summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2016-11-05Merge tag 'for-linus-20161104' of git://git.infradead.org/linux-mtdLinus Torvalds3-30/+55
Pull MTD fixes from Brian Norris: - MAINTAINERS updates to reflect some new maintainers/submaintainers. We have some great volunteers who've been developing and reviewing already. We're going to try a group maintainership model, so eventually you'll probably see pull requests from people besides me. - NAND fixes from Boris: "Three simple fixes: - fix a non-critical bug in the gpmi driver - fix a bug in the 'automatic NAND timings selection' feature introduced in 4.9-rc1 - fix a false positive uninitialized-var warning" * tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd: mtd: mtk: avoid warning in mtk_ecc_encode mtd: nand: Fix data interface configuration logic mtd: nand: gpmi: disable the clocks on errors MAINTAINERS: add more people to the MTD maintainer team MAINTAINERS: add a maintainer for the SPI NOR subsystem
2016-10-28ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()Boris Brezillon1-5/+5
Commit e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists") introduced a bug by changing the possible error codes returned by add_vol(): - this function no longer returns NULL in case of allocation failure but return ERR_PTR(-ENOMEM) - when a duplicate entry in the volume RB tree is found it returns ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL) Fix the tests done on add_vol() return val to match this new behavior. Fixes: e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-28mtd: mtk: avoid warning in mtk_ecc_encodeArnd Bergmann1-10/+9
When building with -Wmaybe-uninitialized, gcc produces a silly false positive warning for the mtk_ecc_encode function: drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode': drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] The function for some reason contains a double byte swap on big-endian builds to get the OOB data into the correct order again, and is written in a slightly confusing way. Using a simple memcpy32_fromio() to read the data simplifies it a lot so it becomes more readable and produces no warning. However, the output might not have 32-bit alignment, so we have to use another memcpy to avoid taking alignment faults or writing beyond the end of the array. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: RogerCC Lin <rogercc.lin@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-28mtd: nand: Fix data interface configuration logicBoris Brezillon1-18/+42
When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
2016-10-28mtd: nand: gpmi: disable the clocks on errorsFabio Estevam1-2/+4
We should disable the previously enabled GPMI clocks in the error paths. Also, when gpmi_enable_clk() fails simply return the error code immediately rather than jumping to to the 'err_out' label. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-20UBI: Fix crash in try_recover_peb()Geert Uytterhoeven1-0/+1
drivers/mtd/ubi/eba.c: In function ‘try_recover_peb’: drivers/mtd/ubi/eba.c:744: warning: ‘vid_hdr’ is used uninitialized in this function The pointer vid_hdr is indeed not initialized, leading to a crash when it is dereferenced. Fix this by obtaining the pointer from the VID buffer, like is done everywhere else. Fixes: 3291b52f9ff0acc8 ("UBI: introduce the VID buffer concept") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-20ubi: fix swapped arguments to call to ubi_alloc_aebColin Ian King1-1/+1
Static analysis by CoverityScan detected the ec and pnum arguments are in the wrong order on a call to ubi_alloc_aeb. Swap the order to fix this. Fixes: 91f4285fe389a27 ("UBI: provide helpers to allocate and free aeb elements") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+0
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada2-2/+0
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11Merge tag 'upstream-4.9-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds12-585/+889
Pull UBI/UBIFS updates from Richard Weinberger: "This pull request contains: - Fixes for both UBI and UBIFS - overlayfs support (O_TMPFILE, RENAME_WHITEOUT/EXCHANGE) - Code refactoring for the upcoming MLC support" [ Ugh, we just got rid of the "rename2()" naming for the extended rename functionality. And this re-introduces it in ubifs with the cross- renaming and whiteout support. But rather than do any re-organizations in the merge itself, the naming can be cleaned up later ] * tag 'upstream-4.9-rc1' of git://git.infradead.org/linux-ubifs: (27 commits) UBIFS: improve function-level documentation ubifs: fix host xattr_len when changing xattr ubifs: Use move variable in ubifs_rename() ubifs: Implement RENAME_EXCHANGE ubifs: Implement RENAME_WHITEOUT ubifs: Implement O_TMPFILE ubi: Fix Fastmap's update_vol() ubi: Fix races around ubi_refill_pools() ubi: Deal with interrupted erasures in WL UBI: introduce the VID buffer concept UBI: hide EBA internals UBI: provide an helper to query LEB information UBI: provide an helper to check whether a LEB is mapped or not UBI: add an helper to check lnum validity UBI: simplify LEB write and atomic LEB change code UBI: simplify recover_peb() code UBI: move the global ech and vidh variables into struct ubi_attach_info UBI: provide helpers to allocate and free aeb elements UBI: fastmap: use ubi_io_{read, write}_data() instead of ubi_io_{read, write}() UBI: fastmap: use ubi_rb_for_each_entry() in unmap_peb() ...
