summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds1-38/+23
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman1-38/+23
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-18mxc_nand: do not depend on disabling the irq in the interrupt handlerSascha Hauer1-9/+83
This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock1-1/+1
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-29fix OMAP2 MTD build failureDaniel J Blueman1-1/+1
Fix build failure from recent interface change and merge. Tested on OMAP3430. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-24nand: davinci: add support for timing configurationSekhar Nori1-38/+22
This patch modifies the DaVinci NAND driver to use the new AEMIF timing setup API to configure the NAND access timings. Earlier, AEMIF configuration was being done as a special case for DM644x board, but now more boards emerge which have capability to boot for other media (SPI flash, NOR flash) and have the kernel access NAND flash. This means that kernel cannot always depend on the bootloader to setup the NAND. Also, on platforms such as da850/omap-l138, the aemif input frequency changes as cpu frequency changes; necessiating re-calculation of timimg values as part of cpufreq transtitions. This patch forms the basis for adding that support. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-09-24davinci: add support for aemif timing configurationSekhar Nori1-0/+1
This patch adds support to configure the AEMIF interface with supplied timing values. Since this capability is useful both from NOR and NAND flashes, it is provided as a new interface and in a file of its own. AEMIF timing configuration is required in cases: 1) Where the AEMIF clock rate can change at runtime (a side affect of cpu frequency change). 2) Where U-Boot does not support NAND/NOR but supports other media like SPI Flash or MMC/SD and thus does not care about setting up the AEMIF timing for kernel to use. 3) Where U-Boot just hasn't configured the timing values and cannot be upgraded because the box is already in the field. Since there is now a header file for AEMIF interface, the common (non-NAND specific) defines for AEMIF registers have been moved from nand.h into the newly created aemif.h Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-13mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not definedMark F. Brown1-0/+6
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: mxc_nand: configure pages per block for v2 controllerSascha Hauer1-14/+19
This patch initializes the pages per block field in CONFIG1 for v2 controllers. It also sets the FP_INT field. This is the last field not correctly initialized, so we can switch from read/modify/write the CONFIG1 reg to just write the correct value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix invalid free in remove()Mike Frysinger1-6/+1
Since info->mtd isn't dynamically allocated, we shouldn't attempt to kfree() it. Otherwise we get random fun corruption when unloading the driver built as a module. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix build error after nand_scan_ident() changeMike Frysinger1-1/+1
Seems some patches got out sync when being merged. The Blackfin NFC driver was updated to use nand_scan_ident(), but it missed the change where nand_scan_ident() now takes 3 arguments. So update this driver to fix build failures. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-27mxc_nand: Do not do byte accesses to the NFC buffer.John Ogness1-7/+7
This patch avoids byte access to the NFC buffer. Byte access to the NFC is not allowed. The patch is against linux-next 20100618. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-20mtd: nand: Fix probe of Samsung NAND chipsTilman Sauerbeck1-0/+1
Apparently, the check for a 6-byte ID string introduced by commit 426c457a3216fac74e3d44dd39729b0689f4c7ab ("mtd: nand: extend NAND flash detection to new MLC chips") is NOT sufficient to determine whether or not a Samsung chip uses their new MLC detection scheme or the old, standard scheme. This adds a condition to check cell type. Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-19mtd: nand: Fix regression in BBM detectionBrian Norris1-7/+3
Commit c7b28e25cb9beb943aead770ff14551b55fa8c79 ("mtd: nand: refactor BB marker detection") caused a regression in detection of factory-set bad block markers, especially for certain small-page NAND. This fix removes some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the detection code more correct. This regression can be seen, for example, in Hynix HY27US081G1M and similar. Signed-off-by: Brian Norris <norris@broadcom.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-18pxa3xx: fix ns2cycle equationAxel Lin1-1/+1
Test on a PXA310 platform with Samsung K9F2G08X0B NAND flash, with tCH=5 and clk is 156MHz, ns2cycle(5, 156000000) returns -1. ns2cycle returns negtive value will break NDTR0_tXX macros. After checking the commit log, I found the problem is introduced by commit 5b0d4d7c8a67c5ba3d35e6ceb0c5530cc6846db7 "[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately" To get num of clock cycles, we use below equation: num of clock cycles = time (ns) / one clock cycle (ns) + 1 We need to add 1 cycle here because integer division will truncate the result. It is possible the developers set the Min values in SPEC for timing settings. Thus the truncate may cause problem, and it is safe to add an extra cycle here. The various fields in NDTR{01} are in units of clock ticks minus one, thus we should subtract 1 cycle then. Thus the correct equation should be: num of clock cycles = time (ns) / one clock cycle (ns) + 1 - 1 = time (ns) / one clock cycle (ns) Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds4-322/+200
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-13mtd/nand_ids: Fix buswidthBrian Norris1-1/+1
The buswidth for chips of ID 0xD7 is x8, not x16. This was my previous typo. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds6-13/+13
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-12gen_nand: Test if nr_chips field is validMarek Vasut1-0/+5
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: move all hardware initialization work to denali_hw_initChuanxiao Dong1-5/+6
All hardware initialization will be done in denali_hw_init before irq handler registered Change mtd name from "DENALI NAND" to be "denali-nand" since whitespace in name can cause problems if we use cmdlinepart Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Add a page check in denali_read_page & denali_read_page_rawChuanxiao Dong1-0/+14
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: use cpu_relax() while waiting for hardware interruptChuanxiao Dong1-2/+2
