summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/cafe_nand.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07mtd: rawnand: Deprecate the dummy_controller fieldBoris Brezillon1-1/+1
We try to force NAND controller drivers to properly separate the NAND controller object from the NAND chip one, so let's deprecate the dummy controller object embedded in nand_chip to encourage them to create their own instance. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the ->select_chip() hookBoris Brezillon1-1/+1
Now that the CS line to be selected is passed to ->exec_op() and stored in chip->cur_cs and after patching all drivers implementing ->exec_op() to stop implementing this method, we can deprecate it by moving it to the nand_legacy structure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon1-1/+1
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon1-2/+2
Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->block_{bad,markbad}() hooksBoris Brezillon1-1/+1
Those hooks have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or it was not properly implementing the OOB read/write request or had a weird layout where BBM are trashed. In any case, we should discourage people from overloading those methods and encourage them to fix their driver instead. Move the ->block_{bad,markbad}() hooks to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon1-5/+5
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon1-2/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooksBoris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->block_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->select_chip()Boris Brezillon1-2/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon1-3/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon1-6/+4
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon1-6/+7
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon1-4/+6
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_wait_ready()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_wait_ready()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: cafe: convert driver to nand_scan()Miquel Raynal1-57/+78
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18mtd: rawnand: Kill cafe_nand_bug()Boris Brezillon1-8/+0
Leaving a function pointer to NULL should be enough to trigger a NULL pointer exception, and anyway, if we want to BUG() when some missing hooks are called, this should be done in the core, so let's drop the cafe_nand_bug() dummy function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-04-24rslib: Split rs control structThomas Gleixner1-3/+4
The decoder library uses variable length arrays on stack. To get rid of them it would be simple to allocate fixed length arrays on stack, but those might become rather large. The other solution is to allocate the buffers in the rs control structure, but this cannot be done as long as the structure can be shared by several users. Sharing is desired because the RS polynom tables are large and initialization is time consuming. To solve this split the codec information out of the control structure and have a pointer to a shared codec in it. Instantiate the control structure for each user, create a new codec if no shareable is avaiable yet. Adjust all affected usage sites to the new scheme. This allows to add per instance decoder buffers to the control structure later on. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Cc: Richard Weinberger <richard@nod.at> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Andrew Morton <akpm@linuxfoundation.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-29mtd: rawnand: cafe: fix probe function error pathMiquel Raynal1-1/+5
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: rename SET/GET FEATURES related functionsMiquel Raynal1-2/+2
SET/GET FEATURES are flagged ONFI-compliant because of their name. This is not accurate as non-ONFI NAND chips support it and use it. Rename the hooks and helpers to remove the "onfi" prefix. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-15mtd: rawnand: Replace printk() with appropriate pr_*() macroShreeya Patel1-2/+2
Using pr_<loglevel>() is more concise than printk(KERN_<LOGLEVEL>). Replace printks having a log level with the appropriate pr_*() macros. Define pr_fmt() and remove other additional macros from the replaced printks. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon1-0/+871
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 10:04:20 +0000