summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/ubi/attach.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23ubi: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1373884 ("Missing break in switch") Addresses-Coverity-ID: 114869 ("Missing break in switch") Addresses-Coverity-ID: 114870 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: introduce the VID buffer conceptBoris Brezillon1-19/+21
Currently, all VID headers are allocated and freed using the ubi_zalloc_vid_hdr() and ubi_free_vid_hdr() function. These functions make sure to align allocation on ubi->vid_hdr_alsize and adjust the vid_hdr pointer to match the ubi->vid_hdr_shift requirements. This works fine, but is a bit convoluted. Moreover, the future introduction of LEB consolidation (needed to support MLC/TLC NANDs) will allows a VID buffer to contain more than one VID header. Hence the creation of a ubi_vid_io_buf struct to attach extra information to the VID header. We currently only store the actual pointer of the underlying buffer, but will soon add the number of VID headers contained in the buffer. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: move the global ech and vidh variables into struct ubi_attach_infoBoris Brezillon1-20/+19
Even if it works fine with those global variables, attaching the temporary ech and vidh objects used during UBI scan to the ubi_attach_info object sounds like a more future-proof option. For example, attaching several UBI devices in parallel is prevented by this use of global variable. And also because global variables should be avoided in general. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: provide helpers to allocate and free aeb elementsBoris Brezillon1-18/+51
This not only hides the aeb allocation internals (which is always good in case we ever want to change the allocation system), but also helps us factorize the initialization of some common fields (ec and pnum). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: factorize destroy_av() and ubi_remove_av() codeBoris Brezillon1-13/+12
Those functions are pretty much doing the same thing, except ubi_remove_av() is putting the aeb elements attached to the volume into the ai->erase list and the destroy_av() is freeing them. Rework destroy_av() to handle both cases. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: factorize code used to manipulate volumes at attach timeBoris Brezillon1-43/+108
Volume creation/search code is duplicated in a few places (fastmap and non fastmap code). Create some helpers to factorize the code. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02UBI: fix add_fastmap() to use the vid_hdr passed in argumentBoris Brezillon1-2/+2
add_fastmap() is passed a ubi_vid_hdr pointer in argument, but is referencing the global vidh pointer. Even if this is correct from a functional point of view (vidh and vid_hdr point to the same object), it is confusing. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Be more paranoid while seaching for the most recent FastmapRichard Weinberger1-4/+24
Since PEB erasure is asynchornous it can happen that there is more than one Fastmap on the MTD. This is fine because the attach logic will pick the Fastmap data structure with the highest sequence number. On a not so well configured MTD stack spurious ECC errors are common. Causes can be different, bad hardware, wrong operating modes, etc... If the most current Fastmap renders bad due to ECC errors UBI might pick an older Fastmap to attach from. While this can only happen on an anyway broken setup it will show completely different sympthoms and makes finding the root cause much more difficult. So, be debug friendly and fall back to scanning mode of we're facing an ECC error while scanning for Fastmap. Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Rework Fastmap attach base codeRichard Weinberger1-30/+69
Introduce a new list to the UBI attach information object to be able to deal better with old and corrupted Fastmap eraseblocks. Also move more Fastmap specific code into fastmap.c. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Introduce vol_ignored()Richard Weinberger1-6/+18
This makes the logic more easy to follow. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29ubi: Fix scan_fast() commentRichard Weinberger1-1/+1
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-10-03UBI: drop null test before destroy functionsJulia Lawall1-3/+1
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-26UBI: Fastmap: Fall back to scanning mode after ECC errorRichard Weinberger1-1/+1
If we encounter an uncorrectable ECC error while scanning for the fastmap UBI must not fail hard. Instead fall back to scanning mode. Reported-by: Alexander Block <Alexander.Block@continental-corporation.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-26UBI: Fastmap: Make self_check_eba() depend on fastmap self checkingRichard Weinberger1-1/+1
