summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/mtk_nand.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-07mtd: rawnand: Move ->setup_data_interface() to nand_controller_opsBoris Brezillon1-1/+1
->setup_data_interface() is a controller specific method and should thus be placed in nand_controller_ops. In order to make that work with controllers that support keeping pre-configured timings we need to add a new NAND_KEEP_TIMINGS flag to inform the core it should skip the timings selection step. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the ->select_chip() hookBoris Brezillon1-1/+1
Now that the CS line to be selected is passed to ->exec_op() and stored in chip->cur_cs and after patching all drivers implementing ->exec_op() to stop implementing this method, we can deprecate it by moving it to the nand_legacy structure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon1-4/+4
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_data_interface() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon1-2/+3
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->select_chip()Boris Brezillon1-3/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon1-4/+4
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon1-4/+3
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon1-10/+9
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon1-11/+12
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: mtk: convert driver to nand_scan()Miquel Raynal1-31/+44
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Xiaolei Li <xiaolei.li@mediatek.com>
2018-07-31mtd: rawnand: better name for the controller structureMiquel Raynal1-1/+1
In the raw NAND core, a NAND chip is described by a nand_chip structure, while a NAND controller is described with a nand_hw_control structure which is not very meaningful. Rename this structure nand_controller. As the structure gets renamed, it is logical to also rename the core function initializing it from nand_hw_control_init() to nand_controller_init(). Lastly, the 'hwcontrol' entry of the nand_chip structure is not meaningful neither while it has the role of fallback when no controller structure is provided by the driver (the controller driver is dumb and can only control a single chip). Thus, it is renamed dummy_controller. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-19mtd: rawnand: use mtd_device_register() where applicableRafał Miłecki1-1/+1
If driver doesn't specify parsers it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-04-29mtd: rawnand: mtk: use of_device_get_match_data()Ryder Lee1-9/+1
The usage of of_device_get_match_data() reduce the code size a bit. Also, the only way to call .probe() is to match an entry in .of_match_table[], so of_device_id cannot be NULL. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon1-0/+1599
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-06 01:38:15 +0000