2016-10-10Merge tag 'for-linus-20161008' of git://git.infradead.org/linux-mtdLinus Torvalds23-386/+976
Pull MTD updates from Brian Norris: "I've not been very active this cycle, so these are mostly from Boris, for the NAND flash subsystem. NAND: - Add the infrastructure to automate NAND timings configuration - Provide a generic DT property to maximize ECC strength - Some refactoring in the core bad block table handling, to help with improving some of the logic in error cases. - Minor cleanups and fixes MTD: - Add APIs for handling page pairing; this is necessary for reliably supporting MLC and TLC NAND flash, where paired-page disturbance affects reliability. Upper layers (e.g., UBI) should make use of these in the near future" * tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits) mtd: nand: fix trivial spelling error mtdpart: Propagate _get/put_device() mtd: nand: Provide nand_cleanup() function to free NAND related resources mtd: Kill the OF_MTD Kconfig option mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD mtd: nand: Fix nand_command_lp() for 8bits opcodes mtd: nand: sunxi: Support ECC maximization mtd: nand: Support maximizing ECC when using software BCH mtd: nand: Add an option to maximize the ECC strength mtd: nand: mxc: Add timing setup for v2 controllers mtd: nand: mxc: implement onfi get/set features mtd: nand: sunxi: switch from manual to automated timing config mtd: nand: automate NAND timings selection mtd: nand: Expose data interface for ONFI mode 0 mtd: nand: Add function to convert ONFI mode to data_interface mtd: nand: convert ONFI mode into data interface mtd: nand: Introduce nand_data_interface mtd: nand: Create a NAND reset function mtd: nand: remove unnecessary 'extern' from function declarations MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver ...
2016-10-09Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull blk-mq irq/cpu mapping updates from Jens Axboe: "This is the block-irq topic branch for 4.9-rc. It's mostly from Christoph, and it allows drivers to specify their own mappings, and more importantly, to share the blk-mq mappings with the IRQ affinity mappings. It's a good step towards making this work better out of the box" * 'for-4.9/block-irq' of git://git.kernel.dk/linux-block: blk_mq: linux/blk-mq.h does not include all the headers it depends on blk-mq: kill unused blk_mq_create_mq_map() blk-mq: get rid of the cpumask in struct blk_mq_tags nvme: remove the post_scan callout nvme: switch to use pci_alloc_irq_vectors blk-mq: provide a default queue mapping for PCI device blk-mq: allow the driver to pass in a queue mapping blk-mq: remove ->map_queue blk-mq: only allocate a single mq_map per tag_set blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-10-08Merge tag '4.9/mtd-pairing-scheme' of github.com:linux-nand/linuxBrian Norris2-0/+105
Introduction of the MTD pairing scheme concept.
2016-10-07Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
2016-10-03mtd: nand: fix trivial spelling errorBrian Norris1-1/+1
Introduced by commit fde85cfd2d07 ("mtd: nand: Fix nand_command_lp() for 8bits opcodes") and I didn't have the heart to have Boris rewrite his pull request just for that. Anyway, there's some value in having stable commit hashes. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-10-03Merge tag 'for-4.9' of github.com:linux-nand/linuxBrian Norris21-386/+853
" Notable core changes: - add the infrastructure to automate NAND timings configuration - provide a generic DT property to maximize ECC strength The rest is just a bunch of minor drivers and core fixes/cleanup patches. " Also not noted: some refactoring in the core bad block table handling, to help with improving some of the logic in error cases. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-10-02ubi: Fix Fastmap's update_vol()Richard Weinberger1-0/+1
Usually Fastmap is free to consider every PEB in one of the pools as newer than the existing PEB. Since PEBs in a pool are by definition newer than everything else. But update_vol() missed the case that a pool can contain more than one candidate. Cc: <stable@vger.kernel.org> Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02ubi: Fix races around ubi_refill_pools()Richard Weinberger4-14/+30
When writing a new Fastmap the first thing that happens is refilling the pools in memory. At this stage it is possible that new PEBs from the new pools get already claimed and written with data. If this happens before the new Fastmap data structure hits the flash and we face power cut the freshly written PEB will not scanned and unnoticed. Solve the issue by locking the pools until Fastmap is written. Cc: <stable@vger.kernel.org> Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02ubi: Deal with interrupted erasures in WLRichard Weinberger1-2/+19
When Fastmap is used we can face here an -EBADMSG since Fastmap cannot know about unmaps. If the erasure was interrupted the PEB may show ECC errors and UBI would go to ro-mode as it assumes that the PEB was check during attach time, which is not the case with Fastmap. Cc: <stable@vger.kernel.org> Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: introduce the VID buffer conceptBoris Brezillon7-142/+218
