ("mtd: m25p80: restore the status of SPI flash when exiting") is the latest from a long history of attempts to add reboot handling to handle stateful addressing modes on SPI flash. Some prior mostly-related discussions: http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html [PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands http://lists.infradead.org/pipermail/barebox/2014-September/020682.html [RFC] MTD m25p80 3-byte addressing and boot problem http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html [PATCH 2/2] m25p80: if supported put chip to deep power down if not used Previously, attempts to add reboot-time software reset handling were rejected, but the latest attempt was not. Quick summary of the problem: Some systems (e.g., boot ROM or bootloader) assume that they can read initial boot code from their SPI flash using 3-byte addressing. If the flash is left in 4-byte mode after reset, these systems won't boot. The above patch provided a shutdown/remove hook to attempt to reset the addressing mode before we reboot. Notably, this patch misses out on huge classes of unexpected reboots (e.g., crashes, watchdog resets). Unfortunately, it is essentially impossible to solve this problem 100%: if your system doesn't know how to reset the SPI flash to power-on defaults at initialization time, no amount of software can really rescue you -- there will always be a chance of some unexpected reset that leaves your flash in an addressing mode that your boot sequence didn't expect. While it is not directly harmful to perform hacks like the aforementioned commit on all 4-byte addressing flash, a properly-designed system should not need the hack -- and in fact, providing this hack may mask the fact that a given system is indeed broken. So this patch attempts to apply this unsound hack more narrowly, providing a strong suggestion to developers and system designers that this is truly a hack. With luck, system designers can catch their errors early on in their development cycle, rather than applying this hack long term. But apparently enough systems are out in the wild that we still have to provide this hack. Document a new device tree property to denote systems that do not have a proper hardware (or software) reset mechanism, and apply the hack (with a loud warning) only in this case. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: cadence-quadspi: fix timeout handlingNicholas Mc Guire1-12/+8
wait_for_completion_timeout returns an unsigned long not an int, so let's check its return value directly instead of storing it in ret, and avoid checking for negative values since this cannot happen. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.hBoris Brezillon1-1/+1
GPIO consumers now include <linux/gpio/consumer.h> instead of <linux/gpio.h> if they can. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: intel-spi: use mtd_device_register()Rafał Miłecki1-1/+1
This driver doesn't specify parsers so it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"Benjamin Gaignard1-3/+3
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: atmel-quadspi: add suspend/resume hooksClaudiu Beznea1-0/+21
Implement suspend/resume hooks. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: allocate model parameter dynamicallyMiquel Raynal1-11/+41
Thanks to the migration of all drivers to use nand_scan() and the related nand_controller_ops, we can now allocate data during the detection phase. Let's do it first for the NAND model parameter which is allocated in nand_detect(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: do not export nand_scan_[ident|tail]() anymoreMiquel Raynal1-7/+9
Both nand_scan_ident() and nand_scan_tail() helpers used to be called directly from controller drivers that needed to tweak some ECC-related parameters before nand_scan_tail(). This separation prevented dynamic allocations during the phase of NAND identification, which was inconvenient. All controller drivers have been moved to use nand_scan(), in conjunction with the chip->ecc.[attach|detach]_chip() hooks that actually do the required tweaking sequence between both ident/tail calls, allowing programmers to use dynamic allocation as they need all across the scanning sequence. Declare nand_scan_[ident|tail]() statically now. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: txx9ndfmc: convert driver to nand_scan()Miquel Raynal1-17/+17
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: txx9ndfmc: clarify ECC parameters assignationMiquel Raynal1-4/+4
A comment in the probe declares that values are assigned to ecc.size and ecc.bytes, but these values will be overwritten. This is not entirely right as they are overwritten only if mtd->writesize >= 512. Let's clarify this by moving these assignations to txx9ndfmc_nand_scan(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: tegra: convert driver to nand_scan()Miquel Raynal1-74/+88
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: jz4740: convert driver to nand_scan()Miquel Raynal1-12/+20
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: jz4740: group nand_scan_{ident, tail} callsMiquel Raynal1-12/+11
Prepare the migration to nand_scan() by moving both calls to nand_scan_ident() and nand_scan_tail() in a single spot. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: jz4740: fix probe function error pathMiquel Raynal1-3/+3
An error after nand_scan_tail() should trigger a nand_cleanup(), not a nand_release() as mtd_device_register() (or one of its variants) has not been called and there is no need to deregister any MTD device yet. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: docg4: convert driver to nand_scan()Miquel Raynal1-26/+45
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: do not execute nand_scan_ident() if maxchips is zeroMiquel Raynal1-4/+8
Some driver (eg. docg4) will need to handle themselves the identification phase. As part of the migration to use nand_scan() everywhere (which will unconditionnaly call nand_scan_ident()), we add a condition at the start of nand_scan_with_ids() to jump over nand_scan_ident() if the maxchips parameters is zero, meaning that the driver does not want the core to handle this phase. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: atmel: convert driver to nand_scan()Miquel Raynal1-59/+54
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: atmel: clarify NAND addition/removal pathsMiquel Raynal1-57/+45
No need for an atmel_nand_register() function, let's move the code in it directly where the function was called: in atmel_nand_controller_add_nand(). To make things consistent, also rename atmel_nand_unregister() into atmel_nand_controller_remove_nand(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: omap2: convert driver to nand_scan()Miquel Raynal1-233/+230
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()Miquel Raynal1-28/+33
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: cafe: convert driver to nand_scan()Miquel Raynal1-57/+78
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: brcmnand: convert driver to nand_scan()Miquel Raynal1-27/+36
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: qcom: convert driver to nand_scan()Miquel Raynal1-47/+24
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()Miquel Raynal1-13/+20
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan_with_ids() (alternative to nand_scan() for passing a flash IDs table) instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: sm_common: fix the probe function error pathMiquel Raynal1-1/+5
nand_cleanup() should be called upon error after a successful nand_scan_tail(). Rework the error path to follow this rule . Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: vf610: convert driver to nand_scan()Miquel Raynal1-61/+66
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Stefan Agner <stefan@agner.ch>
2018-07-31mtd: rawnand: txx9ndfmc: rename nand controller internal structureMiquel Raynal1-3/+3
As already done in the core, calling a struct nand_controller 'hw_control' is misleading. Use the same name as in nand_base.c: 'controller'. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: tango: convert driver to nand_scan()Miquel Raynal1-16/+24
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: sunxi: convert driver to nand_scan()Miquel Raynal1-24/+19
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: sh_flctl: convert driver to nand_scan()Miquel Raynal1-21/+15
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: s3c2410: convert driver to nand_scan()Miquel Raynal1-17/+13
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: nandsim: convert driver to nand_scan()Miquel Raynal1-37/+45
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: mxc: convert driver to nand_scan()Miquel Raynal1-65/+71
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: mtk: convert driver to nand_scan()Miquel Raynal1-31/+44
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Xiaolei Li <xiaolei.li@mediatek.com>
2018-07-31mtd: rawnand: marvell: convert driver to nand_scan()Miquel Raynal1-97/+108
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>