...instead of generic self checking. Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-26UBI: Remove alloc_ai() slab name from parameter listRichard Weinberger1-6/+6
There is always exactly one ubi_attach_info object allocated, therefore we don't have to care about the name. Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-26UBI: Fastmap: Fix memory leak while attachingRichard Weinberger1-28/+33
Currently we leak a few ubi_ainf_pebs while attaching. Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-26UBI: account for bitflips in both the VID header and dataBrian Norris1-1/+1
We are completely discarding the earlier value of 'bitflips', which could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the bitwise OR of header and data 'bitflip' statuses instead. Coverity CID #1226856 Cc: stable <stable@vger.kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-11-07UBI: Extend UBI layer debug/messaging capabilitiesTanya Brokhman1-60/+66
If there is more then one UBI device mounted, there is no way to distinguish between messages from different UBI devices. Add device number to all ubi layer message types. The R/O block driver messages were replaced by pr_* since ubi_device structure is not used by it. Amended a bit by Artem. Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-01-02UBI: fix error return codeJulia Lawall1-1/+3
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Richard Weinberger <richard@nod.at>
2013-10-03UBI: simplify image sequence testRichard Genoud1-3/+2
The test: if (!a && b) a = b; can be symplified in: if (!a) a = b; And there's no need to test if ubi->image_seq is not null, because if it is, it is set to image_seq. So, we just test if image_seq is not null. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-10-03UBI: Call scan_all() with correct offset in error caseRichard Weinberger1-2/+4
If we find an invalid fastmap we have to scan from the very beginning. Otherwise we leak the first 64 PEBs. Reported-and-tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: introduce helpers dbg_chk_{io, gen}Ezequiel Garcia1-2/+2
With this patch code is a bit more readable and there's no generated code or functionality impact. Furthermore, this abstracts implementation details and will allow to change ubi_debug_info in a less invasive way. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-26UBI: do not allocate the memory unnecessarilyArtem Bityutskiy1-12/+7
UBI reserves an LEB sized buffer for various needs. We can use this buffer while scanning, instead of allocating another one. This patch was originally created by Jan Luebbe <jlu@pengutronix.de>, but then he dropped it and I picked up and tweaked a little bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap stuff to attach.cRichard Weinberger1-128/+258
- Export compare_lebs() as fastmap needs this function. - Implement fastmap scan logic. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26UBI: fix trivial typo 'it' => 'is'Brian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print lessArtem Bityutskiy1-4/+4
UBI currently prints a lot of information when it mounts a volume, which bothers some people. Make it less chatty - print only important information by default. Get rid of 'dbg_msg()' macro completely. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: use pr_ helper instead of printkArtem Bityutskiy1-3/+3
Use 'pr_err()' instead of 'printk(KERN_ERR', etc. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: comply with coding styleArtem Bityutskiy1-15/+13
Join all the split printk lines in order to stop checkpatch complaining. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: erase free PEB with bitflip in EC headerMatthieu CASTET1-1/+1
Without this patch, these PEB are not scrubbed until we put data in them. Bitflip can accumulate latter and we can loose the EC header (but VID header should be intact and allow to recover data). Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-21UBI: add volume id struct ubi_ainf_pebJoel Reardon1-15/+31
This patch adds the volume id to struct ubi_ainf_peb when scanning the LEBs at startup. PEBs now added to the erase queue will know their original LEB number and volume id, if available, and will be -1 otherwise (for instance, if the VID header is unreadable). This was tested by creating an ubi device with 3 volumes and disabiling the ubi_thread's do_work functionality. The different ubi volumes were formatted to ubifs and had files created and erased. The ubi modules was reloaded and the list of LEB's added to the erased list was outputted, confirming the volume ids and LEB numbers were appropriate. Signed-off-by: Joel Reardon <reardonj@inf.ethz.ch> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-20UBI: rename scan.c to attach.cArtem Bityutskiy1-0/+1615
Finally, rename the scan.c file. Now adding fastmap support won't look that hacky anymore. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 01:24:37 +0000