Currently, all VID headers are allocated and freed using the ubi_zalloc_vid_hdr() and ubi_free_vid_hdr() function. These functions make sure to align allocation on ubi->vid_hdr_alsize and adjust the vid_hdr pointer to match the ubi->vid_hdr_shift requirements. This works fine, but is a bit convoluted. Moreover, the future introduction of LEB consolidation (needed to support MLC/TLC NANDs) will allows a VID buffer to contain more than one VID header. Hence the creation of a ubi_vid_io_buf struct to attach extra information to the VID header. We currently only store the actual pointer of the underlying buffer, but will soon add the number of VID headers contained in the buffer. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: hide EBA internalsBoris Brezillon4-51/+165
Create a private ubi_eba_table struct to hide EBA internals and provide helpers to allocate, destroy, copy and assing an EBA table to a volume. Now that external EBA users are using helpers to query/modify the EBA state we can safely change the internal representation, which will be needed to support the LEB consolidation concept. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: provide an helper to query LEB informationBoris Brezillon3-2/+40
This is part of our attempt to hide EBA internals from other part of the implementation in order to easily adapt it to the MLC needs. Here we are creating an ubi_eba_leb_desc struct to hide the way we keep track of the LEB to PEB mapping. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: provide an helper to check whether a LEB is mapped or notBoris Brezillon3-2/+15
This is part of the process of hiding UBI EBA's internal to other part of the UBI implementation, so that we can add new information to the EBA table without having to patch different places in the UBI code. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: add an helper to check lnum validityBoris Brezillon3-8/+13
ubi_leb_valid() is here to replace the lnum < 0 || lnum >= vol->reserved_pebs checks. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: simplify LEB write and atomic LEB change codeBoris Brezillon1-170/+115
ubi_eba_write_leb(), ubi_eba_write_leb_st() and ubi_eba_atomic_leb_change() are using a convoluted retry/exit path. Add the try_write_vid_and_data() function to simplify the retry logic and make sure we have a single exit path instead of manually releasing the resources in each error path. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: simplify recover_peb() codeBoris Brezillon1-53/+77
recover_peb() is using a convoluted retry/exit path. Add try_recover_peb() to simplify the retry logic and make sure we have a single exit path instead of manually releasing the resource in each error path. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: move the global ech and vidh variables into struct ubi_attach_infoBoris Brezillon2-20/+23
Even if it works fine with those global variables, attaching the temporary ech and vidh objects used during UBI scan to the ubi_attach_info object sounds like a more future-proof option. For example, attaching several UBI devices in parallel is prevented by this use of global variable. And also because global variables should be avoided in general. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: provide helpers to allocate and free aeb elementsBoris Brezillon4-38/+66
This not only hides the aeb allocation internals (which is always good in case we ever want to change the allocation system), but also helps us factorize the initialization of some common fields (ec and pnum). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fastmap: use ubi_io_{read, write}_data() instead of ubi_io_{read, write}()Boris Brezillon1-5/+5
ubi_io_{read,write}_data() are wrappers around ubi_io_{read/write}() that are used to read/write eraseblock payload data, which is exactly what fastmap does when calling ubi_io_{read,write}(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fastmap: use ubi_rb_for_each_entry() in unmap_peb()Boris Brezillon1-6/+2
Use the ubi_rb_for_each_entry() macro instead of open-coding it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: factorize destroy_av() and ubi_remove_av() codeBoris Brezillon1-13/+12
Those functions are pretty much doing the same thing, except ubi_remove_av() is putting the aeb elements attached to the volume into the ai->erase list and the destroy_av() is freeing them. Rework destroy_av() to handle both cases. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: factorize code used to manipulate volumes at attach timeBoris Brezillon3-67/+112
Volume creation/search code is duplicated in a few places (fastmap and non fastmap code). Create some helpers to factorize the code. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: use vol->usable_leb_size instead of (ubi->leb_size - vol->data_pad)Boris Brezillon1-1/+1
vol->usable_size is already set to ubi->leb_size - vol->data_pad. Use vol->usable_size instead of recalculating it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC headerBoris Brezillon1-3/+4
scan_pool() does not mark the PEB for scrubing when bitflips are detected in the EC header of a free PEB (VID header region left to 0xff). Make sure we scrub the PEB in this case. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fastmap: avoid multiple be32_to_cpu() when unneccesaryBoris Brezillon1-4/+4
process_pool_aeb() does several times the be32_to_cpu(new_vh->vol_id) operation. Create a temporary variable and do it once. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fix add_fastmap() to use the vid_hdr passed in argumentBoris Brezillon1-2/+2
add_fastmap() is passed a ubi_vid_hdr pointer in argument, but is referencing the global vidh pointer. Even if this is correct from a functional point of view (vidh and vid_hdr point to the same object), it is confusing. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fastmap: use ubi_find_volume() instead of open coding itBoris Brezillon1-20/+3
