summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/tests
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11mtd: nandbiterrs: Support for NAND biterrors test on platforms without raw writeIwo Mergler1-1/+1
Support for NAND biterrors test on platforms without raw write While the default test mode relies on raw write (mtd_write_oob) to introduce bit errors into a page, the rewrite test mode doesn't need it. Changed the overwrite test to use normal writes. The default test mode is unaffected and still requires raw write as before. Signed-off-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-03-24Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds1-25/+24
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
2016-03-07mtd: kill the ecclayout->oobavail fieldBoris BREZILLON1-25/+24
ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-04mtd: nand: tests: fix regression introduced in mtd_nandectestJorge Ramirez-Ortiz1-1/+1
Offending Commit: 6e94119 "mtd: nand: return consistent error codes in ecc.correct() implementations" The new error code was not being handled properly in double bit error detection. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-06mtd: tests: consolidate kmalloc/memset 0 call to kzallocNicholas Mc Guire1-2/+1
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: tests: Replace timeval with ktime_tShraddha Barke2-10/+10
Changes the 32-bit time type timeval to the 64-bit time type ktime_t, since 32-bit systems using struct timeval will break in the year 2038. Correspondingly change do_gettimeofday() to ktime_get() since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval.Here, ktime_get() is used instead of ktime_get_real() since ktime_get() uses monotonic clock. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-27mtd: mtd_oobtest: Fix the address offset with vary_offset caseRoger Quadros1-6/+12
When vary_offset is set (e.g. test case 3), the offset is not always zero so memcmpshow() will show the wrong offset in the print message. To fix this we introduce a new function memcmpshowoffset() which takes offset as a parameter and displays the right offset and use it in the case where offset is non zero. The old memcmpshow() functionality is preserved by converting it into a macro with offset preset to 0. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-14mtd: readtest: don't clobber error reportsBrian Norris1-2/+4
Commit 2a6a28e7922c ("mtd: Make MTD tests cancelable") accidentally clobbered any read failure reports. Coverity CID #1296020 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05mtd: Make MTD tests cancelableRichard Weinberger10-24/+120
I always go nuts when I start an MTD test on a slow device and have to wait forever until it finishes. From the debug output I already know what the issue is but I have to wait or reset the board hard. Resetting is often not an option (remote access, you don't want lose the current state, etc...). The solution is easy, check for pending signals at key positions in the code. Using that one can even stop a test by pressing CTRL-C as insmod/modprobe have SIGINT pending. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05mtd: mtd_oobtest: Fix bitflip_limit usage in test case 3Roger Quadros1-27/+35
In test case 3, we set vary_offset to write at different offsets and lengths in the OOB available area. We need to do the bitflip_limit check while checking for 0xff outside the OOB offset + length area that we didn't modify during write. Signed-off-by: Roger Quadros <rogerq@ti.com> [Brian: whitespace fixup] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11mtd: tests: fix more potential integer overflowsBrian Norris5-10/+10
Caught by Coverity (CID #200625 and others) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
2014-12-12mtd: tests: abort torturetest on erase errorsBrian Norris1-1/+3
The torture test should quit once it actually induces an error in the flash. This step was accidentally removed during refactoring. Without this fix, the torturetest just continues infinitely, or until the maximum cycle count is reached. e.g.: ... [ 7619.218171] mtd_test: error -5 while erasing EB 100 [ 7619.297981] mtd_test: error -5 while erasing EB 100 [ 7619.377953] mtd_test: error -5 while erasing EB 100 [ 7619.457998] mtd_test: error -5 while erasing EB 100 [ 7619.537990] mtd_test: error -5 while erasing EB 100 ... Fixes: 6cf78358c94f ("mtd: mtd_torturetest: use mtd_test helpers") Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <stable@vger.kernel.org>
2014-11-20mtd: oobtest: correct printf() format specifier for 'size_t'Brian Norris1-1/+1
Fixes warning: drivers/mtd/tests/oobtest.c: In function 'memcmpshow': drivers/mtd/tests/oobtest.c:129: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>
2014-11-19mtd: mtd_oobtest: add bitflip_limit parameterRoger Quadros1-18/+47
It is common for NAND devices to have bitflip errors. Add a bitflip_limit parameter to specify how many bitflips per page we can tolerate without flagging an error. By default zero bitflips are tolerated. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-19mtd: mtd_oobtest: Show the verification error location and dataRoger Quadros1-7/+29
Add a function memcmpshow() that compares the 2 data buffers and shows the address:offset and data bytes on comparison failure. This function does not break at a comparison failure but runs the check for the whole data buffer. Use memcmpshow() instead of memcmp() for all the verification paths. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: tests: fix integer overflow issuesBrian Norris7-22/+22
These multiplications are done with 32-bit arithmetic, then converted to 64-bit. We should widen the integers first to prevent overflow. This could be a problem for large (>4GB) MTD's. Detected by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
2014-04-17mtd: mtd_oobtest: generate consistent data for verificationAkinobu Mita1-7/+10
mtd_oobtest writes OOB, read it back and verify. The verification is not correctly done if oobsize is not multiple of 4. Although the data to be written and the data to be compared are generated by several prandom_byte_state() calls starting with the same seed, these two are generated with the different size and different number of calls. Due to the implementation of prandom_byte_state() if the size on each call is not multiple of 4, the resulting data is not always same. This fixes it by just calling prandom_byte_state() once and using correct range instead of calling it multiple times for each. Reported-by: George Cherian <george.cherian@ti.com> Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: George Cherian <george.cherian@ti.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [Brian: dropped one incorrect hunk] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: tests: mtd_nandecctest: Use IS_ENABLED() macroFabio Estevam1-1/+1