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: change read_status function methodChuanxiao Dong1-7/+5
In mtd->write, Denali controller will use MODE_11 mode to read NAND flash status, then return back to MODE_1O mode to do page write. Here comes a bug for this kind of using, sometimes controller will not write data to NAND and just return a good interrupt to tell driver writing work is done. The data in this page is all 0xff and this page can not be written again. The reason is unknow. So read Denali controller register WRITE_PROTECT to get NAND status instead. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Fixed check patch warningsChuanxiao Dong1-12/+13
waring: no space for starting a line Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap1-19/+20
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap1-19/+20
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: use dev_xx debug function to replace nand_dbg_print and some printkChuanxiao Dong2-184/+42
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: Fixed handle ECC error bugsChuanxiao Dong1-16/+29
Once the last ECC error was handled, controller will triger an interrupt. If this interrupt can not be clean on time, controller may corrupt. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: use iowrite32() to replace denali_write32()Chuanxiao Dong1-76/+62
denali_write32() just implements a debug function for iowrite32(), only print out the write value. Remove this function since it's useless Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: Fixed probe function bugsChuanxiao Dong1-21/+23
Fixed a pci_resource_len function error; Changed returning sequence of probe function; Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-10Merge git://git.infradead.org/mtd-2.6Linus Torvalds17-1165/+1216
* git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
2010-08-08mtd: Remove obsolete <mtd/compatmac.h> includeDavid Woodhouse4-4/+0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08Merge branch 'omap-for-linus' of ↵Linus Torvalds1-163/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits) omap: mailbox: reorganize headers omap: mailbox: standarize on 'omap-mailbox' omap: mailbox: only compile for configured archs omap: mailbox: simplify omap_mbox_register() omap: mailbox: reorganize registering omap: mailbox: add IRQ names omap: mailbox: remove unecessary fields omap: mailbox: don't export unecessary symbols omap: mailbox: update omap1 probing omap: mailbox: use correct config for omap1 omap: mailbox: 2420 should be detected at run-time omap: mailbox: reorganize structures omap: mailbox: trivial cleanups omap mailbox: Set a device in logical mbox instance for traceability omap: mailbox: convert block api to kfifo omap: mailbox: remove (un)likely macros from cold paths omap: mailbox cleanup: split MODULE_AUTHOR line omap: mailbox: convert rwlocks to spinlock Mailbox: disable mailbox interrupt when request queue Mailbox: new mutext lock for h/w mailbox configuration ...
2010-08-06mxc_nand: Add v3 (i.MX51) SupportSascha Hauer2-2/+222
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: support 8bit eccSascha Hauer1-0/+30
Nand devices with at least 26 bytes of oob data per 512 byte block can have 8bit ecc on v2 type controllers. This is currently not tested, but at least this patch puts the ECC_MODE bit into a well defined state. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: fix correct_data functionSascha Hauer1-2/+40
The v2 controller has a totally different mechanism to check whether the data we read had ecc errors or not. Implement this. The mechanism in the v2 controller happens to be identical to the v3 controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: add V1_V2 namespace to registersSascha Hauer1-78/+63
This prepares the driver for v3 support. The v3 controller has a completely different register layout, so add a V1_V2_ namespace to the register defines to avoid confusion with the v3 regs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: factor out a check_int functionSascha Hauer1-13/+19
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: make some internally used functions overwriteableSascha Hauer1-28/+44
This patch prepares the driver to add v3 controller support later. The v3 controller is basically the same controller as v1 and v2, but with a completely different register layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: rework get_dev_statusSascha Hauer1-12/+9
We save/restore the value in the buffer anyway, so it makes no difference whether we use main_area0 or main_area1. So, we can use main_area0 and remove main_area1 from the driver which is otherwise unused. Also, clean up the comments in get_dev_status. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: remove 0xe00 offset from registersSascha Hauer1-18/+18
Add the offset to the register base instead. This is done in preparation for v3 controller support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Add multi connected NAND supportChuanxiao Dong2-1/+22
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove set_ecc_config functionChuanxiao Dong2-40/+48
set_ecc_config function only set ECC_CORRECTION register, so move register setting to probe function. Since controller only support 15bit and 8bit ecc correction, updated nand ecc layout information. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove unuseful code in get_xx_nand_para functionsChuanxiao Dong1-74/+7
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove device_info_tag structureChuanxiao.Dong2-305/+37
Hi David, I sent 4 patches using my intel email account. If there is any problem about the format of these patches, I will resend them after I arrived at home by using my gmail account, and I will keep on using gmail account to send patches. Thanks. >From 242e3bf5e17f54b1df8cf285154a7c7a61ff62e9 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Fri, 6 Aug 2010 15:29:41 +0800 Subject: [PATCH 1/4] mtd: denali: Remove device_info_tag structure. Most of the variables in this structure are useless, so just remove this structure and relevant codes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely6-13/+13
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06mtd: atmel_nand: fix warning: 'part_probes' defined but not usedAndreas Bießmann1-1/+1
This patch fixes drivers/mtd/nand/atmel_nand.c:372: warning: 'part_probes' defined but not used which is issued when CONFIG_MTD_PARTITIONS is defined but CONFIG_MTD_CMDLINE_PARTS not. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: Missing slab.h includeDavid Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: gen_nand: fix support for multiple chipsMarek Vasut1-1/+1
This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 01:37:33 +0000