process_pool_aeb() re-implements the logic found in ubi_find_volume(). Call ubi_find_volume() to avoid this duplication. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-09-28mtdpart: Propagate _get/put_device()Richard Weinberger1-0/+18
If the master device has callbacks for _get/put_device() and this MTD has slaves a get_mtd_device() call on paritions will never issue the registered callbacks. Fix this by propagating _get/put_device() down. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-09-28Merge tag 'for-linus-20160928' of git://git.infradead.org/linux-mtdLinus Torvalds2-1/+4
Pull late MTD fixes from Brian Norris: "Another round of MTD fixes for v4.8 My apologies for sending this so late. I've been fairly absent as a maintainer this cycle, but I did queue these up weeks ago. In the meantime, Richard was able to handle some other fixes (thanks!) but didn't pick these up. On the bright side, these are very simple changes that should carry little risk. Summary: - Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC - OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused error-handling cases in other configurations/code-paths; this fixes the fix" * tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd: mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed
2016-09-23mtd: nand: Provide nand_cleanup() function to free NAND related resourcesRichard Weinberger1-7/+15
Provide a nand_cleanup() function to free all nand related resources without unregistering the mtd device. This should allow drivers to call mtd_device_unregister() and handle its return value and still being able to cleanup all nand related resources. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Walter <dwalter@sigma-star.at> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTDBoris Brezillon1-1/+1
We are about to drop the OF_MTD Kconfig option. Test CONFIG_OF activation instead of CONFIG_OF_MTD. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: Fix nand_command_lp() for 8bits opcodesBoris Brezillon1-1/+4
8 bits opcodes should be followed by a single address cycle. Make the 2nd address cycle dependent of !nand_opcode_8bits(command). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: sunxi: Support ECC maximizationBoris Brezillon1-0/+29
Setup the maximum ECC config when NAND_ECC_MAXIMIZE is set. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: Support maximizing ECC when using software BCHBoris Brezillon1-0/+20
Add support for ECC maximization when software BCH with nand_ooblayout_lp_ops layout is used. Other cases should be handled by the NAND controller driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: Add an option to maximize the ECC strengthBoris Brezillon1-0/+3
The generic NAND DT bindings allows one to tweak the ECC strength and step size to their need. It can be used to lower the ECC strength to match a bootloader/firmware config, but might also be used to get a better reliability. In the latter case, the user might want to use the maximum ECC strength without having to explicitly calculate the exact value (this value not only depends on the OOB size, but also on the NAND controller, and can be tricky to extract). Add a generic 'nand-ecc-maximize' DT property and the associated NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best ECC strength and step-size on their own. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org>
2016-09-23mtd: nand: mxc: Add timing setup for v2 controllersSascha Hauer1-2/+82
So far we relied on reset default or the bootloader to configure a suitable clk rate for the Nand controller. This works but we can optimize the timing for better performance. This sets the clk rate for v2 controllers (i.MX25/35) based on the timing mode read from the ONFI parameter page. This may also enable the symmetric mode (aks EDO mode) if necessary which reads one word per clock cycle. Tested on an i.MX25 with a Micron MT29F4G08ABBDAHC attached. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: mxc: implement onfi get/set featuresSascha Hauer1-0/+55
To be able to support different ONFI timing modes we have to implement the onfi_set_features and onfi_get_features. Tested on an i.MX25 SoC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: sunxi: switch from manual to automated timing configSascha Hauer1-62/+14
The NAND framework is now able to select the best NAND timings for us. All we have to do is implement a ->setup_data_interface() function to apply those timings and remove the timing selection code from the sunxi driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: automate NAND timings selectionBoris Brezillon1-0/+157
The NAND framework provides several helpers to query timing modes supported by a NAND chip, but this implies that all NAND controller drivers have to implement the same timings selection dance. Also currently NAND devices can be resetted at arbitrary places which also resets the timing for ONFI chips to timing mode 0. Provide a common logic to select the best timings based on ONFI or ->onfi_timing_mode_default information. Hook this into nand_reset() to make sure the new timing is applied each time during a reset. NAND controller willing to support timings adjustment should just implement the ->setup_data_interface() method. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2016-09-23mtd: nand: Expose data interface for ONFI mode 0Sascha Hauer1-0/+11
The nand layer will need ONFI mode 0 to use it as timing mode before and right after reset. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>