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-27mtd: nand: add a helper to detect the nand typeHuang Shijie4-4/+4
This helper detects that whether the mtd's type is nand type. Now, it's clear that the MTD_NANDFLASH stands for SLC nand only. So use the mtd_type_is_nand() to replace the old check method to do the nand type (include the SLC and MLC) check. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-08-30mtd: tests: incorporate error message for mtdtest_write()Akinobu Mita5-50/+12
All callers of mtdtest_write() print the same error message on failure. This incorporates the error message to mtdtest_write() and removes them from the callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: incorporate error message for mtdtest_read()Akinobu Mita5-76/+17
All callers of mtdtest_read() print the same error message on failure. This incorporates the error message to mtdtest_read() and removes them from the callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_nandbiterrs: use mtd_test helpersAkinobu Mita1-33/+6
Use mtdtest_write() and mtdtest_erase_eraseblock() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Iwo Mergler <Iwo.Mergler@netcommwireless.com.au> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_torturetest: use mtd_test helpersAkinobu Mita1-59/+7
Use mtdtest_scan_for_bad_eraseblocks() and mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_subpagetest: use mtd_test helpersAkinobu Mita1-78/+9
Use mtdtest_scan_for_bad_eraseblocks() and mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_stresstest: use mtd_test helpersAkinobu Mita1-74/+12
Use mtdtest_read(), mtdtest_write(), mtdtest_erase_eraseblock(), and mtdtest_scan_for_bad_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_speedtest: use mtd_test helpersAkinobu Mita1-144/+36
Use mtdtest_write(), mtdtest_read(), mtdtest_scan_for_bad_eraseblocks(), mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_readtest: use mtd_test helpersAkinobu Mita1-41/+8
Use mtdtest_read() and mtdtest_scan_for_bad_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_pagetest: use mtd_test helpersAkinobu Mita1-147/+58
Use mtdtest_write(), mtdtest_read(), mtdtest_erase_eraseblock(), mtdtest_scan_for_bad_eraseblocks(), and mtdtest_erase_good_eraseblocks() in mtd_test helpers. [dwmw2: merge later 'remove always true condition' fix] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_oobtest: use mtd_test helpersAkinobu Mita1-80/+12
Use mtdtest_scan_for_bad_eraseblocks(), mtdtest_erase_good_eraseblocks(), and mtdtest_erase_eraseblock() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: rename sources in order to link a helper objectAkinobu Mita9-0/+9
Each mtd test module have a single source whose name is the same as the module name. In order to link a single object including helper functions to every test module, this rename these sources to the different names. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: introduce helper functionsAkinobu Mita2-0/+121
This introduces the helper functions which can be used by several mtd/tests modules. The following three functions are used all over the test modules. - mtdtest_erase_eraseblock() - mtdtest_scan_for_bad_eraseblocks() - mtdtest_erase_good_eraseblocks() The following are wrapper functions for mtd_read() and mtd_write() which can simplify the return value check. - mtdtest_read() - mtdtest_write() All helpers are put into a single .c file and it will be linked to every test module later. The code will actually be copied to every test module, but it is fine for our small test infrastructure. [dwmw2: merge later 'return -EIO when mtdtest_read() failed' fix] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: tests: don't print error messages when out-of-memoryBrian Norris6-54/+18
These strings are now unnecessary and discouraged in the kernel. The kernel will have plenty of big scary messages if kmalloc fails. These now only serve to bloat the module. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-02Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds3-23/+20
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
2013-02-27mtd: mtd_stresstest: use prandom_bytes()Akinobu Mita1-2/+1
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_subpagetest: convert to use prandom libraryAkinobu Mita1-30/+12
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_speedtest: use prandom_bytesAkinobu Mita1-8/+1
Use prandom_bytes instead of equivalent local function. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_pagetest: convert to use prandom libraryAkinobu Mita1-30/+13
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_oobtest: convert to use prandom libraryAkinobu Mita1-33/+16
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_nandecctest: use prandom_bytes instead of get_random_bytes()Akinobu Mita1-1/+1
Using prandom_bytes() is enough. Because this data is only used for testing, not used for cryptographic use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-13mtd: mtd_torturetest can cause stack overflowsAl Cooper1-14/+11
mtd_torturetest uses the module parm "ebcnt" to control the size of a stack based array of int's. When "ebcnt" is large, Ex: 1000, it causes stack overflows on systems with small kernel stacks. The fix is to move the array from the stack to kmalloc memory. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: rename random32() to prandom_u32()Akinobu Mita2-9/+9
Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04mtd: tests/read: initialize buffer for whole next pageChristian Herzig1-1/+1
fix: do block-buffer initialize for the whole next page to zero. Signed-off-by: Christian Herzig <christian.herzig@keymile.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18mtd: Fix typo mtd/testsMasanari Iida7-8/+8
Correct spelling typo in printk within drivers/mtd/tests. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: mtd_oobtest: printk -> pr_{info,err,crit}Vikram Narayanan1-87/+84
Use pr_info() and pr_err() while defining pr_fmt(). This saves a few characters, joins a few lines, and makes the code a little more readable (and grep-able). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: tests: mtd_torturetest: Replace printk with pr_{info,crit}Vikram Narayanan1-36/+37
Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: tests: mtd_subpagetest: replace printk with pr_{info,crit,err}Vikram Narayanan1-62/+62
Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: tests: mtd_speedtest: Replace printk with pr_{info,crit,err}Vikram Narayanan1-44/+44
Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: tests: mtd_stresstest: Replace printk with pr_{info,crit,err}Vikram Narayanan1-22/+22
Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 19:22:10 +0000